We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Responsibilities:• Under limited supervision, provides technical support for validation and maintenance of production equipment, utilities and systems• Monitors quality and system standards to ensure reliability and compliance with company standards and governmental regulatory requirements• Verifies calibration, maintenance and repair of the instruments• Assists with documentation for validation procedures and technical reports related to systems, products and/or processesQualifications:• High School Diploma or equivalent vocational or technical training• 1-2 years' relevant experience• Pharmaceutical/biotech industry experience preferredDifferent qualifications or responsibilities may apply based on local legal and/or educational requirements. Refer to local job documentation where applicable.Our BenefitsCSL offers the following benefits for this full-time position: Options for health care benefits, including choices of plans for medical, dental, and vision, prescription drug coverage; Company-provided basic life insurance and Short- and Long-Term Disability; the option to participate in CSL’s 401(k) Savings Program; Paid Time Off (PTO) for use in connection with vacations, illness, and other personal business; and paid observed holidays as designated by the Company. For more information on CSL Plasma benefits visit https://cslbenefits.com/cslp.About CSLPlasmaCSL Plasma is one of the world's largest collectors of human plasma. Our work helps to ensure that people with rare and serious diseases are able to live normal, healthy lives. We are committed to our work because lives depend on us. Learn more about CSL Plasma.We want CSL to reflect the world around usAs a global organization with employees in 35+ countries, CSL embraces diversity and inclusion. Learn more about Diversity & Inclusion at CSL.Do work that matters at CSL Plasma!

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – ArdenDiscount Tire54 Airport RdArden, NC 28704OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr6

***** This posting is part of our ongoing effort to identify qualified candidates for future opportunities. While we may not be hiring immediately, we encourage you to submit your application for consideration when a position becomes available. *****Welcome to Mobile Auto Solutions (MAS)!MAS is seeking skilledAutomotive ADAS Technicians to join our growing team! Our technicians are the face of the company. This role comprises customer interaction, vehicle testing and repair, invoice generation, inventory control and service vehicle maintenance. Don’t miss out on an opportunity to grow with us!Salary: $60,000 - $95,000 a year, Depending on experience.Schedule: Full-Time Monday to Friday 8-5 pmWhy choose to work at MAS Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance effective your first day401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysPet insuranceContinuing Education OpportunitiesOpportunities for advancementResponsibilities include but are not limited to:Determines testing and analysis by communicating with shop representatives and reviews all estimates for repairPerforms diagnostic testing, programming, ADAS calibrations and analysisPerforms wiring repairsAdvises shop of needed repairsKeeps inventory of stock, communicating with support staff for needed orders and verifying order receiptsWrites, prints and emails service invoicesCollects signature or payment for work performedDelivers completed invoices and payments to office in orderly manorKeeps shop equipment operating by following operating instructions, troubleshoots breakdowns; maintains supplies; performs preventative maintenance; advises management of repairs; keeps Google Drive up to dateCollaborates with teammates according to PPT guidelines to schedule/complete jobsOther duties as assignedQualifications include but are not limited to:Knowledge of OE scan toolsAbility to learn new tools as neededKnowledge of wiring repair proceduresAbility to service A/C systemsPossesses diagnostic skills in the automotive tradeBasic computer knowledge including using email, spreadsheet and messaging systemsWilling and able to update job knowledge by participating in educational opportunities, reading technical publications and the likeMust possess high school degree or GED equivalent4-10 years related service technician experience requiredMAS is proud to be an equal-opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.The physical demands of your job must be met to perform the job's essential functions successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $95,000 / Yearly

Build your best future with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future!Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive base salary and a comprehensive bonus program.Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year.Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyProviding Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot)Check us out! A Day in the Life at JCIYou Owe It to Yourself to Experience why JCI keeps being voted the Best Place to Work!

DescriptionELECTRICIANThis role offers a challenging, diverse and exciting opportunity to become part of our Maintenance team. In general, all Electrician roles are required to repair, install, replace, program, and test all electrical circuits, and equipment. Periodically perform or assist others in routine to moderately complex repairs or installation of automatic electrical and electronic controls.What you will do:Perform routine electrical/electronic preventative maintenance on mill equipment.Responsible for the repair, modification, and maintenance of a variety of electrical and electronic equipmentPerform tasks like wiring circuits, replacing components, and repairing electronic devices.Performs test reading using several different instruments, including multi-meter and Megger.Remain current in technical changes or equipment designs by attending classes as needed.Work rotating shifts, which includes nights, holidays, weekends, and overtime as scheduled or required.Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training.Other duties as assigned.What you will need:High School Diploma or GEDBasic reading, writing, and arithmetic skillsBackground in Electrical fundamentalsMust have knowledge in 3 phase and single-phase power distribution systems, motor controls, wiring, and troubleshooting of such systems.Experience with 480-volt power and logic circuitsStrong computer, math, analytical, and planning skillsMust be able to understand and follow electrical schematics proficiently without supervisionMust be samiliar with machine control systemsAbility to troubleshoot (complex) machine control systems.Ability to identify the features and functions of controllers.Ability to describe and compare pneumatic and electronic controllers.Ability to identify the signal path through a control circuit.A combination of higher education and experience will be taken into consideration.Eligible to legally work in the United States without employer sponsorship.Willing and able to work a schedule which will include nights, weekends, and holidays.Willing and able to work on an emergency call-in basis when required.Ability to work as part of a team and deliver value to the team.Willingness and ability to cross-train to learn new jobs and skills.Consistent, predictable attendanceWhat will make you stand out:VFD drives experiencePLC ExperienceAble to interpret PLC logic as it relates to its application to process and equipment for troubleshooting purposes Our highly competitive compensation package and outstanding benefits include:Benefits starting Day 1Competitive starting payOn-the-job training andA culture that strongly believes in promoting from withinMedicalDentalVision401k with company matchLife InsuranceDisability InsurancePaid vacations and holidaysSafety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities.Apply:If you are ready to build your career in a company that thrives on growth, internal promotions, training, safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: www.westfraser.com/jobsWe thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please.West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company.West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $150,000 /yr.

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$20- $2

Overview: Tire Technician – Part-Time – Woodruff RdDiscount Tire1408 Woodruff RdGreenville, SC 29607OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $15Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #powerhr12

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – South BlvdDiscount Tire9440 South BlvdCharlotte, NC 28273OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Starting at $14Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Work Location Type:OnsiteAs a leading industrial distributor with operations primarily in North America, Japan and the United Kingdom, We Keep The World Working® by serving more than 4.5 million customers worldwide with products delivered through innovative technology and deep customer relationships. With 2023 sales of $16.5 billion, we’re dedicated to providing value for customers, fostering an engaging culture for team members and driving strong financial results.Our welcoming workplace enables you to learn, grow and make a difference by keeping businesses running and their people safe. As a 2024 Glassdoor Best Place to Work and a Great Place to Work-Certified company, we’re looking for passionate people to join our team as we continue leading the industry over our next 100 years.Primary Function:This positions primary responsibility is to maintain all conveyor and building systems in order to support the goals of the DC. Provide technical expertise for day to day issues and provide solutions for recurring problems. A thorough understanding of mechanical, electrical, basic power distribution/controls, conveyor systems, powered industrial equipment (PIE) and building assets/components is required to provide maximum system uptime. The job scope includes recommending changes to and executing preventative maintenance programs and repairs to automated sorting equipment, Dematic Multi-Shuttle, Cross belt Sorter, associated conveyors, material handling equipment, building envelope and building MEP (mechanical/electrical/plumbing) systems. This position will be responsible for properly completing work requests as well as projects. Principal Duties & Responsibilities:Respond to all system issues involving conveyors, PIE, sortation and controls (EMS, WCS, Sort Director, EWM, Hardware, Software, etc.) Assists with any infrastructure upgrades along with modifications/repairs to DC assets.Basic troubleshooting/diagnostics and repair of mechanical, electrical, pneumatic, hydraulic and control system components of the conveyor system and building components, including but not limited to: PLCs DC drivesAC invertorsLinear motorsPrint and applyVFDsEncodersScannersPower distributionCommunication systemsAbility to work independently on projects and work assignments.Work with contractors, service providers and other maintenance personnel. Ability to operate all material handling and mobile equipment within the Distribution Center.Perform work requests and projects as assigned.Easily adjusts to changes in priorities, and flexible to respond to on-call emergencies. Ability to work at heights and in unusual positions.Ability to grasp, bend and lift up to 75 pounds on a regular basis.Works in cross-functional teams and work groups to identify and resolve problems by proposing unique and innovative solutions.Keeps team lead, and technicians informed of progress on assignments, projects and repair functions.Must be available for 24-hour on-call rotation.Utilize CMMS to enter daily Maintenance ActivitiesEducation & Experience:High school diploma or equivalent required. This Position should require a degree.Minimum of 5 years of building and equipment maintenance experience with two years maintaining Dematic or similar type conveyor systems.Computer literate – specifically using the MS Outlook and other Microsoft products.Knowledge and application of safe work practices, LOTO standards and NFPA70 E Arc Flash. Demonstrated ability to follow directions with acute attention to detail and high level of record keeping accuracy.Demonstrated skills to operate troubleshoot and resolve problems associated with computer controlled building systems, conveyor systems, and maintenance management systems (CMMS) in a time sensitive environment. Skilled at using electrical test equipment, hand tools, power tools, calipers, gauges, etc.Experienced with reading and interpreting MEP (Mechanical/Electrical/Plumbing) drawings and schematics.High level of knowledge and understanding of codes such as the NEC, BOCA and/or UBC, MSDS and OSHA.Possesses an excellent attendance record; is flexible with work schedule.Qualifications Possess strong technical skills to become subject matter expert for conveyors, crossbelt system, Dematic Multi-Shuttle System/Goods to Person System. Design, implement, and document PLC (Siemens, Allen Bradley) programming changes to automated equipment when authorized.Strong understanding of power distribution, power generation, and control circuits.Troubleshoot, and implement changes to I/O device networks such as Profibus, Data Highway, and CanBus.Demonstrated ability to utilize computers/computer-based monitoring equipment to diagnose material handling systems and building automation systems. Experience with thermal imaging equipment to detect early failure(s) of both mechanical and electrical equipment.Experienced with AC / DC drives (set-up, programming, faults).Thrive in a continuous learning environment, attend on going training, and possess the initiative to learn and understand all facets of system operation and use.Interact with manufacturers, vendors, and operations to remedy concerns, offer solutions, or implement modifications.Ability to gain further education in one or more of the following areas: Electrical controls, PLC troubleshooting, PIE, building management and various other systems. Successful completion of Maintenance skills evaluation. Work Environment:Must be able to tolerate an environment with exposure to heat, cold, noise, dust and work aroundmoving equipment – often times while working in uncomfortable positions at an elevated height.This position reports directly to the Facility Supervisor or Manager and takes direction from Maintenance Team Lead. Also has regular interaction with distribution center associates, managers, other Grainger employees, vendors, contractors and service providers. Impact: The Maintenance Technician is responsible and accountable for the effective and efficient operations of the building and equipment at each Distribution Center, contributing to the maximization of equipment uptime. The position is also responsible for maintaining a safe work environment for the DC workforce.We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace.We are committed to fostering an inclusive, accessible environment that includes both providing reasonable accommodations to individuals with disabilities during the application and hiring process as well as throughout the course of one’s employment. With this in mind, should you need a reasonable accommodation during the application and selection process, please advise us so that we can provide appropriate assistance.