We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Req ID:448491Address: 1805 Easley Hwy Piedmont, SC, 29673Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Job Description: A&P Base Mechanic - Rotor WingIMMEDIATELY HIRING! A&P MECHANIC - ROTOR WINGFULL-TIME Opportunityin South Carolina$62,705 to $91,455 (starting pay) Depending on experience*$10000 sign-on AND $2080 annual stipend available with IA!!*We are hiring forA&PBaseMechanicsto support the daily maintenance of thehelicoptersacross our region. You will perform scheduled and unscheduled aircraft maintenance, inspections, repairs, and modifications to airframes, rotors and appliances. Our Aircraft Maintenance team maintains our helicopters to the highest standards possible.This is a base position, relocation within an hour required.ESSENTIAL FUNCTIONS/DUTIESProvide on-site maintenance support for our fleet ofBell 407 series helicoptersMaintain the aircraftSchedule aircraft maintenanceManage base inventoryMaintain the base library and company owned ground support equipmentPerform other duties as assignedMINIMUM QUALIFICATIONSThree years of turbine helicopter maintenance experience withA minimum of six monthshelicopter maintenance experienceduring that last 24 monthsBell 407 maintenance experience preferredHigh School diploma or GED equivalentValid FAA Airframe & Powerplant (A&P) License requiredInspection Authorization Certification preferredValid State issued Driver's LicenseAdditional FAA/FCC ratings preferredMust be able to successfully complete FAA - DOT drug and alcohol testing programMust be able to push and/or pull 100+ lbs.Must be able to lift and/or carry up to 50 lbs.Intermediate-level computer skills with an inventory systemIFR helicopter avionics and auto-pilot experience preferredManufacturer training or equivalent onBell 407preferredPrior civilian HEMS experience preferredTravel between bases to support aircraft maintenance needs is requiredGUIDING VALUES AND BEHAVIORSEmployee must consistently exhibit our guiding principles:• Patient Care - We continually earn the privilege to care for our patients. It is at the forefront of everything we do.• One Team - We respect each other and achieve together what no individual can alone.• Innovation - We are driven to develop solutions that inspire progress.• Vigilance - We will never waver in our commitment to safety and preparedness in the fulfillment of our duties.• Ownership - We are accountable for what we do and take pride in how we do it.• Citizenship - We are dedicated to being good stewards in the communities we serve.Why Choose Med-Trans:As a national leader in air ambulance, Med-Trans is one of Global Medical Response’s (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at www.AtaMomentsNotice.com. Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. #GMR_AIRIf your passion is helicopters and you’re ready to workin an environment where every second counts, apply today! EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability.

Plant-Electrician is a “working electrician” that is expected to perform skilled journey-level work in construction, maintenance, and repair of electrical and electronic equipment, apparatus, and fixtures plant where heavy manufacturing equipment is used in the production of OSB Lumber. The position requires strong troubleshooting skills to diagnose and correct electrical problems of heavy manufacturing equipment, utilizing hydraulics, pneumatics, and automated equipment utilizing voltage from 5Vdc to 4160V ac 3 phase, VFD, DC Servos, and PLCs. What you will do: May be responsible to perform a combination of the following duties based upon job assignment: Inspect, maintain, repair, and overhaul electro-mechanical and solid-state electrical equipment using a variety of electrical test equipment, meters, and powered and non-powered tools.Provide preventive and predictive maintenance of the electrical systems; conduct daily rounds and readings.Install new electrical and electronic equipment and electrical wiring according to the National Electrical Code and company electrical standards.Maintain and repair electrical and electronic systems used in the facility, including its associated equipment, Powerflex variable frequency drives (VFD), drives, and controls.Perform high voltage switching and operate generators in support of operations.Responsible for station Lockout/Tagout procedures as mandated by company policy.Work safely and cooperatively with co-workers, supervisors, and outside contractors.Lead a work party in performing maintenance or repair work.Comply with and practice proper equipment clearance procedures.Perform all work in compliance with applicable codes, standards, safety, and environmental regulations.Perform other duties as assigned.Treat all with dignity, respect, and courtesy. General Qualifications - Skills/Competencies/Knowledge: Methods, equipment, and materials used in the electrical trade.Health, safety, and environmental laws and regulations.Strong understanding of applicable electrical and other maintenance-related laws, codes, regulations, policies, and procedures.Principles of electronic theory as applied to electrical and electronic circuits, wiring, and electrical equipment used in power generation.Ability to read electrical schematics, blueprints, shop drawings, electrical prints, wiring diagrams, and nameplates.Knowledge of single-phase and three-phase AC circuits.Ability to use ladders, scaffolding, and/or a scissor lift while performing job duties.Ability to work with power tools, small-motorized equipment, and other service vehicles.Work independently with little direction.Team player and highly self-motivated individual.Ability to work overtime, weekends, holidays, and on-call to meet the facility’s need for any emergency repairs, as well as for routine preventive maintenance during off-peak production periods.Good communication skills and ability to follow oral and written instructions. Theory of operation and use of Programmable Logic Control (PLC) units and other computer-based equipment.Install, program, and troubleshoot Allen Bradley and Siemens PLC-based equipment. Analyze situations accurately and adopt an effective course of action. Degrees / Certificates / License Experience required: 3+ years of demonstrated relevant industrial plant or outside contractor experience performing a wide variety of maintenance and operational tasks servicing comparable heavy industrial equipmentStrong troubleshooting skills to diagnose and correct electrical problems of heavy manufacturing machinery.Ability to inspect, maintain, repair, and overhaul electromechanical and solid-state electrical equipment using a variety of electrical test equipment, meters, powered and non-powered tools, and equipment.High School diploma or GED equivalent.AA Degree preferred Working Hours Will be required to work a 2-2-3 rotating shift schedule after the initial training period. This is a 12.25 hour shift 6:45 a – 7p or 6:45p to 7a that rotated between nights and days every 2 weeks. Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1Competitive starting payOn-the-job training andA culture that strongly believes in promoting from withinMedicalDentalVision 401k with company matchLife InsuranceDisability InsurancePaid vacations and holidaysSafety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, internal promotions, training, safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: www.westfraser.com/jobs We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace EducationRequiredGED or betterHigh School or better

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $150,000 /yr.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Plant-Electrician is a “working electrician” that is expected to perform skilled journey-level work in construction, maintenance, and repair of electrical and electronic equipment, apparatus, and fixtures plant where heavy manufacturing equipment is used in the production of OSB Lumber. The position requires strong troubleshooting skills to diagnose and correct electrical problems of heavy manufacturing equipment, utilizing hydraulics, pneumatics, and automated equipment utilizing voltage from 5Vdc to 4160V ac 3 phase, VFD, DC Servos, and PLCs. What you will do: May be responsible to perform a combination of the following duties based upon job assignment: Inspect, maintain, repair, and overhaul electro-mechanical and solid-state electrical equipment using a variety of electrical test equipment, meters, and powered and non-powered tools.Provide preventive and predictive maintenance of the electrical systems; conduct daily rounds and readings.Install new electrical and electronic equipment and electrical wiring according to the National Electrical Code and company electrical standards.Maintain and repair electrical and electronic systems used in the facility, including its associated equipment, Powerflex variable frequency drives (VFD), drives, and controls.Perform high voltage switching and operate generators in support of operations.Responsible for station Lockout/Tagout procedures as mandated by company policy.Work safely and cooperatively with co-workers, supervisors, and outside contractors.Lead a work party in performing maintenance or repair work.Comply with and practice proper equipment clearance procedures.Perform all work in compliance with applicable codes, standards, safety, and environmental regulations.Perform other duties as assigned.Treat all with dignity, respect, and courtesy. General Qualifications - Skills/Competencies/Knowledge: Methods, equipment, and materials used in the electrical trade.Health, safety, and environmental laws and regulations.Strong understanding of applicable electrical and other maintenance-related laws, codes, regulations, policies, and procedures.Principles of electronic theory as applied to electrical and electronic circuits, wiring, and electrical equipment used in power generation.Ability to read electrical schematics, blueprints, shop drawings, electrical prints, wiring diagrams, and nameplates.Knowledge of single-phase and three-phase AC circuits.Ability to use ladders, scaffolding, and/or a scissor lift while performing job duties.Ability to work with power tools, small-motorized equipment, and other service vehicles.Work independently with little direction.Team player and highly self-motivated individual.Ability to work overtime, weekends, holidays, and on-call to meet the facility’s need for any emergency repairs, as well as for routine preventive maintenance during off-peak production periods.Good communication skills and ability to follow oral and written instructions. Theory of operation and use of Programmable Logic Control (PLC) units and other computer-based equipment.Install, program, and troubleshoot Allen Bradley and Siemens PLC-based equipment. Analyze situations accurately and adopt an effective course of action. Degrees / Certificates / License Experience required: 3+ years of demonstrated relevant industrial plant or outside contractor experience performing a wide variety of maintenance and operational tasks servicing comparable heavy industrial equipmentStrong troubleshooting skills to diagnose and correct electrical problems of heavy manufacturing machinery.Ability to inspect, maintain, repair, and overhaul electromechanical and solid-state electrical equipment using a variety of electrical test equipment, meters, powered and non-powered tools, and equipment.High School diploma or GED equivalent.AA Degree preferred Working Hours Will be required to work a 2-2-3 rotating shift schedule after the initial training period. This is a 12.25 hour shift 6:45 a – 7p or 6:45p to 7a that rotated between nights and days every 2 weeks. Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1Competitive starting payOn-the-job training andA culture that strongly believes in promoting from withinMedicalDentalVision 401k with company matchLife InsuranceDisability InsurancePaid vacations and holidaysSafety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, internal promotions, training, safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: www.westfraser.com/jobs We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace EducationPreferredTrades or betterHigh School or better

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment