The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2nd - 3rdCompensation:$26.10 - $35.72 /hrSign-On Bonus: $3,000 Benefits Information $1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee Discounts PrincipalAccountabilities Using hand tools to perform maintenance on production machineryEnsuring food safety and qualityCleanliness and housekeepingResponding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actionsCommunicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shiftDocumenting daily work assigned on paper and also in the maintenance management system (SAP)Troubleshoot and repair complex problems on all production equipmentUtilize parts in inventory to repair equipment and follow procedures in documenting what is issued outIdentify problems and make suggestions to improve operational processesPMfrom required sectionContact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for partsMust be able to learn and use SAP to document work hours, search for parts, and generate work ordersPerform advanced preventative maintenance (PM’s) on plant equipmentUse measuring devices accurately (metric and standard).Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorshipMust be 18 years or olderAble to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodationsAbility to read, write, and speak EnglishAbility to use tools and work on mechanical and pneumatic componentsAble to perform basic computer skillsAbility to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 monthsAble to operate forklift and other motorized equipmentProgram PLC’s using schematics and ladder logicCompleted industrial maintenance certification programMinimum of 1 year maintenance with proven preventative maintenance (PM’s) experience in a manufacturing facility Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet

SUMMARY: Provides assistance to Manufacturing Engineers, Design Engineering, and production departments. Reviews processes and procedures to determine predictability of new builds and improvements on existing builds including prototyping, repairing machinery, and trouble shooting fixtures/tooling.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in prototype development by debugging, modifications, assembly, testing and inspecting.Detects failures and makes recommendations to Manufacturing Engineers and Design Engineers to make parts producible.Reviews customer drawings and evaluates feasibility, and dismantles, repairs, or sends off defective equipment.Perform, aide, or give direction on periodic preventive maintenance or general repair on equipment or machinery.Programs machinery and equipment such as programmable controllers, electrical testers, and marking equipment.Reviews documentation such as manufacturing procedures, BOMS, drawings and routers.Operates computer terminal to input and retrieve data and create or update documentation.Provides specialized training to production employees and technical direction to production trainer.Provides assistance to Engineers to adapt existing design to perform correctly in new design requirement. KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),Six months to three years related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to speak effectively before groups of employees of organization.Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common factions and decimals.Ability to compute rate, ratio and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Strong working knowledge of computer, equipment and procedures.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis person will be performing the required duties for completion of installation related tasks for electronic product lines and standard electronic systems.How you will do itCandidates will work a 7:00 – 3:30 shift with a 30-minute lunch break. (40-hours a week plus overtime as required.)Helping with installation of electronic systems, including start up through final testing. Follow verbal and written instruction, read, and understand complex construction blueprints, diagrams and specifications used in installation activities.Carry/move equipment and tools weighing up to 40 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet or more. Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with work. Wear appropriate safety equipment as required, including but not limited to hard hats and work boots. May be required to work alternate shifts or weekends to meet customer installation requirements. Perform other duties as requested.Daily submission of required paperwork.What we look for RequiredTexas Fire Alarm License required.3 to 5 years of commercial fire alarm installation experience.High School DiplomaFollow verbal and written instructions, read, and understand complex construction blueprints, diagrams and specifications used in installation activities.Support sales as needed.Read prints and specs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Demonstrate a high level of customer service.Strong organizational skills, positive attitude, and ability to learn quickly.Safety ConsciousProfessional appearance.

JOIN OUR WAREHOUSE TEAM! Ready to build a career with a company that’s leading the foodservice industry Location: Buda, TX We are hiring for a Fleet Mechanic. Schedule: Monday - Friday 8:00am -5:00pm overtime as needed. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here:https://www.usfoods.com/careers/benefits.html.BASIC PURPOSE Mechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Mechanics will also be responsible for the documentation, completion, and to keep current the maintenance logs for all repairs and parts used daily. The position will be required to perform road rescue as needed.ESSENTIAL DUTIES AND RESPONSIBILITIESTroubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Keep track of assigned repairs by logging in and out of the Maximo system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license and DOT certified is preferred.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed

Overview: Tire Technician – Part-Time – GeorgetownDiscount Tire1104 RIVERY BLVDGEORGETOWN, TX, 78628-3009OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Type of Requisition:RegularClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretPublic Trust/Other Required:NoneJob Family:SCAJob Qualifications:Skills:Codec, Customer Service, Teleconferencing SystemsCertifications:NoneExperience:3 + years of related experienceUS Citizenship Required:YesJob Description:Electronics Technician Maintenance IIISeize your opportunity to make a personal impact as an Electronics Technician Maintenance III supporting Army Futures Command in an Audio/Visual Technician role. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As an Electronics Technician Maintenance III you will help ensure today is safe and tomorrow is smarter. Our work depends on Electronics Technician Maintenance III joining our team to support and sustain video conferencing systems at Army Futures Command in Austin, TXHOW AN ELECTRONICS TECHNICIAN MAINTENANCE III WILL MAKE AN IMPACTProvide programming and field service support to systems that enable a cohesive capability to client assets and video teleconferencing units.Provides operational users with an ability to access and share real time Common Operational Picture (COPs) enabling immediate decision making during real world operations.Forms the backbone that provides the operators with situational awareness for effective execution of missions.Require developmental, testing, and integration support due to a continuously evolving system of systems design maintenance.WHAT YOU’LL NEED TO SUCCEED:Education: BA\BS Degree (will consider other combinations of years of experience and education/certifications in lieu of a degree)Required Experience: 3+ years of related experienceSecurity Clearance Level: SecretRequired Skills and Abilities: Have the ability to read, interpret and modify Crestron programming language and RS232 control utilizing necessary applications, interface processors and be able to retrieve existing code as well as upload new code; ability to interface different system components utilizing appropriate applications in order to configure and update/roll back firmware as necessary; ability to interface with DSP's(Biamp, ClearOne, etc.), microphone arrays, and additional audio components utilizing appropriate applications to modify levels and configurations to get required performance; ability to troubleshoot and fix system behavior failures during start up, shut down, and normal operation; understand various Cisco Codecs configuration and operation; ability to interface Freeport Technology devices in order to configure and update as necessary; ability to connect and modify configurations in Cisco switches (DHCP, DNS, etc.) to keep network traffic active; understand video wall connectivity, configuration, and functionality with ability to identify and resolve reported issues; Develop systems integration programs for Crestron, Extron, QSC, and Biamp systems. Understand and have functional knowledge of Pre and Post Live and Broadcast A/V production utilizing associated equipment needed for ceremonies and events.Location: Army Futures Command, Austin, TX (minimal travel required)GDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidaysThe likely hourly rate for this position is between $33.57 - $45.43. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA TX AustinAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

The pay range per hour is $29.75 - $35.38Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

Overview: Tire Technician – Part-Time – GeorgetownDiscount Tire1104 RIVERY BLVDGEORGETOWN, TX, 78628-3009OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join our winning team and pave the way for a bright future. With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:· Competitive pay.· Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time).· Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.· Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.· Encouraging and collaborative team environment.· Dedication to safety through our Zero Harm policy.· Company vehicle, tools, and equipment provided to complete all jobs.· Scheduling and management support.· JCI Employee discount programs (The Loop by Perk Spot).What you will do· Performs assigned system commissioning using Johnson Controls configuration and commissioning tools.· Troubleshoots and resolves basic HVAC mechanical, electrical, and control problems. · Responds to basic warranty calls.How you will do it· Loads system-level controller software. Performs basic commissioning and system diagnostics from system-level controllers to end devices (i.e., sensors, actuators, etc.) and completes all required commissioning documentation.· Keeps management and JCI contractor or customer informed of job progress and issues.· Calibrates systems requiring basic electronic test equipment. · Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. · Documents change and provide information for as built documentation.· Communicates with the JCI contractor or customer upon arrival and before leaving the work site.· Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look forRequired· Demonstrated technical aptitude.· Able to use hand and power tools (i.e., drills, saws, etc.)· Basic computer skills required.· Attention to detail. · Effective communication and listening skills. · Depending on location, the mounting and termination of low voltage devices may have special licensing requirements. Preferred· Demonstrated knowledge of HVAC systems.Required4+ years of experience

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

Overview: Tire Technician – Part-Time – Bee CaveDiscount Tire3922 RANCH RD 620 SBEE CAVE, TX, 78738-6301OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

Job DescriptionAs a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Fire Suppression systems and product lines as well as similar competitive manufacturers’ product lines.How you will do it:Work with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer or smart phone.Posting appropriate state tagging and reporting tag status to AHJ.Make minor repairs and programming changes to the systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredTexas Fire alarm license and able to obtain and retain any licenses that are required by National, State and Local codes.5 - 10 years' experience for this role documented service experience in fire alarm.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredNICET II certification or higher.#TechHiring

Overview: Tire Technician – Part-Time – TempleDiscount Tire721 SW H K DODGEN LOOPTEMPLE, TX, 76502-1918OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

Job DescriptionSIGN ON BONUS OR RELOCATION POTENTIALWhat you will doResponsible for meeting customer expectations while performing quality inspections.How you will do itPerform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under the direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look forRequired5-10 years documented experience in sprinkler systemsTexas Department of Insurance requires REM-I license for this position.Able to obtain and retain any licenses that are required by National, State and Local codes.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Experience with wet, dry, pre-action, deluge, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level II certification#TechHiring

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 286 rates.Comprehensive benefits package provided by the UA Local 286.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doWe are looking for a skilled journeyman mechanic who has experience with HVAC comfort cooling, air-cooled and water-cooled systems in the industrial market.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.

SIGN ON BONUS OR RELOCATION POTENTIALWhat you will doResponsible for meeting customer expectations while performing quality inspections.How you will do itPerform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under the direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look forRequired5-10 years documented experience in sprinkler systemsAble to obtain and retain any licenses that are required by National, State and Local codes.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Experience with wet, dry, pre-action, deluge, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level II certification

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doUnder general direction, perform preventive maintenance, repair, installation and replacement of HVAC mechanical equipment.Assists branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and following operational processes.Providing Level 1 technical support and assisting with technical development for others.Ensures work is being performed in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics.Properly completes all required project and service documentation.How you will do itAdheres to all Johnson Controls and customer safety standards.Provides safety leadership and instruction to all Technicians.Provides safety awareness and instruction to subcontractors on Johnson Controls work sites.Recognized as a Leader by peers while being a coach and mentor within the branch.Escalation points on technical issues and provides on-the-job training for other techniciansProvides solutions to others on very complex system problems by either troubleshooting or advising how to resolve problemsEscalation points from the branch to the technical resource team.Viewed as an expert in each field by both employees and customers.Assists management with assuring proper field operational disciplines of other Technicians are followed.Regularly provides input on development and training needs of the branch.Assists with the identification of material needs required for service delivery.Assists the Service Manager or Customer Service Agent with identifying and scheduling individuals with the correct skills and knowledge to perform repairs or installation.Communicates with customers upon arrival and before leaving the work site.Ensures high levels of customer satisfaction Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs.Manages assigned work to meet a professional level of execution, on-time and to the customer.satisfactionProvides consultant level services for customers related to building system repairs and enhancements.Ensures ultimate customer satisfaction levels with assigned customers.Conducts self-study (reading, research, and practice) to improve and maintain technical proficiency.Completes all training and certifications as required by the company.What we look forRequiredIn addition to the technical requirements of the given field, Technical Team Leads need experience where strong leadership activities have been demonstrated.Ability to act independently and to coordinate the work of other employees and contractors on a customer site.Effective interpersonal skills to represent the company to customers and other outside contacts.Able to explain technical information to technical and non-technical people.