RoadSafe is looking for a Flagger to join our team!
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Pass a drug test Must be able to speak and read English. Driver’s license required Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Mechanic Team Leadin GAC SavannahUnique Skills:G500 / G600 / G650 experience prefered. This is a 4th shift position.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisithttps://outsidegulfstream.com/benefitsto learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220929Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Oregon- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Req ID:25061Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

***$2K Sign-On Bonus***What this job involves – Operates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What is your day to day Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components.Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.Respond effectively to all emergencies.Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Must be willing and able to support any after hours building related activity as required.Attend periodic training seminars.Other assigned operational tasks as may be typically expected of the Mobile Engineer role.Candidate will be provided tools required to perform assigned work scope.Desired experience and technical skills Required Candidate must possess and maintain a valid state driver’s licenseType II EPA 608 CertificationMinimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance.Must be able to lift up to 80 lbs. and climb up to 30 ft. ladders.Ability to perform on call duties and overtime as required.Preferred Universal EPA 608 CertificationKnowledge of overall MEP/HVAC system design and application.Experience managing work orders, utilizing CMMS technologyExperience working in a service-related role, specific to commercial facilities.#MHVACjobs

Req ID:443462Address: 409 Yemassee Hwy Yemassee, SC, 29945Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Job Description Job Title:Automotive Technician / MechanicLocation: 1475 Folly Road, Charleston, SC 29412Job Overview:This brand-new state-of-the-art facility is scheduled to open in October 2024!We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our customers.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for our customersContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot customer concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate customer concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 285+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:**Paid Drive Time - Enjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.**Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowMedical, Vision & Dental InsurancePaid Vacation401K MatchedUp to 3K Sign-on Bonus Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 3+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Overview: Tire Technician – Part-Time – BeaufortDiscount Tire199 Robert Smalls PkwyBeaufort, SC 29906OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $14Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

$24.00/HourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. North CharlestonSouth CarolinaUnited States of America

Overview: It's an exciting time to join Lowes Foods! In addition to being part of a family-owned and growing company, we offer great pay and excellent benefits including Medical, Dental, and Vision, 401K and Pension Plan, a discount for shopping, paid time off, weekly pay, and more!To provide excellent guest service through accurate pricing of merchandise sold.Pay starts at $15/hour Responsibilities: 1. Verify/audit prices in DSD categories, MDI categories, Perishable departments and ad items.2. Update new prices in register system.3. Update new prices on shelf tags and signs.4. Update prices in the computer and on the shelf including displaying signs for discontinued items.5. Audit scan error logs.6. Ensure that all DSD price changes transmitted to the store are properly executed and shelf tags are printed and placed on the shelf (includes advertised and promotional items).7. Perform as a stocker.8. Perform as a cashier.9. Perform all other duties as assigned by management. Qualifications: 1. Friendly, outgoing personality.2. Ability to work well with others.3. Ability to lift 25 lbs. occasionally and 15 lbs. constantly.4. Ability to read and understand information and direction.5. Knowledge of DSD/Scanning operations.6. Ability to work well with computers.7. Demonstrated ability and willingness to learn multiple tasks and technical requirements of the job.8. Effective communication and guest service skills.9. Demonstrate excellent math skills.10. Ability to bend, kneel, and stand for extended periods of time.11. Excellent organizational skills.#boost

Sheetmetal Tech IIin GAC SavannahUnique Skills:Sheet metal fabrication experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). Assist in monthly 5S audits. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). . Properly use and maintain company-provided tools and equipment and returns items to tool room after use. . Ensure standard operating procedures are followed when operating ground support equipment. . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Ensure accurate daily job charging to the aircraft. . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. . Assist in maintaining shop equipment and associated JSAs. .Perform other duties as assigned.Other Requirements: A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with sheetmetal installation and fabrication work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with Microsoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222292Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Illinois- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Req ID:25059Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Our team at TRS-SESCO is hiring!With over 150 years of experience,CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting.CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily.WHAT WE OFFERWe are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow.Pay from $55/HRSign-on bonus up to $25,000.00WHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus plan.Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K) matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-art training facilityto invest in YOUR career growth.Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much more.Pet InsuranceLegal Plan, and ID Theft ProtectionGeneral Statement of DutiesThe responsibility of an HVAC Service Technician is to perform startup, maintenance, and repair operations pertaining to complex, heating, and cooling systems and associated control systems on light/heavy commercial building, including but not limited to, military bases, hospitals, K-12, and higher education buildings. The technician is responsible for maintaining the quality of work at acceptable company standards, and for representing the company to the customer in a manner that conveys effective communication and a positive working relationship. Responsibilities: Distinguishing Features of the ClassPerform journey-level HVAC work in installation, Start-up and repair of a wide variety of systems that may include RTU, chillers, boilers, heat pumps, air handlers, cooling towers, hydronic systems, multi-zone, VFD, VRF, VAV, VSD systems, gas/electric water heaters, steam and water source systems, controls and automation systems as well as refrigeration: DX, CO2, Glycol, Propane, Ammonia.Scope of work also includes, but is not limited to leading a team, assigning work to semiskilled workers, inspecting work of semi-skilled workers, assisting other skilled HVAC mechanics, working in varying weather, work conditions, and working at varying heights.All work is reviewed by Service Manager and Division Management in progress and upon completion for adherence to established maintenance and repair standards.Work is performed in varying weather and working at varying heights requiring the use of ladders and under established and enforced safety conditions.Illustrative examples of WorkTrain semi-skilled workers in procedures and methods, use of tools, recognition of parts and other skills.Repair: pneumatic thermostats, controls, control circuits, evaporators, condensers, air handlers, chillers, pumps, circulation pumps, supply lines, air compressors, steam/other regulating valves and sensors, energy recovery ventilators (ERV’s) and associated gas packSupervise, participate, and inventory parts, supplies, and tools on service truck.Clean cooling towers, replace filters, lubricate equipment, inspect, and replace parts and components.Pick up parts and supplies from vendors keeping accurate receipts and records on every purchase.Operate computerized scheduling and troubleshooting heating and cooling control system.Operate a variety of hand and power tools.Strict adherence to OSHA safety standards at all times.Adherence to attendance policies.Attendance to training sessions on new technology as it becomes available. Qualifications: Work without direct supervision.Deal diplomatically and effectively with customers.Work within standards of accuracy and make decisions based on measurable criteria; and comprehend technical data.Be physically capable of working easily and skillfully with hands, lift and carry objects, see well (either naturally or with correction,) climb and maintain balance on ladders and scaffolds, and stand, stoop, kneel, or crouch.Have knowledge of current OSHA safety regulations.Have the ability to coordinate and perform multiple activities in a timely manner.Have the ability to maintain a sense of urgency, but remain calm, when handling emergencies.Thorough knowledge of the principles and techniques of the HVAC trade.Thorough knowledge of methods, tools, parts, and equipment used in HVAC trade.Thorough knowledge of occupational hazards and safety precautions in work area.Thorough knowledge of diagnostic troubleshooting of HVAC equipment.General knowledge of diagnostic troubleshooting of direct digital controls.Ability to understand and accurately follow oral and written instructions.Ability to read and interpret service manuals and schematics drawings.Ability to maintain accurately routine records.Ability to exercise the physical strength and agility necessary to perform job tasks, with a minimum of 50 lbs. lifting and carrying capacity and occasional 75 lb. lifting capacity.Ability to establish and maintain effective working relationships with co-workers, sales engineers, and customers.Ability to work overtime/out of town travel on short notice, evenings, weekends, and holidays.Desirable Education and ExperienceGraduation from high school or equivalent.At least 10 years large commercial HVAC experience supplemented by course work in a related trade, or an equivalent combination of education and experience required.HVAC Contractors license preferred.Start Up experience good to have but can train.Special RequirementPossession of a valid driver’s license.Ability to pass pre-employment screening.Hold a valid CFC certification - preferably. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: Tire Technician – Part-Time – BeaufortDiscount Tire199 Robert Smalls PkwyBeaufort, SC 29906OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $14Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Avionics Technician Srin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222290Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Louisiana- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Pay Range: ($58,934.00- $109,450.00) Target Bonus: 5.0% Req ID:25060Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Sheetmetal Tech Srin GAC SavannahUnique Skills:Sheet metal fabrication experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred.. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Coordinate with other disciplines concerning projects. . Perform Lead responsibilities, as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222293Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Remote - Georgia- Ladson, SC,United States (US) Employment Status: Hourly Full-Time Function: Customer Experience Req ID:25058Currently seeking a US-based Service Technician with a strong background in mechanical and electrical knowledge paired with troubleshooting skills who will join a Global Service Team located in Scheifling, Austria. The Service Technician will have industrial-related education with strong communication and customer service skills, capable of delivering and maintaining high customer satisfaction while building strong personal relationships. ESSENTIAL FUNCTIONSPerform comprehensive service tasks on our groundbreaking robotic assembly and welding systems installed in North America, i.e. robot calibrations, software updates, general troubleshooting, etc.Educate customers on the most efficient usage of the equipment by giving clear operational guidanceDiagnose customer problems and identify immediate fixes in case of machine shutdowns Partner with clients to propose longer term improvements and liaise it with the Engineering team based in Austria Install aftermarket parts/products sold as upgrades or retrofits to existing clientsIdentify spare parts demand and leverage it through the back-office team Provide service reports with value propositions and recommendations for customersBuild and maintain stable relationships with customers at both managerial and operator levels to shape the image of Zeman as a premium equipment and automation solution providerWillingness to travel domestically and internationally 75% of the yearPerform general duties as assigned and assist in other areas as workload requiresREQUIRED SKILLSHigh School Diploma/GED or equivalent experience3+ years’ experience in installation/servicing of high value industrial machineryStrong software, electrical, and mechanical skillset; knowledge of robotic welding equipment Ability to work flexible hours around a changing scheduleExcellent communication, organizational, interpersonal, and diagnostic skillsAbility to work independently without much supervisionCommitment to travel 75% of the year throughout North America (US, Canada, Mexico)Good communication skills and strong service mindset when dealing with customersFluent English--both written and verbal Current and valid US driver's license with a clean driving record and reliable transportationPREFERRED SKILLSTechnical Certifications in an engineering field, ideally in Electrical/Mechanical Engineering, Mechatronics or equivalent Fluent in Spanish, French, or any other languageWORK ENVIRONMENTWhile performing the duties of this job, the employee is frequently exposed to moving mechanical parts and vibration, airborne particles, and machine lubricants and chemicals used in cleaning processes. The noise level in the work environment is usually moderate.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand/walk on cement floors; use hands to finger, handle, or grasp; and reach with hands and arms. The position requires occasional lifting, pushing and pulling objects that weigh up to 60 pounds. The employee is frequently required to grip and operate hand tools with a minimum of 50 in/lbs of force. The employee is frequently required to see fine components and possess manual dexterity to properly place and solder these components.EEO STATEMENTLincoln Electric promotes equal employment opportunities and will not discriminate, nor tolerate discrimination, against any applicant or employee because of age; race; color; religion; sex; sexual orientation; gender identity; national origin; citizenship status; disability; veteran status;genetic information; or on the basis of pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation.OTHER DUTIESPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

NDT Technician IIin GAC SavannahUnique Skills:Fly With UsOur aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.About the GroupAbout Our Group and The Role The NDT (Non-Destructive Testing) team is part of our Enterprise Quality organization that focuses on ensuring part integrity and compliance to engineering type design by utilizing non- destructive methods (UT, ET, MT, PT, and RT) to test our aircrafts and parts during production. In addition to the NDT Methods, technicians utilize, Solumina, SAP, and Microsoft Suite. Our Techs work with many cross functional teams and suppliers, strong communication skills are required. Our NDT Engineer Specialist will also be writing Quality Test Reports (QTR's), reading blue prints and Catia drawings. Technicians in NDT work different schedules, flexibility to work different schedules is necessary.About the RoleRequired QualificationsCertified in one NAS 410 NDT method requiredPreferred QualificationsNDT certification in Ultrasonics (UT) and/orEddy Current (ET)Ability to read blueprints and Catia drawingsMicrosoft Office programs, to include Excel, Power Point, and AccessSoluminaSAPAutomated NDT Testing Equipment (Squirter/TTU; Immersion)OtherIf selected to go through the hiring process, the applicant will need to provideNDT supervised OJT logbook with signatures and NDT formal training certifications as part of qualifying for the role. As a production team member, Technicians work varied shifts, unscheduled overtime (if needed and approved). Any other certification exams will need to be completed within a reasonable period of time (typically within one month of start date)Education and Experience RequirementsHigh School Diploma or GED required. 2 years of NDT related experience required.. Certified in one NAS 410 NDT method required. and must be able to be certified in a second method within 1 year. Other Certification in more than 1 NAS 410 NDT method preferred. ASQ certificate (American Society for Quality) preferred. Position Purpose:In a team-oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies and installations are built to type design data.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures . Records, organizes and evaluates test results and enter results into applicable documents . Ensure compliance to all radiation safety rules and regulations and provides protection to self and others during testing . Maintains equipment and assures calibration for tests to be performed . Maintains inventory control of area equipment .Additional Functions: Works with and assists other NDT Technicians as required. . Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness . Provides technical assistance to subordinate level NDT technicians . Performs process control on area inspection equipment . Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms . Performs automated ultrasonic C-scan inspection of composite parts . Must be available to work any shift .Perform other duties as assigned.Other Requirements: Must provide formal NDT training records. NDT experience on determining product acceptability preferred. Experience in blueprint reading and interpretation. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal and communication skills. Must demonstrate good housekeeping and safety practices. Proficiency in current computer-based software. Must be able to lift and transport objects up to 40 pounds. #LI-KP2Additional InformationRequisition Number: 222129Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Upholsterer - Flammability Tech 1in GAC SavannahUnique Skills:Strong sewing/upholstery skill required. Experince in sewing & constructing Flammability oil-burn test cushions a plus.Education and Experience RequirementsHigh School Diploma or GED required. Experience working on aircraft preferred. Knowledge of FARs and ODA/FAA Conformity requirements desired. Position Purpose:Acquire accurate information pertinent for fabrication and Inspection of flammability test samples required. to show proof of flammability for materials used in the aircraft during the completion interior installation.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for some Quality Control inspection pertaining to flammability issues for the ODA and Repair Station . Responsible for some review of aircraft documentation . Complete flammability request forms for the fabrication of test samples . Fabricate flammability test samples as required. Keeps accurate, neat and legible records of the work performed on aircraft . Writes discrepancies and keeps track of all work order documents . Completes turnover for the succeeding individual to assure continuity of process .Additional Functions: Assures completion of projects on assigned aircraft . Completes turnover for the succeeding shift to assure continuing inspection responsibility .Perform other duties as assigned.Additional InformationRequisition Number: 221802Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/12/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JC1

Flight Test Aircraft Technician IIin GAC SavannahUnique Skills:Previous flight test experience preferredEducation and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 221975Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Senior NDT Technician Productionin GAC SavannahUnique Skills:Overall Job ExpectationsNDT supervised OJT logbook with signaturesNDT formal training certificationsMust be able to work any/all shifts; unscheduled overtimeMust be able to pass all certification exams within a reasonable period of time (typically within one month of start date)Preferred:NDT certification in Ultrasound (UT) and Radiograpy (RT)NDT certification in one of the otherprimary methods: Eddy Current (ET), Magnetic Particle (MT), Liquid Penetrant (PT)Ability to read and interpret blueprints and catia drawingsMicrosoft Office programs, to include Excel, Power Point, and AccessSoluminaSAPAutomated NDT Testing Equipment (Squirter/TTU; Immersion)Education and Experience RequirementsHigh School Diploma or GED required. 4 years of NDT related experience required.. Certified in 2 NAS 410 NDT methods required. and must be able to be certified in a third method within 1 year. . Other Certification in more than 2 NAS 410 NDT methods preferred. ASQ certificate (American Society for Quality) preferred. Position Purpose:In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies and installations are built to type design dataJob DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures . Records, organizes and evaluates test results and enters results into applicable documents . Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing . Maintains equipment and assures calibration for tests to be performed . Maintains inventory control of area equipment .Additional Functions: Works with and assists other NDT Technicians as required. . Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness . Provides technical assistance to subordinate level NDT technicians . Performs process control on area inspection equipment . Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms . Performs automated ultrasonic C-scan inspection of composite parts . Must be available to work any shift .Perform other duties as assigned.Other Requirements: Must provide formal NDT training records. NDT experience on determining product acceptability preferred. Experience in blueprint reading and interpretation. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal and communication skills. Must demonstrate good housekeeping and safety practices. Proficiency in current computer-based software. Must be able to lift and transport objects up to 40 pounds. #LI-KP2Additional InformationRequisition Number: 222117Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Upholstery Tech Srin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose:Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns.Additional Functions: Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . Conduct safety audits and assists team members in doing safety audits. . Assist in maintaining shop equipment and associated JSAs. . Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221934Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Seniorin GAC SavannahUnique Skills:Candidates must be able to work any shift as assigned by Service Team ManagerLet your career take flightGulfstream employees benefit form a total rewards package that includescompetitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221058Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Flight Test Senior Aircraft Technician (A&P)in GAC SavannahUnique Skills:Previous Flight Test experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 221977Category: Service CenterPercentage of Travel: Up to 25%Shift: ThirdEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician IIin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includescompetitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221062Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics/Electrical Technician IIin GAC SavannahUnique Skills:Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.High School Diploma or GED and valid Driver’s License required.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 220644Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician A&Pin GAC SavannahUnique Skills:Must be able to work 3rd shift.G-550 experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220663Category: Service CenterPercentage of Travel: Up to 25%Shift: ThirdEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Flight Test Avionics/Electrical Technician IIin GAC SavannahUnique Skills:Previous Flight test experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 221976Category: Service CenterPercentage of Travel: Up to 25%Shift: ThirdEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Install Technician Srin GAC SavannahUnique Skills:G500/G600 experience or G650 experienceCatia experienceEducation and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 220920Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Iin GAC SavannahUnique Skills:Ability to work first or second shifts and overtime.Education and Experience RequirementsHigh School Diploma or GED required. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 221683Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Inspector Sr A&Pin GAC SavannahUnique Skills:First Shift Monday through Thursday.Gulfstream Mid/Large Cabin Experience Preferred; Flight Safety Initial Preferred but not Required; Must be Able to Lift 50 Lbs, Must be Able to Work from Ladders, Stands, and Heights; Must be able to Occasionally Work in Confined Spaces; Must be Proficient with Computers.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221642Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Seniorin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221090Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sheetmetal Tech Sr - Special Missionsin GAC SavannahUnique Skills:Must have strong sheetmetal skillsMust be familiar with paper blueprintsMust be able to work second shiftEducation and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred.. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Coordinate with other disciplines concerning projects. . Perform Lead responsibilities, as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221121Category: OperationsPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Inspector Sr A&P - Special Missionsin GAC SavannahUnique Skills:Structural modification and/or avionics installation experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220164Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician IIin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221089Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanic Team Lead-A&P (4th Shift-Weekend Days)in GAC SavannahUnique Skills:Availabilty to work 4th Shift (Weekend Days)Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221232Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Equipment Maintenance Tech Sr. - 2nd Shiftin GAC SavannahUnique Skills:Must be able to work 2nd shift and trouble shoot voltage up to 3 phase 480 volts. Know PLC and Drives.Education and Experience RequirementsHigh School Diploma or GED required. 5 years experience working with electrical controls and mechanical applications in a manufacturing environment, to include experience working with aircraft related production, equipment in the aerospace industry. 2 year technical degree may offset one year of experience. Position Purpose:Under minimal supervision provides advanced experience with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues. Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules. Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. specifications. Performs setup and calibrations on scheduled intervals for all aircraft related production equipment. Regularly performs backups of process parameters and PLC programs for all equipment. Daily input of required. data in CMMS system for machine reliability and control. Ability to implement project objectives on key pieces of automated equipment with minimal guidance. Recommends or initiates modification or replacement of equipment components which fails to meet acceptable operating standards. Submits parts request on critical spares identified as non- stock items.Additional Functions: Interfaces daily with key Management and Production personnel regarding all Automated Equipment. . Assists with Engineering in all acceptance testing and training. .Perform other duties as assigned.Other Requirements: Ability to work any shift. Demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used. Knowledge of Programmable Logic Controllers (Allen Bradley & Siemens Controls preferred). Background in CNC Equipment (Mazak, Mori Seiki, Fryer, Alpha Harrison, Broetje, Kuka preferred). Background in GSE Equipment (Hobart, Unitron, Tronair, Lektro Tug preferred). Must be able to read electrical schematics and blue prints. Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine alignments (Laser Alignment experience a plus). Experience in the alignment of turrets and the installation of ball screws is a plus. Working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred. Additional InformationRequisition Number: 218761Posting Type: Internal-ExternalDepartment: J0471-FAC GSE AT ManageCategory: FacilitiesPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Certification Inspector A&Pin GAC SavannahUnique Skills:Airframe and Powerplant license required.Education and Experience RequirementsHigh School Diploma or GED required. 7 years aircraft inspection experience to include 3 years inspection experience on large or mid-size aircraft (or same type and complexity as GAC aircraft). A&P (FAA Airframe and Powerplant) license required. ASQ certificate (American Society for Quality) preferred. Other Inspection Authorization (IA) preferred. Other DAR/DMIR/ODAR/ODA-Unit Member in good-standing preferred. Position Purpose:Performs airworthiness and certification inspections in a timely manner to ensure aircraft and/or component airworthiness. Physically inspects aircraft, components, and reviews related documentation to ensure workmanship meets acceptable standards of quality and customer aircraft/components are returned to service in an airworthy condition with all required. documentation properly completed and filed. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as a part of Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/ODA requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs inspection and airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, and other related documents. Conducts first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensures all associated records are completed . Performs inspections and certifies acft/component as airworthy prior to delivery and Return to Service . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Ensures aircraft/components are airworthy prior to any flight activities . Issuance of FAA 8130-3 Forms in accordance with FAA/ODA requirements for authorized functions and activities to include conformity, prototype, export, and 14 CFR Part 43 Return to Service activities . Performs certification inspections to type design requirements in support of acft/component certification . Monitors repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and QC Manuals . Develops and approves acft log book entries relating to acft configuration and installations . Performs FAA acft/component certification activities as an IAR . Manages Product/Article certification activities . Provides technical support to inspection personnel supporting FAA and/or ODA documented requirements . Supports coordination of inspection workloads .Perform other duties as assigned.Other Requirements: Competent in use of all job related tools and equipment. Proficient in blueprint/drawing reading, use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications and other manufacturing/inspection related documentation. Must possess working knowledge and application of Quality Assurance or Quality Control systems and methodologies. Must possess a verifiable working knowledge of FAA Regulations, Orders, and other guidance pertinent to issuance of export airworthiness approvals & conformity determination as defined in FAA Order 8100.8D Appendix A (as revised) and 8100.15 (as revised). Able to complete FAA/ODA initial/recurrent designee training within established timeframe to include obtaining a passing certificate as part of IAR application process. Must be capable of obtaining IAR designee appointment within established timeframe depending on Airworthiness and Conformity function code(s) required. for position. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221042Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft