As a Process Engineer- NDT you will collaborate with internal Quality Management and Business units, as well as develop and continuously improve our NDT systems. You will combine technical experience and demonstrated success working with organizations inside and outside the company as well as leading a team of talented technical individuals.Key Responsibilities:Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s).Be capable of assuming technical responsibility for the NDT facility and staff.Select the method and technique for a specific inspection when needed with a thorough understanding of alternate NDT Methods, and related repair processes.Be capable of Preparing and verifying the adequacy of procedures and work instructions. Write, approve, and teach NDT procedures and work instructions for technical adequacy.Have a general knowledge of other NDT methods and product manufacturing/repair processes and inspection technologies used.Provide for the training, examination and certification of personnel. Conduct NDT for the acceptance of components as needed.Perform Internal and External Audits as needed.Be accountable for the development of personnel and training programs.Be responsible for the continuous training and oversight of Level 2 inspectors.Be responsible for continuous oversight of processes, equipment and inspection area condition.Ensure that all tooling is correct for the inspections required.Be accountable for all actions and maintain ethical behavior in all respects.Basic RequirementsASNT Level 3 Certification in a minimum of one of the following: PT, MT. Must have the ability to obtain ASNT Certification in both Methods within 6 months of start.Must be able to Certify as Level 3 per NAS 410 in both PT and MT within 6 months of start.5 - 10 years working as a Level 3 in an Aerospace setting or equivalent experience.Certification or knowledge of other NDT Methods a Plus.Basic computer and technical writing skills.Experience in Etch a Plus.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to sit and stand for prolonged periods.Working knowledge of production management computer system and other related internal control systems.Take on new duties as assigned.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Description Are you interested in working for a Fortune 500 Company At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and fulfill our customers’ most challenging requirements. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business and is a hallmark of our long-standing tradition.If this sounds like an organization you’d like to be a part of, read on!The National Security Sector at Leidos currently has an exciting opportunity for a seasoned Cloud Engineer who will also serve as a Value Stream Lead (VSL) for the Department of the Air Force Cloudworks program at Lackland AFB, TX. This is a hybrid position where the candidate is authorized to telework two days a week. Candidates must possess a current TS/SCI security clearance in order to be considered.Primary Responsibilities:Manage access to Operations resources (e.g. account accesses or to GitLab repositories). Serve as an Approver in code promotion process. Ensure the Account Management Operations (AMO) team complete help desk tickets as well as sprint tickets from Program Increment (PI) planning. Ability to assess priority levels of new tickets across all three networks. Facilitate weekly backlog refinement meeting with Scrum Master. Provide guidance to AMO team on ticket resolution. Submit Weekly Activity Reports to AMO Lead. Attend Technical Fit meetings with new customers as needed. Assist in onboarding new Operations team members. Attend Scrum of Scrums meeting every three weeks to report status of sprint tickets. Plan/facilitate Operations portion of week-long PI planning events every quarter.What Sets You Apart (Required Qualifications):TS/SCI security clearance on day 1Bachelor’s degree in Computer Science, Software/Electrical Engineering. Additional experience may be considered in lieu of degreeIAT-III Certification10+ years of relevant experience.Experience in Kanban and ScrumExperience in PythonExperience writing and deploying AWS Cloud Formation templatesExperience writing and troubleshooting AWS IAM permissions and boundariesExperience with Risk Management Framework (RMF)Experience with Atlassian tools (Jira and Confluence)Ability to work a hybrid schedule. Preferred Qualifications:Ability to collaborate with multiple teamsExperience designing systems from inception to large scale 24-hour worldwide operationsExperience deploying accounts on multiple classification systemsIf you feel you qualify and are ready to make a huge impact toward the defense of our country, send in your resume! EIO2024Original Posting Date:2024-07-24While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

WHAT YOU'LL DO: Active membership in the RTE Community of Practice helping the organization to maintain alignment, learn new techniques, and improve technical and quality practices. Assists the ART to relentlessly improve through the facilitation of ART Retrospectives as often as needed, to improve backlog management, ART reviews, sprint reviews, or ART coordination and higher-level function. Work with RTE community to determine ways to help ARTs across the company improve cross-train and solution group coordination and collaboration. Facilitates the coordinated preparation and execution of release planning for the ART. Will have Scrum Masters reporting to them directly. Facilitates the coordination of initiatives that cross multiple release trains. Coaches the Agile release train to improve in the implementation of Agile processes, practices, and mindset. The RTE may be called upon to lead projects that impact the ART but may not require work being added to team backlogs. Assisting in the execution of product vision. Support teams commitments and continuous growth. Empower teams to be owners of their products and processes WHO YOU ARE: Bachelor's Degree + 4 years' experience OR 8 years relevant experience. 4 years' experience as Release Train Engineer, Scrum Master, or Agile Project/Program Manager Must have experience with collaboration and influence with Director level stakeholders Must understand the difference between being Agile and doing Agile Understands Lean thinking and implementation Servant leader and strong communicator with strong interpersonal skills who can: Listen and support teams in problem-identification and decision making Encourage an environment that values mutual respect, openness, and courage Persuade by influence rather than authority Understand and empathize with others Think beyond day-to-day activities Strong technical aptitude and experience leading teams in delivering quality software. Experience applying Lean Thinking and Systems Thinking in large organizations. Experience with Lean Portfolio Management facilitation for program, portfolio, or executive level Experience working in an Agile organization using Scrum, XP, Kanban, Scaled Agile Framework (SAFe), or other scaling model Desirable: Agile Certification (A-CSM, PSM, or PMI-ACP) Project Management Professional (PMP) Advanced degree in industry related subject SAFe Program Consultant (SPC) or other SAFe certifications preferred USD 106,800.00 - 178,000.00 per yearCompensation:Compensation includes a base salary of $106,800.00 - $178,000.00. The base salary may vary within the anticipated base pay range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include an incentive program.Benefits:The Company offers eligible employees the flexibility to take as much vacation with pay as they deem consistent with their duties, the company's needs, and its obligations; seven paid holidays throughout the calendar year; and up to 160 hours of paid wellness annually for their own wellness or that of family members. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, parental leave, and COVID-19 vaccination leave.About Cox AutomotiveAt Cox Automotive, people of every background are driven by their passion for mobility, innovation and community. We transform the way the world buys, sells, owns and uses cars, accelerating the industry with global powerhouse brands like Autotrader, Kelley Blue Book, Manheim and more. What's more, we do it all with an emphasis on employee growth and happiness. Drive your future forward and join Cox Automotive today!About CoxCox empowers employees to build a better future and has been doing so for over 120 years. With exciting investments and innovations across transportation, communications, cleantech and healthcare, our family of businesses - which includes Cox Automotive and Cox Communications - is forging a better future for us all. Ready to make your mark Join us today!Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page .Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Statement to ALL Third-Party Agencies and Similar Organizations: Cox accepts resumes only from agencies with which we formally engage their services. Please do not forward resumes to our applicant tracking system, Cox employees, Cox hiring manager, or send to any Cox facility. Cox is not responsible for any fees or charges associated with unsolicited resumes.

Build an Aviation Career You're Proud OfExplore a career where you're challenged and have access to exciting engineering projects that stretch your talents. You'll design and create new systems and technologies to help solve complex aviation problems. Our expert team and supportive leaders give you the trust and independence to do your best work.As a Special Process Engineer Paint seal and adhesive your will design, test, and implement advanced technologies to improve aircraft performance, safety, and reliability, so we continue to deliver excellent aviation solutions. You'll collaborate with other departments to ensure that our products and services meet the highest industry standards.Responsibilities:Accountable for team response on flight/product safety critical parts and processesLiaison with Enterprise Manufacturing sites regarding component repairs, inspection and complianceDrive best practice and business improvement opportunities through an Enterprise Network of Aerospace Professionals.Focal for multi-discipline OEM technical reviews, CAR actionsFocal for Repair Development project executionsFocal for Process Engineering Enterprise project support / compliance audits. Support special projects which may involve travel. Process Control and ImprovementAnalyzes, develops and recommends methods to meet production requirements, improve economy and quality, and reduce turn-around-times for products and/or processes with supporting cost analysis.Establishes, analyzes, and acts upon measures of performance related to processes.Investigates and initiates corrective action of problems and deficiencies relating to equipment and processes to reduce variation and improve reliability.Coordinates and interacts with the outside resources including contractors, equipment vendors, and supply vendors for process support, improvement, or repair development.Remains current with state-of the-art technologies and processes.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Education Requirements:University degree in Chemistry, mechanical or chemical engineering; or equivalent.Degree in Materials Engineering.Preferred SkillsAbility to develop a business case proposal for new productivity improvement technologies working with Operations and contractors for justifications, budget & timelineAbility to prepare a Technical Specification and Cost Benefit Analysis for procurement of capital equipment. Liaises with management in the procurement processAbility to define a plan for local Engineering to approve MRO repairs and equipment to Airworthiness RequirementsExperience in a leadership position Experience developing repairs with Aerospace OEMEffective time management and organizational skillsEffectively communicate in a professional mannerEffective at planning, team building, performing analytical evaluations, & decision making Required Skills:Working knowledge of 14 CFR 21, 43, 45, 121, 145 and Industry standards (AC7108, AC7109, AC7200, etc) for Chemical Process - Stripping, Cleaning, Plating, Painting and SealantsWorking knowledge of PC's in the current company operating system environment.Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Strong project management skills.Thorough knowledge of company process, company instruction and rework process instruction manuals.Thorough knowledge of aerospace materials and processes.Experience in an aerospace or manufacturing process engineering environment.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Work with the latest technologies and techniques in the aviation industry to source materials, manage inventory, and coordinate logistics. You'll ensure we have what we need to service our customers.As a Service Engineer (LEAP) you will provide interpretation and clarification of overhaul data; produces material review board, temporary overhaul data requirement, unit build standards, and engineering bill of materials documentation to support operational repair and overhaul processes.What you'll do:Recognize and understand flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participate in proactive risk analysis of flight/product safety critical parts and processes.Recognize and understand the Just Culture policy.Resolve technical problems beyond the scope of the product unit operations group; liaises with manufacturers.Perform engine and accessory test, performance analysis and troubleshooting.Prepare detailed work instructions for operations personnel, outside of routine overhaul procedures.Review service bulletins and manual changes and incorporates amendments into production.Review warranty claims and advises management on the disposition of assigned items.Provide written or verbal technical advice for customers; produces reports relating to product serviceability, repair summaries, warranty, failure analysis or product configuration.Provide technical support during the implementation of new processes; specifies tools and test equipment required; assists in training on the overhaul and test methods.Advise on repair and improvement schemes together with feasibility studies.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Education Requirements:Bachelor's degree in mechanical, Aerospace, Industrial, and Metallurgical Engineering or equivalent.Position Requirements:Good understanding of manufacturing methods, shop equipment and machining processes.Ability to read, understand and interpret blueprints, engine technical data and other maintenance program requirements and/or procedures from customers, OEMs, vendors/suppliers and regulatory agencies.Working knowledge of production management computer systems.Strong planning, organizational, analytical, leadership, decision making, oral and written communication skills.Thorough knowledge of company instruction, company process, temporary overhaul data revision and original equipment manufacturing manuals.In jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.Working knowledge of FAA 14 CFAR PART.121 and 145 regulations.Ability to represent the company with integrity at industry events.Experience in an aerospace or manufacturing environment.Preferred Requirements:Working knowledge of precision measuring instruments.Working knowledge of gas turbine engine and/or accessory theory and performance analysis.Working knowledge of PC's in the current company operating system environment.Working knowledge of production management computer systems.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

Snelling Staffing has an Immediate need for experienced Insurance Verification Specialists to join a medical clinic near San Pedro and 281. You will be responsible for verifying patients' insurance information to ensure accurate billing and reimbursement for healthcare services. This role involves contacting insurance companies, confirming coverage details and communicating with patients to gather necessary information.
Verifying insurance coverage of each patient Handling payments for services not covered by insurance Explaining coverages to patients Obtaining referrals for patients when they are not covered Updating patient information/keeping records Filling out the documentation required for billing
Benefits: Medical Dental Vision Paid Weekly Monday-Friday 8:00 AM-5:00 PM
Qualifications: High school diploma or GED Medical insurance verification: 2 years (Required) Medical billing: 2 years (Preferred) Previous customer service via the phone Previous billing experience (Preferred) Familiarity with medical terminology (Preferred) Work experience with insurance companies (Preferred) Excellent communication and interpersonal skills. Detail-oriented with strong organizational abilities

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Snelling Staffing is looking for an Administrative Sales Assistant to join a fast growing company near the airport. The ideal candidate for the position should be customer-focused, detail-oriented, organized and possess an entrepreneurial spirit. Experience working in a brokerage firm with HEB or any other large retailer as a liaison would be a significant advantage.
Pay rate: $45,000+ annually - depending on experience.
Key Responsibilities: Assist client in offering their top products to the customer Manage client accounts to access product value, marketing techniques, retail value, promotions and retail store placement Enter a high volume of data from multiple client sources into the customer portal New item setup, price changes, coupons, and promotions Manage day-to-day relationships Request, receive, and distribute client samples to customer Create and manage project cost, sales and data reports Prepare CEO for sales meetings and conduct appropriate follow-ups Prepare PowerPoint decks to include client information, products, and pricing Communicate product shipments and deliveries Email/phone inquiries and requests Project trackers and calendars Maintain internal database
Benefits: Health insurance 75% of the premium for the employee PTO Paid Holidays
Qualifications: Associate’s / Bachelor’s Degree or Equivalent Experience Microsoft Office Proficiency: Excel, Word, PowerPoint, Adobe Acrobat, Access CRM Software Experience: Sales Force, Monday.com Proficient mathematical skills Effectively handle multiple projects simultaneously in a deadline-driven environment Complete multiple projects timely as scheduled Organize and prioritize daily duties to meet needs Ability to problem solve and devise creative solutions Perform under tight deadlines while maintaining professionalism and enthusiasm Collaborate with other team members Analytical ability to develop and implement improvements or recommendations