Gilmer, TX 75644 • (0.3 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (0.3 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (0.3 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (0.3 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Kilgore, TX 75662 • (24.6 miles) • Full Time • 10/7/2026

We are seeking a driven, execution-focused New Product Introduction (NPI) Manufacturing Engineer to help bridge product design and manufacturability early in the development lifecycle. This role supports accelerated time-to-market, reduces cost variance, and ensures a smooth transition from concept and prototype builds into full-scale production.The NPI Engineer operates at the intersection of design engineering and manufacturing, supporting product industrialization efforts. This role helps translate design intent into scalable manufacturing processes, identifies risks, contributes to cost alignment, and supports production readiness. The ideal candidate brings 3D CAD/solid modeling capability, supports rapid prototyping through 3D printing, and assists in developing 3D fixtures to enable

Longview, TX • (18.2 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Kilgore, TX 75662 • (24.6 miles) • Full Time • 10/7/2026

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world’s biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact.What does that mean for you? You’ll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn’t part of our business. It’s the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world’s biggest and best-loved brands. You’ll learn new ways of working, with automation and new technology that’ll help you ge

Winnsboro, TX • (25.3 miles) • Full Time • 10/7/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Tyler, TX • (35.4 miles) • Full Time • 10/7/2026

Company Description Tyler Pipe is hiring Foundry Production Workers to perform various job duties based on their assigned production area. These duties include operating, monitoring, controlling, maintaining, cleaning machinery used in the process of producing cast iron pipe and fittings. Most common job assignments for new hires are Core Machine Operator, Casting Processor, or Pipe Processor.Job Description Foundry Production Worker (Actual job will be assigned at New Hire Orientation and is based on the production needs at that time.)Location:Tyler, TXPay:Pay Rage $22.44 - $27.20/hourShift:Most openings are 2nd ShiftWhat You’ll Do:Complete the job duties related to their assigned work area such as: Operator machinery to make fitting cores.Grind fittings to remove excess iron and prepare

Longview, TX • (18.2 miles) • Full Time • 10/6/2026

Join Our Team as a Production Helper at THE BUTCHER SHOP!Are you ready to roll up your sleeves and be part of a hardworking, dedicated team? THE BUTCHER SHOP in Longview, TX, is looking for a motivated Production Helper to join our crew! If you thrive in a fast-paced environment and enjoy contributing to a team that values quality and craftsmanship, this could be the perfect opportunity for you.What You'll Be Doing:As a Production Helper, you’ll play a key role in ensuring our operations run smoothly. Your responsibilities will include:- Assisting with daily production tasks to maintain efficiency.- Supporting team members in various stages of production.- Following all safety and quality guidelines to uphold our high standards.- Maintaining a clean and organized workspace.What We're Looki

Tyler, TX 75707 • (32.3 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Longview, TX • (18.2 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Kilgore, TX 75662 • (24.6 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Tyler, TX 75706-6031 • (35.4 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Marshall, TX 75672 • (42 miles) • Full Time • 10/5/2026

American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 450+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 1st Shift Millwright/Industrial Maintenance Tech (Manufacturing)role in our Marshall, Texasfacility.JOB SUMMARYThe Millwright/Industrial Maintenance Tech will operate in a safe and efficient manner of troubleshooting and repairing equipment and machinery. The primary duties include:MAINTENANCEPerforms scheduled maintenance repairs of production equipment and provides emergency/unscheduled repairs of production equipment during production. Prepares a

Longview, TX • (18.2 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Longview, TX • (18.2 miles) • Full Time • 10/3/2026

DescriptionThis mechanic position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy equipment and/or related equipment or components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals.Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project.The incumbent in this positi

Tyler, TX 75703 • (40.5 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Longview, TX 75601 • (20.1 miles) • Full Time • 10/3/2026

Overview We are hiring for several precision machining openings with local manufacturers:Manual MachinistCNC Mill and Lathe MachinistsCNC ProgrammersIf you take pride in tight tolerances and quality parts, we want to hear from you.Mill and Lathe Machinist ResponsibilitiesSet up and run CNC and manual mills and lathes to make precision parts.Set up jobs, edit programs, and prove them out on conversational controls.Choose tooling, set offsets, and set up fixtures.Adjust feeds, speeds, and offsets to hold tolerance.CNC Programmer ResponsibilitiesWrite, edit, and optimize CNC programs for machining centers and lathes.Program with conversational controls, G-code, and CAM software.Prove out new programs and first-article parts.Reduce cycle times and improve tooling strategies.Support machinists

Longview, TX 75604 • (16.5 miles) • Full Time • 10/2/2026

Position summary:Assists the Plant Manager with managing and coordinating employees engaged in railcar (tank, hopper, and other freight cars) repair, cleaning, and coating/paint activities to ensure optimum efficiency and financial welfare of operations. Will be responsible for ensuring that management and employees both comply and meet safety, quality, and company service goalsResponsibilities:· Ensures railcar maintenance (repair, cleaning, coating/paint) activities meet AAR requirements, safety and quality standards, customer demands, and production targets.· Reviews and assesses the plant operation, workload, scheduled car flow and back log hours and ensures that location assets (e.g., people, processes, materials, measures, equipment, and conditions) are in place to meet efficiencies,

Longview, TX 75604 • (16.5 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/

Daingerfield, TX 75638 • (23.4 miles) • Full Time • 10/2/2026

The Bullpen Catcher plays a vital role in supporting the training and development of athletes across professional, collegiate, and youth levels. This individual is responsible for assisting with on-field activities, providing athlete support, coordinating sessions, and maintaining a high-performance environment. The role offers valuable exposure to performance training and player development, with opportunities for advancement into coaching and administrative positions.ResponsibilitiesAssist with daily training setup, flow, and breakdown in the bullpenSupport professional, collegiate, and youth athletes during warm-ups and drillsTrack athlete throwing performance and development dataCoordinate session schedules and communicate with athletesMaintain a clean, organized, and efficient bullpen

Longview, TX 75602 • (25.3 miles) • Full Time • 10/2/2026

Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient preparation and ti

Tyler, TX 75706 • (27.7 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Longview, TX • (18.2 miles) • Full Time • 10/1/2026

The Materials Engineer works in conjunction with the Engineering Manager or Sr. level Engineer. The Materials Engineer is responsible for maintaining existing material designs and may work on the development, validation, release and launch of new materials, working in a cross-functional team environment. Responsibilities also include: continuous improvement of current production products/processes, assistance with manufacturing process improvement, customer concerns, warranty analysis, and supplier development. Main material focus is with rubber compounds and process chemicals for metal preparation for rubber bonding.What You’ll Do:Promote the STEMCO / Enpro Culture by exhibiting the five principles of exemplary leadership: Modeling the Way, Inspiring a Shared Vision, Enabling Others to Ac

Lone Star, TX 75668 • (19.5 miles) • Full Time • 10/1/2026

Position OverviewA&E Machine Shop, Inc. is seeking an experienced CNC Machinist / Programmer to join our machining team.This is not an operator-only position. Candidates must have hands-on experience programming CNC machines in addition to setting up and operating them.The ideal candidate will be capable of taking a machining job from blueprint to finished component, including determining the machining process, programming the CNC machine, setting up tooling and work holding, establishing speeds and feeds, operating the machine, troubleshooting, and inspecting the finished work.We are looking for an experienced, hands-on machinist who can work independently and confidently program CNC mills and/or lathes to produce accurate, high-quality work.Key ResponsibilitiesProgram CNC mills and/or la

Longview, TX 75602 • (25.3 miles) • Full Time • 10/1/2026

Salary: $70,000 - $75,000 / yearOther Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link

Scottsville, TX 75688 • (43.3 miles) • Full Time • 10/1/2026

Prysmian is the global leader in energy and telecom cable systems. Every year, we manufacture thousands of miles of underground and submarine cables for power transmission and distribution, as well as medium and low voltage cables for construction and infrastructure. We also produce a full range of optical fibers, copper cables, and connectivity solutions for voice, video, and data transmission. With over 30,000 employees across 50+ countries, Prysmian is transforming how the world connects and powers its future. At every level, our people are empowered to make an impact. Join us and Make Your Mark.Lead Transformation at a Global Industry Leader:Prysmian, the world’s largest manufacturer of energy and telecom cables, is seeking a seasoned executive to lead our largest manufacturing facilit

Hawkins, TX 75765 • (18 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Henderson, TX 75652 • (36.9 miles) • Full Time • 9/30/2026

This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility.Responsibilities include but not limited to:Test electrical systems and circuits in electrical wiring, equipment, or fixturesInspect electrical systems, equipment, or components to identify hazards, defects, or repairTroubleshoot, program, and upgrade Programmable Logic Controllers (PLC)Work with vendors to identify needed parts and recommend to SupervisorUnderstand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematicsProgram AC & DC variable speed driversUpdate power distribution system, MCC, and switch gears

Marshall, TX 75670 • (32.5 miles) • Full Time • 9/29/2026

Principal Duties & Responsibilities:Prysmian is seeking a Production Supervisor to lead manufacturing operations on an assigned shift in our Marshall, TX facility. This role is responsible for leading hourly production employees, driving safety, quality, productivity, and delivery performance while developing a high-performing team culture. This position is also responsible for effectively managing cross-functional relationships with other departments to support effective use of manpower, materials, and equipment, as well as productivity improvement initiatives.This position leads a team of approximately 27 employees on our 2nd shift (3:00 PM - 11:00 PM). The ideal candidate enjoys being on the manufacturing floor, coaching employees, solving problems, and driving safety, quality, and prod

Pittsburg, TX 75686 • (16.4 miles) • Full Time • 9/27/2026

Title: Quality Assurance Lead Location: Pittsburgh, PA Team Dynamic: working within a larger team of data analysts, business analysts, developers, management team. Roles and Responsibilities: • Lead quality engineering and testing for data?driven regulatory reporting applications. • Validate data accuracy and completeness across source?to?target data flows and reports. • Design and execute test strategies covering functional, regression, and data reconciliation testing. • Partner with technology and business stakeholders to ensure regulatory requirements are met. • Oversee test execution, defect analysis, and root?cause identification. • Own testing documentation including scope, strategy, execution results, and delivery artifacts. Must Have Technical Skills: • 5–8 years of experience in d

Henderson, TX • (40.6 miles) • Full Time • 9/27/2026

Description: POSITION SUMMARYThe Foreman of a crew is responsible for overseeing the construction, maintenance and operation of electrical systems, to ensure assigned projects are completed in accordance with design, budget, schedule and safety considerations.Reasonable Accommodations StatementTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.Requirements: ESSENTIAL FUNCTIONSProvide leadership and direction to crews to ensure safe, efficient, and quality operations.Work with GF in estimating worker requirements, equipment and material, anddevelop “look ahead” schedules.Ensure crew follows GF’s schedule of activi

Tyler, TX 75701 • (34.9 miles) • Full Time • 9/27/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Kilgore, TX 75662 • (24.6 miles) • Full Time • 9/26/2026

***This job has preference to qualified local job seekers within 60 miles of our Axis Kilgore, TX facility.Reporting to Operations management, the Pumping Foreman leads field pumping operations and directs assigned crew members in the safe and efficient rig-up, operation, maintenance, movement, and rig-down of pumping equipment, tools, and related assets at the shop, yard, and customer locations. This position serves as a field-level leader responsible for coordinating job execution, verifying equipment readiness and pressure-control activities, communicating with customers and other service lines when designated, and coaching Pump Operators and new employees on safe work practices, job procedures, equipment operation, and documentation requirements.Essential Duties and ResponsibilitiesThe

Kilgore, TX 75662 • (24.6 miles) • Full Time • 9/26/2026

Revolution is now hiring a experienced Printing Press Operator in Kilgore, TX. This is a 12-hour night shift schedule. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.Work responsibly in a safe manner, following all safe operating procedures and posted requirements.Follow work guidelines and adhere to all company policies.Sustain productivity and quality standards.Handle products according to customer specifications and the company's production standards.Stage printed rolls in conversionLoad/Unload ink chambers and trays from the machine.Set/Adjust impression, registration, and web guide.Responsible for all machine adjustments and job set-ups.Handle and store wastewater and all inks properly.Observe rolls for splices and changes

Quitman, TX • (29.3 miles) • Full Time • 9/26/2026

Join Our Team as a Manufacturing Production Employee!Are you ready to bring your skills to a dynamic and growing company? Amphora Nutritional Manufacturing, located in Quitman, TX, is looking for a dedicated and detail-oriented Manufacturing Production Employee to join our team. If you have at least one year of experience and are eager to contribute to a company that values quality and teamwork, we’d love to hear from you!About Amphora Nutritional ManufacturingAt Amphora Nutritional Manufacturing, we pride ourselves on producing high-quality nutritional products that make a difference in people’s lives. Our team is passionate about excellence, and we work together in a supportive and collaborative environment to ensure every product meets our high standards.What You’ll DoAs a Manufacturing

Mount Pleasant, TX • (29.7 miles) • Full Time • 9/26/2026

Department: QCPosition Title: Quality Control TechnicianShift: 2nd (3:00pm - 11:00pm)Open Date: 09/21/26Close Date: 09/28/26 @ 8amSummaryThe Quality Control Technician is responsible for ensuring NWF’s standards of quality and safety on all finished products.Essential FunctionsEvaluates finished products for quality and acceptability. Perform all necessary analysis as required, and according to the product specification.Communicates product quality issues to Production Supervisors, Production Managers, QC Manager & Supervisor and shipping and customer service staff.Logs all analysis test results and batch information in the I-Series (AS400) & maintains analysis records and documents necessary for documentation compliance.Monitors line equipment for functionality, safety, and cleanliness.Ch

Henderson, TX • (40.6 miles) • Full Time • 9/24/2026

US Industrial Sourcing is looking for a skilled Machinist to operate a variety of machines to perform assigned tasks. Be able to produce or repair precision parts using both manual and automated equipment. The hours are Monday through Friday 7:30 am to 4:15 pm and Saturdays as needed. Must have a good work ethic and not need to be under direct supervision. You will need to be able to pass a drug test along with random tests if hired. Salary based on experience.ResponsibilitiesReview samples, drawings or instructions to understand specifications of outputPlan the sequence of necessary actions for the completion of a jobTake measurements and mark material for cutting or shapingSelect appropriate machines (e.g. lathes, mills) and position or load material for a jobMonitor machine while workin

Kilgore, TX • (23.6 miles) • Full Time • 9/24/2026

DescriptionJob Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals.Mid-level position – Generally has a minimum of four years of experience and/or demonstrated job relevant knowledge/skills and has obtained welding certifications in the FCAW and GMAW welding processes (1-4 G/F). The MFG Welder 3 has moderate

Tyler, TX 75703 • (40.5 miles) • Full Time • 9/24/2026

Production ManagerCable’s Roofing is always interested in connecting with experienced professionals who may be a strong fit for our team. While we are not actively filling this position at this time, we are keeping our options open for an experienced Production Manager for our Tyler, Texas office.This role is responsible for overseeing the day-to-day production of roofing projects from scheduling through completion. The Production Manager works closely with Project Managers, crews, suppliers, sales, and office staff to make sure jobs are properly prepared, completed efficiently, and closed out accurately.The right person will be organized, proactive, accountable, and comfortable managing both people and moving parts. Strong communication and follow-through are extremely important in this r