We are looking for an experienced Traffic Control Technician (TCT) to join our team!
Must have Drivers License, 1+ year of Traffic Control experience, and HAVE an ATSSA TCT Certification.
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:**Paid Drive Time - Enjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.**Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowMedical, Vision & Dental InsurancePaid Vacation401K MatchedUp to 3K Sign-on Bonus Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 3+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Clean HarborsCharleston, SClocationis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

Overview: It's an exciting time to join Lowes Foods! In addition to being part of a family-owned and growing company, we offer great pay and excellent benefits including Medical, Dental, and Vision, 401K and Pension Plan, a discount for shopping, paid time off, weekly pay, and more!To provide excellent guest service through accurate pricing of merchandise sold.Pay starts at $15/hour Responsibilities: 1. Verify/audit prices in DSD categories, MDI categories, Perishable departments and ad items.2. Update new prices in register system.3. Update new prices on shelf tags and signs.4. Update prices in the computer and on the shelf including displaying signs for discontinued items.5. Audit scan error logs.6. Ensure that all DSD price changes transmitted to the store are properly executed and shelf tags are printed and placed on the shelf (includes advertised and promotional items).7. Perform as a stocker.8. Perform as a cashier.9. Perform all other duties as assigned by management. Qualifications: 1. Friendly, outgoing personality.2. Ability to work well with others.3. Ability to lift 25 lbs. occasionally and 15 lbs. constantly.4. Ability to read and understand information and direction.5. Knowledge of DSD/Scanning operations.6. Ability to work well with computers.7. Demonstrated ability and willingness to learn multiple tasks and technical requirements of the job.8. Effective communication and guest service skills.9. Demonstrate excellent math skills.10. Ability to bend, kneel, and stand for extended periods of time.11. Excellent organizational skills.#boost

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Illinois- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Req ID:25059Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job Description Job Title:Automotive Technician / MechanicLocation: 1475 Folly Road, Charleston, SC 29412Job Overview:This brand-new state-of-the-art facility is scheduled to open in October 2024!We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our customers.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for our customersContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot customer concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate customer concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 285+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

$24.00/HourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. North CharlestonSouth CarolinaUnited States of America

What this job involves: The Maintenance Technician will perform both preventative maintenance & corrective maintenance to mechanical, electrical, and plumbing equipment/systems in assigned facilities. Assists Mechanics in maintenance and repair efforts, as well as independently performing defined tasks. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What your day-to-day will look like: Clean HVAC coils, change filters and belts.Maintain and repair locks, locking mechanisms, closers, doors, and furniture.Maintain and complete documentation for fire extinguishers and other building systems.Maintain and repair plumbing components including toilets, urinals, lavatories, flush valves, sinks, drains, water heaters, piping, and sump pumps.Prepare, prime and paint building interior and exterior surfaces and perform general handyman tasks to maintain buildings.Completes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.Prioritizes all PM’s, corrective and emergent work orders for the site (annual, monthly, weekly, and daily).Update work order status in real time, utilizing CMMS system.Escalating problems or issues to Customer and Manager in a timely manner.Desired or preferred experience and technical skills: EPA Universal LicenseBAS experiencePreventative maintenance on HVAC equipmentRequired Skills and ExperienceHigh School Diploma or equivalent.Experience with hand tools and power tools.Proficient in basic computer application software such as MS Office, Outlook, CMMS (Maximo), etc.Minimum 1 year of related experience and/or training in the areas of carpentry, electrical, and plumbing.#OEjobs

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Able to identify parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $ 26 - $28 / hour #CAZL ExperienceRequired1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

Hepaco, a Clean Harbors company in Ladson, SC is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsReliable transportationValid Driver’s licenseAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Previous relevant labor experience Hepaco, a Clean Harbors company is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Hepaco, a Clean Harbors company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. #HEP #LI-LT1

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: ConGlobal is the industry-leading provider of intermodal rail terminal services, auto loading and unloading and container depot services. We take pride in consistently delivering superior and reliable service, a broad scope of services and an exemplary safety record. We’re currently seeking a Chassis Repair – Maintenance TechnicianChassis Repair – Maintenance Technicians are charged with repairing containers, trailers and chassis. Repair & Replacement work includes but is not limited to; containers, lights, tires, landing legs, brakes and framework. Responsibilities: Chassis Repair – Maintenance TechnicianConducts routine/scheduled maintenance on railroad leased/owned containers and chassisRepairs equipment in accordance with railroad, IEP, manufacturer & FMCSA guidelinesDocuments repairs according to an established reporting system; verbally and in writingRepairs tires, brakes, lights, landing leg and frameworkPerforms light welding when requiredOther duties as assignThis is an exciting time at Conglobal and we’re seeking individuals to join our growing team! We offer full time employees the following; competitive compensation, benefits, 401K & vacation. Qualifications: Minimum of 3-years verifiable mechanic experience in ANYindustryAbility to lift in excess of 50lbsOpen availability (24/7/365)Willingness to work in varying weather conditionsMust have own hand toolsValid Driver’s LicenseMust be willing to complete a drug screen, physical and background check

Overview: Our team at TRS-SESCO is hiring!With over 150 years of experience,CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting.CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily.WHAT WE OFFERWe are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow.Pay from $55/HRSign-on bonus up to $25,000.00WHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus plan.Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K) matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-art training facilityto invest in YOUR career growth.Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much more.Pet InsuranceLegal Plan, and ID Theft ProtectionGeneral Statement of DutiesThe responsibility of an HVAC Service Technician is to perform startup, maintenance, and repair operations pertaining to complex, heating, and cooling systems and associated control systems on light/heavy commercial building, including but not limited to, military bases, hospitals, K-12, and higher education buildings. The technician is responsible for maintaining the quality of work at acceptable company standards, and for representing the company to the customer in a manner that conveys effective communication and a positive working relationship. Responsibilities: Distinguishing Features of the ClassPerform journey-level HVAC work in installation, Start-up and repair of a wide variety of systems that may include RTU, chillers, boilers, heat pumps, air handlers, cooling towers, hydronic systems, multi-zone, VFD, VRF, VAV, VSD systems, gas/electric water heaters, steam and water source systems, controls and automation systems as well as refrigeration: DX, CO2, Glycol, Propane, Ammonia.Scope of work also includes, but is not limited to leading a team, assigning work to semiskilled workers, inspecting work of semi-skilled workers, assisting other skilled HVAC mechanics, working in varying weather, work conditions, and working at varying heights.All work is reviewed by Service Manager and Division Management in progress and upon completion for adherence to established maintenance and repair standards.Work is performed in varying weather and working at varying heights requiring the use of ladders and under established and enforced safety conditions.Illustrative examples of WorkTrain semi-skilled workers in procedures and methods, use of tools, recognition of parts and other skills.Repair: pneumatic thermostats, controls, control circuits, evaporators, condensers, air handlers, chillers, pumps, circulation pumps, supply lines, air compressors, steam/other regulating valves and sensors, energy recovery ventilators (ERV’s) and associated gas packSupervise, participate, and inventory parts, supplies, and tools on service truck.Clean cooling towers, replace filters, lubricate equipment, inspect, and replace parts and components.Pick up parts and supplies from vendors keeping accurate receipts and records on every purchase.Operate computerized scheduling and troubleshooting heating and cooling control system.Operate a variety of hand and power tools.Strict adherence to OSHA safety standards at all times.Adherence to attendance policies.Attendance to training sessions on new technology as it becomes available. Qualifications: Work without direct supervision.Deal diplomatically and effectively with customers.Work within standards of accuracy and make decisions based on measurable criteria; and comprehend technical data.Be physically capable of working easily and skillfully with hands, lift and carry objects, see well (either naturally or with correction,) climb and maintain balance on ladders and scaffolds, and stand, stoop, kneel, or crouch.Have knowledge of current OSHA safety regulations.Have the ability to coordinate and perform multiple activities in a timely manner.Have the ability to maintain a sense of urgency, but remain calm, when handling emergencies.Thorough knowledge of the principles and techniques of the HVAC trade.Thorough knowledge of methods, tools, parts, and equipment used in HVAC trade.Thorough knowledge of occupational hazards and safety precautions in work area.Thorough knowledge of diagnostic troubleshooting of HVAC equipment.General knowledge of diagnostic troubleshooting of direct digital controls.Ability to understand and accurately follow oral and written instructions.Ability to read and interpret service manuals and schematics drawings.Ability to maintain accurately routine records.Ability to exercise the physical strength and agility necessary to perform job tasks, with a minimum of 50 lbs. lifting and carrying capacity and occasional 75 lb. lifting capacity.Ability to establish and maintain effective working relationships with co-workers, sales engineers, and customers.Ability to work overtime/out of town travel on short notice, evenings, weekends, and holidays.Desirable Education and ExperienceGraduation from high school or equivalent.At least 10 years large commercial HVAC experience supplemented by course work in a related trade, or an equivalent combination of education and experience required.HVAC Contractors license preferred.Start Up experience good to have but can train.Special RequirementPossession of a valid driver’s license.Ability to pass pre-employment screening.Hold a valid CFC certification - preferably. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Louisiana- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Pay Range: ($58,934.00- $109,450.00) Target Bonus: 5.0% Req ID:25060Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Hepaco, a Clean Harbors company, in Ladson, SCis looking for aField Service Project Managerto join our team. The FSPMis responsible for managing large scale projects at a variety of customer locations. You will work directly with other team members, Supervisors, as well as the Branch Manager. You will be responsible for the performance of tasks associated with emergency response (emergency spill cleanup), hazardous waste clean-up, site-remediation (tank and pit cleaning), equipment decontamination and handling of hazardous materials. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementCompetitive payPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times.Manages and oversees small to midsize, technically complex projects involving waste site clean-up and construction, building and equipment decontamination and demolition.Prepare proposals, including cost estimates and work scopes and schedules.Acts as an agent of business and is involved with developing relationships with key customers and understanding the customer issues.Ability to provide timely, concise and relevant information to superiors and subordinates.Provides technical support for proposal preparation, project cost estimates and subcontractor selection and procurement.Enforce the policies and procedures as it relates to Health & Safety. Will be measured off the districts health and safety record. Works closely with the Director of Health and Safety and VP of Site Services in resolving issues in an appropriate and timely manner.Performs other duties and tasks as assigned from time to time by management and will be required by the needs of the Hepaco, a Clean Harbors company, business.High school diploma or equivalent required.Associate or bachelor’s degree preferred.3+ years of environmental field service operations experience.Leadership/supervisor experience preferred.Emergency response supervisor training preferred.Strong understanding of equipment operations.Knowledge of federal and state environmental regulation. RequiredQualifications: Environmental Field Service Operations.Cost estimating and computer experience.Strong environmental remediation background and experience.In depth knowledge of remedial technologies.Previous experience working Emergency Response Hepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Hepaco, a Clean Harbors company, is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. *HEP #LI-LT1

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment