Gilmer, TX 75644 • (18.1 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (18.1 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (18.1 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (18.1 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Longview, TX • (28.8 miles) • Full Time • 10/13/2026

Role: Production ManagerLocation: Longview, TXSalary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k.Summary:This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals.The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains.In addition, the role supports financial planning activ

Longview, TX • (28.8 miles) • Full Time • 10/13/2026

WHAT IS ON OFFERAlfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s.ABOUT USAlfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries.We have honed & carefully crafted ou

Longview, TX 75601 • (31.2 miles) • Full Time • 10/13/2026

Benefits:Opportunity for advancementTraining & developmentLEGIT PRODUCTIONS LLCTexas Division PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater respo

Kilgore, TX 75662 • (27.7 miles) • Full Time • 10/12/2026

Description: POSITION SUMMARYSupports quality operations by performing inspections, maintaining quality records, and assisting with non-conformance documentation and supplier quality activities.ESSENTIAL DUTIES & RESPONSIBILITIESPerform dimensional and visual inspections on incoming, in-process, and finished partsRecord inspection results in quality records and ERP systemIdentify and tag non-conforming material and initiate NCR documentationAssist with first article inspections (FAI) and qualification testingSupport internal and customer quality auditsMaintain calibrated measuring equipment and calibration recordsAssist Quality Manager with data entry, reporting, and filingRequirements: REQUIRED QUALIFICATIONSHigh school diploma or GED2+ years inspection or quality control experience in ma

Mount Pleasant, TX 75455 • (42.5 miles) • Full Time • 10/12/2026

Job description At Mid America Pet Food, our vision is to enrich the lives of pet families, and we believe that starts with our own team. We foster a positive and inviting atmosphere where employees feel valued and appreciated, making MAPF a great place to build your career.As a full-time team member, you'll enjoy a generous benefits package, includingemployer-paid health insurance,100% coverage of qualifying dependents,paid time off (PTO), aFlexible Spending Account (FSA),401k matching, and opportunities forovertime.We are currently seeking a dedicated Production Tech to contribute to maintaining a clean, professional, and safe working environment. In this multi-faceted role, you will perform routine and non-routine work as directed, always adhering to company policy, procedures, and valu

Tyler, TX • (22.7 miles) • Full Time • 10/11/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Check out our many videos to learn more!http://

Tyler, TX 75702 • (19.7 miles) • Full Time • 10/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Tyler, TX • (22.7 miles) • Full Time • 10/10/2026

Company Description Location:Tyler, TXPay:Pay Rate $30.71/hourShift:5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship.Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment to produ

Longview, TX 75605 • (30.5 miles) • Full Time • 10/10/2026

W&B Service Company has an excellent opportunity for a Transport Refrigeration Technician. We are the largest transport refrigeration dealer of Carrier Transicold, a world leader in Truck, Trailer and rail refrigeration systems. We are also the nation’s largest full service Hyundai Translead trailer dealer. We have 21 facilities throughout the Southwest, including Texas, Arkansas, Louisiana and Oklahoma.Duties will include:Perform diagnostics and repair starting and charging system, cooling and re-charge, and electrical including common fault codes. Repairs include performing leak detection procedures, compressor replacements, soldering refrigerant lines, evaporator/condenser replacements and front & rear main engine seal replacements.Perform repair and maintenance on reefer units in accor

Longview, TX 75602 • (36 miles) • Full Time • 10/10/2026

We are hiring immediately for a full time QUALITY ASSURANCE TECHNICIAN position.Location: Fresh & Ready FG TX - 2002 East Cotton Street, Longview, TX 75602. Note: online applications accepted only.Schedule: Full time schedule. Days may vary, 6:00 am to 4:30 pm. Availability to work weekends required. Further details upon interview.Requirement: Previous quality assurance, lot coding, and food quality experience required.Fixed Pay Rate: $15.00 per hour.*Internal Employee Referral Bonus AvailablePlease note that employees in this role will work in a temperature-controlled environment with exposure to cold conditions for extended periods of time.We Make Applying Easy!Just text JOB to 75000 & search for the requisition ID number1570694.The advertised program is a conversational recruiting assis

Longview, TX 75605 • (30.5 miles) • Full Time • 10/9/2026

About the Role:BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients.In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services.BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developing pr

Winnsboro, TX • (22 miles) • Full Time • 10/8/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Kilgore, TX 75662 • (27.7 miles) • Full Time • 10/8/2026

Revolution is now hiring for an Extrusion Manager position in Kilgore, TX. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.RESPONSIBILITIES/ DUTIES:Directs and coordinates activities of production department(s) in processing materials or manufacturing products in industrial organization by performing the following duties personally or through subordinate supervisors.Analyzes production schedule to estimate worker hours and create machining schedules that meet both internal and external customer needs.Reviews production schedules to ascertain product data such as types, quantities and specifications of products and scheduled delivery dates in order to plan department operations and establishes priorities and sequences for manufac

Tyler, TX 75701 • (22.3 miles) • Full Time • 10/8/2026

We are seeking a skilled and dedicated Industrial Maintenance Mechanic to join our team in Tyler, TX, 75701. In this role, you will play a crucial part in ensuring the smooth operation of our manufacturing facility by performing maintenance and repairs on a variety of industrial equipment. If you have a passion for problem-solving and a knack for mechanical systems, we want to hear from you! Responsibilities Perform routine maintenance on machinery and equipment to ensure optimal performance.Troubleshoot and diagnose mechanical issues, providing timely and effective solutions.Conduct repairs on various types of industrial equipment, including conveyors, pumps, and motors.Maintain accurate records of maintenance activities and repairs performed.Collaborate with other team members to improve

Longview, TX • (28.8 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Kilgore, TX 75662 • (27.7 miles) • Full Time • 10/7/2026

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world’s biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact.What does that mean for you? You’ll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn’t part of our business. It’s the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world’s biggest and best-loved brands. You’ll learn new ways of working, with automation and new technology that’ll help you ge

Tyler, TX 75707 • (23.6 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Tyler, TX 75706-6031 • (22.7 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Kilgore, TX 75662 • (27.7 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Longview, TX • (28.8 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Tyler, TX 75703 • (28.3 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Longview, TX • (28.8 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX 75706 • (12.6 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Longview, TX 75604 • (25.3 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/

Longview, TX 75602 • (36 miles) • Full Time • 10/2/2026

Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient preparation and ti

Daingerfield, TX 75638 • (39.2 miles) • Full Time • 10/2/2026

The Bullpen Catcher plays a vital role in supporting the training and development of athletes across professional, collegiate, and youth levels. This individual is responsible for assisting with on-field activities, providing athlete support, coordinating sessions, and maintaining a high-performance environment. The role offers valuable exposure to performance training and player development, with opportunities for advancement into coaching and administrative positions.ResponsibilitiesAssist with daily training setup, flow, and breakdown in the bullpenSupport professional, collegiate, and youth athletes during warm-ups and drillsTrack athlete throwing performance and development dataCoordinate session schedules and communicate with athletesMaintain a clean, organized, and efficient bullpen

Kilgore, TX • (27.6 miles) • Full Time • 10/2/2026

DescriptionThis position is responsible for refurbishing frac trailers and related components to include engines, pumps, transmissions, etc.Mid-level position – Generally has more than three years of experience, but less than six years, and/or demonstrated job relevant knowledge/skills. A Level III Technician is familiar with a variety of the field’s standard and technical concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Level III Technician performs a variety of standard and technical tasks, works under general supervision, and is often a team member on a large project. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values

Longview, TX • (28.8 miles) • Full Time • 10/1/2026

The Materials Engineer works in conjunction with the Engineering Manager or Sr. level Engineer. The Materials Engineer is responsible for maintaining existing material designs and may work on the development, validation, release and launch of new materials, working in a cross-functional team environment. Responsibilities also include: continuous improvement of current production products/processes, assistance with manufacturing process improvement, customer concerns, warranty analysis, and supplier development. Main material focus is with rubber compounds and process chemicals for metal preparation for rubber bonding.What You’ll Do:Promote the STEMCO / Enpro Culture by exhibiting the five principles of exemplary leadership: Modeling the Way, Inspiring a Shared Vision, Enabling Others to Ac

Lone Star, TX 75668 • (37 miles) • Full Time • 10/1/2026

Experienced CNC Programmers Only This Is NOT an Operator PositionA&E Machine Shop, Inc. | Lone Star, TX$27.00–$36.00/hour, based on experience | Full-Time | In PersonPLEASE READ BEFORE APPLYINGA&E Machine Shop, Inc. is hiring an experienced CNC Programmer who can independently program, set up, and operate CNC equipment.You must have previous hands-on CNC programming experience to be considered for this position.This position is NOT intended for candidates whose CNC experience is primarily:Loading and unloading material or componentsPressing cycle start and monitoring a machineRunning programs written by someone elseMaking basic offset adjustments onlyPerforming production operator duties without programmingAssisting another machinist with setupsWe need a machinist who can receive a bluepri

Pittsburg, TX 75686 • (28.2 miles) • Full Time • 9/30/2026

Title: Quality Assurance Lead Location: Pittsburgh, PA Team Dynamic: working within a larger team of data analysts, business analysts, developers, management team. Roles and Responsibilities: • Lead quality engineering and testing for data?driven regulatory reporting applications. • Validate data accuracy and completeness across source?to?target data flows and reports. • Design and execute test strategies covering functional, regression, and data reconciliation testing. • Partner with technology and business stakeholders to ensure regulatory requirements are met. • Oversee test execution, defect analysis, and root?cause identification. • Own testing documentation including scope, strategy, execution results, and delivery artifacts. Must Have Technical Skills: • 5–8 years of experience in d

Hawkins, TX 75765 • (0 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Henderson, TX 75652 • (41 miles) • Full Time • 9/30/2026

This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility.Responsibilities include but not limited to:Test electrical systems and circuits in electrical wiring, equipment, or fixturesInspect electrical systems, equipment, or components to identify hazards, defects, or repairTroubleshoot, program, and upgrade Programmable Logic Controllers (PLC)Work with vendors to identify needed parts and recommend to SupervisorUnderstand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematicsProgram AC & DC variable speed driversUpdate power distribution system, MCC, and switch gears

Henderson, TX • (42.1 miles) • Full Time • 9/27/2026

Description: POSITION SUMMARYThe Foreman of a crew is responsible for overseeing the construction, maintenance and operation of electrical systems, to ensure assigned projects are completed in accordance with design, budget, schedule and safety considerations.Reasonable Accommodations StatementTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.Requirements: ESSENTIAL FUNCTIONSProvide leadership and direction to crews to ensure safe, efficient, and quality operations.Work with GF in estimating worker requirements, equipment and material, anddevelop “look ahead” schedules.Ensure crew follows GF’s schedule of activi

Tyler, TX 75701 • (22.3 miles) • Full Time • 9/27/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Kilgore, TX 75662 • (27.7 miles) • Full Time • 9/26/2026

***This job has preference to qualified local job seekers within 60 miles of our Axis Kilgore, TX facility.Reporting to Operations management, the Pumping Foreman leads field pumping operations and directs assigned crew members in the safe and efficient rig-up, operation, maintenance, movement, and rig-down of pumping equipment, tools, and related assets at the shop, yard, and customer locations. This position serves as a field-level leader responsible for coordinating job execution, verifying equipment readiness and pressure-control activities, communicating with customers and other service lines when designated, and coaching Pump Operators and new employees on safe work practices, job procedures, equipment operation, and documentation requirements.Essential Duties and ResponsibilitiesThe

Quitman, TX • (16.1 miles) • Full Time • 9/26/2026

Join Our Team as a Manufacturing Production Employee!Are you ready to bring your skills to a dynamic and growing company? Amphora Nutritional Manufacturing, located in Quitman, TX, is looking for a dedicated and detail-oriented Manufacturing Production Employee to join our team. If you have at least one year of experience and are eager to contribute to a company that values quality and teamwork, we’d love to hear from you!About Amphora Nutritional ManufacturingAt Amphora Nutritional Manufacturing, we pride ourselves on producing high-quality nutritional products that make a difference in people’s lives. Our team is passionate about excellence, and we work together in a supportive and collaborative environment to ensure every product meets our high standards.What You’ll DoAs a Manufacturing

Sulphur Springs, TX 75482 • (42.4 miles) • Full Time • 9/25/2026

Now Hiring: Cabinet & Hardware Assemblers (Bilingual Preferred)Estamos Contratando! Ensambladores de Gabinetes y Hardware (Se Prefiere Bilinge)Are you experienced in construction or assembly? Can you work with your hands, follow blueprints, and use power tools confidently?Rodgers Wade is looking for Cabinet/Hardware Assemblers to join our team in Paris, Texas!Tienes experiencia en construccin o montaje? Sabes usar herramientas y trabajar bien en equipo?Rodgers Wade quiere que formes parte de nuestro equipo como Ensamblador de Gabinetes/Hardware!Location / Ubicacin: Paris, TXPay Rate / Salario Inicial: $15–$17 per hour (based on experience)Schedule / Horario: Monday–Friday | 5:00 AM – 1:30 PM Some Saturdays & Overtime as needed / Algunos sbados y horas extras, segn sea necesarioWhat You’ll