Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are seeking a Class A CDL Driver with experience hauling and operating heavy highway equipment for a Heavy Highway Road & Bridge Company working in Houston and surrounding counties.
Performs pre-trip and post-trip inspection of trucks, trailers, and equipment Transports equipment to job sites Safely load/unload excavators, cranes, backhoes, loaders, motor graders, dozers Must be able to safely operate dump truck and water truck Works with hydraulic tools, hand tools, and electrical tools Performs manual labor as needed to accomplish work and meet job accomplishment expectations Responsible for keeping the work-site, vehicles, equipment and tools are safe, clean and ready for use Must be flexible/work-ready to perform tasks for other departments/locations as may be required to meet needs Follow all required safety policies and procedures Other duties as assigned
Pay rate: $20 - $30/hr based on experience
Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Qualifications: CDL - Class A (Required) 2 years experience as a CDL Driver with ability to load and haul heavy equipment Minimum 2 years experience within the road construction industry Must have a clean driving record Must pass a physical and drug/alcohol test Must be able to pass a background check We participate in E-VERIFY
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
Forde Construction is an Equal Opportunity Employer

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTLOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11932 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Description OverviewThe Maintenance Manager will report to the General Manager and oversee the fleet maintenance program to ensure safe and effective vehicle upkeep. A successful person in this position will have experience acting as adviser to upper management on potential issues with extensive experience in managing and producing reports. This person will have experience as a supervisor of supervisors and provider of guidance to technicians to ensure operational efficiency.ResponsibilitiesOversees a mixed transit bus fleet of 200+ vehicles with annual fleet miles in excess of 10 million miles and a staff of 50+ employees. Schedules employees for the department; ensures the effective supervision of mechanics and other shop workers.Selects, trains, motivates, and evaluates assigned personnelCoordinates work performed by outside vendorsOversees the development of efficient repair schedules; reviews repair cost estimatesApproves priority of maintenance and repairs based on availability of materials and parts and requirements of scheduled operationsHelps to ensure that company and client equipment is maintained and operating efficiently.Ensures that all vehicles are fueled, cleaned, and properly workingDevelops and implements safety policies and procedures for the department; maintains a safe working environmentParticipates in the development and administration of the operational budgetIdentifies opportunities for improving service delivery methodsEnsures that property, grounds, and facilities are clean and well organizedOther duties as requiredQualificationsHigh school diploma or equivalent requiredASE Certification preferred or willing and able to obtainCDL Class B (or higher) with passenger and airbrake endorsements preferred or able to obtain. (Training Available)5 years or more of progressively responsible experience in the repair and maintenance of all types of heavy-duty automotive and transit equipment, including at least 3 years of supervisory experienceGood written and oral communication skillsBroad understanding of all mechanical systems related to heavy-duty transportation vehiclesFamiliarity with laws/regulations associated with the safe operation of maintenance facilitiesAbility to read, interpret, and apply documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to read blueprints, schematics, and other mechanical and/or electrical diagramsAbility to read and write routine reports, forms, and other documentation or correspondence - Working knowledge and proficiency with Microsoft OfficeAbility to organize and perform work efficiently, strong attention to detailRegularly required to stand; walk; use hands to manipulate, handle or feel; reach with hands or arms; and talk or hear.Physical RequirementsMajority of work is accomplished indoors and well-ventilated facilities with telephone and computer.The employee is generally subjected to long periods spent sitting, typing, or looking at a computer screen.Must be able to bend, twist and be able to lift 50lbsWe offerMedical/Dental/Vision health benefits401(K) retirement planPaid time offPaid holidaysAbility to advance your careerAbout Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles.Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more atwww.TransdevNA.comor watch an overview video athttps://youtu.be/ilO5cv0G4mQWhy Work at Transdev Excellent question! With over 800 locations across our divisions, you will have exponential growth opportunity. Furthermore, because safety is our number one priority, you will work in a safe and positive work environment every day. Lastly, you will receive a competitive benefits package that includes 401k with company match, paid time off, and a complete insurance plan after 30 days of employment (health, dental, and vision).This position is subject to background testing and drug screening.Transdev is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran statusApply today to join our team!The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request.Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.Drug-free workplaceIf based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check.California applicants: PleaseClick Herefor CA Employee Privacy Policy.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain.We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $30.00-34.00!#PR Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Req ID:448836Address: 350 E Walnut Street Hungerford, TX, 77448Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Hourly rate starts at $34.19 - $55.30, depending on level of experience. Power Plant Mechanic - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electrical high voltageequipment with as required to support plant operations and maximize asset value.PRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Who We Are Invitation Homes is a team of more than 1,400 associates who come from all walks of life. We call different communities “home," but our shared values bind us together. Invitation Homes is a place where possibility lives.The market teams include our Leasing, Property Management and Rehab, Turns & Maintenance professionals. Together, our dedicated associates work hard to build excellent resident experiences while maintaining high-quality homes and ensuring potential residents are presented with a rental property they can’t refuse.Your Role on the Team As a Maintenance Technician at Invitation Homes, you will be performing high-quality maintenance work in our single-family rental homes while providing outstanding customer service to our residents. This includes but is not limited to the following tasks:Completing maintenance service requests across multiple tradesProviding excellent customer service and promoting a quality living experience for all residentsCompleting regular ProCare visits in residents’ homes to perform proactive maintenance and repairsEducating residents regarding all maintenance topicsCompleting general property condition assessments at all property visits and alerting the property management team when items require immediate attentionReviewing and using Technician-specific reports to find opportunities for improvementPerforming repairs in vacant properties while they are on-the-market or during the turn processProperly using and caring for company-supplied tools, materials, and vehiclesPerforming other duties as assignedYour Experience Includes High School diploma or equivalentOSHA 10 is required (new hires will have up to 90 days to complete OSHA 10 certification if not already certified).Proven experience in residential repairs and maintenance, other building maintenance or related experience.Understanding of residential construction and mechanical systems and ability to perform general repairs in some of the following: plumbing, electrical, carpentry, sheetrock, exterior structural, HVAC (minor) and appliances. Some training will be provided.Excellent customer service and interpersonal skills as well as strong verbal and written communication skills; multi-lingual a plusComfortability using mobile devices (i.e. iPad and/or iPhone) and various mobile applicationsMust possess a current driver's license, automobile insurance, and any other licenses and/or certification as required by state lawThe following certifications are preferred but not required:EPA Certification, Type I and IIHVAC CertificationCPO certification (pool)Ability to be at work on a regular and consistent basis including weekends and holidays as neededAbility to provide basic hand and power toolsAbility to perform work that requires the following:Frequent climbing, reaching, use of fingers, stooping, kneeling, crawling, pushing, pulling, lifting, talking, and hearingAbility to lift and/or move an excess of 50 pounds or more and operate standard maintenance equipment as assignedWhy Us We stand for flexibility, opportunity, and a home that people can make their own. It’s as true for our associates as it is for our residents. Just like we help our residents live freer, we liberate our associates’ careers, too. Our associates know that goals matter, potential is unlocked, and careers thrive. Invitation Homes isn’t just a workplace but a possibility place. We offer each new associate:Competitive pay and an annual bonus program for all associatesGenerous paid time off plans including vacation accrual, sick time, volunteer time, and standard and floating holidays401k with matching company contributionsAwesome work environment with casual dressTeam events and gatheringsEmployee resource groups: Together with Women, Asian Alliance, Black Collective, Juntos, Gen Next, and Open Invitation.Build a foundation here and apply today!Salary Range$19.11 - $33.13Compensation and BenefitsTo attract and retain top talent, we're pleased to offer competitive compensation and benefits, including:Annual bonus programHealth, dental, vision, and life insuranceLong-term and short-term disability insuranceGenerous paid time off plans include vacation accrual, sick time, standard holidays and floating holidays401(k) with company matching contributionsAwesome work environment with casual dressTeam events and gatherings (Pre- and Post-Covid)Invitation Homes is an equal opportunity employer committed to fostering a diverse, inclusive and innovative environment with the best associates. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other factor protected by applicable federal, state or local law. If you have a disability or special need that requires accommodation, please contact us at .To all recruitment agencies: Invitation Homes does not accept agency resumes. Please do not forward resumes to Invitation Homes employees. Invitation Homes is not responsible for any fees related to unsolicited resumes.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Experience with installing mechanical equipment.Experience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O rings.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel, including globally, for extended periods of timeAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: Professional certifications in this field.Experience working with ValuesAbility to work collaboratively with unfamiliar teams.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-12061 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

At Constellation, a freshly independent and soon-to-be Fortune 200 company, we're providing the energy and services to transform our future. Combining next generation technologies and product offerings with the country's lowest carbon generating fleet, our company is purpose-built to meet the challenges of the climate crisis.Constellation has been the leader in clean energy production for more than a decade. Now we're speeding delivery of low-carbon or no-carbon power to help families, communities, governments, and businesses meet their sustainability and decarbonization goals. Constellation provides 10 percent of total clean power and 22 percent of clean baseload power in the United States and is the leading competitive retail supplier of energy products, services and clean energy solutions. The race is on to confront climate change, and no company is more ready to meet that challenge.We are committed to advancing diversity, equity and inclusion and believe in attracting, retaining and advancing employees who will best serve and represent our customers, partners and communities. We provide a workplace that ensures mutual respect, where each individual has the opportunity to grow and contribute at their greatest potential. Constellation will provide you the tools and resources you need to design, build and power a successful career.Constellation offers a wide range of benefits, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. Power Plant Instrumentation and Controls - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electricalequipment as required to support plant operations and maximize asset value.Hourly Rate Starts at $34.19 - $55.30, depending on level of experiencePRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 poundsConstellation is proud to be an equal opportunity employer and employees or applicants will receive consideration for employment without regard to: age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law.VEVRAA Federal Contractor

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. This is a Night shift- Overtime required Responsibilities & Requirements : Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Ability to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies.Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned.1st or 2nd shift available Preferred Experience / Skills: Multistage pump assembly experience, API BB3/BB5".Excellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.High School Diploma / GEDPrevious experience assembling API pumps Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11930 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Power Plant Electrician - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electrical high voltage equipment with as required to support plant operations and maximize asset value.Hourly Rate Starts at $34.19 - $55.30, depending on level of experiencePRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Customer Product Repair Mechanic-First shift position, Overtime required Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. Responsibilities include: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Work on API PumpsAbility to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate Requirements: 5 plus years relevant experienceAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and partsMust be able to work overtime, weekends, and holidays as the business dictates.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Comply with all Flowserve policies and procedures. Preferred Experience / Skills: Ability to understand work instructions, safety procedures, and company policies.Electrical wiring experience or mechanical assembly experienceExcellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.HS Diploma / GED Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11929 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment