Please Accept our Privacy Policy
Winbro Group Technologies
Rock Hill, SC 29730 • (41.8 miles) • Full Time • 11/22/2026
Winbro Group Technologies is an acknowledged world market leader in the development and manufacture of advanced machine systems, technology and services. In addition to providing turnkey solutions for the aerospace and land-based gas turbine industries, Winbro has an approved component manufacturing facility which utilizes our own machines and technologies. 3rd Shift 10:45 pm - 7:15 am - pays shift differential The Maintenance, Build & Service Engineer will work with our customers (External and Internal) to ensure our products and systems provide maximum performance, improving productivity, reliability, and safety. Working independently to troubleshoot and provide solutions to machine breakdowns, installation, commissioning, and on-going maintenance of Winbro equipment including machines,Scott Safety
Monroe, NC 28110 • (31.7 miles) • Full Time • 11/21/2026
Quality Inspector III is responsible for ensuring that the product received from Scott Safety’s Supply Chain is inspected thoroughly against all applicable requirements and specifications stated on relevant documentation. This individual will play an important role in qualifying product through First Article Inspections, and identifying non-conforming product on the front end to prevent down time, and scrap. This position is progressive to the Quality Inspector II position and would require at least 3 years of experience in role OR demonstrate skills and ability as listed below. DUTIES AND RESPONSIBILITIES Perform Receiving Inspection and First Article Inspection on incoming product. Use databases and ERP systems to document material transfers in and out of the Quality Warehouses. Use variIgnis Global Recruitment
Fort Mill, SC • (42.2 miles) • Full Time • 11/21/2026
Salary : Up to $155K base depending on experience and location, plus an annual performance-based bonus Location : Fully remote, anywhere in the US near a major airport The consultancy • Fire protection and life safety consulting engineering firm • Growing its process safety team, with food manufacturing a big sector for the firm • Salaried roles with flexible schedules, and project coordinators who book your travel and handle expenses The role • Leading and performing combustible dust hazard analyses (DHAs) • Fire and explosion protection work alongside the DHAs • No business development or winning work. Your client contact comes through managing your projects. Technical scope • Combustible dust hazard analyses to NFPA 652, 654, 660, 61, 484 and 664 • Explosion protection: venting, suppresCAVA - Carmel Commons
Charlotte, NC 28226 • (42.2 miles) • Full Time • $16.00 / hr • 11/21/2026
Team Members At CAVA, we love what we do, and we try and make every day as fulfilling as the last. Our restaurants need team members to make the magic happen every day. Everyone matters and we’re here to celebrate your growth. We foster a culture built on five core values: Positivity – Every one of us can change someone’s day for the better. Transparency –We use transparency to help us make decisions through open dialogue Humility – We can always find ways to improve. Fanaticism – We are passionate about the opportunity to turn every guest into a fanatic. Thoughtfulness –We go above and beyond for our guests, our teams and communities. The Role: Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting gSubaru South Charlotte
Pineville, NC • (43.9 miles) • Full Time • 11/21/2026
Service Technician – Subaru South Charlotte Charlotte, NC 5-Day Work Week | No Sundays | Paid Training | Climate-Controlled Shop | Toolboxes Provided Tired of working in extreme heat or freezing temps? Subaru South Charlotte is hiring experienced Service Technicians who are ready for a better environment, better pay, and better opportunities. Whether you’ve worked with domestic, import, or luxury brands- we welcome all backgrounds and provide the training and support you need to succeed. Why Join Our Team? 5-Day Work Week – enjoy a healthy work-life balance Climate-Controlled Service Bays – no more sweating through summer or freezing in winter Paid Training & ASE Certification Support Toolboxes & Carts Provided – show up ready to work Technician Bonus Program – get rewarded for your perforDRT Holdings, LLC
Midland, NC 28107 • (43.9 miles) • Full Time • 11/21/2026
Are you a skilled Swiss Lathe Machinist who takes pride in producing high-precision parts? We're looking for a motivated Swiss Lathe Machinist to join our growing manufacturing team. This position is responsible for the setup, operation, inspection, and on a Swiss Lathe machine while ensuring safety, quality, and production goals are met. If you enjoy problem-solving, working with advanced equipment, and being part of a team that values craftsmanship and continuous improvement, we'd love to hear from you! Key Responsibilities Machine Setup & Operation: Set up and operate conventional Swiss Lathe. Blueprint Interpretation & Planning: Study blueprints, drawings, and specifications to determine dimensions, tolerances, sequence of operations, and setup requirements. Tooling & Fixturing: SelectTown Of Stallings
Matthews, NC 28104 • (35.5 miles) • Full Time • 11/21/2026
The Town of Stallings is seeking a highly motivated, skilled, Planning Technician. An employee in this class performs a variety of specialized administrative, customer service, record-keeping, and GIS duties in support of the Planning and permitting processes for the Town. Employee provides information to developers, contractors, and homeowners regarding the zoning, sign, demolition, and other permits processes, reviews and interprets relevant Town ordinances to assist customers in obtaining proper permits, receives and routes applications, accept applicable fees, issues approved permits, schedules and coordinates compliance inspections, and tracks permits. Work also includes greeting the public, explaining requirements, establishing electronic and hard copy records, handling complaints, pIcon Aerospace
Indian Trail, NC 28079 • (36.3 miles) • Full Time • 11/21/2026
Job description Icon Aerospace has an exciting opportunity as an ATE Technician Under general supervision, this position is responsible for ensuring the ATE team's compliance with FAA regulations for Part 145 repair shop by inspecting, testing, troubleshooting and repairing equipment used on aircrafts. Training to specifics of this position will be provided. Detailed Description: Assist with troubleshooting faults in electronic circuits and systems using various types of test equipment e.g., Special Test Equipment "STE", Automated Test Equipment "ATE", data analyzers, microprocessors emulators, circuit testers, oscilloscopes, and multi-meters. Assist with reading and interpreting production illustrations (PI), wiring diagrams, schematics, understanding symbols, flag notes, and general noteSalute Inc.
Matthews, NC 28105 • (39.4 miles) • Full Time • $75,000 to $105,000 / yr • 11/21/2026
A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: South Dallas, TX LubboVolkert Inc
Rock Hill, SC 29730 • (41.8 miles) • Full Time • 11/21/2026
Are we the road to your future? We are currently searching for talented CEI Inspectors to support our Carolinas Region statewide in North Carolina . This position welcomes candidates who are willing to commute from South Carolina to work in the state of North Carolina. To be considered for this position, applicants musthave, at minimum, an Associate's degree in an applicable area of Engineering Technology, Survey Technology or a related curriculum from an appropriately accredited institution. The successful candidate will perform technical duties supporting engineers and other professionals in the administration of highway construction. Such areas include, construction inspection, project roadway/structure inspection, materials testing, project surveying, and program/regulatory compliance.Salute Mission Critical LLC
Hamlet, NC 28345 • (42.3 miles) • Full Time • $75,000 to $105,000 / yr • 11/21/2026
A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: Jackson, MS Atlanta, GCL&D Graphics LLC
Rock Hill, SC • (43.7 miles) • Full Time • 11/21/2026
Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. As a Press Assistant, you play a key role in supporting the setup, operation, changeover, and maintenance of flexographic printing presses. You’ll work side-by-side with the Press Operator to keep production running safely, efficiently, and with minimal waste-helping ensure every job is set up for success. You’ll be joining a 24/7 flexographic printing operation that offers stable, set scheduOceanaGold Haile Processing
Kershaw, SC 29067 • (11.5 miles) • Full Time • 11/21/2026
Company Description OceanaGold is a global intermediate gold and copper producer with more than 35 years of exploration, development and operating experience. We have four operating mines – Haile in the USA, Macraes and Waihi in New Zealand, and Didipio in the Philippines and a global workforce of ~5,400 employees and contractors. Our people, assets, and strategy are core to our success. Guided by our values-Care, Respect, Integrity, Performance, and Teamwork-we strive to be a trusted company people want to work for, partner with, supply and invest in, to create value. We are committed to safe and responsible mining that generates strong returns and contributes to sustainable development in the regions where we operate. OceanaGold is listed on the Toronto and New York Stock Exchanges (TSX:System One
Hartsville, SC 29550 • (22.8 miles) • Full Time • 11/21/2026
Job Title: Nuclear Field Engineer (Mechanical/Structural) Location: Hartsville, South Carolina Type: Contract Contractor Work Model: Onsite System One is seeking an experienced Field Engineer with a mechanical and structural background to provide on-site engineering and construction support for an active project at Robinson Nuclear Plant. This role will work closely with engineering, construction, maintenance, and outage teams to ensure safe, compliant, and efficient execution of mechanical and structural scopes in a nuclear environment. The ideal candidate brings hands-on field experience, strong technical judgment, and familiarity with nuclear plant processes, procedures, and safety culture. Responsibilities Provide field engineering support for mechanical and structural activities, inclThorson Baker & Associates Inc.
Charlotte, NC 28277 • (39.2 miles) • Full Time • 11/21/2026
Description: Participate as a team member in the technical development of schematic, design development, construction documents, specifications and construction administration for institutional and commercial building projects. Job Duties: Electrical engineering of power and lighting systems for institutional, retail and commercial building projects. Support the electrical engineering department in preparing calculations and well-coordinated, technically sound construction documents that are cost-effective, efficient and constructible in a friendly work environment. Perform engineering calculations including energy, load, photometrics, voltage drop etc. Assist in office construction administration including review of shop drawings, respond to RFI’s, and coordinate with contractors, designPremier Trade Services
Oakboro, NC 28129 • (41.7 miles) • Full Time • $28.00 to $34.00 / hr • 11/21/2026
Premier Trade Services is currently seeking an experienced Industrial Electrician to join our team in Oakboro, NC. *This is a great opportunity for a skilled electrician looking for a long-term position with the potential to transition from temporary to permanent employment* *Local Work Opportunity, No Per Diem Offered or Relocation Package* Why Electricians Choose This Opportunity: Earn a $500 Sign On Bonus : $250 after 90 days and an additional $250 after 180 days Earn up to a $300 Referral Bonus : $150 after your referral works 200 hours and another $150 after they reach 400 hours Overtime opportunities based on project demand PPE and work shirts provided Consistent hours for Electricians who want stable income Duties include, but not limited to: Cutting, bending, threading and runningGoken
Norwood, NC • (43.9 miles) • Full Time • 11/21/2026
Headquartered in Dublin, Ohio (USA) with Engineering Centers in Pune, India and Yokohama, Japan, Goken is a global Engineering Services and Product Development company founded in 2004. We partner with OEMs and suppliers across the mobility space, as well as clients in non-mobility industries, to deliver innovative solutions and accelerate product development. At Goken, we embrace our motto of "Time to Innovate" by pushing boundaries, cultivating entrepreneurial thinking, and empowering individuals who thrive on tackling challenges, embrace fresh ideas, and are driven to create solutions that shape the future. This mindset fuels our mission and empowers our teams to solve complex problems, deliver measurable value, and move our clients and industries forward. Our Vision is to empower associCEO Inc
Rock Hill, SC • (43.7 miles) • Full Time • $135,000 / yr • 11/20/2026
Position Overview A well-established, multi-site manufacturing company is seeking a Process Control Engineer to support and enhance automation systems within a fast-paced production environment. This role will focus on control system optimization, HMI development, and execution of control strategies that drive efficiency, reliability, and overall plant performance. Key Responsibilities Develop and refine automation strategies to improve process stability, product quality, and operational efficiency Create and maintain technical documentation such as control narratives, loop documentation, and system backups Troubleshoot and resolve control system issues in collaboration with maintenance and operations teams Work cross-functionally to support capital projects, system upgrades, and new equipNortheast Tool & Mfg
Matthews, NC 28104 • (35.5 miles) • Full Time • 11/20/2026
Step into a day on our shop floor At Northeast Tool & Manufacturing in Matthews, NC (just outside Charlotte), you’ll begin your shift by reviewing setup sheets and engineering prints for aerospace components that demand exacting precision. You’ll stage tooling, dial in offsets, run a first-article, verify results with gauges and digital metrology, then move into steady production-keeping an eye on tool wear, machine health, and surface finish. When parts roll off within spec, you’ll document results, complete any secondary operations, and keep your area buttoned up with 5S. What you’ll handle Operate a mix of equipment-5-axis mills, conventional mills, multi-axis mill-turns, lathes, and Wire EDM-to create precision metal parts for aerospace applications. Interpret blueprints, drawings, speSilfab Solar
Fort Mill, SC 29715 • (41.8 miles) • Full Time • 11/20/2026
Company Description Making a difference in the world by reducing carbon emissions and improving access to clean energy with every module we make. Our purpose is to make a difference in the world by reducing carbon emissions and improving access to clean energy with every module we make. At Silfab Solar, the energy of our people is the power behind our success. Our employees actively shape the solar innovations of tomorrow, while adhering to the highest ethical operating standards and promoting a respectful and safe workplace for our diverse workforce. Our state-of-the art facilities in the US and Canada engineer and design the latest generation of solar products and utilize advanced manufacturing technology to produce high-efficiency PV cells and modules intended to outperform the market.GITI TIRE USA LTD
Richburg, SC 29729 • (37.1 miles) • Full Time • 11/19/2026
Job Title Mixing Maintenance Planner FLSA Status: Non-Exempt Location: Chester, SC Summary The Mixing Maintenance Planner is responsible for planning, coordinating, and scheduling preventive and corrective maintenance activities for the Mixing Department. This position works closely with Maintenance Supervisors, Technicians, Production, Engineering, EHS, and other departments to ensure maintenance work is properly planned, parts and materials are available, and equipment downtime is minimized. The Mixing Maintenance Planner supports equipment reliability by maintaining accurate work orders, equipment history, preventive maintenance schedules, parts requirements, and maintenance documentation within the Computerized Maintenance Management System (CMMS). This position plays a key role in impPattison Sign Group Inc Plant
Heath Springs, SC 29058 • (22.1 miles) • Full Time • 11/19/2026
SETTING Pattison ID is a highly successful, North American Company growing organically and through ongoing acquisitions. It is one of the world’s largest sign and physical branding element companies, with six (6) manufacturing facilities, eight (8) sales and operations offices and over 1000 employees across North America. Pattison ID has many segments, such as Signage, Architecture, Digital, Maintenance and Leasing. The company is dedicated to absolute customer satisfaction and the ultimate quality in its products and services. The culture of the company is focused on performance and accountability and supports employee empowerment and development. The company operates independently within The Jim Pattison Group, headquartered in Vancouver, and comprised of over 800 locations worldwide. ThCathay Home Inc
Lancaster, SC 29720 • (23.1 miles) • Full Time • $26.44 to $40.86 / hr • 11/19/2026
Benefits: Competitive salary Opportunity for advancement Paid time off The Industrial Mechanic is responsible for ensuring the peak operational efficiency, safety, and reliability of all automated and semi-automated machinery within our pillow manufacturing facility. This role goes beyond standard repairs; you will actively analyze machine performance, reduce downtime, and implement mechanical engineering modifications to optimize the production of foam, fiber-fill, down, and ergonomic pillows. Responsibilities Preventative & Corrective Maintenance: Perform routine inspections, calibrations, and emergency repairs on specialized pillow production equipment including high-speed fiber carding machines, blowing systems, automated stitching/sewing lines, foam slitters, compression packaging uniCAVA - Waverly
Charlotte, NC 28277 • (39.2 miles) • Full Time • $16.00 / hr • 11/19/2026
Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when weProTrade LLC
Peachland, NC 28133 • (21.8 miles) • Full Time • $26.00 to $35.00 / hr • 11/19/2026
ProTrade is seeking a skilled Millwright for upcoming shutdown and maintenance work. We’re looking for a hands-on, mechanically inclined jack of all trades who can hit the ground running and get the job done right. What You’ll Be Doing: Assisting with scheduled shutdown and maintenance operations Turning wrenches and performing mechanical repairs and installations Changing out pumps and rotating equipment Performing welding as needed on site Supporting millwright duties across various systems and equipment What We’re Looking For: Strong mechanical aptitude - jack of all trades mentality Millwright background or equivalent hands-on industrial maintenance experience Welding ability - must be able to come on site and pass a weld test Comfortable working in a fast-paced shutdown environment ReAkona Process Solutions
Monroe, NC • (28.5 miles) • Full Time • 11/19/2026
Akona Process Solutions unites four trusted brands-Spiroflow, Kason, Cablevey, and Marion-to deliver advanced material handling and processing systems. With over 200 years of combined expertise, we design mixers, dryers, screeners, conveyors, and complete bulk handling solutions that enhance efficiency, hygiene, and performance across food, pharmaceutical, nutraceutical, and chemical industries. Headquartered in Charlotte, NC, Akona serves customers worldwide through centers of excellence in the USA, UK, and Germany. Position Summary The Panel Builder is responsible for assembling, wiring, testing, and troubleshooting industrial control panels, electrical enclosures, and related equipment according to engineering drawings, schematics, and customer specifications. This position requires strSURTECO NORTH AMERICA INC
Monroe, NC 28110 • (31.7 miles) • Full Time • $22.98 to $28.24 / hr • 11/19/2026
If you're looking for a collaborative work environment with an established organization that also offers great employee benefits and career advancement opportunities, then we invite you to consider applying for a position with SURTECO. SURTECO specializes in the production and sale of laminates, foils and vinyl-coated fabrics. Our technologies, products and services deliver distinctive performance features, thus helping to support our Customers’ reputations for trusted brands around the globe and in a wide variety of markets. We are seeking an individual who is passionate about joining a team in the manufacturing of high quality laminates and films used in a variety of applications including on cabinetry in kitchen and bath applications, countertops and paneling in recreational vehicles anConsolidated Metco
Monroe, NC 28110 • (31.7 miles) • Full Time • 11/19/2026
ConMet is currently seeking a creative, collaborative and skilled Manufacturing Engineer to join our Advanced Manufacturing team to support our growing machining operations for our aluminum and ductile iron products. The role is based in Monroe, NC. This role serves as on-site technical representative of the Advanced Manufacturing Engineering (AME) team, acting as primary local owner of Aluminum Hubs and Iron Drum machining of wheel end products. This person is responsible of machining equipment, tooling and inspection specifications, validation and change readiness at the Monroe, USA and Monterrey, Mexico machining facilities. This person serves as the technical authority for machining processes, engineering changes, audits, and specification compliance in support of launches and change iCommtech Services Inc
Pineville, NC 28134 • (43.7 miles) • Full Time • $25.00 to $28.00 / hr • 11/19/2026
What You’ll Do Assemble and wire electrical panels, harnesses, and components with accuracy and consistency. Read and interpret schematics, blueprints, and wiring diagrams to build systems correctly the first time. Inspect and verify work to uphold safety, quality, and performance standards. Collaborate with mechanical assemblers, engineers, and supervisors to ensure each project meets company expectations. Maintain an organized, safe, and professional workspace. Support general shop activities and cross-train on equipment assembly as needed. Follow all safety and operational procedures - precision begins with discipline. Who You Are Detail-oriented and steady-handed, with a passion for clean, logical wiring and layout work. A proactive problem solver who asks the right questions and thinkCommunity Association Management
Charlotte, NC 28211 • (44.9 miles) • Full Time • $38,000 to $41,600 / yr • 11/19/2026
Because Communities Deserve Better! At Community Association Management, we take pride in maintaining the beauty, integrity, and compliance of the neighborhoods we serve. Our WHY is simple - to creatively find solutions and overcome challenges so that we can work together to advance the common cause. The Compliance Inspector plays a crucial role in this mission by helping communities stay true to their standards. About the Role As a Compliance Inspector, you are responsible for regularly inspecting residential communities to ensure alignment with governing documents and standards. You’ll identify potential violations, communicate with Community Managers, and maintain accurate, actionable records to support community compliance efforts. This role is field-based and includes a minimum of 4 hIndustrial Inspection & Analysis
Fort Mill, SC 29715 • (41.8 miles) • Full Time • 11/18/2026
Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in North or South Carolina . Position Overview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper cPro Mach Inc.
Rock Hill, SC • (43.7 miles) • Full Time • 11/18/2026
Join ProMach and shine. Whether you're creative, strategic, persuasive, or mechanically inclined, there’s a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we’ll be proud to have you on the journey. Do we have your attention? Keep reading. As a Press Assistant, you play a key role in supporting the setup, operation, changeover, and maintenance of flexographic printing presses. You’ll work side-by-side with the Press Operator to keep production running safely, efficiently, and with minimal waste-helping ensure every job is set up for success. You’ll be joining a 24/7 flexographic printing operation that offers stable, set scheduExpress Employment Professionals - Monroe, NC
Matthews, NC 28105 • (39.4 miles) • Full Time • $24.00 to $28.00 / hr • 11/18/2026
Auto- CAD Operator Location: Indian Trail, NC Area Pay: $24–$28/hour, depending on experience Shift: Monday–Thursday, 7:00 AM–4:30 PM; Friday, 7:00 AM–12:00 PM Role Overview We are seeking an experienced CAD Operator to create permit and shop drawings for highly customized projects. This position works closely with project management, sales, engineering, and R&D teams to ensure drawings are accurate and ready for production. Key Responsibilities Create permit and shop drawings using AutoCAD Manage multiple drawing projects and deadlines simultaneously Prepare drawings for internal review and engineering approval Support the bill of materials process through accurate drawings and documentation Review and check your own work for accuracy before submitting drawings for final review CollaboratM.C. Dean, Inc
Rock Hill, SC 29734 • (41.8 miles) • Full Time • 11/18/2026
Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forRexroth
Pineville, NC 28134 • (43.7 miles) • Full Time • 11/17/2026
Company Description Our drive and control technologies ensure efficient, powerful and safe movement in machines and systems of any size. We inspire our customers with intelligent components, tailored system solutions, and services – from fully connected applications to the factory of the future. Bosch Rexroth is dedicated to making the world a better place through innovation and technology. We are looking for associates who will take on our customers’ challenges with passion and persistence until the right solution is found and who will thrive in a face-paced, collaborative and exciting environment. Why work with Bosch Rexroth? Challenging Projects : We are driven by innovation and being at the cutting edge of everything that we do. At Bosch Rexroth every day is different and your time wilHunter The Head Hunter
Cheraw, SC 29520 • (24.6 miles) • Full Time • $75,000 to $100,000 / yr • 11/17/2026
R&D Scientist – Bakery Applications Location: Cheraw, South Carolina (Onsite) Industry: Food Ingredients / Commercial Bakery / Food Manufacturing About the Opportunity Thymly Products, an established manufacturer of specialty food ingredients and customized bakery solutions, is seeking an R&D Scientist / Bakery Applications Specialist to join its expanding operations in Cheraw, South Carolina. This is an exciting opportunity to play a key role in the launch of a new 52,000-square-foot manufacturing and blending facility while working directly with company leadership and supporting the continued growth of its commercial bakery business. We're looking for someone who brings a combination of hands-on formulation expertise, technical problem-solving skills, and an outgoing, customer-focused pePowerus Autonomous Systems
Rock Hill, SC 29730 • (41.8 miles) • Full Time • 11/17/2026
The challenge Imagine launching a new autonomous platform while doubling output in 120 days-without compromising safety or quality. That’s the environment at Powerus, where we design and industrialize the production systems that safeguard critical assets across defense, national security, critical infrastructure, and commercial sectors. Our mission is clear: deliver resilient autonomous technologies that enhance safety and strengthen national security in complex operations. As we scale, we need process builders who thrive on ambiguity and turn it into disciplined execution. Your 90-day impact Stand up stable, documented processes for a key product line, complete with standard work and control plans. Lead an 8D to eliminate a top Pareto defect; validate the fix with SPC and capability studiHandyman Connection Of Matthews, NC
Matthews, NC 28105 • (39.4 miles) • Full Time • $28.00 to $32.00 / hr • 11/16/2026
Benefits: Weekday Schedule Mileage Reimbursement Free uniforms Opportunity for advancement Training & development Bonus based on performance Handyman Connection of Matthews | Matthews, NC 28105 (serving South Charlotte, Matthews, Waxhaw, Pineville) Pay: $28–$32 per hour, plus a 32–35 hour guaranteed weekly floor. Weekday schedule. Steady, year-round work. The job We're a professional home-repair company, not a day-labor or gig outfit. We're looking for experienced craftsmen who can run most jobs on their own - and pitch in with the crew on the bigger ones. You'll handle a real variety of residential repair, maintenance, and remodeling work: carpentry, drywall, minor plumbing, minor electrical, and general repairs - with only occasional painting. You'll talk with customers, keep a clean jobAalberts Integrated Piping Systems
Pageland, SC 29278 • (10.1 miles) • Full Time • 11/15/2026
Quality Engineer - Pageland, SC Ready to change the future, your way? This is an excellent opportunity for a driven Quality Engineer to unlock your ambition and work the future at Aalberts. As a full-time Quality Engineer in the Quality Department at Aalberts, located in Pageland, SC, you will have direct responsibility for the quality of incoming components and finished goods. The Quality Engineer will work with our suppliers to ensure quality standards are communicated and met. the Aalberts way Aalberts is built on entrepreneurship. We believe the more space people are given, the greater their chance of finding brilliant solutions for our customers. That is why we encourage everyone to take ownership, think independently yet work as one team. You are in charge today of what happens tomorMcGee Corporation
Matthews, NC 28105-5098 • (39.4 miles) • Full Time • 11/15/2026
Description: McGee Corporation is seeking a skilled CAD Drafter to join our team. As a family-owned business since 1961, we pride ourselves on offering stable employment, competitive benefits, and a supportive work environment. The CAD Drafter position is responsible for producing detailed drawings and specifications based on information provided by customers and engineers. The ideal candidate is detail-oriented, skilled in AutoCAD, and thrives in a fast-paced, collaborative environment. Schedule: 7:00 AM to 4:30 PM Monday - Thursday, Friday 7:00 AM to Noon. CAD Orafter Key Responsibilities: Review project files for accuracy and completeness Determine proper project dimensions based on customer requirements and deck panel limitations Produce precise project drawings with accurate dimensionCritical Power Services, Inc.
Charlotte, NC 28227 • (42.1 miles) • Full Time • 11/15/2026
Electrical/Electronic Field Service Technician The Electrical Field Service Technician is responsible for the installation, preventive maintenance, scheduled and emergency services. The EFST is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. DESIRED SKILLS: Knowledge of UPS systems and electrical equipment ASSETS - nice to have but not necessarily required • 4+ years of hands on electrical/electronic experience (field service experience preferred) • Familiarity with electrical/electronic test equipment and fundamentals • Ability to read and interpret electrical line diagrams and blueprints • Working knowledge of OHM's law and electronic theory • Ability to evaluate the operating conditions of equRoller Bearing Company Of America, Inc
Hartsville, SC 29550 • (22.8 miles) • Full Time • 11/14/2026
Job Summary The Turn/Grind Set Up Operator: CNC Operator is responsible for setting up and operating CNC turning and grinding machines to manufacture precision metal components. This role requires expertise in machining operations, equipment setup, and quality control to ensure parts meet exact specifications. The operator will work independently and collaboratively to maintain production efficiency and uphold safety and quality standards. Essential Duties and Responsibilities include the following. Other duties may be assigned. Set up and operate CNC turning and grinding machines to cut, shape, and form metal workpieces to precise specifications. Read and interpret blueprints, process sheets, and job orders to determine machining requirements, tolerances, and tooling instructions. Mount wHarris Mechanical Rebuilds, LLC
Lamar, SC 29069 • (33.8 miles) • Full Time • $25.00 to $35.00 / hr • 11/14/2026
Benefits: Supplemental Insurance 401(k) 401(k) matching Free uniforms Paid time off Benefits/Perks Competitive Compensation Great Work Environment Convenient Schedule Job Summary We are seeking a Machinist to join our team! As a Machinist, you will be working with a variety of manual milling machines, manual lathes and manufacturing equipment as needed and per drawing or job order specifications. You will also be setting and maintaining your equipment as needed, assisting other machinists with larger tasks, and maintaining a safe work environment. The ideal candidate has exceptional attention to detail, previous experience in an industrial environment, and the ability to work well with minimal supervision. Responsibilities Set up, operate, and maintain machine tools to produce and repair pJones-Hamilton
Richburg, SC 29729 • (37.1 miles) • Full Time • $115,000 to $130,000 / yr • 11/14/2026
Job Title: Plant Engineer Reports To: Plant Manager Location: Richburg Department: Production Core Description: The Plant Engineer is a hands-on operational leader responsible for ensuring the safe, reliable, and efficient operation of chemical manufacturing processes and plant equipment. This role spends the majority of its time in the plant environment working directly alongside operators, maintenance personnel, and supervisors to troubleshoot issues, resolve production challenges, and support day-to-day operations. Serving as a key technical resource, the Plant Engineer is actively involved in identifying and addressing problems as they arise, driving continuous improvement initiatives, enhancing asset reliability, optimizing processes, and ensuring compliance with environmental, healthGardenCore
Pageland, SC 29728 • (10 miles) • Full Time • $27.00 to $30.00 / hr • 11/14/2026
Description: GardenCore is seeking an Industrial Electrician Technician that is responsible for ensuring the proper electrical functioning of plant equipment and machinery and to troubleshoot any electrical/electronic malfunctioning and complete appropriate repairs and maintenance. Responsibilities Maintain and repair all existing electrical equipment in production areas Install power supply wiring and conduit for newly installed machines and equipment Read blueprints, wiring diagrams, process sheets, experience with PLC’s, and assembly schematic drawings Diagnose and test malfunctioning machinery and discuss malfunctions with other facility personnel Calibrate and adjust all electrical/electronic equipment according to manufacturer’s specifications Requirements: Associate’s degree or TechConMet Plastics
Monroe, NC 28110 • (31.7 miles) • Full Time • $125,000 to $140,000 / yr • 11/14/2026
Your mission Orchestrate an end-to-end supply chain that is reliable, lean, and data-driven across Monroe and its offsite locations-spanning Master Scheduling, Materials Planning, Warehouse Management, Receiving, Sequencing, Shipping, and Inventory Control-while overseeing planning and purchasing for nonproduction materials and services. Where you’ll focus Master scheduling and production control that stabilizes the plan and aligns to customer demand. Materials planning with robust SAP master data and disciplined MRP usage. Warehouse, receiving, sequencing, shipping, and distribution logistics that run efficiently and safely. Nonproduction procurement, including services and indirects. Customer service partnership to meet delivery and information-quality requirements. IT collaboration to sTalnt
Matthews, NC • (39.4 miles) • Full Time • $80,000 to $120,000 / yr • 11/14/2026
CNC Programmer Matthews, NC | Full-Time | On-Site Compensation: $80,000 - $120,000 annually , commensurate with experience. Exceptional candidates with demonstrated expertise may be considered above this range. About the Role: We are seeking an experienced CNC Programmer to develop, validate, and optimize CNC programs for highly complex, tight-tolerance aerospace, defense, and space components. This is a hands-on manufacturing engineering role requiring complete ownership of the programming process, from machining strategy and tooling selection through setup documentation, verification, production support, and continuous improvement. The ideal candidate is more than an experienced Mastercam programmer. They are a manufacturing expert who consistently delivers production-ready programs withThe Sharon At SouthPark
Charlotte, NC 28210 • (44.7 miles) • Full Time • $22.00 / hr • 11/13/2026
We enrich the lives of those we serve by providing a nurturing environment that fosters joy, purpose, and well-being. The Sharon at SouthPark is a continuing care retirement community for senior residents located near the heart of SouthPark. We are a non-profit long term care facility that offers independent living, assisted living, and skilled nursing care. At the Sharon at SouthPark our team member's number one responsibility is to deliver compassionate resident care every time! We believe by demonstrating our unifying principles of stewardship, unity, purpose, excellence in service, respect, and beauty this can be achieved daily. SUMMARY The Facilities Painter is responsible for painting common areas thru out the campus, Healthcare/Assisted living rooms and residential apartments and coTAG Refrigeration
Rock Hill, SC • (43.7 miles) • Full Time • 11/11/2026
The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. TAG Refrigeration is seeking Refrigeration Service Technicians for commercial service work in and around the Rock Hill, SC area. Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supports grocery and retaiMar Mac Industries, Inc.
McBee, SC 29101 • (12.3 miles) • Full Time • $20.59 to $27.17 / hr • 11/11/2026
SUMMARY: Sets up and operates one or more drawing machines to perform all operations required to draw a variety of wire sizes and specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sets up and operates wire drawing machines to draw appropriate finished wire sizes as specified on work orders. Loads work with forklift and threads according to established procedures. Selects and installs proper dies for drawing parts and pilots for holding and centering wire. Sets guards as required. Adjusts equipment and changes dies as required to ensure wire meets specifications. Selects appropriate rod from stock. Welds rod together as reKelly Services
Lancaster, SC 29720 • (23.1 miles) • Full Time • 11/11/2026
Quality Assurance Auditor Location: Lancaster, SC Shift: Monday – Friday | 1st Shift Salary: $70,000-$95,000/year + Annual Bonus Opportunity We are seeking a Quality Assurance Auditor to develop and maintain an effective internal compliance program to support adherence to applicable regulations and quality standards. This role plans and conducts internal and external audits, manages supplier audit activities and corrective actions, and works with teams across the organization to strengthen compliance and inspection readiness. What You'll Do: Plan, schedule, and conduct internal and external audits to assess compliance with applicable regulations and quality requirements. Audit external suppliers, contract manufacturers, laboratories, and other service providers; maintain the supplier qualiTrueNet Communications
Rockingham, NC • (39.9 miles) • Full Time • 11/11/2026
The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicablSTIWA US INC
Rock Hill, SC 29730 • (41.8 miles) • Full Time • $20 to $25 / yr • 11/11/2026
Do you have a good understanding of electrical basics, an eye for detail, and a desire to develop your skills in industrial automation? We’re looking for a motivated Electrical Assembly Technician to join our team. This role combines hands-on electrical assembly in our Rock Hill facility with commissioning and service at customer sites around the world. You’ll bring a foundation in electrical components, circuits, and reading schematics, along with curiosity about how systems work. With thorough training from day one, you’ll build on that foundation to assemble, troubleshoot, and commission our automation systems. Your duties Build, Launch & Wire: Take ownership of the full assembly and commissioning cycle by reading and interpreting electrical schematics to route installation wiring, wireFine Turf LLC
Charlotte, NC 28210 • (44.7 miles) • Full Time • $65,000 to $85,000 / yr • 11/11/2026
Description: Reports to: Director of Sales and Customer Service Works with: Team Leads, Operations Manager, Sales Team, Customer Service Pay: $65,000 base + 5% commission on new sales (paid as produced) + bonus (TBD) Schedule: Monday–Friday, 6:30 AM–4:00 PM The role The Quality Manager is FineTurf's turf expert and owns every lawn, service, and cancel issue. Billing and account questions stay with Customer Service. When a customer has a complaint, wants to cancel, or needs answers, the Agronomist figures out what's happening, makes sure it gets fixed, and keeps the customer on service. Top priorities Own every service call. Every service call and complaint comes to you first. Decide who handles it, assign it, and follow up until it's resolved, within 48 hours. You route only your own serviGallman Consulting
Elgin, SC • (21.1 miles) • Full Time • 11/10/2026
This job is posted on behalf of Gallman Consulting by Top Echelon. About our Client: Our client is a rapidly growing specialty chemical manufacturer whose products support advanced coatings, adhesives, electronics, telecommunications, and other high-growth industrial markets. The organization is investing heavily in new product introductions, manufacturing capacity expansion, and long-term technical leadership. Today, the facility manufactures more than twenty commercial products, with numerous additional product introductions and technology transfer projects planned over the coming years. To support future demand, the organization is currently investing in expanded infrastructure, including additional warehousing capacity, administrative facilities, and future production assets. EngineeriNutramax Laboratories
Lancaster, SC 29720 • (23.1 miles) • Full Time • 11/10/2026
Description: The Setup Technician I will report to the Packaging Supervisor. The Setup Technician I will act upon specific written and/or verbal instructions furnished by the Packaging Supervisor to set-up plant equipment correctly for operation and effectively use time to meet company goals. Roles and Responsibilities: Set-up/operate pharmaceutical- processing/packaging equipment in conformance with current Good Manufacturing Practices (cGMP), clean rooms and equipment according to standard procedures and perform varied preventive maintenance duties. Performing set-up and adjustments to manufacturing/packaging equipment to ensure assigned machines run at peak efficiency and operations are within the cGMP guidelines and Standard Operating Procedures (SOPs).. Set-up/operate miscellaneous rePro-Tops
Monroe, NC 28110 • (31.7 miles) • Full Time • $17.00 to $21.00 / hr • 11/9/2026
Benefits: 401(k) matching Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Job Summary: We are seeking a skilled and reliable Bilingual CNC Stone Cutter for our 2nd shift (2:00 PM – 10:00 PM) to join our fabrication team. This role involves operating CNC machines to cut, shape, and finish granite, marble, quartz, and other natural or engineered stone surfaces. The ideal candidate should have experience with CNC machinery and be able to communicate effectively in both English and Spanish to support a diverse workforce. What You’ll Do Set up and operate CNC stone cutting machines according to design specifications and work orders. Load and secure stone slabs for cutting. Read and interpret bluDCS Lab
Matthews, NC 28105 • (39.4 miles) • Full Time • $70,000 to $90,000 / yr • 11/9/2026
CAD/CAM Designer – Fixed Restorations (3Shape) Location: Charlotte, NC (On-site) Employment Type: Full-Time (40 hours/week) About the Role A well-established full-service dental laboratory in Charlotte, NC is seeking an experienced CAD/CAM Designer – Fixed Technician with strong expertise in 3Shape to support high-quality fixed restorative workflows. This is an excellent opportunity for a skilled digital technician who enjoys hands-on involvement, teamwork, and working in a fast-paced production environment. Key Responsibilities Design crowns and custom abutments using 3Shape , including split-file workflows Perform Encode decoding and work confidently with scan bodies Support implant restorative cases from design through production readiness Pre-finish and work with green-state zirconia aSuperior Machine Co Of SC
Florence, SC 29501 • (42.1 miles) • Full Time • $25.00 to $32.00 / hr • 11/9/2026
We are seeking a highly skilled and motivated Industrial Electrician to join our team. As an Industrial Electrician, you will be responsible for installing, repairing, and maintaining electrical systems in our industrial facilities. This is a fantastic opportunity for an individual who is looking for a challenging and rewarding role in the electrical industry. If you have a passion for working with electrical systems and a commitment to ensuring their safe and efficient operation, then we want to hear from you ESSENTIAL DUTIES AND RESPONSIBILITIES : Install, repair, and maintain electrical systems equipment, and components in accordance with local and national codes and regulations. Diagnoses and troubleshoot complex electrical problems to include welding equipment and making repairs. PerfEliassen Group
Florence, SC • (44.9 miles) • Full Time • 11/9/2026
Description: On-site in Florence, SC Our client seeks an Electrical-Mechanical Designer to create models and detailed drawings for elevator system hardware using Creo and Pro Cable. The role will support engineers and internal stakeholders through 3D studies, prototyping, and change processes while driving robustness, cost reduction, and issue resolution. The designer will collaborate cross functionally to translate engineering markups into accurate models and documentation. The position requires proficiency with cable routing and wiring diagram tools alongside parametric design practices. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k wOrbia
Pineville, NC 28134 • (43.7 miles) • Full Time • 11/8/2026
Maintenance Planner / SAP Maintenance Specialist Location: Pineville, NC (onsite) Department: Operations / Maintenance At Alphagary, we are committed to operating safely, efficiently, and continuously improving our manufacturing operations. We are seeking a Maintenance Planner who will play a critical role in driving preventive maintenance programs, improving equipment reliability, coordinating maintenance activities, and supporting the successful utilization of SAP maintenance systems. About Orbia Polymer Solutions Alphagary: You are purpose driven. Growth minded. Ready to stretch your potential. That’s the spirit of the community you will find at Orbia: where the purpose to advance life around the world drives our global team of over 23,000 every single day. From creating solutions to deHarrell Design Group PC
Charlotte, NC 28277 • (39.2 miles) • Full Time • 11/8/2026
Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Progressive, dynamic, and growing heathcare-focused architectural and engineering firm located in Southeast Charlotte seeks a Senior Mechanical Engineer for our corporate headquarters. Requirements: · BSME or equivalent accredited professional degree · Registered Professional Engineer · Licensed in NC and SC or ability to obtain such with 60 days · Drivers License · Ability to travel occasionally · Physical ability to navigate project construction sites · 10 years minimum design and construction administration experience with a minimum of 7 years clinical healthcare and central plant design experience Responsibilities (upon completion of training and transition): MechanicalGableStone, LLC
Pineville, NC 28134 • (43.7 miles) • Full Time • 11/8/2026
Description: Join the Premier Countertop Manufacturing Team Artisan Design Group (ADG), a Lowe's company, is a leading national provider of interior finishings solutions for homebuilders and property management clients. ADG delivers end-to-end design, procurement, and installation services for flooring, cabinets, countertops, and a growing portfolio of interior products. Founded in 2016, ADG has grown by uniting respected regional operators across the country. Following its 2025 acquisition by Lowe's Companies, Inc., the company continues to operate as ADG while benefiting from the scale, resources, and brand strength of one of the most trusted names in home improvement. Together, they are expanding their capabilities in a highly fragmented market while remaining committed to craftsmanshipRock Hill GMC
Rock Hill, SC • (43.7 miles) • Full Time • 11/7/2026
We’re growing and actively hiring a General Motors Technician at all levels across our two top-performing locations: Rock Hill GMC and South Charlotte Chevrolet. We're looking for talented Quick Lube Technicians, Reconditioning Technicians, and Master Certified Technicians who are ready to take the next step in their careers within a supportive, state-of-the-art environment. Not sure which location is the right fit? Come tour our shops and meet the team! We’d love to show you what sets us apart. Who We Are At South Charlotte Chevrolet and Rock Hill GMC, we know that happy employees lead to happy customers. That’s why we invest in our team with career growth opportunities and a supportive work environment. Enjoy a full benefits package including medical, dental, vision insurance, 401(k), paAMBAC International
Elgin, SC 20945 • (21.1 miles) • Full Time • $17.00 to $23.00 / hr • 11/7/2026
We're Hiring: Entry-Level Remanufacturing Technician Location: Elgin, SC | Schedule: 4-day week | First Shift Do you like working with your hands, taking things apart, and figuring out how mechanical systems work? AMBAC International is hiring an Entry-Level Fuel Injection Remanufacturing Technician to join our employee-owned team in Elgin, SC. You’ll learn how to disassemble, clean, reassemble, and test fuel injection systems that power heavy-duty diesel engines in trucks, tractors, defense vehicles, and more. No prior experience? That’s okay-we’ll teach you everything you need to know in a team setting that values consistency, accountability, and hands-on learning. Why Join AMBAC? Employee-owned, and Open Book Managed Multi-year winner of Best Places to Work in South Carolina 4-day workwIndustrial Battery & Charger, Inc
Camden, SC • (29.5 miles) • Full Time • $20.00 to $25.00 / hr • 11/7/2026
As a Service Technician you will provide critical support through equipment maintenance, installation, troubleshooting, and repairs. You will work both independently and collaboratively within a team to ensure optimal device functionality and customer satisfaction during standard business hours. Responsibilities Perform maintenance and repair Troubleshoot technical issues and implement solutions Install new equipment according to specifications Provide prompt and professional customer support Ensure compliance with safety standards and protocols Preferred Qualifications 1+ years' experience in equipment maintenance High school diploma or equivalent Strong mechanical aptitude Customer service skills Effective problem-solving abilities Experience with technical documentation Knowledge of safWARN INDUSTRIES INC
Lancaster, SC 29720 • (23.1 miles) • Full Time • 11/6/2026
Warn believes that every team member plays a significant contribution role in our success. We enable our customers with the tools they need to work and play outdoors. This position description is designed to outline the primary duties of the role, qualifications, and job scope. Just as we do not want our customers to be limited in the outdoor space, we do not want to limit our employees nor the organization to just the work that is identified. It is our expectation that each team member will serve their customers wherever, whenever necessary to ensure the success of our endeavors Position Summary: Working independently and collaboratively with others, this position plays an integral role in executing our mission, philosophy, and commitment to providing high quality products and exceptionalIsolved
Charlotte, NC 28277 • (39.2 miles) • Full Time • 11/5/2026
Production Specialist (Temp-to-Hire) Why Join isolved? Be part of a fast-growing, well-capitalized company , recently backed by a $350M growth fund to fuel innovation and expansion Work with a leader in HR and payroll technology , ranked a top SMB Payroll provider in the 2023 Sapient Report Thrive in a people-first culture that values work-life balance, employee voice, and flexibility Engage with the People Heroes community, regional events and networks that bring HR professionals together for growth and recognition Join a company voted one of the Top Places to Work in the USA , where your career can evolve in payroll, benefits, and HCM technology About the Role We're seeking a Production Specialist who thrives in a fast-paced, detail-driven environment. This is a temporary position with pFirebirds Wood Fired Grill
Charlotte, NC 28277 • (39.2 miles) • Full Time • 11/5/2026
Overview At Firebirds, every role plays an important part in creating extraordinary guest experiences. As a Dish Machine Operator, you are a key part of our Back of House team-ensuring cleanliness, safety, and organization so the kitchen can operate at its highest level. Your work supports every plate that leaves the kitchen and every guest experience we deliver. What you can expect from us: Our team members are the most important stakeholder here at Firebirds Wood Fired Grill and such an important part of our brand. We ensure that our team members receive extensive training and development, are continuously set up for success, and feel welcomed in our Firebirds family! Never worked in a restaurant before but have a passion for learning more? It will be our pleasure to start you in a roleSynergy Engineering, PA
Charlotte, NC 28226 • (42.2 miles) • Full Time • 11/4/2026
Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Profit sharing Vision insurance BIM/VDC Engineering Technician Build Your Career with Synergy Engineering Are you interested in 3D modeling, engineering design, and solving real-world construction challenges? Synergy Engineering is looking for a motivated, detail-oriented individual to join our growing team. As a delegated design engineering firm, we support a wide variety of commercial construction projects. This position offers the opportunity to work alongside experienced engineers, develop technical skills, and gain hands-on experience with advanced modeling and design software. Whether you're beginning your career or looking to expand your technical expertise, we offer an environment where curiosity, collThe Q Works Group
Pageland, SC 29728 • (10 miles) • Full Time • $90,000 to $100,000 / yr • 11/3/2026
Ready to change the future, your way? The Plant Maintenance / Continuous Improvement Engineer is responsible for driving operational excellence through Lean manufacturing, Total Productive Maintenance (TPM), and structured problem-solving methodologies. This role ensures optimal equipment reliability, production efficiency, and continuous improvement across manufacturing operations. Your challenge Analyse manufacturing processes and equipment performance using Lean tools, root cause analysis, and data analytics to identify inefficiencies and improvement opportunities, focusing on Single-Minute exchange od Dies (SMED), AM/PM implementation...etc Lead and facilitate continuous improvement initiatives (Kaizen events, value stream mapping, robots / machine integrations and daily management actCarvana
Monroe, NC • (28.5 miles) • Full Time • 11/3/2026
We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from: Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing Lot Attendant: move vehicles from one department to the next in our Inspection Centers Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects Pay: Starting pay for this position is $17.00/hr. Schedule: Please keep in mind that all locations are subject to mandatory overtime based on busTransTech Energy
Rock Hill, SC 29730 • (41.8 miles) • Full Time • 11/3/2026
Position Open: AutoCAD Electrical Designer Location: Rock Hill, SC Reports To: Electrical Engineering Manager Company Overview: Cryogenic Technology Resources (CTR) is a leading provider of industrial gas products and services, helping customers enhance productivity and profitability by reducing labor costs, minimizing space requirements, and improving the operational efficiency of their industrial gas infrastructure. CTR is a part of the TransTech Group Portfolio of companies. TransTech Group is a premier provider of innovative engineered products and services, catering to the industrial process and energy sectors. TransTech Group operates through 7 portfolio companies with 13 locations across the United States, supported by a combined workforce of nearly 700 employees. TransTech Group deCAVA - Blakeney
Charlotte, NC 28277 • (39.2 miles) • Full Time • $16.00 / hr • 11/2/2026
Team Members At CAVA, we love what we do, and we try and make every day as fulfilling as the last. Our restaurants need team members to make the magic happen every day. Everyone matters and we’re here to celebrate your growth. We foster a culture built on five core values: Positivity – Every one of us can change someone’s day for the better. Transparency –We use transparency to help us make decisions through open dialogue Humility – We can always find ways to improve. Fanaticism – We are passionate about the opportunity to turn every guest into a fanatic. Thoughtfulness –We go above and beyond for our guests, our teams and communities. The Role: Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting gThe Cornerstone Equipment Company
Oakboro, NC 28129 • (41.7 miles) • Full Time • $40,000 to $60,000 / yr • 11/1/2026
Benefits: Bonus based on performance Company parties Competitive salary Employee discounts Opportunity for advancement Paid time off Training & development Job Posting – Formal Request Position Title: Equipment Sales Specialist – OPE, Mowers & Compact Tractors Location: Oakboro Tractor and Equipment – Oakboro, NC 28129 Department: Sales Reports To: Sales Manager Employment Type: Full-Time Posting Date: June 2026 Application Deadline: Open until filled Company Overview Oakboro Tractor & Equipment (aka The Cornerstone Equipment Co.), an independent, high-growth dealership representing Bobcat, Grasshopper, STIHL, ECHO, and Husqvarna, is seeking a sales specialist for our flagship store in Oakboro, NC. Our company is built on the foundational values of honesty and integrity, where customers arAmplified Electronic Design
Florence, SC • (44.9 miles) • Full Time • $18.00 to $35.00 / hr • 11/1/2026
As a technician, you will install, maintain, and troubleshoot life safety low-voltage systems, including wander prevention, nurse call, access control, locking systems, and CCTV. This position requires weekly overnight out-of-town travel, but generally home on weekends. Skills Relay logic 2 years experience, 2 year degree, or 4 year degree (Electronics, Computers or Engineering) Computer Knowledge Wireless networking Cable pulling Structure modifications using power and hand tools Follow all Safety policies and procedures Safely work in high-traffic areas Leadership skills a plus. Job Responsibilities: Install and repair low-voltage equipment in facilities located in several different states Safely operate and maintain a work vehicle Maintain accurate documentation including work orders, tCrawl Space Ninja
Matthews, NC 28104 • (35.5 miles) • Full Time • $28 to $32 / yr • 10/31/2026
Experienced Foreman (Waterproofing/Structural Repair) Job Description Full-Time Foreman $28–$32/hr Starting Pay Career Growth Opportunities We are a local construction company with over 20 years in the Waterproofing and Foundation Repair industry. As our company continues to grow rapidly, we are seeking motivated individuals looking for long-term, full-time employment. Starting Pay: $28.00–$32.00 per hour depending on experience. Higher earning potential with specialized skills. Qualifications for an ideal candidate: Must be able to operate construction hand tools and other specialized equipment safely, efficiently, and effectively Excellent communication skills Ability to adapt to a flexible work schedule and work in various types of weather Must have a strong work ethic and a positive atRiccobene Associates Family Dentistry
Charlotte, NC 28277 • (39.2 miles) • Full Time • 10/31/2026
Join a team where you can grow, feel valued, and make a real impact. At Riccobene Associates, we believe your career should bring fulfillment, support, and opportunity. If you're looking for a practice where you can build meaningful relationships and advance your skills, we’d love to meet you! We’re hiring a Full-Time Hygiene Assistant to join our Ballantyne team at 7940 Williams Pond Ln #200, Charlotte, NC 28277. We’re looking for a dependable, team-oriented DA II who is passionate about providing excellent patient care. In this role, you’ll work alongside engaged providers and a supportive clinical team in a fast-paced, growth-focused environment where collaboration and quality care are top priorities. Why Riccobene? (Our SMILE Values) S – Sincerity: Passion and excellence in everythingKatalyst Healthcares & Life Sciences
Florence, SC 29501 • (42.1 miles) • Full Time • 10/31/2026
Responsibilities: Lead the design, development, and deployment of advanced automation and controls systems for manufacturing operations. Serve as the subject matter expert for PLC architecture, HMI development, motion control, robotics, industrial networks, and machine safety systems. Develop automation strategies supporting factory modernization, capacity expansion, productivity improvement, and operational excellence objectives. Lead automation capital projects from concept development, technical specification, and business case approval through commissioning and production stabilization. Perform controls architecture design, hardware specification, programming standards development, system validation, and lifecycle support planning. Manage industrial robot integration, robot programmingMPE USA Inc
Pineville, NC 28134 • (43.7 miles) • Full Time • $28.50 to $30.00 / hr • 10/31/2026
Reports to: Production Manager Direct Reports: Blow Machine Operator, Assembly Machines Operator and other production resources on the floor Position Overview The Process Technician/Shift Supervisor is responsible for troubleshooting all process machines and production line setup and changeovers. The technician is responsible for building the initial samples to every start-up, for each machine. This role ensures optimal operation of blow molding and injection molding equipment while maintaining production tooling and supporting team training and development. The position serves as a technical leader and serves in the "Manager on Call" rotation for night shift operations. Essential Responsibilities Production Operations & Setup Supervise and control blow molding and injection molding machinSummit Drilling
Fort Mill, SC 29715 • (41.8 miles) • Full Time • 10/31/2026
Summit Drilling LLC Location: 9088 Northfield Drive, Fort Mill, SC 29707 – Charlotte Metro Job type: Full-time, on-site Compensation: $28–$33 per hour, based on experience and qualifications Position Summary: Summit Drilling is seeking a Diesel Mechanic / Heavy Equipment Diesel Technician to maintain and repair a mixed fleet of commercial diesel trucks, heavy construction equipment, yellow iron, off-road machinery, and drilling-support vehicles. This position performs preventative maintenance, DOT inspections, diagnostics, and major and minor repairs in shop and field environments. Work includes diesel engines, hydraulic and electrical systems, brakes, steering, transmissions, fuel systems, clutches, and cooling systems. A Class A CDL is not required at hire. Candidates must be willing andFSS Parent LLC
Matthews, NC 28105 • (39.4 miles) • Full Time • 10/31/2026
Program, and commission BAS systems (e.g., Distech, Honeywell, and potentially Johnson FX Controls. We service some Siemens, Schneider Electric, Trane Controls, but will usually remove and replace with Distech or Honeywell). Troubleshoot complex control issues in HVAC, lighting, and integration systems using diagnostic tools and software. Perform system upgrades and software updates, ensuring compatibility and minimal downtime. Configure and calibrate field devices such as sensors, actuators, controllers, and I/O modules. Read and interpret engineering drawings, sequences of operations, and control schematics. Collaborate with engineers, project managers, electricians, and mechanical contractors to execute projects on time and within budget. Maintain accurate documentation of system architHouse Doctors Of Rock Hill And Monroe
Waxhaw, NC 28173 • (29.1 miles) • Full Time • $25.00 to $35.00 / hr • 10/30/2026
Benefits: Bonus based on performance Company car Competitive salary Free uniforms Opportunity for advancement Training & development Tuition assistance Are you ready to join an award-winning team that provides excellent customer service and value? WHO ARE YOU? You are an energetic, well-organized, creative problem solver and goal-oriented team player who loves a challenging and fun environment. You are looking to work hard, earn great money and gain hands-on business experience. You are excited to join a team that strives to leave every customer an enthusiastic advocate of our company. You are committed to reaching your full potential in a supportive learning environment. WHAT WE OFFER? Competitive pay and bonus structure based on specific metrics paid monthly, quarterly Growth and advancePrecision Plumbing
Matthews, NC • (39.4 miles) • Full Time • 10/30/2026
Prefabrication Technician About Precision Plumbing At Precision Plumbing, you are more than just an employee, you are a valued member of a team that is committed to excellence, growth, and supporting one another. We believe in investing in our people by providing opportunities for career and professional development, and hands-on training. As an operating company of Comfort Systems USA, employees have access to industry-leading training and professional development opportunities designed to help them build their skills, advance their careers, and reach their full potential. We also offer an accredited Apprenticeship Program through NCCER to provide a pathway for individuals to develop their trade expertise while earning a paycheck. and collaborating with experienced professionals. WhetherLINET Americas
Charlotte, NC 28270 • (40.4 miles) • Full Time • 10/30/2026
PRODUCTION TECHNIC IAN SUMMARY Under the direction of the Distribution Operations Manager, the Production Technician is responsible for performing installation, troubleshooting, configuration, and repair of both LINET and non-LINET products within the Operations Center. This role conducts inbound and outbound product inspections, assists with order assembly, identifies and secures non-conforming products, and resolves product issues in accordance with established quality standards prior to shipment. The Production Technician also executes product reworks, updates, recalls, and other technical modifications for inventory housed at the Operations Center. Additionally, this position provides training, guidance, and ongoing support to warehouse personnel to ensure tasks are completed accuratelSQA Services
Rock Hill, SC • (43.7 miles) • Part Time • $32.00 to $35.00 / hr • 10/30/2026
Over 30 years, SQA Services has been a trusted provider of managed supplier quality solutions, delivering audits, inspections, engineering support, and corrective actions to manufacturers across aerospace, defense, and other regulated industries. With a global network of experienced quality professionals operating throughout the U.S. and in over 90 countries, SQA supports our clients with speed, technical excellence, and uncompromising quality standards. The inspector will perform advanced visual inspection, dimensional measurement, depth gauge measurement, and Shore A durometer hardness inspection, ensuring all inspection findings conform to engineering drawings, technical specifications, and product definition data. SQA Services is hiring immediately in Rock Hill, SC, Level II CompositesOceanaGold
Kershaw, SC 29067 • (11.5 miles) • Full Time • 10/30/2026
Company Description OceanaGold is a global intermediate gold and copper producer with more than 35 years of exploration, development and operating experience. We have four operating mines – Haile in the USA, Macraes and Waihi in New Zealand, and Didipio in the Philippines and a global workforce of ~5,400 employees and contractors. Our people, assets, and strategy are core to our success. Guided by our values-Care, Respect, Integrity, Performance, and Teamwork-we strive to be a trusted company people want to work for, partner with, supply and invest in, to create value. We are committed to safe and responsible mining that generates strong returns and contributes to sustainable development in the regions where we operate. OceanaGold is listed on the Toronto and New York Stock Exchanges (TSX:Synteen Technical Fabrics, A Maccaferri Company
Fort Lawn, SC 29714 • (32.3 miles) • Full Time • 10/29/2026
Benefits: 401(k) matching Bonus based on performance Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Position Summary: The Production Technician supports the safe, efficient, and reliable operation of production equipment by performing equipment operation, troubleshooting, adjustments, maintenance, repairs, and machine changeovers. This role helps minimize downtime, maintain product quality, meet production goals, and improve equipment performance while following established safety and quality standards. Responsibilities and technical complexity will be based on the employee’s experience, skills, and qualifications. Essential Duties and Responsibilities Operate, monitor, troubleshoot, adjust, and repair production equipmenSoutheastern Tool & Die
Rockingham, NC 28379 • (38.6 miles) • Full Time • $17.00 to $23.00 / hr • 10/29/2026
About Us Locally owned and operated since 1984, we’re a full-service metal fabrication shop proud to stand behind “Manufactured in America.” When you join our team, you’re joining a family that values hard work, takes pride in craftsmanship, and truly cares about its people. What We Offer · Top-tier, low-cost benefits including health, dental, vision, company-paid life insurance, and long-term disability, plus other voluntary packages · 401(k) retirement plan · Paid time off and 7 paid holidays per year · Monday through Thursday schedule - enjoy those 3-day weekends! · Opportunities for growth and skill development · Hands-on experience with state-of-the-art fabrication equipment · Pride in working for a locally owned, American-made company · A workplace that values safety, quality, and teZobility
Monroe, NC 28110-7390 • (28.5 miles) • Full Time • 10/28/2026
Job Description: The Client Aerospace Additive Design and Manufacturing (ADAM) team is seeking a Quality Control Technician for its Monroe, NC facility. In this hands-on inspection role, you will perform visual, mechanical, and coordinate measuring machine (CMM) inspections to verify product conformity to engineering drawings, specifications, customer requirements, and controlled procedures. Will execute dimensional inspections, maintain inspection equipment and calibration records, perform preventive maintenance, and ensure accurate, traceable digital inspection data within applicable MES and QMS systems, directly supporting production readiness, quality compliance, and SPQDC (Safety, People, Quality, Delivery, Cost) performance. Demonstrated CMM operating experience, strong attention toNesco Resource, LLC
Indian Trail, NC 28079 • (36.3 miles) • Full Time • $27.00 to $30.00 / hr • 10/28/2026
CANDIDATE REQUIREMENTS Knowledge Skills & Abilities Possess ability to learn Quality Management System, Document retention system and software Possess working knowledge of inspection tools and standard equipment applicable to the site operations Previous experience in a manufacturing assembly environment, with additional preference to pump manufacturing history[GD3] Ability to read and interpret documents such as department work instructions, blue prints, process code documents, computer software manuals, safety rules, employee handbook and procedure manuals Display ability to write routine reports and correspondence Requires establishing relationships and developed communication skills with internal and/or external contacts and organizations Ability to support production needs and identifECom Solutions Inc
Fort Mill, SC 29707 • (37.5 miles) • Full Time • 10/28/2026
Job Title: Production/Field Technician Location: 10306 Barberville Road-Fort Mill, SC 29707 Duration: 4-6 Months as temp then conversion to perm, if all goes well. Pay Rate: $20 25/hr on W2 (including all benefits) - Depending on Experience Shift: M-F, 7:30am - 4:30pm JOB DESCRIPTION - Production/Field Technician, Fort Mill The Telular business unit would like to source candidates for a Production/Field Technician in the Fort Mill, SC area. The Production/Field Technician is responsible to support the production of SMARTruck fuel delivery data capture systems for customers in the fuel distribution industry. The role also supports a range of production activities, including inventory management, shipping, and receiving. Responsibilities: " Assemble various kits and wire harnesses to supportDP Professionals
Rockingham, NC 28379 • (38.6 miles) • Full Time • 10/28/2026
DPP is seeking a Controls Technician for a direct hire opportunity with our client in Rockingham, NC. Work location : Onsite in Rockingham, NC About the Company The company is a well established, employee owned engineering and automation consulting firm with decades of experience delivering complex industrial solutions. As a 100% employee owned ESOP organization, the company emphasizes long term partnership, technical excellence, and continued investment in its people through professional development and comprehensive benefits. Responsibilities: Programming and Design: Troubleshooting PLC logic, HMI/SCADA interfaces, and reading loop or panel diagrams. Field Support: Performing start-up, calibration, and hardware checks at diverse industrial sites. Focus on PLC/SCADA programming, system trFerretti Search
Matthews, NC 28105 • (39.4 miles) • Full Time • 10/28/2026
The Quality Assurance Analyst will be responsible for ensuring the quality and reliability of the organization’s products, services, or systems by developing and executing test plans, identifying issues, and recommending improvements. This role will collaborate with development, operations, and other cross-functional teams to ensure that standards and requirements are consistently met and that deliverables meet business and customer expectations. Responsibilities: Design and develop robust test suites leveraging object-oriented methodologies. Implement and execute comprehensive test strategies across various platforms and programming languages to enhance overall software quality and test code coverage. Possess mastery of both functional testing and automation techniques. Design and developPaceline Inc
Matthews, NC 28105 • (39.4 miles) • Full Time • 10/28/2026
The Manufacturing Engineer owns the production machinery in the Paceline PVA department. You will run, maintain and improve the equipment that keeps production on schedule, and set the standards others work to. This is a hands-on engineering role with technical leadership responsibility. You will write the work instructions and maintenance plans, lead troubleshooting efforts, and drive continuous improvement across department operations. Key responsibilities Equipment operation and ownership Serve as the technical owner of all Paceline PVA production machinery, ensuring safe, reliable and efficient operation. Set up, run and adjust equipment to meet production schedules, quality specifications and throughput targets. Act as the escalation point for operators and technicians on equipment isCavco Manufacturing LLC
Hamlet, NC 28345 • (42.3 miles) • Full Time • 10/28/2026
ABOUT THE ROLE The Production Team Lead supervises the daily operations in the absence of a manager. They create the shift schedule, assign duties to staff, and readily help out at any work station during their shift. ESSENTIAL DUTIES & RESPONSIBILITIES Assists supervisor in coordinating activities of workers engaged in product assembly, applying knowledge of assembly techniques, specifications, and production scheduling. Discusses with supervisor and checks production schedules, specifications, and priorities to plan departmental work assignments. Designates duties of assembly workers and leads department activities. Revises work assignments as required by priorities and work availability. Explains and demonstrates assembly line procedures and techniques to workers. Interprets specificatiOpenwork, LLC
Norwood, NC • (43.9 miles) • Full Time • 10/28/2026
Openwork is currently assisting a local partner in hiring a dependable and skilled CNC Machine Operator to join their team on 2nd shift. This is a great opportunity for individuals looking to grow their manufacturing career with a reputable company. Job Title: CNC Machine Operator – 2nd Shift Location: Albemarle, North Carolina Pay Rate: $18.00/hour Shift: 2nd Shift | 3:00 PM – 11:30 PM Training: Must be available to train on 1st Shift | 7:00 AM – 3:30 PM for the first few weeks Key Responsibilities: Set up and operate CNC machinery according to specifications Load raw materials and ensure machines are running efficiently Interpret blueprints and technical drawings to produce high-precision parts Perform quality checks using measuring tools (calipers, micrometers, etc.) Troubleshoot and coSMITH TURF & IRRIGATION LLC
Pineville, NC 28134 • (43.7 miles) • Full Time • 10/27/2026
Description: Company Overview Smith Turf & Irrigation is the leading distributor and retailer in the golf, grounds and landscaping industry. We offer a comprehensive selection of equipment, irrigation and landscape products and support our customers with technical expertise and service. Since 1925, Smith Turf has built an unmatched reputation for outstanding customer care, service and support across North and South Carolina, Virginia and Tennessee. STI is a family owned business that believes in working as a team and fosters a family oriented culture. Position Overview Service repair technicians are responsible for the care and maintenance of small engine lawn care equipment. They play a critical role in upholding our reputation for exceeding our customers’ expectations. What You’ll Do · PFox Valley Metrology
Monroe, NC • (28.5 miles) • Full Time • $27.00 to $33.00 / hr • 10/26/2026
Electronics Calibration Technician Candidates must possess bona fide residency and file state taxes in a state where we operate lab sites (WI, MN, MO, IL, OK, NC, OH, TN, ID). We cannot sponsor payroll or establish a tax nexus in other states at this time. Fox Valley Metrology, a leader in ISO/IEC 17025 accredited calibration, serves diverse industries such as Defense, Aerospace, Medical, Semiconductor, and Fortune 500 manufacturers. At Fox Valley Metrology, we recognize that our employees are our greatest assets. We are seeking a skilled Electronics Calibration Technician to join our team. This position is a traveling role, servicing our customers at their facilities. Our culture values teamwork, quality, innovation, dynamic engagement, and opportunities for growth. We'd love to hear fromThe Cole Family Of Harley-Davidson Dealerships
Florence, SC • (44.9 miles) • Full Time • 10/25/2026
Service Technician Location: Harley-Davidson – Florence, SC Come to Sunny South Carolina and make more money! We have great wages, low cost of living and a riding season that is 12 months long, so no more slow winters and layoffs. It's the real America, land of shotguns, BBQ and pick up trucks. We are a big brand new store right on the busiest interstate on the East coast, right on the exit to Myrtle Beach. We have grown by leaps and bounds with no signs of stopping, so come to the winning team. We are a high performing team that believes that quality work is how you build our reputation and have lasting customer relationships. We do a ton of performance work and have a dyno that can even do trikes. We are not trying to hire for a short time, but hire and train for a lifetime. Join our teaPrimo Brands
McBee, SC 29101 • (12.3 miles) • Full Time • 11/20/2026
Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets Salary Range: $92,338-$98,992 Shift: Monday-Friday Night Shift Bonus Eligible: Yes Location: McBee, SC Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic