We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

The purpose of this job is to repair musical instruments in a timely and proficient manner so that the instrument is returned in good playing order. A technician can specialize in one type of instrument, or work on multiple types. Duty or Responsibility: Works on rental returned instruments in an efficient & timely manner.Ensuring each instrument is repared according to established quality guidelinesMaintain accurate records for production reportingAdditional duties as assigned. About Music & ArtsThe first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 200+ retail stores, 120+ educational representatives, and 300+ affiliate locations.Tojoinourband,you'llneedthefollowingexperience: High School Diploma or GED required.Apprenticeship or a diploma for an accredited repair school is requiredMust be able to read, write, speak, and comprehend English.Must be able to use standard repair shop tooling and equipment2 years of relevant work experience, working on musical instruments on a daily basisSkilled understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient manner PreferredRequirements: 4 years of relevant work experience, working on musical instruments on a daily basisAdvanced understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient mannerSpecial Attributes:Goal orientedThe ability to produce quality repairs in an efficient mannerThe ability to take advice and supervision from the shop managerProblem solving and technical skills as related to diagnosing and repairing each instrumentThe ability to self-motivate and work independentlyMust be able to work with others in a close environment Lovethisgigandwanttoapply Send your resume and cover letter today along with salary expectations!Why Us Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Music & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Responsibilities:• Under limited supervision, provides technical support for validation and maintenance of production equipment, utilities and systems• Monitors quality and system standards to ensure reliability and compliance with company standards and governmental regulatory requirements• Verifies calibration, maintenance and repair of the instruments• Assists with documentation for validation procedures and technical reports related to systems, products and/or processesQualifications:• High School Diploma or equivalent vocational or technical training• 1-2 years' relevant experience• Pharmaceutical/biotech industry experience preferredDifferent qualifications or responsibilities may apply based on local legal and/or educational requirements. Refer to local job documentation where applicable.Our BenefitsCSL offers the following benefits for this full-time position: Options for health care benefits, including choices of plans for medical, dental, and vision, prescription drug coverage; Company-provided basic life insurance and Short- and Long-Term Disability; the option to participate in CSL’s 401(k) Savings Program; Paid Time Off (PTO) for use in connection with vacations, illness, and other personal business; and paid observed holidays as designated by the Company. For more information on CSL Plasma benefits visit https://cslbenefits.com/cslp.About CSLPlasmaCSL Plasma is one of the world's largest collectors of human plasma. Our work helps to ensure that people with rare and serious diseases are able to live normal, healthy lives. We are committed to our work because lives depend on us. Learn more about CSL Plasma.We want CSL to reflect the world around usAs a global organization with employees in 35+ countries, CSL embraces diversity and inclusion. Learn more about Diversity & Inclusion at CSL.Do work that matters at CSL Plasma!

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – ArdenDiscount Tire54 Airport RdArden, NC 28704OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr6

***** This posting is part of our ongoing effort to identify qualified candidates for future opportunities. While we may not be hiring immediately, we encourage you to submit your application for consideration when a position becomes available. *****Welcome to Mobile Auto Solutions (MAS)!MAS is seeking skilledAutomotive ADAS Technicians to join our growing team! Our technicians are the face of the company. This role comprises customer interaction, vehicle testing and repair, invoice generation, inventory control and service vehicle maintenance. Don’t miss out on an opportunity to grow with us!Salary: $60,000 - $95,000 a year, Depending on experience.Schedule: Full-Time Monday to Friday 8-5 pmWhy choose to work at MAS Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance effective your first day401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysPet insuranceContinuing Education OpportunitiesOpportunities for advancementResponsibilities include but are not limited to:Determines testing and analysis by communicating with shop representatives and reviews all estimates for repairPerforms diagnostic testing, programming, ADAS calibrations and analysisPerforms wiring repairsAdvises shop of needed repairsKeeps inventory of stock, communicating with support staff for needed orders and verifying order receiptsWrites, prints and emails service invoicesCollects signature or payment for work performedDelivers completed invoices and payments to office in orderly manorKeeps shop equipment operating by following operating instructions, troubleshoots breakdowns; maintains supplies; performs preventative maintenance; advises management of repairs; keeps Google Drive up to dateCollaborates with teammates according to PPT guidelines to schedule/complete jobsOther duties as assignedQualifications include but are not limited to:Knowledge of OE scan toolsAbility to learn new tools as neededKnowledge of wiring repair proceduresAbility to service A/C systemsPossesses diagnostic skills in the automotive tradeBasic computer knowledge including using email, spreadsheet and messaging systemsWilling and able to update job knowledge by participating in educational opportunities, reading technical publications and the likeMust possess high school degree or GED equivalent4-10 years related service technician experience requiredMAS is proud to be an equal-opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.The physical demands of your job must be met to perform the job's essential functions successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $95,000 / Yearly

Build your best future with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future!Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive base salary and a comprehensive bonus program.Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year.Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyProviding Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot)Check us out! A Day in the Life at JCIYou Owe It to Yourself to Experience why JCI keeps being voted the Best Place to Work!

Who We Are Invitation Homes is a team of more than 1,400 associates who come from all walks of life. We call different communities “home," but our shared values bind us together. Invitation Homes is a place where possibility lives.The market teams include our Leasing, Property Management and Rehab, Turns & Maintenance professionals. Together, our dedicated associates work hard to build excellent resident experiences while maintaining high-quality homes and ensuring potential residents are presented with a rental property they can’t refuse.Your Role on the Team As a Maintenance Technician at Invitation Homes, you will be performing high-quality maintenance work in our single-family rental homes while providing outstanding customer service to our residents. This includes but is not limited to the following tasks:Completing maintenance service requests across multiple tradesProviding excellent customer service and promoting a quality living experience for all residentsCompleting regular ProCare visits in residents’ homes to perform proactive maintenance and repairsEducating residents regarding all maintenance topicsCompleting general property condition assessments at all property visits and alerting the property management team when items require immediate attentionReviewing and using Technician-specific reports to find opportunities for improvementPerforming repairs in vacant properties while they are on-the-market or during the turn processProperly using and caring for company-supplied tools, materials, and vehiclesPerforming other duties as assignedYour Experience Includes High School diploma or equivalentOSHA 10 is required (new hires will have up to 90 days to complete OSHA 10 certification if not already certified).Proven experience in residential repairs and maintenance, other building maintenance or related experience.Understanding of residential construction and mechanical systems and ability to perform general repairs in some of the following: plumbing, electrical, carpentry, sheetrock, exterior structural, HVAC (minor) and appliances. Some training will be provided.Excellent customer service and interpersonal skills as well as strong verbal and written communication skills; multi-lingual a plusComfortability using mobile devices (i.e. iPad and/or iPhone) and various mobile applicationsMust possess a current driver's license, automobile insurance, and any other licenses and/or certification as required by state lawThe following certifications are preferred but not required:EPA Certification, Type I and IIHVAC CertificationCPO certification (pool)Ability to be at work on a regular and consistent basis including weekends and holidays as neededAbility to provide basic hand and power toolsAbility to perform work that requires the following:Frequent climbing, reaching, use of fingers, stooping, kneeling, crawling, pushing, pulling, lifting, talking, and hearingAbility to lift and/or move an excess of 50 pounds or more and operate standard maintenance equipment as assignedWhy Us We stand for flexibility, opportunity, and a home that people can make their own. It’s as true for our associates as it is for our residents. Just like we help our residents live freer, we liberate our associates’ careers, too. Our associates know that goals matter, potential is unlocked, and careers thrive. Invitation Homes isn’t just a workplace but a possibility place. We offer each new associate:Competitive pay and an annual bonus program for all associatesGenerous paid time off plans including vacation accrual, sick time, volunteer time, and standard and floating holidays401k with matching company contributionsAwesome work environment with casual dressTeam events and gatheringsEmployee resource groups: Together with Women, Asian Alliance, Black Collective, Juntos, Gen Next, and Open Invitation.Build a foundation here and apply today!Salary Range$19.11 - $33.13Compensation and BenefitsTo attract and retain top talent, we're pleased to offer competitive compensation and benefits, including:Annual bonus programHealth, dental, vision, and life insuranceLong-term and short-term disability insuranceGenerous paid time off plans include vacation accrual, sick time, standard holidays and floating holidays401(k) with company matching contributionsAwesome work environment with casual dressTeam events and gatherings (Pre- and Post-Covid)Invitation Homes is an equal opportunity employer committed to fostering a diverse, inclusive and innovative environment with the best associates. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other factor protected by applicable federal, state or local law. If you have a disability or special need that requires accommodation, please contact us at .To all recruitment agencies: Invitation Homes does not accept agency resumes. Please do not forward resumes to Invitation Homes employees. Invitation Homes is not responsible for any fees related to unsolicited resumes. #LI-CN1

What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill a Maintenance Technician need at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require nights and weekend flexibility. What we’ll expect from you: Must have a Valid drivers’ license, good driving record, personal vehicle and auto insurance.Live within a 30-minute commute of the property;Stellar Communication and Customer Service skills.One or more years experience in allfacets of apartment maintenance including plumbing, electrical, HVAC, carpentry, and small appliance repair.High school diploma or general education degree (GED).Be able to pass a criminal background check and drug screen.HVAC/EPA/CFC Certification and/or Boiler’s License a plus. Please note that only candidates who meet the specified requirements will be contacted for an interview. Thank you for your interest in joining our team as a Maintenance Technician. The Benefits of Employment: 50% Rent Discount at the community you workProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (as much as $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLongand short term disabilityRetirement Plan - 401(k) Plan with company matchFree access to pool and fitness centerGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. #AC6408Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

DescriptionELECTRICIANThis role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls.What you will do:Perform routine electrical/electronic preventative maintenance on mill equipment.Responsible for the repair, modification, and maintenance of a variety of electrical and electronic equipmentPerform tasks like wiring circuits, replacing components, and repairing electronic devices.Performs test reading using several different instruments, including multi-meter and Megger.Remain current in technical changes or equipment designs by attending classes as needed.Work rotating shifts, which includes nights, holidays, weekends, and overtime as scheduled or required.Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training.Other duties as assigned.What you will need:High School Diploma or GEDBasic reading, writing, and arithmetic skillsBackground in Electrical fundamentalsMust have knowledge in 3 phase and single-phase power distribution systems, motor controls, wiring, and troubleshooting of such systems.Experience with 480-volt power and logic circuitsStrong computer, math, analytical, and planning skillsMust be able to understand and follow electrical schematics proficiently without supervisionMust be samiliar with machine control systemsAbility to troubleshoot (complex) machine control systems.Ability to identify the features and functions of controllers.Ability to describe and compare pneumatic and electronic controllers.Ability to identify the signal path through a control circuit.A combination of higher education and experience will be taken into consideration.Eligible to legally work in the United States without employer sponsorship.Willing and able to work a schedule which will include nights, weekends, and holidays.Willing and able to work on an emergency call-in basis when required.Ability to work as part of a team and deliver value to the team.Willingness and ability to cross-train to learn new jobs and skills.Consistent, predictable attendanceWhat will make you stand out:VFD drives experiencePLC ExperienceAble to interpret PLC logic as it relates to its application to process and equipment for troubleshooting purposes Our highly competitive compensation package and outstanding benefits include:Benefits starting Day 1Competitive starting payOn-the-job training andA culture that strongly believes in promoting from withinMedicalDentalVision401k with company matchLife InsuranceDisability InsurancePaid vacations and holidaysSafety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities.Apply:If you are ready to build your career in a company that thrives on growth, internal promotions, training, safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: www.westfraser.com/jobsWe thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please.West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company.West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $150,000 /yr.

Overview: Tire Technician – Part-Time – South BlvdDiscount Tire9440 South BlvdCharlotte, NC 28273OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $14Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Annual Paid Time Off (PTO) plans2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week6 paid holidays annuallyMedical, Prescription Drug, Dental & Vision Insurance effective Day 1401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsuranceAdditional Voluntary Life InsuranceContinuing Education OpportunitiesFree Prescription or Non-Prescription Safety Glasses annuallyAnnual Voluntary Uniform StipendGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.Compensation Details:$80,000 - $150,000 /yr.

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.