Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

Overview: National Tank Services stands proudly at the forefront of North America's truck maintenance and tank cleaning services industry. Our commitment is unwavering as we offer a comprehensive range of solutions, including inspections, repairs, certifications, and top-tier cleaning services to support the thriving bulk transportation sector. We've got all the tools fleets need to maintain certification, prioritize safety, and stay compliant.Are you prepared to embark on a career with meaning Your journey begins here - become a part of our NTS team today!Contact our team of in-house Recruiters: 1-866-8-TRIMAC Pay Details: Starting pay $26.50 (depending on experience) Schedule: Monday- Friday 2:30 pm - 10:30 pm Responsibilities: Perform preventive maintenance on trucks and trailers while utilizing personal safety equipment as required.Move trucks and trailers in and out of shop for maintenanceOpen repair orders and charge the appropriate parts to the repair orderPerform tire inspections/appropriate paperwork to company standardsPerforms shop clean-up and housekeeping responsibilities as well as other miscellaneous related duties as assigned.Inspects and maintains basic vehicle/accessorial worthiness including proper fuel levels and tire air pressure, fluid levels, brakes, lights, and safety equipment and submits reports indicating condition of equipment.Comprehend and perform Driver Vehicle Inspection Repair (DVIR) processDiagnose and repair: Tire/wheel, Brakes & Air Systems, Clutch & Linkage, Mud flaps/hangersPossesses and demonstrates the ability to perform assigned tasks in a manner that adheres to the company's Safety, Health, Environmental, and Security policies. Qualifications: Must have a valid driver’s license1-5 years experienceAbility to provide own basic hand toolsBasic computer skillsAbility to read and comprehend service manualsKnowledge of tools and equipment used in the shop to repair and maintain company equipmentA basic knowledge of tractor and trailer maintenanceKnowledge of D.O.T. regulations and out-of-service parameters for tractors, trailers, and accessorial equipment.Knowledge of proper procedures for handling and disposal of hazardous waste materials. Benefits: Paid weekly by direct depositHoliday and vacation payMedical, dental, and vision insuranceEmployee Assistance ProgramLife Insurance & Disability InsuranceFlexible Spending Accounts (Health & Dependent Care)401(K) profit sharing with company match (fully vested after 3 years) Safety Commitments: We make safety a part of every decisionWe make safety personalWe have the courage to intervene Pay Range: Starting from USD $26.50/Hr.

Req ID:448834Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

Daily Thermetrics, a leader in high-quality manufacturing, is seeking a skilled QA Inspector. This role ensures product safety, reliability, and quality by independently performing inspections using advanced techniques to detect corrosion, defects and other conditions.
The QA Inspector conducts inspections, interprets findings and reports results per company and engineering standards, while effectively communicating with customers, engineering teams, and management.
Production positions may be assigned to either of the following full-time work schedules: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
Job Duties:
Maintain a safe, secure, and healthy work environment. Adhere strictly to QA standards and practices, as well as sales order and engineering requirements. Conduct all assigned QA inspections, testing, and calibration duties. Assist non-certified inspectors or new hires with on-the-job training and guidance. Perform or attain job-required Non-Destructive Testing (NDT) certification as necessary. Carry out inspections for which qualifications or certifications are held. Accurately interpret and report the results of inspections to relevant stakeholders.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. High school diploma or equivalent required Minimum 6 month’s experience in inspections in a manufacturing environment. Ability to work in Microsoft Word and Excel Ability to work with computers / computerized equipment Ability to read, understand, and communicate in English Ability to follow written or verbal, technical instructions Position is based at a manufacturing/fabrication, climate-controlled shop environment. Interaction with other Inspections employees, as well as engineers, supervisors and third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 75 pounds Must be able to walk and stand for majority of eight-hour work day Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop. Ability to maintain focus and multitask effectively Excellent communication skills, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)

Daily Thermetrics is a fast-growing manufacturing company, and we are looking for a dedicated Purchasing Assistant to join our team. In this role, you will support our purchasing and sales departments, ensuring that projects are completed safely, accurately, and within tight deadlines to meet both quality standards and customer expectations.
The Purchasing Assistant is an entry-level position that plays a key role in maintaining the smooth operation of our supply chain. You will be responsible for providing administrative and operational support, assisting with the preparation of key procurement documents, and tracking orders to ensure timely deliveries.
Support the Purchasing Department in preparing RFQs (Request for Quotation), RFPs (Request for Proposal), and purchase orders. Collaborate with the Sales team to obtain pricing from suppliers for RFQs. Assist in tracking open orders, updating procurement statuses, and maintaining detailed reports. Work with the Accounting team to resolve supplier invoicing discrepancies. Communicate with suppliers to address missed deliveries, short shipments, and other order issues. Contribute to team objectives by taking on additional responsibilities as needed.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High school diploma or equivalent (Associate Degree or B.Sc. in Supply Chain or related fields preferred) Minimum two years experience in a purchasing position Proficient in purchasing functions, supply and inventory management. Excellent communication, negotiation and interpersonal skills Must be a detail-oriented team player with ability to prioritize, multitask and work with minimal supervision Strong organizational skills, understanding of sourcing and the ability to maintain vendor relationships Experience with spreadsheet computer applications a must Dependable and Reliable production orientation Position is based at a manufacturing/fabrication shop, climate-controlled shop environment. Interaction with machine shop employees with varying experience, engineers, supervisors as well as third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 20 pounds Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Strong attention to detail Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop, as needed. Ability to maintain focus and multitask effectively Ability to communicate technical concepts and materials specifications, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Instruments is seeking an entry-level Machine Shop Helper to join our rapidly growing manufacturing team. This position will assist with the setup, parts delivery, monitoring, operation, cleaning of machines in machine shop. Shop Helpers are responsible for working in a cohesive team environment to ensure all production goals are in compliance with customer requirements. The successful Machine Shop Helper will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production & shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position.
Machine Shop Helper position will be on: Production Second Shift Monday - Friday 1:30 pm - 10:00 pm
This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Responsibilities: Machine Shop Helpers perform tasks that are necessary to the production process. Carry out assembly day-to-day work instructions to ensure accurate and timely production goals Read and understand work instructions. Assist with maintaining, operating, cleaning machines Maintain a clean, orderly work environment Contributes to team effort by accomplishing related results as needed
Qualifications: Team Work orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)