Avionics Technician Seniorin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221090Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanic Team Lead-A&P (4th Shift-Weekend Days)in GAC SavannahUnique Skills:Availabilty to work 4th Shift (Weekend Days)Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221232Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Certification Inspector A&Pin GAC SavannahUnique Skills:Airframe and Powerplant license required.Education and Experience RequirementsHigh School Diploma or GED required. 7 years aircraft inspection experience to include 3 years inspection experience on large or mid-size aircraft (or same type and complexity as GAC aircraft). A&P (FAA Airframe and Powerplant) license required. ASQ certificate (American Society for Quality) preferred. Other Inspection Authorization (IA) preferred. Other DAR/DMIR/ODAR/ODA-Unit Member in good-standing preferred. Position Purpose:Performs airworthiness and certification inspections in a timely manner to ensure aircraft and/or component airworthiness. Physically inspects aircraft, components, and reviews related documentation to ensure workmanship meets acceptable standards of quality and customer aircraft/components are returned to service in an airworthy condition with all required. documentation properly completed and filed. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as a part of Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/ODA requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs inspection and airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, and other related documents. Conducts first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensures all associated records are completed . Performs inspections and certifies acft/component as airworthy prior to delivery and Return to Service . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Ensures aircraft/components are airworthy prior to any flight activities . Issuance of FAA 8130-3 Forms in accordance with FAA/ODA requirements for authorized functions and activities to include conformity, prototype, export, and 14 CFR Part 43 Return to Service activities . Performs certification inspections to type design requirements in support of acft/component certification . Monitors repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and QC Manuals . Develops and approves acft log book entries relating to acft configuration and installations . Performs FAA acft/component certification activities as an IAR . Manages Product/Article certification activities . Provides technical support to inspection personnel supporting FAA and/or ODA documented requirements . Supports coordination of inspection workloads .Perform other duties as assigned.Other Requirements: Competent in use of all job related tools and equipment. Proficient in blueprint/drawing reading, use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications and other manufacturing/inspection related documentation. Must possess working knowledge and application of Quality Assurance or Quality Control systems and methodologies. Must possess a verifiable working knowledge of FAA Regulations, Orders, and other guidance pertinent to issuance of export airworthiness approvals & conformity determination as defined in FAA Order 8100.8D Appendix A (as revised) and 8100.15 (as revised). Able to complete FAA/ODA initial/recurrent designee training within established timeframe to include obtaining a passing certificate as part of IAR application process. Must be capable of obtaining IAR designee appointment within established timeframe depending on Airworthiness and Conformity function code(s) required. for position. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221042Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Installer II - Retrofitin GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Knowledge of applicable regulatory requirements and customer specifications. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose:Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Maintains required. logs and records. . Completes tasks within allotted time frame. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Checks all work and ensures a defective free assembly prior to final inspection. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . Maintains a neat and orderly work area.Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) .Perform other duties as assigned.Other Requirements: Strong written and verbal skills required. Computer skills and general software knowledge necessary. Additional InformationRequisition Number: 219265Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 05/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

CNC Technician IIin GAC SavannahUnique Skills:*** 2nd shift ***Past CNC experience required.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related experience or education to include one (1) year experience with similar automated equipment. Position Purpose:Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Operate automated machine using existing programs. Test program and ensure machine is set up in accordance with drawings. Remove and/or replace cutting tools and offsets as required. Inspect condition of tools and replace as needed. Manipulate programs to fit inserts into material, ensuring fit and conformity. Inspect cut material/part prior to CNC operation to ensure conformity and compliance with blueprints, models, and/or engineering documents. Identify material and appropriate cutting tools. Set up material and inspect for serviceability.Additional Functions: Monitor material supply. . Validate preventative maintenance and minor repairs on machines. . Complete paperwork and other documents as required. . Maintain a clean and safe work environment . Comply with 5S and Environmental, Health and Safety requirements. .Perform other duties as assigned.Additional InformationRequisition Number: 222033Category: OperationsPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/28/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Interior Installation Tech IIin GAC SavannahUnique Skills:Let your career take flightOur aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.This individualwill be joining our 1st shift Interior Installation Team within our Completions Department.Knowledge of and proper usage methodsformosthand tools, table saw, compound miter saw, planer, jointer, bandsaw, router, and cordlesspower tools preferred. Mechanical background, mechanic (automotive, small engine, powersports, diesel), welding, woodworking, cabinet building, and/or finish carpentry experience is preferred but not required. Must possess a strong willingness to learn and work within a team environment.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of application installation, fabrication or related experience. preferred. Experience in aerospace industry. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Additional InformationRequisition Number: 223801Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/05/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Installation Tech Iin GAC SavannahUnique Skills:Let your career take flightOur aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.This individualwill be joining our 1st shift Interior Installation Team within our Completions Department.Knowledge of and proper usage methodsformosthand tools, table saw, compound miter saw, planer, jointer, bandsaw, router, and cordlesspower tools preferred. Mechanical background, mechanic (automotive, small engine, powersports, diesel), welding, woodworking, cabinet building, and/or finish carpentry experience is preferred but not required. Must possess a strong willingness to learn and work within a team environment.Education and Experience RequirementsHigh School Diploma or GED required. Other Application installation, fabrication or related experience or trade school preferred. Position Purpose:The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications. Use the material tracking system to create parts demand, track squawks and to sign off paperwork. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to work any shift. Able to climb ladders and stairs, work in small restricted areas, and lift up to 40 pounds. Must be computer literate. Additional InformationRequisition Number: 223800Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/05/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician IIin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 222289Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

CNC Technician Iin GAC SavannahUnique Skills:Mechanical experienceAble to left 50 poundsEducation and Experience RequirementsHigh School Diploma or GED required. Entry level position. Experience in automated machine environment/CNC preferred.. Position Purpose:Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Under supervision, operate automated machine using existing programs. Remove/replace cutting tools and offsets as required. Inspect condition of tools and replace as needed. Inspect cut material/part prior to CNC operation to ensure conformity and compliance with blueprints, models, and/or engineering documents. Identify material and appropriate cutting tools. Set up material and inspect for serviceability.Additional Functions: Monitor material supply. . Validate preventative maintenance and minor repairs on machines. Alert maintenance of any repair/preventative issues. . Maintain a clean and safe work environment . Comply with 5S and Environmental, Health and Safety requirements. .Perform other duties as assigned.Additional InformationRequisition Number: 222894Category: OperationsPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JP1

Avionics/Electrical Technician 2in GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 223865Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/09/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Avionics/Electrical Technician 1in GAC SavannahUnique Skills:Ability to work first or second shifts and overtime.Education and Experience RequirementsHigh School Diploma or GED required. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 223866Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/09/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician 2in GAC SavannahUnique Skills:Must be able to work 2nd shift.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223863Category: Service CenterPercentage of Travel: NoneShift: SecondEmployment Type: Full-timePosting End Date: 12/09/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JH1

Structural Mechanic IIIin GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule . Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.Additional Functions: Participate in continuous improvement activities . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .Perform other duties as assigned.Other Requirements: Basic computer and basic shop math skills. Read and comprehend basic documents and instructions and read a scale. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs. Additional InformationRequisition Number: 223867Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/09/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Structural Mechanic Iin GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred.. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Position Purpose:In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet FAA requirements, customer specifications, and Gulfstream standard of quality . Rivet structural assemblies and parts, including sheetmetal parts, using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets) . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Use resource planning system to enter daily labor against correct Work Order and Item numbers . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Maintain a neat and orderly work area, supports the company 5S Program and complies with all safety regulations . Work under moderate supervision on duties and tasks . Support Lean Activities .Additional Functions: Additional Functions . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Keep shop and aircraft work areas clean and uncluttered . Properly care for and maintain shop equipment and tools as assigned by Supervisor . Comply with safety rules and procedures .Perform other duties as assigned.Other Requirements: Basic knowledge of various aircraft structures, sheetmetal, and fabrication processes. Ability to read and interpret basic blueprints. Read and interpret 6" scale. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand English language. Additional InformationRequisition Number: 223855Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/09/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Structural Mechanic 4in GAC SavannahUnique Skills:Fuselage Major Assembly experience requiredEducation and Experience RequirementsHigh School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies .Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223748Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Quality Control Inspector Srin GAC SavannahUnique Skills:Both Wing and Fuselage experience is preferred for this particular position within department. Must be proficeint in training new hire QC members. Proficient in both CATIA/Solumina systems. Ideal candidate is flexible and able to work between different buildings and departments as needed with little supervision required to successfully complete projects/tasks. Education and Experience RequirementsHigh School Diploma or GED required. 5 years quality inspection related experience required. 7 years manufacturing experience or equivalent aerospace experience preferred. A&P (FAA Airframe and Powerplant) license preferred. Position Purpose:In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform inspection duties utilizing engineering drawings and orders, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Perform transfer and consolidated inspections. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level.Additional Functions: May perform functions of Return to Service and Flight Release PQLs. . May develop and coordinate training. Instruct others in techniques of inspection and other related duties. . May perform inspection audits and document and present findings/trends. . Coordinate inspection workload for multiple inspectors and multiple manufacturing departments according to priorities, efficiency and cost effectiveness. . Provide technical support to manufacturing, engineering, materials and IPT personnel. . Lead projects, champion continuous improvement. . Perform duties of MRB signature authority. . Perform area inspections to ensure compliance with applicable standards and specifications. .Perform other duties as assigned.Other Requirements: Thorough knowledge of GAC CATIA or blueprint reading and interpretation, GAC work instructions, technical specifications and GAC QA Manual. Highly proficient in the use of all job related tools and equipment. #LI-JO1Additional InformationRequisition Number: 223752Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Quality Control Inspector Iin GAC SavannahUnique Skills:Must be willing to work other shifts as needed.Education and Experience RequirementsHigh School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required. Position Purpose:In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level.Additional Functions: Provide technical support to manufacturing personnel. . Perform area inspections to ensure compliance with applicable standards and specifications. . Participate in continuous improvement activities. .Perform other duties as assigned.Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment. #LI-JO1Additional InformationRequisition Number: 223602Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Upholstery TechnicianinGAC SavannahUnique Skills:Experience with SmarTeam, CATIA, and/or CDM highly desired. Willingness to teach others and work well within a team. Verifiable experience in covering panels with attention to detail.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades. Experience in aerospace industry preferred.. Position Purpose:Under minimal supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate, using design/engineering drawings and aircraft specifications, cover and install flat panels and curtains. May sew simple covers using design/engineering drawings and aircraft specifications. Work with fabric, vinyl and leather hides, composites and other materials using specified adhesives, sewing equipment, hardware, hand tools and various power tools. Cut and surge carpets, cover bulkheads and cover/install panels. May be responsible to fabricate various metal parts, fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, and windows. . Use the material tracking system to create parts demand, track squawks and to sign-off work.Additional Functions: 1. Work with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Manufacturing and other process improvement techniques. . 2. Use the material tracking system, Corridor, to create parts demands, track squawks and to sign-off work. . 3. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. . 4. Address unsafe conditions before putting others as risk. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Additional InformationRequisition Number: 223690Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 11/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Avionics/Electrical Technician Iin GAC SavannahUnique Skills:Able to have a positive attitude and well in supporting other teams and aircraftEducation and Experience RequirementsHigh School Diploma or GED required. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 222024Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/21/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft