Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are looking for Invisible Fence Installers to join our team!
We offer PAID training, hourly pay, and Commissions on Sales at 8.5 percent!
Installs and services Invisible Fence® Brand Pet Solutions at customer’s homes using basic machinery, working with and training customers and pets, while following all company standards and procedures.
Install and Service assigned Invisible Fence® Brand Pet Containment Systems Effectively train Pets and Pet Owner how to use Invisible Fence® Brand solutions Maintain in good working order and cleanliness of all company vehicles and equipment assigned to Field Technician and report to General Manager any issue that requires additional maintenance Maintain Accurate Records Throughout the Install, Service and Train Process while adding install notes and multi-task between other systems, all accessible through a company provided smart phone
Schedule: Must be available to service the customer and take appointments between the hours of 8:00am - 6:00pm, Monday - Saturday, with last appointment availability starting at 6:00pm on a rotating schedule, 5 day work week including weekends if your rotation shift falls on a weekend. Must be available to work 2-3 Saturdays per month (50% Saturdays per month).
Benefits: Hourly Plus Commissions on Sales At 8.5% PLUS Paid Training! Yearly Merit Increases and Growth Opportunities! Company Provided Tools and Materials including Corporate Cell Phone Company Vehicle and Fuel Card Provided Full Benefits Package (Health, Dental, Vision), Eligible on your 31st day 401K plan with a 5% Match, Fully Vested after 6 months of employment Free Products up to $600 plus Discounts with Corporate Partners and $200 Pet Adoption Reimbursement 26 Paid Days Off, totaling 3 weeks and 1 day of PTO plus 11 Paid Holidays $5,250 Tuition Reimbursement Invisible Fence® Brand Swag!
Qualifications: High school diploma or equivalent 1 Year of Customer Service Experience Valid driver’s license, clear driving record and driving skills. Excellent Communication Skills Installation/Field Service Technician Experience Preferred, but Willing to Train the Right Candidate Flexible Schedule with availability between the hours of 8am-7pm, every other Saturdays and once per week, early team meeting to discuss weekly goals and get to know your team better. Enjoy Working as Part of a Team and Independently Must enjoy Driving, Drive Times May Be Long Enjoy Working for a Company that Truly Gives Back to The Community
We are an Equal Employment Opportunity Employer

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

Harris County Flood Control District is seeking qualified candidates for the role of Equipment Operator.
Reporting to the Maintenance Construction Field Supervisor, the Equipment Operator is responsible for operating various pieces of small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair or perform maintenance to channels/bayous within Harris County.
Essential Functions and Duties: Perform manual work in preparing surfaces and mixing concrete for concrete pour. Operate small sized construction equipment, small engines, attachments, power tools and hand tools for channel and bayou maintenance. Maintain, clean, and prepare construction sites to eliminate possible hazards. Assist with the evacuation of other equipment that have become disabled. Remove debris and/or selective vegetation from channel rights of way and de-snag channel bottoms. Clear trees, rocks, and any other large obstacles from the County rights-of-way. Prune limbs for access of equipment. Flag traffic to ingress and egress job sites. Act as a spotter for drivers/operators. Stock and inventory County trucks, trailers and equipment with tools and materials. Wash County vehicles and equipment. Clean shop, fleet parking area, and laydown yard. Assist with constructing forms, placing rebar, pouring, finishing concrete structures, building, or repairing manholes and inlets, and installation of corrugated metal pipe outfalls. Install signs, gates, and bollards. Load and unload equipment and construction materials on/off trailers and rollback trucks. Inspect County equipment and vehicles for safety and compliance before operation. Drive and operate County vehicles and equipment. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)   Qualifications: High school diploma or G.E.D. equivalent One (1) year experience operating small sized equipment. One (1) year experience as a laborer. Valid Class "C" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Familiar with Microsoft Outlook.
Preferences: Knowledge of construction standards, practices, and techniques. (preferred) Knowledge of OSHA regulations (preferred) Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Heavy Equipment Operator II.
Reporting to the Maintenance Construction Field Supervisor, the Heavy Equipment Operator II is responsible for operating various pieces of medium and small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair, and perform maintenance to channels and bayous within Harris County.
Essential Functions and Duties: Construct forms, place rebar, pour and finish concrete structures such as culverts, inlets, and manholes. Operates medium and small-sized construction equipment such as excavators, skid o steers, and other machinery for channel and bayou maintenance. Build and repair manholes, inlets, and stormwater infrastructure components. Install corrugated metal pipe outfalls, signage, gates, and bollards. Perform minor erosion control repairs and grading operations on open channels and drainage facilities. Perform sediment removal operations using excavators, including operations on slopes. Clear debris, trees, rocks, and other large obstacles from right-of-way and channel bottoms. Remove selective vegetation and perform de-snagging operations on channels. Flag traffic and act as a spotter for other equipment operators during the ingress and egress of work sites. Inspect County vehicles and equipment for safety. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: High school diploma or G.E.D. equivalent Three (3) years of experience operating small sized equipment. Two (2) years of experience operating medium sized equipment. One (1) year experience driving dump trucks and or rollbacks. Valid Class "B" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Knowledge of bayou and drainage area maintenance. Knowledge of construction standards, practices, and techniques. Knowledge of OSHA regulations. Familiar with Microsoft Office (Outlook, SharePoint, and Adobe Acrobat Professional).
Preferences: Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Heavy Equipment Operator III.
Reporting to the Maintenance Construction Field Supervisor, the Heavy Equipment Operator III is responsible for overseeing a small crew and operating various pieces of construction equipment, small engines, attachments, power tools and hand tools to construct, repair, or perform maintenance to channels and bayous within Harris County.
Essential Functions and Duties: Oversee and guide a small team of Equipment Operators. Drive and operate various County vehicles and equipment, including visiting project sites to assess equipment and manpower needs. Operate various types of construction equipment such as excavators, skid steers, and other machinery for channel and bayou maintenance. Perform minor erosion control repairs and grading operations on open channels and drainage facilities. Perform sediment removal operations using excavators, including operations on slopes. Construct forms, place rebar, pour, and finish concrete for structures such as culverts, inlets, and manholes. Build and repair manholes, inlets, and stormwater infrastructure components. Install corrugated metal pipe outfalls, signage, gates, and bollards. Clear debris, trees, rocks, and other large obstacles from right-of-way and channel bottoms. Remove selective vegetation and perform de-snagging operations on channels. Flag traffic and act as a spotter for other equipment operators during the ingress and egress of work sites. Inspect County vehicles and equipment for safety and compliance before operation. Load and unload construction materials and equipment on/off trailers and rollback trucks. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: High school diploma or G.E.D. equivalent Eight (8) years of experience operating small sized equipment. Seven (7) years of experience operating medium sized equipment Six (6) years of experience operating large sized equipment Valid Class "B" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Knowledge of bayou and drainage area maintenance. Knowledge of construction standards, practices, and techniques. Knowledge of OSHA regulations. Familiar with Microsoft Office (Outlook, SharePoint, and Adobe Acrobat Professional).
Preferences: Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Flowserve Houston pump manufacturing plant seeks a CNC Machinist to shape shafts. This opening is for second or third shift. Second Shift (2:30 - 11PM) or Third Shift (10 PM - 6 AM, Sunday night to Thursday night) NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Responsibilities & Requirements: 5+ years running CNC machines and shaping shaft.Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Preferred Experience / Skills: Machining ShaftsVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.HS Diploma / GED and 5-7 years relevant experienceThis position is available for either 2nd or 3rd shift Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-13071 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Plains is currently seeking a Mechanical Engineer to join the Technical Services Team, providing technical subject matter expertise to operations and project organizations. This role ensures compliance using engineering standards and industry best practices. The individual in this role may mentor early-career Engineers and travel to field and vendor locations, including international locations, may be required. The Technical Services Engineer is a subject-matter expert on rotating equipment, including pumps and turbomachinery, with a diverse workload and can expect changes in work priorities and multiple projects with short turnaround times.The selected candidate will be eligible for company benefits including Medical/Dental/Vision, vacation time off, and free parking. Additionally, this position comes with the option of a hybrid work schedule, combining working in our Houston office with working remotely.Responsibilities:Partner with Project Engineering or Operations Engineering Teams to develop rotating equipment solutions.Complete RFQ packages, bid reviews, and award recommendations for major mechanical equipment (e.g., pumps, compressors, turbines, meter skids, provers, valves, fittings, pipe, etc.).Support Capital Expansion Projects, including drawing and document reviews and participation in Process Hazard Analysis.Provide support during the installation and commissioning of rotating equipment and perform site inspections as needed to ensure compliance with Plains and supplier requirements.Develop, review, and maintain assigned Company Operations and Maintenance Manuals and Procedures.Develop and maintain Company Construction and Equipment Standards and Specifications.Review and propose facility upgrades for reliability and/or efficiency.Perform vendor qualification reviews and recommendations.Visit suppliers for inspection and/or witness testing of equipment.Visit field locations for equipment reviews, including new construction and troubleshooting.Serve as company representative for industry standards and research organizations (API, ASME, PRCI).Provide broad mechanical engineering support, including but not limited to:Rotating equipment (pumps, turbomachinery, etc.).Measurement equipment (meter skids, LACTs, and provers).Materials (pipe, fittings, flanges) and valves.Welding (API 1104 and ASME Section IX).Preventive and predictive maintenance programs, including condition monitoring and vibration data review.Technical Training to various departments.Lead in troubleshooting mechanical equipment efforts.Provide day-to-day support on other various reactive work.Perform all other duties as assigned.Knowledge, Skills, and Experience Required:Degree in Engineering from an accredited university.5+ years of midstream and/or oil refinery operating experience with an emphasis on rotating equipment technical support, reliability, and/or system design.ISO Vibration Category II or higher certification.Expertise in rotating equipment, including but not limited to centrifugal and positive displacement pumps used in process and pipeline service, compressors, steam, and gas turbines.Knowledge of API 610, 618, 619, 674, 676, 682, and RP 682.Familiarity with ASME B31.3, ASME B31.4, and 49CFR195.Knowledge and experience in the inspection of rotating machinery fabrication and performance testing procedures and evaluation.Experience in root cause failure analysis for various equipment in processing facilities and pipeline transportation systems.Strong communication skills with a focus on teamwork and collaboration.Demonstrated proficiency in standard PC-based programs.Experience using 2D and 3D AutoCAD or similar CAD software.Experience in creating and maintaining internal specifications and operating procedures.Proactive and requires minimum supervision.Ability to handle a heavy workload, with unplanned overtime and changes in work priorities, multiple projects with short turnaround times are common.Ability to travel to field locations, with an estimated travel expectation of 25%.Consistently looks for efficiencies and opportunities to improve group work processes.An organized self-starter with the ability to work under pressure on multiple projects simultaneously.Valid driver’s license with a clean abstract.Cleared criminal history (background) and satisfactory reference checks.Compliance with the Company’s drug and alcohol policy including pre-employment D&A testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is hiring a Fleet Maintenance Manager with ASE Master certification. This senior-level, dynamic, and multitasking professional will oversee all daily maintenance operations for a para-route van service. Key responsibilities include meeting all contractual maintenance requirements and delivering detailed daily, weekly, monthly, and annual reports. The role also requires effective budget management to support the overall maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Working with 150 + buses within the last year and previous passenger transportation in current project or similar environment.ASE Master certifications required and ability to teach is highly preferred.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Ability and willingnessto communicate effectively with all levels of staff in written and oral formats.Strong Computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Overview: **Immediate Sr. Automotive Technician opportunities! **Pay: $30.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Sr. Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:No Sundays or late nightsCompetitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseMust be at least 18 years of ageCurrent ASE’s preferredAbility to work a minimum of five days, including SaturdaysWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Description Brinks Home is a leader in the smart security industry, protecting over one million people across the U.S., Canada, and Puerto Rico. Our platinum-grade protection is backed by award-winning customer service and expertly trained professionals. We strive for the highest standards for our customers while fostering a positive work environment for our employees. We create a culture that fosters innovation, celebrates creativity, and encourages authenticity. Join us and be part of a collaborative team that is relentless in our pursuit of security for life.Position Overview:We are currently seeking a determined Alarm Service Technician who embodies our core values: Service, Accountability, Customer Focus, Growth, and Integrity. The Alarm Service Technician is a hands-on role. You will play an integral role in building and maintaining customer relationships. This role entails visiting customer sites throughout the workday installing, servicing, and inspecting low-voltage electronic security equipment.Key Responsibilities:Experience with Alarm panels such as: 2GIG,Qolsys,Ademco, GE, DSC, DMP, and others.Ability to troubleshoot technical problems.Replace system components as assigned; panels, peripheral devices, audible/visual alarms, etc.Driving to customer homes to perform service. Occasional lifting, carrying (up to 30 pounds), pushing and/or pulling; some climbing and balancing; frequent stops, kneeling, crouching and/or crawling.Diagnose causes of problems or failures in systems for the purpose of identifying equipment and systems repair.Customer education and training including a system demonstration.Conduct a thorough walkthrough / site evaluation with the customer to review work order to make sure the system meets their needs and expectations.Install and test the operations of all equipment to ensure proper functionality and signal verification required to establish service.Identify opportunities to improve the use and functionality of the customers system and provide those recommendations.Maintain safety practices to prevent against injury and damage to property.Maintain a clean and organized workspace / job site, ensuring customers satisfaction after theinteraction.Requirements:H.S. Diploma or GEDGood driving record and Valid driver’s license.Excellent customer service skills.Working knowledge of how an alarm system operates.Must be ok with climbing ladders and working at heights.Must be ok working in tight spaces such as crawlspaces,atticsand basements.Low-voltage license or alarm installation certificationNICET IBenefits:Brinks Home recognizes the value of benefits for you and your family, so we offer a comprehensive and competitive benefits program:Medical, Dental, Vision, 401(k) with Employer Match, Paid Time Off & Paid Holidays, HSA/FSA, Life & AD&D Insurance, Disability Coverage, Maternity/Parental Leave, Mental & Physical Health Benefits, Employee Resource Groups, Volunteer Hours, Discounted Equipment & Monitoring, Employee Referral Program, and Continuing EducationTo learn more about our company culture and career opportunities, please visit our LinkedIn and Career Page.Brinks Home provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#equalopportunityemployer #veteranfriendly

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is seeking Production Machine Operator Starting Pay: $20.00 to $30.00 based on experienceScheduled Shift: Monday - Friday 5:00 a.m. - 3:30 p.m. OT & Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Production Machine Operator. Overview: This position, Production Machine Operator is responsible for operating production machines to produce concrete products. Essential Functions: Operate equipment (MBK, Packerhead, Vibromac) efficiently to produce concrete products from raw material to yard stageInspect the quality of products according to standardsAssist in maintaining accurate and timely production goalsMonitor the operations of machinery and associated equipment and report any concerns or malfunctionsPerform machine set-up and clean-up and other functions associated with job changesMaintain housekeeping in assigned areaCross train on other aspects of production processPerform other duties as assigned Required Education and experience: Experience in a manufacturing/industrial environment required. Experience in the precast concrete/pipe manufacturing industry preferredAbility to read and interpret documents such as safety procedures, machine operating and maintenance instructionsAbility to maintain a high level of accuracy in all aspects of the positionCurrent Driver’s LicenseHigh School Diploma or GED equivalency preferredMust be able to perform basic math. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud.Will work in varied outdoor environments (in all weather conditions - heat, cold, wet, humid, dry and/or dusty conditions).Exposure to cement, and other raw materials. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 75 pounds.Must be able to read, write and verbally communicate in the English language (Bilingual a plus)Must be able to wear a hard hat, safety glasses, steel-toed boots, and hearing protectionMust be able to sit and operate equipment for long periods up to 10+ hours per day Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 5 a.m. to 4:30 p.m. OT will be required as needed. Scheduled shift hours are subject to change to meet business needs. This position occasionally requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! We are located at 5150 Jefferson Chemical Road, Conroe, Texas 77301 EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Conroe is an Equal Opportunity Employer

23005 Katy Freeway, Katy, TX 77450Experienced Automotive Technician Auto Repair Tech Experience is RequiredKIA Experience is Preferred$30 - $41/Hour! Tool Relocation AssistanceWestside KIA automotive dealership in Katy, TX is family-owned and a great place to have a rewarding career! Our high-volume service department is seeking EXPERIENCED Automotive Technicians to join our team! Enjoy working with the newest technology and equipment in our shop. We help our techs learn new skills to increase their income and advance their careers. Apply now and drive your career forward with our growing organization! Upload your resume AND complete the assessment for priority consideration.We Provide Excellent Benefits:$30 - $41/hour performance income based on experience and certificationsTool relocation assistanceWe will match your current vacation timeAll training expenses paid to further your careerContinued education, manufacturer hands-on and web-based trainingMedical, dental and vision insurancePaid holidays and vacationEmployee discounts on vehicles and serviceCareer advancementTeam environment5-day work week, No SundaysResponsibilities - Experienced Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance and installations, including engine, transmission, electrical, steering, suspension, brakes, heating, air conditioning, exhaust systems, and more, according to skill and certifications, that meet dealership and manufacturer standardsKeep shop area neat, clean, and account for dealership-owned toolsRequirements - Experienced Automotive Technician:Required: Automotive repair technician experience, KIA experience is preferredCertified techs are preferredMust be versatile in skills and tasks performedExperience with the latest automotive technologies and shop equipmentA positive attitude, good work ethic, and problem-solving skillsGood communication and customer service skills; team participantValid driver's license and insurableWe are an Equal Opportunity Employer.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $35.19/hr!#QA Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position troubleshoots, calibrates, and adjusts plant floor devices as necessary to maintain optimal performance of plant floor equipment. This position sorts calls and breakdowns and expedites their completion. This position provides information to maintenance mechanics on how to complete required repairs to resolve breakdown situations. This position assists in solving the daily problems inherent in keeping the conveyors or physical facility in good working order.Responsibilities:Responds to internal customers.Responds to facility alarms and emergencies.Troubleshoots problems that arise.Performs preventative maintenance.Qualifications:Bachelor's degree or international equivalent in engineering - PreferredProgramming experience including troubleshooting, basic understanding of networks, motor control theory, and operation including basic AC and DC electrical troubleshooting - PreferredProficiency in Microsoft Office productsAbility to read and interpret electrical schematics and elementary diagramsInternal Salary Grade: 10ELast Day to Apply: February 9, 2025Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

The pay range per hour is $42.15 - $50.32Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 3 (MT3)About job:Monday through Friday from 8:00am to 4:00pm **(subject to change)**Benefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 3 (MT3), you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service. You will work with other Target maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures, and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge.An individual in this role will:Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet, etc.), and communications modules (Ethernet). Configure and adjust PLC parameters and component setupConduct maintenance and higher level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, as neededNavigate ladders and gangways safely and work off platforms and equipment at significant heightsWork effectively in varied conditions, temperatures, and environmentsFrequently monitor all aspects of the internal and external worksite, which may include standing/walking for up to 10-12 hoursLift and/or move product or items up to 49 pounds[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Possess or ability to obtain a valid driver’s licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience with the following areas:Preventive/predictive maintenance proceduresBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenanceDesired:Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields4+ years of experience in the Mechanical or Electrical maintenance fieldBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Flowserve Houston pump manufacturing plant seeks a Manual Grinder to shape shafts. This opening is for second or third shift. Area: The Heights Second Shift (2:30 - 11PM) or Third Shift (10 PM - 6 AM, Sunday night to Thursday night) NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Responsibilities & Requirements: 5+ years running Manual Grinder and shaping shaft.Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Preferred Experience / Skills: Machining ShaftsVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.HS Diploma / GED and 5-7 years relevant experience Req ID : R-13148 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

****************************$5,000 SIGN ON BONUS*********************************** Clean HarborsDeer Park, TXis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

Overview: ** HIRING NOW **Pay: $14.00 - $16.00 per hour** Valid/Current Texas Emissions State Inspector License HIGHLY PREFERRED**Sun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The State Emissions Inspector / General Service Technicianwill perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career.Benefits:No Sundays or late nightsCompetitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Safely transports customers to and from their place of residence or business using the company vehicle.Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle.Operates company vehicle in a safe and courteous manner obeying all traffic laws.Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines.Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager.While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition.Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Qualifications:Possess valid driver’s licensePossess valid Texas Emissions Inspector license (highly preferred)Ability to work a minimum of five days, including Saturday'sMust be at least 18 years of ageWorking Conditions and Physical Demands:The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The General Service Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusWe are committed to providing reasonable accommodations to employees with disabilities upon request.Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there isALWAYS something to do.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is seeking Production Machine Operator Starting Pay: $19.00/hrSecond Shift: Monday 2:30 PM to 11:30 PM - Friday OT & Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Production Machine Operator. Overview: This position, Production Machine Operator is responsible for operating production machines to produce concrete products. Essential Functions: Operate equipment (MBK, Packerhead, Vibromac) efficiently to produce concrete products from raw material to yard stageInspect the quality of products according to standardsAssist in maintaining accurate and timely production goalsMonitor the operations of machinery and associated equipment and report any concerns or malfunctionsPerform machine set-up and clean-up and other functions associated with job changesMaintain housekeeping in assigned areaCross train on other aspects of production processPerform other duties as assigned Required Education and experience: Experience in a manufacturing/industrial environment required. Experience in the precast concrete/pipe manufacturing industry preferredAbility to read and interpret documents such as safety procedures, machine operating and maintenance instructionsAbility to maintain a high level of accuracy in all aspects of the positionCurrent Driver’s LicenseHigh School Diploma or GED equivalency preferredMust be able to perform basic math. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud.Will work in varied outdoor environments (in all weather conditions - heat, cold, wet, humid, dry and/or dusty conditions).Exposure to cement, and other raw materials. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 75 pounds.Must be able to read, write and verbally communicate in the English language (Bilingual a plus)Must be able to wear a hard hat, safety glasses, steel-toed boots, and hearing protectionMust be able to sit and operate equipment for long periods up to 10+ hours per day Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 5 a.m. to 4:30 p.m. OT will be required as needed. Scheduled shift hours are subject to change to meet business needs. This position occasionally requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! We are located at 5150 Jefferson Chemical Road, Conroe, Texas 77301 EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Conroe is an Equal Opportunity Employer

The pay range per hour is $33.50 - $39.86Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 2 (MT2)About job:Monday through Friday from 8:00am to 4:00pm **(subject to change)**Benefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Flowserve Houston pump manufacturing plant seeks a CNC Machinist to set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Third Shift Hours: 10 PM - 6 AM, Sunday - Thursday Area: The Heights NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Responsibilities & Requirements: 5+ years experience running CNC machinesOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them. Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.Equipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.HS Diploma / GED and 5-7 years relevant experienceCandidates must have experience running Vertical Turning Lathe machines (VTL). Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-13074 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Clean Harbors in Deer Park, TXis looking for a Maintenance Manager.The Maintenance Manager is responsible for managing overall cost, quality and time at all facilities at all assigned maintenance hub and spoke sites. Maximizes the Company's return on investment for all fleet assets (equipment and vehicles) by planning, managing and directing all activities associated with maintenance Hub. Works closely with internal managers/professionals to support business needs and to implement companywide maintenance strategy. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsResponsible for the management of all aspects of the maintenance hub and spoke sites in accordance with the region's business plan and budgetManages daily operations, ensuring the proper maintenance and repair of equipment at all Hub and spoke maintenance sitesEvaluates vehicles and equipment to assess replacement due to age, history of repair and overall maintenance costsCommunicate regularly with all maintenance supervisors, planners and parts personnel to ensure good two-way communicationPerforms data analysis, prepares reports and makes recommendations for maintenance facility operations improvementsEnsures that all personnel is adequately trained and equipped to accomplished set goals in a safe, timely and cost-effective mannerInitiates and carries out projects that improve efficiency and/or reduce operating costsRemains current and ensures adherence to all laws, regulations, policies, procedures, and guidelines affecting area of responsibility. (DOT , OSHA, RCRA, etc)Ensure that all tools, equipment, and machinery are maintained in accordance with the Company's preventative maintenance program and the physical facility properly maintainedRecruits, trains and develops qualified employeesCommunicates job expectations and fosters a collaborative climate.Other Duties as AssignedHigh School and specialized training or 1 year college5 to 7 years’ experience may be accepted in lieu of degreeDrivers License RequiredAbility to create actionable items out of data and informationStrategic planning, coupled with tactical executionStrong leadership and personnel development skillsAbility to work across business linesDemonstrated project and change leadership abilityStrong negotiation skillsKnowledge of fleet maintenance systems and processesAbility to use computer and applicable company software.Proficient in MS Office Applications - MS Excel, MS Outlook, MS Word, MS AccessAble to apply standards and processes that maintain regulatory complianceFleet maintenance experience with a decentralized customer baseAbility to facilitate/train others, and ability to navigate and handle difficult conversations.Financial understanding, with the ability to set strategy against financial goalsUnderstanding of metrics that drive fleet maintenance performanceAbility for local travel 30% to 50%Wondering what to expect in starting your career with Clean Harbors Click Hereto view a Day in the Life Video!40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.*CH#LI-JS1

Overview: **Immediate Sr. Automotive Technician opportunities! **Pay: $30.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Sr. Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:No Sundays or late nightsCompetitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseMust be at least 18 years of ageCurrent ASE’s preferredAbility to work a minimum of five days, including SaturdaysWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Overview: CONSIDER MAKING A MOVE TO STERLING MCCALL COLLISION CENTER OF JERSEY VILLAGE!SIGN-ON BONUS FOR QUALITY CANDIDATES!WE ARE A QUALITY COLLISION CENTER WE REPAIR ALL MAKESSterling McCall Collision Center of Jersey Villageis part of the fast growing Group 1 Automotive, a leader in automotive retail. We are looking to add an additional COLLISION REPAIR/BODY & FRAME TECHNICIAN to our team. We are a high volume collision centerwith plenty of work, state of the art facility, with all the latest equipment to help you perform efficiently!This opportunity comes with TOP TIER PAY!In addition to competitive pay, we offer our associates the following benefits:Health, Dental, Vision, Life, and Disability insurance401(k) plan with company matchPaid Time-OffEmployee Stock Purchase PlanEmployee Vehicle Purchase ProgramProfessional work environment, with job training and advancement opportunitiesResponsibilities:Repairs vehicles per estimate and according to manufacturer standards.Notifies management of any additional repairs needed. Documents and additional parts and labor required to perform a satisfactory repair.Maintains and wears all required safety and health personal equipment, including respirator, in the manner recommended by the equipment manufacturer.Demonstrates behaviors consistent with the Company’s Values in all interactions with customers, co-workers and vendors.You need:2 PLUS Years’ experience as a collision repair technician with heavy structural collision and frame experience.ICAR or ASE certifications in auto body repair a plus.Company provides paid training.Working knowledge of all aspects of repairs for damaged vehicles including body work and when to replace or repair parts.Valid driver license in the state that you will work and a good driving record.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*We are an Equal Employment Opportunity EmployerIND2

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This is a Night Shift- Tuesday-Friday 5pm-3:30am. Overtime as needed. Responsibilities: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC lathes/mills.HS Diploma / GED and 5-7 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Prefer but not required experience with Mazak or Haas MachinePlanning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-12357 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Must be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelOther duties as assigned. Requirements: 5-7 years relevant experienceKnowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipmentExperience with installing mechanical equipmentExperience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O ringsProven ability to correctly read and interpret blueprints, engineering drawings, and schematicsAn active driver’s license with a good driving record is essential to the role (80% field work - 20% WFH)Able to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-roundCommunicate by word and actions Flowserve’s values for ethics, safety, and quality Preferred Experience / Skills: High School Diploma/GEDProfessional certifications in this fieldAbility to work collaboratively with unfamiliar teamsExcellent communication skillsGood organizational skills Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-13054 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Customer Product Repair Mechanic-First shift position, Overtime required Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. Responsibilities include: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Work on API PumpsAbility to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate Requirements: 5 plus years relevant experienceAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and partsMust be able to work overtime, weekends, and holidays as the business dictates.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Comply with all Flowserve policies and procedures. Preferred Experience / Skills: Ability to understand work instructions, safety procedures, and company policies.Electrical wiring experience or mechanical assembly experienceExcellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.HS Diploma / GED Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11929 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.