Pittsburg, TX • (44.2 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Pittsburg, TX • (44.2 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Pittsburg, TX • (44.2 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Pittsburg, TX • (44.2 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Rockwall, TX 75087 • (42.2 miles) • Full Time • 9/28/2026

Prysmian, the world leader in solutions for energy and digital connections, continues to strengthen its global team with the addition of Channell, now part of Prysmian. Founded by the Channell family in 1922, Channell brings a longstanding legacy of innovation in outside plant infrastructure, serving Telecommunications, Municipalities, Internet Service Providers, Wireless, Water, Power, and CATV markets. Together, Prysmian and Channell team members are combining expertise, craftsmanship, and shared values to deliver a broader portfolio, from advanced cable systems and fiber connectivity solutions to enclosures and belowgrade vaults which support resilient infrastructure, the energy transition, and the growth of digital networks around the world.With 9,000 dedicated team members in North Am

Rockwall, TX 75087 • (42.2 miles) • Full Time • 9/26/2026

Benefits:A positive and collaborative work environmentVoluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s resi

Fate, TX • (39.1 miles) • Full Time • 9/24/2026

DescriptionThis position is responsible for performing inspections, diagnoses, and repairs of heavy equipment and/or related equipment or components, following established procedures and guidelines. Works independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals.Entry-level position – Generally has two or more years of experience and/or demonstrated job relevant knowledge/skills. Relies on instructions and pre-established guidelines to perform the functions of the job; works under moderate supervision.The incumbent in this position is expected to model the following practices on a daily basis:Demonstrate alignment with the company's mission and core business valuesCollaborate with key internal/external resourcesParti

Sulphur Springs, TX 75482 • (10.2 miles) • Full Time • 10/15/2026

Now Hiring: Cabinet & Hardware Assemblers (Bilingual Preferred)Estamos Contratando! Ensambladores de Gabinetes y Hardware (Se Prefiere Bilinge)Are you experienced in construction or assembly? Can you work with your hands, follow blueprints, and use power tools confidently?Rodgers Wade is looking for Cabinet/Hardware Assemblers to join our team in Paris, Texas!Tienes experiencia en construccin o montaje? Sabes usar herramientas y trabajar bien en equipo?Rodgers Wade quiere que formes parte de nuestro equipo como Ensamblador de Gabinetes/Hardware!Location / Ubicacin: Paris, TXPay Rate / Salario Inicial: $15–$17 per hour (based on experience)Schedule / Horario: Monday–Friday | 5:00 AM – 1:30 PM Some Saturdays & Overtime as needed / Algunos sbados y horas extras, segn sea necesarioWhat You’ll

Terrell, TX • (39.9 miles) • Full Time • 10/15/2026

This job is posted on behalf of Always There Personnel by Top Echelon.Metal Powder Coating Painter|$19-$20Location: Terrell TX MUST have 2+ years of experience. 5am-2:30-3:30| Will be working 6 days a weekBilingual (is a plus)Job Description: The Metal Powder Coater is responsible for applying powder coating finishes to metal surfaces using electrostatic spray equipment and ovens. This role includes preparing surfaces, masking, coating, curing, and inspecting parts to ensure a high-quality, durable finish. The position requires attention to detail, knowledge of coating techniques, and adherence to safety and production standards. Key Responsibilities: Prepare metal parts through cleaning, sanding, and masking.Apply powder coatings using spray guns and curing ovens.Inspect coated items for

Bonham, TX 75418 • (44.1 miles) • Full Time • 10/15/2026

Bonham, TX | On-site | Manufacturing | Reports to VP of ManufacturingABOUT THE ROLEAs the chief on-site leader of our Bonham, TX manufacturing facility, you'll drive performance across safety, quality, delivery, profitability, and culture. Working closely with corporate leadership, you'll craft and execute strategies that strengthen all key functions - from production and financial operations to people development and continuous improvement.KEY RESPONSIBILITIESLead daily plant operations through a team of production managers and supervisors, ensuring safety, quality, delivery, and financial targets are consistently met.Build and sustain a culture of employee engagement - one where team members have meaningful autonomy and collaboration as employee-owners.Champion operational excellence thr

Terrell, TX 75160 • (38.9 miles) • Full Time • 10/13/2026

Build With Precision at Helion Step onto a fast-paced manufacturing floor where your welds become the backbone of structural steel assemblies. At Helion, you join a crew that counts on one another to hit production goals without compromising quality. Your day blends craftsmanship with consistency as you transform prepared components into finished assemblies using MIG (GMAW) processes. A day in the life You review blueprints and weld symbols, plan your sequence, and dial in your machine for production work using .052 wire. You maintain 27–30 amps with wire speeds around 400–500, laying down clean, consistent beads on parts that have already been fit-up and prepared. From joists and I-beams to webbing, connection plates, stiffeners, and supporting brackets, you move methodically through eac

Paris, TX 75460 • (42.4 miles) • Full Time • 10/12/2026

Overview Company Overview:Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Allied Universal® is hiring a Security Professional Flex Officer. The Security Professional Flex Officer will serve and safeguard clients in a range of industries such as Healthcare, Education, Finance and more. Join a leading team where flexibility meets opportunity. As a Security Professional Flex Officer, you’ll use our exclusive shift-pickup platform to view and claim open shifts based on your availability - giving y

Farmersville, TX 75442 • (37.1 miles) • Full Time • 10/12/2026

Job Summary This posting is only open to those who have the technical skills from operating multi-color flexographic printing presses. Ideally Central Impression, however all experienced flexo operators will be considered. We are seeking a skilled and detail-oriented Flexographic Printing Operator to join our dynamic team. The ideal candidate will be responsible for operating our 8 color wide web, servo CI Flexographic printing presses, ensuring high-quality print production while adhering to safety and quality standards. This role requires a blend of technical expertise, creativity, and a commitment to excellence in print advertising and graphic design. Responsibilities Operate and maintain flexographic printing presses to produce high-quality printed materials. Set up press equipment, in

Rockwall, TX • (42.4 miles) • Full Time • 10/12/2026

Production ManagerRockwall, TX | Onsite | $90,000–$120,000 + Performance BonusEmployment Type: Direct HireBenefits: Medical, Dental, Vision, 401(k), PTO and comprehensive benefitsSponsorship: Position in not eligible for sponsorshipAbout the OpportunityWe are partnering with a growing specialty manufacturing organization in the Rockwall, TX area to identify an experienced Production Manager to lead day-to-day manufacturing operations. This is an opportunity to take ownership of production performance, team leadership, quality, safety, and continuous improvement within a hands-on manufacturing environment.The ideal candidate is a strong people leader who thrives in a smaller manufacturing operation and enjoys being close to the floor, solving problems, and driving results.What You'll DoOver

Mount Pleasant, TX 75455 • (44.5 miles) • Full Time • 10/12/2026

Job description At Mid America Pet Food, our vision is to enrich the lives of pet families, and we believe that starts with our own team. We foster a positive and inviting atmosphere where employees feel valued and appreciated, making MAPF a great place to build your career.As a full-time team member, you'll enjoy a generous benefits package, includingemployer-paid health insurance,100% coverage of qualifying dependents,paid time off (PTO), aFlexible Spending Account (FSA),401k matching, and opportunities forovertime.We are currently seeking a dedicated Production Tech to contribute to maintaining a clean, professional, and safe working environment. In this multi-faceted role, you will perform routine and non-routine work as directed, always adhering to company policy, procedures, and valu

Rockwall, TX 75032 • (43.1 miles) • Full Time • 10/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Princeton, TX 75407 • (44.6 miles) • Full Time • 10/10/2026

True Pitch Manufacturing Tech’s manage the daily operations of our manufacturing processes to design, build, and package our products to ship to our customers. This is an important role within our company and pride in workmanship is paramount as well as a drive to exceed expectations. Our products are used by baseball and softball athletes around the World who value high quality products that will help them become the best they can be. The technician will be exposed to industry training and development on manufacturing processes, efficiencies when using composites and other materials and education on how to improve the durability, design, appeal and efficiency of our products. Manufacturing Technicians will help train new employees on the processes and will manage the flow of manufacturing

Winnsboro, TX • (26.1 miles) • Full Time • 10/8/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Paris, TX 75462 • (41.4 miles) • Full Time • 10/5/2026

Description: RNR Tire Express is a national franchise retailer that provides safe, quality tires and wheels with affordable payment options.At RNR we have built a culture around “SERVING our customer and not just providing them customer service”. We support and empower our employees with excellent training and tools which enables them to provide our customers with a unique and exceptional experience.RNR Tire Express started as a family business over 20 years ago in a small shop located in Tampa, Florida. Since then, we have grown to over 160 stores across 26 states, and continue to open more locations across the country each year. While we have expanded far beyond that little shop in Tampa, we have never lost our core value of FAMILY.At RNR, we believe having a healthy work / life balance

Mount Pleasant, TX 75455 • (44.5 miles) • Full Time • 10/3/2026

Job Title: Powder Coater/Part timePay: $15–$18/hr (varies by experience)Job Summary:Responsible for applying powder coating to metal parts/products to create a durable, high-quality finish. You make things look good and last long kind of like a solid resume.Duties & Responsibilities:Prep metal surfaces (cleaning, sanding, masking, blasting if needed)Apply powder using spray gun and coating equipmentCure parts in oven to proper temp and timeInspect finished product for thickness, coverage, defectsHang/remove parts from racks and maintain workflowMaintain equipment and keep work area clean and safeFollow all PPE and safety protocols (yes, you have to actually wear the gear)Requirements:1+ year powder coating experience preferredKnowledge of metal prep, coating, and curing processAbility to l

Hawkins, TX 75765 • (40.4 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Princeton, TX 75407 • (44.6 miles) • Full Time • 9/30/2026

Benefits:401(k)Dental insuranceHealth insuranceVision insurance A CNC Utility position is available at Fabhar Corporation to support bridges material handling, quality inspection, and machine operation. Workers in this role keep production flowing by loading parts, operating secondary tools, and learning advanced machining under direct supervision. Key ResponsibilitiesMaterial Management: Transporting, staging, and tracking raw materials and finished parts across the shop floor.Machine Tending: Loading and unloading parts into the CNC. As you gain experience, you may perform basic setups or operate secondary equipment.Quality Control: Inspecting finished components using precision hand tools (e.g., micrometers, calipers, and dial indicators).Machine Maintenance: Keeping the workspace clean

Greenville, TX 75402 • (20.9 miles) • Full Time • 9/29/2026

Position SummaryEXOS Aerospace is seeking a Guidance, Navigation, and Control (GNC) & Flight Controls Engineer to support the development, analysis, simulation, testing, and validation of flight systems for reusable suborbital vehicles and flight test infrastructure.This role is primarily focused on GNC, including vehicle dynamics, trajectory design, guidance logic, navigation performance, control system development, simulation, and post-flight data analysis. The ideal candidate will also be comfortable working beyond traditional GNC boundaries to support instrumentation, sensors, controls hardware, data acquisition, integrated testing, and troubleshooting as needed.In addition to the engineering scope, this position carries technical program management responsibilities in direct support o

Princeton, TX 75407 • (44.6 miles) • Full Time • 9/29/2026

A CNC Utility position is available at Fabhar Corporation to support bridges material handling, quality inspection, and machine operation. Workers in this role keep production flowing by loading parts, operating secondary tools, and learning advanced machining under direct supervision.Key Responsibilities:Material Management: Transporting, staging, and tracking raw materials and finished parts across the shop floor.Machine Tending: Loading and unloading parts into the CNC. As you gain experience, you may perform basic setups or operate secondary equipment.Quality Control: Inspecting finished components using precision hand tools (e.g., micrometers, calipers, and dial indicators).Machine Maintenance: Keeping the workspace clean, organizing tooling, and reporting maintenance issues.Cross-Tra

Paris, TX 75460 • (42.4 miles) • Full Time • 9/27/2026

The Controls Technician installs, maintains, troubleshoots, and improves industrial control systems, electrical systems, and automation equipment used in steel pipe production. Uses PLC, HMI, drive, and robot software to diagnose faults, make approved program changes, and maintain backups. Supports production and maintenance teams during breakdowns, preventive and predictive maintenance, and equipment commissioning, and diagnoses mechanical issues that affect controls performance.ESSENTIAL FUNCTIONS/RESPONSIBILITIES:include the following: (Other duties may be assigned, including but not limited to cross training and housekeeping.)SafetyFollow all safety rules, including LOTO, electrical safe work practices (NFPA 70E), confined space, fall protection, and hazard communication. Stop work whe

Quitman, TX • (24.4 miles) • Full Time • 9/26/2026

Join Our Team as a Manufacturing Production Employee!Are you ready to bring your skills to a dynamic and growing company? Amphora Nutritional Manufacturing, located in Quitman, TX, is looking for a dedicated and detail-oriented Manufacturing Production Employee to join our team. If you have at least one year of experience and are eager to contribute to a company that values quality and teamwork, we’d love to hear from you!About Amphora Nutritional ManufacturingAt Amphora Nutritional Manufacturing, we pride ourselves on producing high-quality nutritional products that make a difference in people’s lives. Our team is passionate about excellence, and we work together in a supportive and collaborative environment to ensure every product meets our high standards.What You’ll DoAs a Manufacturing

Terrell, TX 75160 • (38.9 miles) • Full Time • 9/23/2026

Summary/ObjectiveThe Production Supervisor is responsible for overseeing daily manufacturing operations and leading front-line production employees to ensure safe, efficient, and high-quality output. This role reports directly to the Production Superintendent and is accountable for executing production plans, maintaining workflow efficiency, and supporting continuous improvement initiatives.The Supervisor provides hands-on leadership on the production floor and ensures adherence to company policies, safety standards, and quality expectations. This role is accountable for safety, quality, delivery, cost, and team development within a high-volume, high-mix metal fabrication environment.Essential FunctionsSupervise daily production activities to ensure achievement of safety, quality, delivery

Greenville, TX • (22.6 miles) • Full Time • 9/22/2026

At PEARCE, we've got a career for you!Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://ww

Canton, TX 75103 • (38.8 miles) • Full Time • 9/21/2026

Road Ranger is looking for Subway Team Members to join the team at our under construction Canton, TX location! Competitive wages based upon experience. The store is schedule to open late January 2025.Road Ranger is GROWING and Hiring Immediately!!Are you looking for Part Time work? We have positions available!We offer benefits for our FULL and PART-TIME employees.Join the Road Ranger family and see how far your drive can take you!At Road Ranger, we aim to provide drivers with the warm hospitality, top tier fuel, quality food, and essential products they need along their journey. We owe our success to our friendly, driven employees who thrive in our fast-paced environment. To reward their hard work, we offer our employees a wide variety of competitive benefits to support their health and we

Sulphur Springs, TX 75482 • (10.2 miles) • Full Time • 9/21/2026

Description: Position Summary We are seeking a dependable and safety-focused Manufacturing Associate to join our trailer manufacturing team. This position is responsible for hanging and securing goosenecks, dump trailers, and car haulers onto an overhead assembly line system and operating an overhead crane to properly position units for processing through a shot blast machine. This role requires attention to detail, safe equipment operation, and the ability to work in a fast-paced industrial environment.Key Responsibilities Hang goosenecks, dump trailers, and car haulers onto the overhead assembly line systemOperate an overhead crane to lift, maneuver, and position trailers safelyEnsure trailers are properly secured, balanced, and aligned before entering the shot blast machineMonitor units

Farmersville, TX 75442 • (37.1 miles) • Full Time • 9/21/2026

WHAT WE DO:Founded in 1956, Dunaway is a multidisciplinary professional services firm offering Survey, Civil and Structural Engineering, Planning + Landscape Architecture, and Construction Inspection Services (CIS), in addition to Environmental and Geographic Information Systems (GIS), SUE (Subsurface Utility Engineering), and ROW (Right-of-Way) services. For over seventy years, Dunaway has been a trusted client advisor, committed to improving lives in the communities we serve. Supported by a team of 370+ professionals with eight offices across Texas, including Fort Worth, Dallas, Austin, San Antonio, Farmersville, Houston, and Midland.WHO WE ARE:The Dunaway Difference is our three foundational components (represented by the waves in our logo): Core Values, One Heart and Profitable Growth.

Greenville, TX 75402-4941 • (22.6 miles) • Full Time • 9/19/2026

Description:DescriptionAs an Electronics Manufacturing Test Engineer, you will play a pivotal role in the development, implementation, and ongoing support of test solutions across our electronic manufacturing processes. Leveraging your expertise in electronics engineering and product development, you will lead the design and build of test fixtures, drive comprehensive test development for electronic circuit board production, and ensure all test solutions remain operational and effective throughout their lifecycle all while adhering to Lean methodologies and ISO 9001:2015 standards.Essential Job Functions:Develop and implement comprehensive test strategies, procedures, and test programs for electronic assemblies, ensuring robust coverage across all stages of the production lifecycle.Design,

Paris, TX 75460 • (42.4 miles) • Full Time • 10/14/2026

Please apply at https://atcog.applicantpro.com/jobs/The Ark-Tex Council of Governments (ATCOG) is now accepting applications for an as-needed TRAXOperatorin Lamar County. This position is as needed, filling in when drivers are absent. Position is responsible for providing transportation services to individuals, including persons with disabilities, in a safe and timely manner; and operating and maintaining the TRAX vehicles.Your application MUST identify the required minimum qualifications for this position. Please detail how you meet the minimum qualifications AND respond in detail to the KSA's in the "Worked Performed" blocks of the application. You may use plain bond paper in order to effectively respond to all the KSA's.EDUCATION/TRAINING:Requires high school diploma or its equivalent.

Mineola, TX • (31.9 miles) • Full Time • 10/14/2026

DescriptionThere’s a reason Trinidad Benham is recognized as a leader in our industry. Trinidad Benham Corp has been in business for over 100 years, and we know a thing or two about providing stable employment and growth.WHAT YOU'LL BE DOINGThe Machine Operator is primarily responsible for efficiently operating packaging machinery to produce various products according to customer specifications.Essential functionsReasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.Read and understand daily production schedule and material requirements.Transport needed packaging materials to production area.Set-up and operate packaging equipment with correct materials and product based on order specifications. Safely and efficiently stack finish

Greenville, TX 75402 • (20.9 miles) • Full Time • 10/5/2026

Shift: 1st ShiftSchedule: Monday-Friday / 7:00 AM to 5:00 PMPay Range: $18.00 to $20.00 per hour (based on experience)Make Your Mark in Advanced Manufacturing!Are you ready to take your manufacturing career to the next level? We're seeking a skilled Production Systems Operator to join our dynamic team and operate state-of-the-art machinery systems in our modern manufacturing facility.Key Responsibilities:Lead the operation of sophisticated production machinery systems.Perform quality control testing using industry-standard methods.Troubleshoot and maintain high-tech equipment.Operate modern material handling equipment.Contribute to continuous improvement initiatives.Qualifications:High School Diploma or GED.Manufacturing experience.Forklift/powered industrial truck experience.Safety-consci

Sulphur Springs, TX 75482 • (10.2 miles) • Full Time • 10/8/2026

Key Responsibilities:Respond to roadside and on-site service calls using a fully equipped service truck.Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial.Diagnose and repair tire-related issues and perform light mechanical repairs as needed.Inspect tires and wheels for wear, damage, and proper inflation.Perform fleet inspections and preventative maintenance checks when required.Operate tire pressure monitoring systems (TPMS) and other diagnostic tools.Maintain the service truck, tools, and equipment in safe operating condition.Follow DOT regulations, company safety policies, and traffic laws at all times.Provide exceptional customer service, including clear communication of service details and timelines.Assist with w

Sulphur Springs, TX 75482 • (10.2 miles) • Full Time • 9/27/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut Cook, you can be the smiling face that cooks our food and serves the customers.You will learn how to cook from scratch. Working with us will give you financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime.What are we looking for?The good news is that your training will teach you everything you need to know to succeed in the job. But there are a few skills you should have from the get-go:You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you’re not going to

Rockwall, TX • (42.4 miles) • Full Time • 9/20/2026

LearnTastic is a fast-growing online education platform providing accredited continuing-education and compliance courses for professionals across industries-from healthcare and construction to HR and education. With more than 1,000 courses and over a million learners served, LearnTastic is redefining accessible, self-paced learning. Our mission is to make professional development simple, engaging, and impactful-anytime, anywhere. We are seeking a skilled Commercial Refrigeration Service Technician to install, maintain, and repair commercial refrigeration systems. The ideal candidate will have hands-on experience with large-scale cooling systems, strong troubleshooting skills, and a commitment to safety, compliance, and operational efficiency. Key Responsibilities:Install, inspect, and main

Greenville, TX 75401 • (24.2 miles) • Full Time • 10/9/2026

Job Title: Mechanical EstimatorLocation: Paris, TexasSalary: $65,000 – $100,000 per year (Based on experience)Job Type: Full-TimeSchedule: Monday – FridayAbout UsAt Harrison, Walker & Harper (HWH), we’ve been building more than structureswe’ve been building trustfor over 100 years. Our culture is built on honesty, integrity, and strong personal relationships, and it’s made us a company people are proud to work for and with.Job OverviewWe’re seeking a skilled and detail-oriented MechanicalEstimator to join our team in Paris, TX.The Mechanical Estimator is responsible for preparing accurate and competitive cost estimates for mechanical construction projects, including HVAC, plumbing, piping, and process mechanical systems. This position reviews construction documents, performs detailed quant

Rockwall, TX 75087 • (42.2 miles) • Full Time • 9/28/2026

Prysmian, the world leader in solutions for energy and digital connections, continues to strengthen its global team with the addition of Channell, now part of Prysmian. Founded by the Channell family in 1922, Channell brings a longstanding legacy of innovation in outside plant infrastructure, serving Telecommunications, Municipalities, Internet Service Providers, Wireless, Water, Power, and CATV markets. Together, Prysmian and Channell team members are combining expertise, craftsmanship, and shared values to deliver a broader portfolio, from advanced cable systems and fiber connectivity solutions to enclosures and belowgrade vaults which support resilient infrastructure, the energy transition, and the growth of digital networks around the world.With 9,000 dedicated team members in North Am

Greenville, TX • (22.6 miles) • Full Time • 9/22/2026

At PEARCE, we've got a career for you!Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://ww