Gilmer, TX 75644 • (5.1 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (5.1 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (5.1 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (5.1 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Longview, TX 75605 • (11.5 miles) • Full Time • 10/15/2026

This position requires extensive travel, with assignments lasting multiple weeks at a time.Daily per diem and hotel accommodations are provided during travel.About the Role:You will help protect critical infrastructure by monitoring, testing, and maintaining corrosion control systems. Depending on your experience level, you may assist with basic field testing or lead advanced inspections, troubleshooting, and program management. this position involvesfieldwork, travel, and working outdoors in varying conditions.Minimum Qualifications:Ability to follow detailed instructions.Good communication skills and ability to work collaboratively in a team environment.Physical ability to handle tools and equipment, including lifting and standing for extended periods.Willingness to work outside and the

Longview, TX 75602 • (20 miles) • Full Time • 10/15/2026

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and ext

Longview, TX • (13.1 miles) • Full Time • 10/13/2026

DescriptionThis Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602.Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and sel

Tyler, TX 75701 • (35.1 miles) • Full Time • 10/8/2026

We are seeking a skilled and dedicated Industrial Maintenance Mechanic to join our team in Tyler, TX, 75701. In this role, you will play a crucial part in ensuring the smooth operation of our manufacturing facility by performing maintenance and repairs on a variety of industrial equipment. If you have a passion for problem-solving and a knack for mechanical systems, we want to hear from you! Responsibilities Perform routine maintenance on machinery and equipment to ensure optimal performance.Troubleshoot and diagnose mechanical issues, providing timely and effective solutions.Conduct repairs on various types of industrial equipment, including conveyors, pumps, and motors.Maintain accurate records of maintenance activities and repairs performed.Collaborate with other team members to improve

Kilgore, TX 75662 • (20.9 miles) • Full Time • 10/7/2026

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world’s biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact.What does that mean for you? You’ll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn’t part of our business. It’s the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world’s biggest and best-loved brands. You’ll learn new ways of working, with automation and new technology that’ll help you ge

Tyler, TX 75707 • (31.4 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Marshall, TX 75672 • (36.8 miles) • Full Time • 10/5/2026

American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 450+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 1st Shift Millwright/Industrial Maintenance Tech (Manufacturing)role in our Marshall, Texasfacility.JOB SUMMARYThe Millwright/Industrial Maintenance Tech will operate in a safe and efficient manner of troubleshooting and repairing equipment and machinery. The primary duties include:MAINTENANCEPerforms scheduled maintenance repairs of production equipment and provides emergency/unscheduled repairs of production equipment during production. Prepares a

Henderson, TX 75652 • (32.5 miles) • Full Time • 9/30/2026

This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility.Responsibilities include but not limited to:Test electrical systems and circuits in electrical wiring, equipment, or fixturesInspect electrical systems, equipment, or components to identify hazards, defects, or repairTroubleshoot, program, and upgrade Programmable Logic Controllers (PLC)Work with vendors to identify needed parts and recommend to SupervisorUnderstand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematicsProgram AC & DC variable speed driversUpdate power distribution system, MCC, and switch gears

Tyler, TX 75701 • (35.1 miles) • Full Time • 9/27/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Tyler, TX 75708 • (26.9 miles) • Full Time • 9/21/2026

Join us at Cascade Manufacturing Company as a full-timeTRUSS ASSEMBLER at our manufacturing plant in Tyler, TX, and take your career to new heights! With competitive pay starting at $19.00 per hour, this on-site position offers the chance to learn or enhance your construction skills. You can enjoy great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Flexible Spending Accounts, and Paid Time Off.Who we are:Cascade Mfg Co, established in 1953, is a leading manufacturer of wood and cold-formed steel trusses serving various markets in the Midwest, South, Southeastern US, and beyond. With manufacturing facilities strategically located in Cascade, IA, Tyler, TX, and East Dublin GA for steel trusses, and Cascade, IA and Pleasantville, IA for wood trusses, we ensure efficient se

Longview, TX • (13.1 miles) • Full Time • 10/15/2026

Role: Production ManagerLocation: Longview, TXSalary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k.Summary:This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals.The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains.In addition, the role supports financial planning activ

Marshall, TX 75670 • (27.4 miles) • Full Time • 10/15/2026

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector.We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us.Make Your Mark at Prysmian Group - Join UsTeam Overview and Job Responsibilities:What You'll Do:The

Marshall, TX • (32 miles) • Full Time • 10/15/2026

CDR ProSource is seeking dedicated Bilingual Production Worker to join our dynamic team in a galvanizing shop in Waskom, TX. This position is ideal for a reliable, hands-on individual who can support production processes and work effectively in a fast-paced industrial environment. The ideal candidate is motivated, dependable, and committed to maintaining safety and quality standards. Job Details Job Type: Full-Time Location: Waskom, TX Pay Rate: $14 per hour Schedule: Monday – Friday, 1st Shift (6:00 AM – 5:30 PM) Key ResponsibilitiesUtilize hand tools for various assembly and fabrication tasks as requiredCollaborate with team members to meet production goals and deadlinesReceive and move heavy metal parts throughout the facilityClean and prepare parts by removing corrosion, rust, and othe

Longview, TX 75601 • (14.9 miles) • Full Time • 10/15/2026

Outside Plant Tech IJob Type: Full TimeDUTIES AND RESPONSIBILITIES:• Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping.• Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards.• Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground• Help perform fiber tests with OTDR’s, visible light source and meters.• Assist in the installation of fiber optic communication equipment and Inside plant patch panels.• Install aerial and underground enclosures and other fiber related telecom equipment.• Must

Longview, TX 75605 • (11.5 miles) • Full Time • 10/15/2026

W&B Service Company has an excellent opportunity for a Transport Refrigeration Technician. We are the largest transport refrigeration dealer of Carrier Transicold, a world leader in Truck, Trailer and rail refrigeration systems. We are also the nation’s largest full service Hyundai Translead trailer dealer. We have 21 facilities throughout the Southwest, including Texas, Arkansas, Louisiana and Oklahoma.Duties will include:Perform diagnostics and repair starting and charging system, cooling and re-charge, and electrical including common fault codes. Repairs include performing leak detection procedures, compressor replacements, soldering refrigerant lines, evaporator/condenser replacements and front & rear main engine seal replacements.Perform repair and maintenance on reefer units in accor

Longview, TX 75604 • (12 miles) • Full Time • 10/15/2026

Job SummaryEntry-level Quality Inspector training for performing basic in-process and final inspections under supervision while developing knowledge of AAR, FRA, customer, and company requirements.Job DutiesInspection ActivitiesTrain to Perform assigned in-process inspections.Train to Perform assigned final inspections.Train to Verify work completed meets work order requirements.Train to Verify required repair procedures were followed.Train to Inspect repaired railcars for obvious defects and non-conformances.Train to Complete inspection documentation accurately and legibly.Train to Verify required forms are complete before railcar release.Quality DocumentationTrain to Complete inspection reports.Train to Record defects and discrepancies.Train to Maintain inspection records.Train to Docume

Kilgore, TX 75662 • (20.9 miles) • Full Time • 10/15/2026

Description: POSITION SUMMARYPrograms, sets up, and operates CNC machinery to manufacture complex precision parts for drilling and geotechnical equipment, ensuring dimensional accuracy and quality.ESSENTIAL DUTIES & RESPONSIBILITIESProgram CNC machines using G-code and/or CAM softwarePerform complex setups, including fixturing, tooling selection, and offsetsMachine close-tolerance parts from steel, aluminum, and specialty alloysInspect finished parts to blueprint specificationsTroubleshoot machining issues and implement corrective actionsMentor CNC Operators and AssistantsMaintain accurate production and inspection recordsRequirements: REQUIRED QUALIFICATIONSHigh school diploma or GED3+ years CNC machining experienceProficiency in G-code programmingAbility to work to tight tolerances (±0.0

Hallsville, TX 75650 • (21.9 miles) • Full Time • 10/15/2026

GrayWolf is seeking a Project Controls Engineer in Hallsville, TX - This is an On-Site Role with Competitive Pay, Paid Time Off, Per Diem Eligible >60-milesGrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a

Longview, TX • (13.1 miles) • Full Time • 10/14/2026

WHAT IS ON OFFERAlfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s.ABOUT USAlfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries.We have honed & carefully crafted ou

Tyler, TX • (35.7 miles) • Full Time • 10/14/2026

EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visitwww.eyecare-partners.com.Job Title: Quality Assurance Supervisor- ClaimsMUST LIVE IN ONE OF OUR 18 States: Missouri, Florida, Kansas, Kentucky, Pennsylvania, Virginia, New Jersey, Texas, Minnesota, Michigan, Oklahoma, Alabama, North Carolina, Georgia, Illinois, Ohio, Indiana, ArizonaJob SummaryThe Supervisor for RCM QA Charge Posting

Longview, TX 75601 • (14.9 miles) • Full Time • 10/13/2026

LEGIT PRODUCTIONS LLCTexas Division PIT Crew (Production Intake Team)About the PIT CrewThe Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects.As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases.This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater responsibilities as the organization develops.Core Responsibilities

Hughes Springs, TX 75656 • (28.3 miles) • Full Time • 10/13/2026

QA Tech Responsibilities:Monitoring Haccp, GMP’s compliance. Follow up about any deficiencies with the manager. Add a hold tag to rejected products/ inspect rejected products make sure everything was corrected. Making sure standards are being met.QA Tech Skills:Intermediate computer skills. Verbal and written communication, Be able to stand in a hot or cold environment. enforce policies and programs. attention to detail, multitasking, knowledge of quality standards.

Mount Pleasant, TX 75455 • (37.4 miles) • Full Time • 10/12/2026

Job description At Mid America Pet Food, our vision is to enrich the lives of pet families, and we believe that starts with our own team. We foster a positive and inviting atmosphere where employees feel valued and appreciated, making MAPF a great place to build your career.As a full-time team member, you'll enjoy a generous benefits package, includingemployer-paid health insurance,100% coverage of qualifying dependents,paid time off (PTO), aFlexible Spending Account (FSA),401k matching, and opportunities forovertime.We are currently seeking a dedicated Production Tech to contribute to maintaining a clean, professional, and safe working environment. In this multi-faceted role, you will perform routine and non-routine work as directed, always adhering to company policy, procedures, and valu

Tyler, TX • (35.7 miles) • Full Time • 10/11/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Check out our many videos to learn more!http://

Tyler, TX 75702 • (33.8 miles) • Full Time • 10/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Tyler, TX • (35.7 miles) • Full Time • 10/10/2026

Company Description Location:Tyler, TXPay:Pay Rate $30.71/hourShift:5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship.Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment to produ

Longview, TX 75602 • (20 miles) • Full Time • 10/10/2026

We are hiring immediately for a full time QUALITY ASSURANCE TECHNICIAN position.Location: Fresh & Ready FG TX - 2002 East Cotton Street, Longview, TX 75602. Note: online applications accepted only.Schedule: Full time schedule. Days may vary, 6:00 am to 4:30 pm. Availability to work weekends required. Further details upon interview.Requirement: Previous quality assurance, lot coding, and food quality experience required.Fixed Pay Rate: $15.00 per hour.*Internal Employee Referral Bonus AvailablePlease note that employees in this role will work in a temperature-controlled environment with exposure to cold conditions for extended periods of time.We Make Applying Easy!Just text JOB to 75000 & search for the requisition ID number1570694.The advertised program is a conversational recruiting assis

Kilgore, TX 75662 • (20.9 miles) • Full Time • 10/8/2026

Revolution is now hiring for an Extrusion Manager position in Kilgore, TX. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.RESPONSIBILITIES/ DUTIES:Directs and coordinates activities of production department(s) in processing materials or manufacturing products in industrial organization by performing the following duties personally or through subordinate supervisors.Analyzes production schedule to estimate worker hours and create machining schedules that meet both internal and external customer needs.Reviews production schedules to ascertain product data such as types, quantities and specifications of products and scheduled delivery dates in order to plan department operations and establishes priorities and sequences for manufac

Winnsboro, TX • (30.7 miles) • Full Time • 10/8/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Longview, TX • (13.1 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Longview, TX • (13.1 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Kilgore, TX 75662 • (20.9 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Tyler, TX 75706-6031 • (35.7 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Longview, TX • (13.1 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX 75703 • (40.3 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Longview, TX 75604 • (12 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/

Longview, TX 75602 • (20 miles) • Full Time • 10/2/2026

Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient preparation and ti