Please Accept our Privacy Policy
Motor Controls Inc.
Dallas, TX 75220 • (44.2 miles) • Full Time • $22.00 to $30.00 / hr • 8/24/2026
The Control Panel Wiring Tech installs, routes, terminates, labels and verifies wiring in low-voltage control panels using electrical schematics, wiring diagrams, panel layouts, bills of material, and other engineering documents. This is a hands-on manufacturing position for an experienced professional who can confidently read electrical schematics, work independently with limited supervision, and produce clean, accurate, high-quality wiring ready for testing and shipment. Available Shifts: 6:00am - 2:30pm, M - F 3:00pm - 11:30pm, M - F Job Duties Include: Read and interpret electrical schematics, wiring diagrams, panel layouts and bills of material before and during assembly. Assemble, wire, label, and test low-voltage control panels according to engineering documentation and inter
Texas Maintenance Solutions
Fort Worth, TX • (16.2 miles) • Full Time • 9/12/2026
The Service Electrician is responsible for the installation, maintenance, and repair of electrical systems across multiple sites. This role requires independent work, frequent local travel, and consistent adherence to safety protocols. The Service Electrician will report directly to the Electrical Supervisor and utilize standard electrical tools alongside diagnostic software and safety equipment to ensure efficient and safe operations.ResponsibilitiesInstall, maintain, and repair electrical wiring and systemsTroubleshoot electrical issues using diagnostic software and instrumentsPerform safety inspections and comply with electrical safety standardsInteract professionally with customers during service callsTest equipment and document maintenance and repair workRespond promptly to electricalPLS
Hurst, TX • (26.5 miles) • Full Time • 9/12/2026
We are seeking Apprentice and Journeyman Plumbers for commercial construction projects throughout the Dallas–Fort Worth area.Candidates must have experience working on commercial construction projects and be able to work safely and efficiently in active construction environments.Responsibilities:Install, maintain, and repair commercial plumbing systemsRead and interpret blueprints and construction drawingsInstall underground, rough-in, top-out, and finish plumbing systemsMeasure, cut, assemble, and install piping and fixturesWork with PVC, cast iron, copper, and other plumbing materialsFollow project schedules and site safety requirementsMaintain tools and clean work areasRequirements:Apprentice PlumbersValid Texas Apprentice Plumber LicenseCommercial plumbing construction experience prefeOne Hour Heating And Air Conditioning
Justin, TX 76247 • (31.9 miles) • Full Time • 9/12/2026
Position Type: Full-timeCompensation: Competitive hourly pay based on experience, certifications, and performance; local market data for Justin, TX supports strong earning potential for experienced HVAC technicians.We are looking for a dependable, skilled HVAC Service Technician to join our growing team in Justin, TX. The ideal candidate takes pride in quality workmanship, communicates clearly with customers, and can diagnose, repair, maintain, and install residential HVAC systems with professionalism and care.ResponsibilitiesDiagnose, repair, service, and maintain residential heating and cooling systems.Perform preventative maintenance, system inspections, tune-ups, and safety checks.Communicate findings, repair options, and recommendations clearly to customers.Complete work orders, serviMD Roofing LLC
Cedar Hill, TX 75104 • (38.1 miles) • Full Time • 9/12/2026
Roofing Sales RepresentativeMD Roofing LLC is looking for a motivated and dependable Roofing Sales Representative to join our team. We are looking for someone who enjoys working with people, is willing to get out in the field, and is motivated to build their own pipelineWhat We Offer: - 30% commission on completed/installed jobs - Bonuses for signed contracts - Company-provided leads - Flexible schedule - Strong earning potential - Comprehensive training and support - Residential and commercial roofing opportunitiesResponsibilities: - Follow up with company-provided leads and generate new business through door-to-door prospecting, networking, and referrals. - Perform roof inspections to identify potential storm damage and roofing needs. - Meet with homeowners to explain the roofing and insW3Global Inc.
Irving, TX • (38.6 miles) • Full Time • 9/12/2026
Company Description:We are a well-established North Texas underground utility contractor located by DFW Airport specializing in commercial and public works infrastructure projects in the DFW Metroplex. Founded in 1999, we offer competitive compensation in a stable work environment and offer opportunities for advancement. We are financially secure and debt free.Job Description:Qualified candidate should meet the following criteria:Experience in commercial construction, specifically with a background in estimating storm, water and sewer utilities.Knowledge of various online bidding platforms including IsqFt, Building Connected, Procore, SmartBid and others is highly valuedProficiency in PlanSwift, Microsoft Project and HCSS Heavy Bid is preferred, as these tools are integral for accurate estPerry Homes, LLC
Midlothian, TX 76065 • (39.3 miles) • Full Time • 9/12/2026
Acquire and apply the appropriate knowledge of Perry Homes construction procedures regarding the Phase II process (from sheetrock tape and float to home completion) and perform warranty service according to Company procedures.Responsibilities• Coordinate the various independent contractors over multiple jobsites• Order construction materials• Monitor the quantity and quality of construction materials and completed tasks• Ensure standards of quality as set forth by Perry Homes• Factors critical to success include management of time under construction, construction supervision, direct overhead costs, budget variances, and change orders • Perform other tasks as assigned by the Project Manager, Vice President of Construction, or Division President Job CompetenciesProject ManagementCustomer/CliClearly Perfect Pools, Inc.
Midlothian, TX 76065 • (39.3 miles) • Full Time • 9/12/2026
Company Overview:We are a growing pool service company dedicated to keeping residential pools sparkling clean and safe. If you enjoy working outdoors, being hands-on, and having a flexible schedule, this could be the perfect fit for you.Job Description:We are looking for motivated Pool Cleaning & Maintenance Technicians to join our team. In this role, you’ll travel to customer locations to provide professional pool cleaning, chemical balancing, and basic equipment checks. No two days are the same, and you’ll get to work independently while building lasting customer relationships.Key Responsibilities:Clean, skim, brush, and vacuum residential poolsTest and balance pool chemicals for safe water qualityInspect pool systems (pumps, filters, heaters) and report issuesProvide excellent customerTrinity Valley Plumbing Services LLC
Dallas, TX 75234 • (44.5 miles) • Full Time • 9/12/2026
Trinity Valley Plumbing Services is seeking a skilled and licensed Journeyman Plumber to join our growing team. If you have a strong background in plumbing, excellent problem-solving skills, and a commitment to delivering exceptional service, our team is eager to meet with you. Willingness to travel 2 weeks per month with travel costs and per diem paid by the Company. ***Out of State Travel Opportunities for Commercial Accounts******Multifamily Service Experience Desired***Responsibilities:Perform commercial and residential plumbing installations, repairs, and maintenance.Identify plumbing issues and bring thoughtful solutions to our client’s needs.Collaborate with team members to complete projects efficiently.Provide excellent customer service and maintain professional relationships withNew York Pizza Pasta LLC
Fort Worth, TX • (16.2 miles) • Full Time • 9/12/2026
We are seeking a Kitchen Manager/ Kitchen Cook to join ourteam!You willdirectly supervise and coordinate activities of workers engaged in preparing and serving food.Responsibilities:Oversee the daily operation of food service staffMonitor quality of products andservices producedAdjust daily schedule for shift personnel toensure optimalefficiencyManage inventory of ingredients and suppliesMaintain health standards for raw and finished productsQualifications:Previous experience in food service or other related fieldsKnowledge of common food safety practicesStrong leadership qualitiesAbility to thrive in a fast-paced environmentExcellent written and communication skillsAlways There Personnel
Fort Worth, TX • (16.2 miles) • Full Time • 9/12/2026
Job Title:Forklift Operator (Sit-Down Double forks and Reach Truck)Location: Fort Worth / Everman, TX 76140Job Type: Full-Time | Multiple Shifts AvailableStart Date:Projected first week of MarchJob OverviewWe are currently hiring experienced Forklift Operators to join our team in the Fort Worth/Everman area. We are preparing for multiple openings and beginning interviews immediately. This is a great opportunity for dependable operators seeking stable, full-time work with consistent scheduling.Available Shift:DayDay Shift A: $18.00/hr. | 6 AM – 6 PM (Sunday-Wednesday, on Wednesday from 6am - noon)Day Shift B: $18.00/18.50 hr 6am-6pm (Weds -Saturday)Night Shift C: $18.50/hr. | 6 PM – 6 AM (Sunday-Wednesday, on Wednesday from 6pm - midnight)NightShift D: $18.50/hr. | 6 PM – 6 AM (Wednesday-SaButler America Aerospace
Fort Worth, TX • (16.2 miles) • Full Time • 9/12/2026
Electronic Design EngineerLocation: Fort Worth, TXJob ID: #73171Pay Range: $43-60 an hour 12 month contract Job Summary: - Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft - Apply electrical engineering theory and the operation of electronic test equipment to test and troubleshoot avionics / electrical modules or systems - Model and simulate electronic circuits using SPICE software - Design printed circuit board layouts using Altium design software - Modify and maintain programmable logic designs in FPGAs and CPLDs - Prepare engineering certification reports to document system designs that meet the requirements of certification authorities - Prepare functional test documents to verify proper operatioHayes & Stolz Industrial Manufacturing Co.
Burleson, TX • (20.2 miles) • Full Time • 9/12/2026
Job SummaryPosition reports to Welding Supervisor and is subordinate to the team leader.Areas of responsibility include final welding for sub-components.Duties may include welding outside of designated weld area to meet equipment needs.Duties may include assembly or subassembly of product when required for proper final welding.Job Duties? Final welding of sub-components.• Complete final welding activities of sub-components following requirements for welding techniques (critical/structural welds, continuous welds, skip welds, etc.)• Consult with Team Leader on nontraditional fabrication requirements and fixtures.? Work with Team Leader and Team Members to meet job requirements, quality standards and schedule dates.• Ensure that sub-components are properly welded with quality welds.• IdentifInnovative Automotive
Haltom City, TX • (21.2 miles) • Full Time • 9/12/2026
TECHNICIAN WILL VERIFY/DUPLICATE CUSTOMER CONCERN, MAKE SUGGESTIONS/RECOMMENDATIONS FOR REPAIR, PERFORM REPAIR, VERIFY REPAIR IS COMPLETE, CLEAN WORK SPACE.EXPERIENCE IS A PLUS BUT NOT A MUSTMUST HAVE AND SUPPLY YOUR OWN TOOLSSOME SPECIALTY TOOLS I.E. SCANNER, REFRIGERANT MACHINE, ALIGNMENT MACHINE, ETC SUPPLIED BY SHOPEngineered Wall Systems Texas, Inc.
North Richland Hills, TX • (25.3 miles) • Full Time • 9/12/2026
Location: Texas and Surrounding StatesCompany: EWS Texas, Inc.About Us: EWS is a leading commercial contractor specializing in the fabrication and installation of metal wall panels, metal roofs, louvers, sun screens, glass and glazing, and associated support systems. We are committed to delivering top-notch quality and innovative solutions, and we value employees who demonstrate dedication and hard work.Position Overview: We are seeking experienced Foremen to join our team. The ideal candidates will have at least 5 years of foreman experience in the construction industry, specifically in metal fabrication and installation. This role involves overseeing projects, managing teams, and ensuring that work meets high standards of quality and efficiency.Key Responsibilities:Lead and manage projecAerotek
Arlington, TX 76001 • (26.7 miles) • Full Time • 9/12/2026
Forklift Operator3rd Shift $21hr Job DescriptionThis role involves operating sit-down, stand-up reach, and cherry picker forklifts in a high-volume distribution environment. You will handle materials throughout the facility, including consistent lifting of up to 50 pounds, palletizing products, and performing case selection and order picking throughout the shift.ResponsibilitiesOperate sit-down forklifts, stand-up reach trucks, and cherry picker forklifts safely and efficiently throughout the shift.Perform palletizing and case selecting tasks continuously to support production and distribution schedules.Handle material movement, including loading and unloading trailers and trucks using forklifts and pallet jacks.Support shipping and receiving activities, including verifying, loading, and uArlington Independent School District
Arlington, TX • (28 miles) • Full Time • 9/12/2026
ROLE AND PURPOSE: Maintain, repair, parts ordering utilizing AISD procedures for purchasing and schedule PM on Tractors, mowers, line trimmers, chain and pole saws, edgers and other small engine repairs as designated by the supervisor.QUALIFICATIONS: Education/Certification:High School Diploma/GED from an accredited institution, required.Ability to read and understand verbal instructions in EnglishValid TX driver's license Class C required (Class B preferred)Specialized courses in diesel engines (college or vocational) preferred Experience: Working knowledge of and ability to operate all power equipment, vehicles, tractors and attachments associated with departmentFour years of experience in grounds and exterior facilities maintenanceSPECIAL KNOWLEDGE/SKILLS:Ability to assist in instructinVenus Construction Company
Mansfield, TX • (29.6 miles) • Full Time • 9/12/2026
Summary/Objective:The Field Safety Manager is responsible for leading and enforcing safety programs across active construction projects. This role works directly in the field with crews, supervisors, and project superintendents to ensure compliance with company policies, OSHA regulations, and client safety requirements. The Field Safety Manager serves as a key resource for hazard identification, incident prevention, training, and continuous improvement of safety culture, with the ability to effectively communicate in both English and Spanish.Essential Functions:Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.· Monitor, and enforce company safety policies and procedures across all job sites· Maintain an active field presenceTitan Properties LLC
Colleyville, TX 76034 • (29.8 miles) • Full Time • 9/12/2026
The Residential Pool Maintenance manages a swimming pool route that includes cleaning of swimming pools each week and report system issues to office.Tasks include:Managing truck inventory of equipmentProperly adjust the water chemistry for each pool weeklyBrushing, Vacuuming, netting, etcUtilize Software system on mobile platform.Purpose:Maintenance Technicians are responsible for the weekly service of customers’ pools and identification of any pool related issuesEssential Functions:Provide weekly customer maintenance and cleaning of customers’ poolsIdentify any issues with equipment and report to the proper personnelCommunicate the status of the pool with the homeownerEnsure all activities are performed in a safe mannerRequired:A valid driver’s license with a clean driving recordThe abiliDiversified Sourcing Solutions
Midlothian, TX • (39.3 miles) • Full Time • 9/12/2026
Diversified is seeking Machine Operators for a manufacturing company in Midlothian, TX. Climate controlled, Room for Growth! Pay: $18.50-19.00/hr Hours: 5AM- 3:30PM M-TH Overtime as needed Fri and Sat Climate Controlled environmentTemp to Perm Responsible for the set-up and operation of processing equipment. The utility Operator will be required to operate all equipment within the department and will train Process Operators on the equipment and processes. ESSENTIAL DUTIES AND RESPONSIBILITIES: Follow all safety policies and strive to improve our safety culture by identifying, reporting, and correcting unsafe conditions in the workplace. Follows all GMPs and food safety policies to protect our brand. Maintains a clean and organized work area. Set-up, operate, adjust, troubleshoot, diagnoseMarten Transport
DeSoto, TX • (43.8 miles) • Full Time • 9/12/2026
PURPOSE: The Safety Lane Inspector furnishes quality inspections to the tractor and trailer fleet in a timely and efficient manner, while complying with Marten policy and procedure as well as DOT regulations.RESPONSIBILITIES:1. Ability to identify D.O.T. issues on any/all equipment Marten operates.2. Ensure C.S.A. violations are identified and repaired prior to equipment leaving facility.3. Clear and concise understanding of the fleets equipment and how to properly maintain the company standard.4. Capture and inspect all equipment at respective terminals during yard checks and monitoring.5. Ensure all company, EPA and Safety policies are compiled to meet local, state and federal standards. 6. Accountable for all direct and indirect labor hours on a daily and weekly basis. 7. Completes allMarten Transport, Ltd.
DeSoto, TX • (43.8 miles) • Full Time • 9/12/2026
PURPOSE: The Safety Lane Inspector furnishes quality inspections to the tractor and trailer fleet in a timely and efficient manner, while complying with Marten policy and procedure as well as DOT regulations.RESPONSIBILITIES:1. Ability to identify D.O.T. issues on any/all equipment Marten operates.2. Ensure C.S.A. violations are identified and repaired prior to equipment leaving facility.3. Clear and concise understanding of the fleets equipment and how to properly maintain the company standard.4. Capture and inspect all equipment at respective terminals during yard checks and monitoring.5. Ensure all company, EPA and Safety policies are compiled to meet local, state and federal standards. 6. Accountable for all direct and indirect labor hours on a daily and weekly basis. 7. Completes allTRC Talent Solutions
Denton, TX • (44.9 miles) • Full Time • 9/12/2026
Client OverviewOur client is a leading construction services organization supporting complex, mission-critical construction projects. They are committed to delivering high-quality project execution through collaboration, innovation, and industry-leading scheduling practices. The team works closely with owners, design partners, contractors, and project stakeholders to ensure successful project delivery.OverviewThe Scheduling Manager is responsible for developing, maintaining, and analyzing project schedules throughout the entire project lifecycle. This role partners closely with Project Managers, Superintendents, contractors, and stakeholders to provide schedule visibility, identify risks, support recovery planning, and ensure projects remain on track. The ideal candidate will bring strongSQA Services
Denton, TX • (44.9 miles) • Full Time • 9/12/2026
For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors We are seeking a skilled and detail-oriented Cable & Harness Inspector to support our team in Denton, TX. This is a fuMid-Continental Restoration
Fort Worth, TX • (16.2 miles) • Full Time • 9/12/2026
Job SummarySkillfully and safely performs work scopes required in the specialty trade of exterior building repair and concrete restoration.Travels throughout territory to assigned projectsMaintains own supply of hand tools associated with the tradeOperates variety of power tools including high speed grinders and impact hammersUnderstands and follows MCR and OSHA safety policies and applicable lawsAchieves production rates and quality standards as set forth by the industry and MCRWorks high above the ground from a variety of scaffolding, lifts and rooftopsCompetent in the erection and rigging of scaffolding and staging equipmentUses measuring tape accurately to the nearest fraction of an inchPossesses knowledge of acids, detergents and other trade related chemicalsJob RequirementsJourneymanNextStep Recruiting
Haslet, TX 76052 • (23.7 miles) • Full Time • 9/12/2026
Project & Bid Manager to lead new business opportunities and support growth with existing customers.What You’ll DoLead quotation and bid processes, including cost assumptions, investment estimates, technical assessments, and P&L-ready inputsManage new business projects from inquiry through startup, including layouts, process flows, budgets, timelines, risk assessments, and customer reviewsCoordinate cross-functional inputs from Procurement, R&D, Planning, Operations, and other teams to develop customer proposals and support successful launchesMonitor market trends, support account growth, lead stakeholder communication, and help achieve annual growth and pricing objectivesWhat You Bring5+ years of experience in contract manufacturing and/or contract packaging5+ years of experience in CPG/FHash Kitchen LLC
Fort Worth, TX 76177 • (25.7 miles) • Full Time • 9/12/2026
Kitchen ManagerCompensation:$65,000–$75,000 base salary depending on experience, plus bonus potential up to $6,500, along with generous perks and benefits.A kitchen that closes before dinner starts.No closing shifts, no dinner rush, no midnight breakdown, no Saturday night double. Imagine being home before the dinner rush starts and getting back the time with your friends and family that restaurants usually take. As a Kitchen Manager for Hash Kitchen, you will run the back of house operations in a High-Volume restaurant, scratch cooking, breakfast through lunch. Be home for dinner with your family instead of cooking someone else’s.Why our Kitchen Managers stayEvery night off we're a breakfast & lunch concept, so your evenings are yoursEvery night off. Your last ticket is in the window by mSFI
Fort Worth, TX 76177 • (25.7 miles) • Full Time • 9/12/2026
Forklift OperatorWe are currently hiring Forklift Operators and Warehouse associates in the Fort Worth, TX area. We have several opportunities available due to our growing needs! We are specifically looking for entry-level candidates who are interested in a long-term career with opportunities for growth, development, and advancement. If you’re interested in such an opportunity, this position could be the right fit for you.Forklift Operator Pay Rate:starting pay is $21.00Forklift Operator Shifts:Monday - Friday2nd Shift- 11:00am-7:00pmForklift Operator Job Description:Process and distribute items into boxes and load them onto pallets.Process and distribute requisitions, work orders, and requests for materials.Sort and stock materials or items on racks, shelves, or bins.Operate a variety ofComfort Technologies
Mansfield, TX 76063 • (28.4 miles) • Full Time • 9/12/2026
Commercial HVAC Service TechnicianLocation: DFW Metroplex (Dallas-Fort Worth, TX)Compensation: $35-$50+/hour DOEJob Type: Full-TimeJoin a Growing Commercial HVAC TeamComfort Technologies is seeking experienced Commercial HVAC Service Technicians to join our team serving customers throughout the DFW Metroplex. We are looking for seasoned technicians with strong troubleshooting and repair experience on commercial HVAC systems, RTUs, chillers, and related equipment.If you're looking for a company that offers steady work, take-home vehicles, overtime opportunities, and the ability to work on a wide variety of commercial equipment, we'd like to talk with you.What We OfferCompetitive pay ranging from $35-$50+/hour based on experienceTake-home company vehicle (Chevy Express van)40+ hours per weekAnistar
Arlington, TX 76011 • (30.8 miles) • Full Time • 9/12/2026
Title:DAS TechnicianLocation: Dallas, TXPay Rate: $20-30.00/HRCompany Summary:Our client is a proven leader in the communications industry, offering a professional level of cabling expertise to their partners. Having been around for over twentyyears, our client provides the resources necessary for their team members to excel and reach their career goals in the communications industry.Position Summary:Anistar is seeking DAS Technicians for a contract opportunity.Responsibilities:Installation of DAS systemsExperience with Indoor/Outdoor SystemsImplement CAS and IBWaveLacing and cable managementFiber installation (Splice and Test a plus)Coaxial terminationGenerate closeout packetsDomestic travel requiredExperience:Previous DAS install & testing experienceAbout UsAt Anistar Technologies, we coMSF Electric Inc.
Arlington, TX 76011 • (30.8 miles) • Full Time • 9/12/2026
Single-Family Residential Electrician Supervisor / Wireman needed!This is a full-time position offering leadership abilities and technical expertise. If you take pride in flawless residential craftsmanship and enjoy mentoring a team, we want to hear from you.Job OverviewWe are seeking a highly skilled Wireman / Journeyman Electrician with 6+ years of experience to lead our field teams. This role focuses entirely on single-family residential properties, splitting your time between supervising crews on high-end custom home builds and performing residential service work as needed.Why Work For Us?A lot of room to grow and advance with the companyEventually become a supervisor /superintendent down the roadWe are a merit-based companyBonuses for supervisorsQualifications & RequirementsExperienceStorm Force Roofing + Construction
Southlake, TX 76092 • (32 miles) • Full Time • 9/12/2026
Job descriptionFull-Time / Part-Time | Commission sales role with weekly bonus earning ranging from $50,000–$150,000+ per year | Uncapped CommissionThe GigReady to trade the cubicle for the great outdoors? We're looking for driven, personable go-getters to join our roofing sales team. No roofing or sales background needed we'll teach you everything from spotting a bad shingle to closing the deal. Bring the hustle and the people skills; we'll bring the training, the tools, and a team that's got your back.What You'll Do• Inspect roofs and give homeowners a straight answer on what's really going on up there• Turn those findings into clear, accurate estimates and proposals• Build real relationships with homeowners and property managers then close the deal• Keep your pipeline warm with consisteRegent Reconstruction Inc
Lewisville, TX 75057 • (43.9 miles) • Full Time • 9/11/2026
Job Title: Water Mitigation Lead TechnicianDepartment: Water RestorationReports To: Mitigation SupervisorLocation: Lewisville, TexasEmployment Type: Full-time (40+ hours with overtime as needed)About Company:Regent Restoration excels at removing damaging elements from your home and restoring it to excellent condition. Whether it’s a flood or a leaking appliance, our expert technicians respond quickly to remove water before it causes further damage. We assess the situation, and make repairs through our water restoration services in Dallas–Fort Worth, TX and we’re available 24/7. Disasters don’t wait for business hoursand neither do we. As a full-service restoration company, we offer end-to-end solutions for water, fire, and storm damage across North Texasfrom flash floods to hail storms. WeVolt
Crowley, TX 76036 • (14.1 miles) • Full Time • 9/11/2026
Build your future with VoltVolt is immediately hiringProduction WorkersinFort Worth, TX.Entry LevelWeekly PayAs aProduction Workeryou will:Operate equipment necessary to manufacture customer products.Equipment can include saws, nail guns, staplers, hammer, band cutters, bander, pallet jack, and tape measureRegular and reliable attendanceMonitor quality of product being produced and notifies the lead or supervisor of any issuesComplete production paperwork as required, accurately, and completelyMaintains a safe and clean working environment by complying with verbal and written procedures, rules, and regulations throughout shiftFill out your productivity sheet and shipping tag legiblyThis is afull-time, temp to hireopportunity.The idealProduction Workercandidate will have:Knowledge of hand tACS Commercial Services, LLC
Fort Worth, TX • (16.2 miles) • Full Time • 9/11/2026
TECHNICIANHandyman - Commercial – (General Carpentry, Electrical, Plumbing)Company Provided Vehicle & PhoneJOB DESCRIPTIONThe Facility Maintenance Technician position is responsible for performing diversified duties to install, troubleshoot, repair, and maintain facilities according to safety, predictive, and productive maintenance systems and processes to support the achievement of the customer’s business goals and objectives. We are looking for candidates with excellent attitudes and someone who is willing to take care of the customer. We furnish a company vehicle, all fuel, vehicle maintenance, and a company Phone. We offer paid vacations, sick days, and paid holidays, and have voluntary plans in health insurance and ancillary insurance. If you are passionate about what you do and lookiCarvana
Fort Worth, TX • (16.2 miles) • Full Time • 9/11/2026
We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500.As an Experienced Auto Technician, you will perform a full range of automotive repairsfrom light maintenance to heavy engine workand diagnostics on our vehicles, including:Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work.Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles.Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores.At CarvMicroplex Electric
Fort Worth, TX 76118 • (24.8 miles) • Full Time • 9/11/2026
Job SummaryWe are seeking a skilled Journeyman Electrician OR EXPERIENCED JOB RUNNER to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you.Responsibilities:Follow all safety rules and regulationsMaintain a clean and safe work environmentUse blueprints, sketches, or building plans to determine electrical requirements and materials neededInstall new electrical systems and repair existing systemsProvide bids for work ordersInteract with customers, suppliers, and other professionalsQualifications:Journeyman Electrician LicensePrevious experience as an Electrician is prefeVariosystems Inc
Southlake, TX 76092 • (32 miles) • Full Time • 9/11/2026
About VariosystemsVariosystems is a global electronics manufacturing solutions provider dedicated to delivering highquality, customercentric products across a wide range of industries including medical, industrial, aerospace, and communications. With locations across North America, Europe, and Asia, we partner closely with our customers to bring innovative electronics solutions to life. Our North America headquarters in Southlake, Texas serves a critical role in supporting regional customers and coordinating with global operations.Position OverviewThe Hand Solder is responsible for assembling and processing printed circuit boards and other electronic assemblies in compliance with IPC-610 standards. This role requires following Aegis work instructions, bills of material, and customer documeNationwide Technical Resources Corp
Grand Prairie, TX • (34.1 miles) • Full Time • 9/11/2026
- Setup / Operate Amada CNC Press Brake- Familiar with Tooling- Experience working with all types of metals- Safely operate assigned Amada Press Brake using the proper techniques and methods.- Properly and efficiently setup the Amada Press Brake for each scheduled job.- Follow all directions as noted on the Job Traveler- Ensure that all parts processed on assigned Press Brake meet the customer required quality level.- All issues must be reported to Shift Manager and / or Quality Assurance personnel.- Maintain the proper housekeeping around the assigned Press Brake.- Empty trash from your assigned table at the end of every shift.- Follow daily production schedule as noted on the Scheduling Board and communicate any delays to the Programmer / Scheduler.- Complete all production paperwork forTresu Royse Inc
Grapevine, TX 76051 • (35 miles) • Full Time • 9/11/2026
TRESU Americas, is a wholly owned subsidiary of the TRESU Group in Kolding, Denmark. We offer a line of products for the commercial printing industry. We build the most technologically advanced chambered doctor blade systems, coating and ink pumps, hot air drying, temperature-controlled chilling systems, printing plate cleaning equipment as well as full production presses for the Flexo industry. The qualified candidate will provide onsite service and remote technical support for all the TRESU product lines. Mechanical Field Service Engineer:Our engineers have the responsibility of balancing hands-on work with customer care. As a Mechanical Field Service Engineer for TRESU, you would be traveling around the Americas and other various countries to install, retrofit, repair, and assess TRESU’Ford Audio-Video Systems
Irving, TX • (38.6 miles) • Full Time • 9/11/2026
As an Installation Technician, you will play a critical role in designing and implementing advanced low-voltage commercial AV systems for businesses across the country. Your expertise will drive the installation of LED/LCD video walls, touch panels, speakers, and more, delivering immersive experiences that captivate audiences.Key Responsibilities IncludeCable Management: Pulling and terminating cables with precision and assembling racks, patch bays, and mixing consoles.Technical Integration: Crafting seamless connectivity between components for flawless system operation.Certifications and Safety: Training to obtain DOT and OSHA 10 certifications to ensure safe and high-quality work.DAL based with up to 25% travel required, including overnightsQualifications:Dependable, detail-oriented, and