AutoReqId: 18066BR Pay Class: Hourly Hourly Pay Rate: 21.00 - 25.00 DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Plant Maintenance Mechanic for our South Texas Stabilized Sand business located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For Minimum 1 year of welding and fabrication experience required. Weld and torch, certification a plusMinimum of 6 months of hands-on maintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an average of 50 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsHigh School Diploma or equivalent preferredPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentMSHA Part 46 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentPerforms routine preventive maintenance checks on all production equipment and machineryRepairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserves and listens to mechanical devices in operation to locate causes of problemDismantles devices to gain access to and remove defective partsLubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantAccomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environmentTroubleshoot equipment failures to determine root cause and initiate appropriate remedial action.Repair of equipment to improve availability and reliability for production.Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays.Ensure preventative maintenance compliance and that repair history is properly documented.Assist in sourcing and requisitioning maintenance supplies, equipment, and services within budgeted guidelines.Performs other related duties as assigned Requirements: Three to five years of work experience in a manufacturing plant as a Maintenance Mechanic or TechnicianKnowledge and experience working with high-speed equipment and electric-pneumatic controls.Able to use both a MIG welder, and ARC welder.Able to order parts and maintain inventory of all maintenance-related material.Advanced working knowledge on mechanical/electrical systems and components; including, but not limited to, Pneumatic, Hydraulic, Pumps, Gear Boxes, Power Transmission, Material Handling, Sensor, Transmitters, DC and AC circuits, Transformers, Power and Energy, Arc FlashWorking knowledge and experience on Automation; Industrial Process and Control system; PLC; Measuring Devices; Instrumentation; Robotic Application; Bulk Handling SystemWorking knowledge and experience on Facility Maintenance (Roof, Dock, plumbing) and Plant Equipment (Boiler, Air Compressors, Ammonia/Freon/Glycol Refrigeration, HVAC, Ventilation, Cooling Tower, Condenser, Backflow preventer, Sprinkler and Fire Extinguisher, Wastewater System, )Planning, scheduling & assigning ability while well experienced in defining priorities, required skills & resources.Hold practical knowledge of Microsoft Office.Multitasked in a fast-paced environment with lots of changes in direction bases business requirement.Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Details Job LocationBrookshire, TX - Brookshire, TXRemote TypeHybridPosition TypeFull Time 30-40 hours per weekSalary Range$23.00 - $25.00 Hourly Company Information At BH Management Services, we are committed to creating value. We acquire, improve and manage apartment communities, and our success in this endeavor is evidenced by our growth from a start-up firm in 1993 to one of the largest multi-family management companies in the nation. BH understands that great customer service is what keeps residents satisfied, and that great service comes from engaged, happy and well-trained team members.In 2018 and 2017, BH was ranked as one of FORTUNE magazine and Great Place to Works "Best Workplaces for Women." BH was also ranked in 2018 and 2020 as one of the "Best Workplaces for Millennials. In addition, in 2019,BH was named to the 100 Best Workplaces for Diversity. We continue to recognize that we are only as strong as each individual employee and we value our employees by providing a strong benefit package:3 Weeks of Paid Time OffMedical/ Dental/ Vision401(k) + company matchBirthday Paid Day OffBH Gives Back (Paid Volunteer Time Off)12 Paid HolidaysBH Paid LeaveSabbaticalEducation ReimbursementEmployee Assistance Program Job Description The Maintenance Manager Build to Rent (internally known as Service Manager BTR) coordinates the work of employees who repair and maintain buildings/facilities. Prepares work schedules, assigns work, and oversees the work product. May be involved in new construction or modification of existing properties. Performs a variety of complicated tasks. Responsible for maintaining adequate inventory of supplies for repairs and monthly maintenance budget monitoring. The Service Manager Build to Rent will be responsible for multiple site visits weekly and running between one and four communities simultaneously. Exhibits strong commitment to the service needs of the internal and external customer. Represents the company in a professional and courteous manner. Essential Job Functions:Coordinates and assists with responding to resident/management requests for the property. Periodically checks the work progress of each maintenance employee, assisting and providing direction as needed. Completes weekly/daily maintenance employee schedules, communicating assignments to maintenance staff while assisting with touring property daily to look for needed maintenance and liability hazards. Repairing hazards or assigning completion of these tasks to the maintenance team. Exhibits strong ability to use independent judgment (following prescribed procedures) to determine actions to be taken, priorities, emergencies, etc.Responsible for the daily upkeep of the grounds and appearance of the property including assistance with interior/exterior rehabilitation and construction projects.Responsible for the upkeep and security of all property-issued tools. Keeps abreast of relevant industry issues, government regulations and restrictions concerning maintenance procedures and incorporates them into planning and decision-making.Participates in the site staffing needs in conjunction with the Community Manager Build to Rent.Assesses training needs of employees, provides input for needed training programs, coordinates and schedules appropriate training. Importance regarding safety and skill training for all maintenance employees. May assist with completing written property safety audits. Has a complete understanding and working knowledge of the companys policies and procedures. Oversee and ensure that established preventative maintenance programs are implemented, documented, followed and participation in ongoing training per BH program guidelines. May diagnose problems and makes repairs in areas such as HVAC, electrical, plumbing, carpentry, dry walling, interior and exterior structural, appliances, and apartment make-readies.Assists with monitoring of resident satisfaction and ensures follow up on the results by property maintenance staff.Must be able to deal with moderate to high levels of stress due to meeting deadlines, reprioritizing activities and supervising employees.Other duties as assignedMinimum Qualifications/Skills:Minimum of two years or more experience with progressive maintenance, safety, and all major types of heating and air conditioning, construction background including, but not limited to: foundations, framing, roofing, plumbing and electrical Working knowledge of building maintenance, repair, and preventative maintenance programs, irrigation and pool systems, large and small appliance repairAbility to work remotely if necessaryA positive, motivating and team- oriented attitude. Strong organization skills; being able to manage warranty requests with multiple vendors. Basic computer skills/knowledge required to perform job functionsAbility to work independently with minimal supervision and excellent time management skills; ability to prioritize work functionsStrong communication and interpersonal skills, and a positive, team-oriented attitudeAbility to work with a diverse group of people and customersRequired to provide own (industry specific) hand tools A valid drivers license and/or reliable transportation required Ability to travel to and work onsite up to a minimum of 95% of the time. Desired Qualifications/Skills:HVAC certification E.P.A Certification required (Type II domestic HVAC systems) CPO (Certified Pool Operator) requiredCAMT preferred or ability to obtain within the first year of employmentHVAC, supply purchasing and bidding experience helpfulE.P.A 410A certification preferred or ability to obtain within the first year of employment Working knowledge of Microbial Growth preferredWork Schedule 8am-5pm, Monday-Friday (work schedule may vary). Some overtime may be required and ability to work extended hours including on-call needed to meet business needs. Traveling to and working onsite up to a minimum of 95% of the time. BH/B.HOM is an Equal Employment Opportunity Employer. We foster the diverse voices of our community by advocating for inclusivity, celebrating our differences, and continually evolving our practice to make BH/B.HOM a better place to work and live.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

**********$5,000 SIGN ON BONUS!!********** Clean Harbors in La Porte, TX is looking for a Mobile Vehicle Mechanic to join their safety conscious team! This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area.MUST HAVE YOUR OWN TOOLS! Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings!Speak with a recruiter today to learn more!!Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management.What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire.40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today!To learn more about our company, and to apply online for this exciting opportunity, visit us at https://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.“2022 Top Company for Women to Work for in Transportation ”Responsibilities:- Perform routine maintenance and repairs on diesel engines, including troubleshooting and diagnosing issues.- Inspect and test diesel engines to identify any potential problems or areas of improvement.- Repair or replace faulty parts, such as brakes, shocks, struts, and suspension systems.- Conduct preventative maintenance on diesel engines to ensure optimal performance and longevity.- Use hand tools and power tools to complete repairs and maintenance tasks.- Read and interpret schematics, diagrams, and technical manuals to assist with repairs.- Operate and maintain equipment used in diesel engine repair, such as lifts and diagnostic tools.Requirements:- Proven experience as a Diesel Mechanic or similar role.- Strong knowledge of diesel engines and their components.- Familiarity with tractor-trailers, industrial equipment, and other diesel-powered machinery.- Proficient in using hand tools and power tools for repairs and maintenance tasks.- Ability to read and interpret schematics, diagrams, and technical manuals.- Excellent problem-solving skills to diagnose issues and find effective solutions.- Physical stamina to perform manual labor tasks, including lifting heavy equipment or parts.- Ability to work independently or as part of a team in a fast-paced environment.Note: This job description is not intended to be all-inclusive. The employee may be required to perform other related duties as requested to meet the ongoing needs of the organization.

*** $10k SIGN ON BONUS ELIGIBLE ***Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.The Embraer Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft (airframe and powerplant). Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic.What to expect in this role:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Experience in corporate aviation on Embraer Legacy, Prader or Phenom.A valid FAA Airframe and Powerplant (A&P) License is required.Ability to read and interpret maintenance manual procedures, blueprints, technical manuals, and schematic diagrams.Must be authorized to work in the U.S.High School Diploma or GEDMust be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsMinimum 3 years of experience and formal training on Embraer Legacy, Prader or Phenom.Factory authorized training on assigned aircraft or engines is preferred.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Job Summary: Responsible for performing preventative maintenance, special inspections and general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and company standards. Determines the overall mechanical condition of tractors, trailers and associated equipment, diagnoses component malfunctions and initiates repair actions. Repairs components by replacing worn or damaged parts with new or reconditioned parts. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub- assemblies, components, parts, or systems, such as, brakes, hubs, bearings, seals, electrical, air conditioning, fuel, steering, hydraulics; control linkages, clutches, and traction units. Use a welder to make repairs as needed. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers’ maintenance schedules and for researching parts. Properly annotates all maintenance and labor performed in maintenance management software. Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned.Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities: Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks.Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Required to have demonstrated knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Ability to use vehicle diagnostic software.Up to 3 years as a fleet mechanic. DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. Education and Experience: High school diploma, completion of G.E.D Required. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $28 - $32 / hour #CAZL ExperienceRequired2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience.3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.3 year(s): Experience in repair and service of trailers and medium duty trucks.EducationRequiredHigh School or better

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.Work hours for this position will be from 6:00 PM to 2:30 AM CST. ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Required10 yrs. of experience of working with GenetecGenetec Certification RequiredMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.Must have 10 years of expierence supporting Genetec equipment, certification preferredHigh School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredBosch, Honeywell, Radionics, or DMP system knowledge preferredEdwards/EST, Simplex, or GE / Mirtone system knowledge a plusIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits includingOpportunity for annual merit pay increasesCompany Cell PhoneCompany VehicleHighly competitive salaryPaid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiring

** $10k Sign On Bonus Eligible **Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.As a Learjet Mechanic at StandardAero Houston, you will be responsible for using your sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. You will perform operational checks and engine runs to ensure air-worthiness prior to departure.What to expect in this role:Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Corporate aviation experience and training on Learjet.High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License.Must be authorized to work in the U.S.Must be available to work overtime and weekends as needed.Must be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft.Preferred Qualifications:Minimum 3 years corporate aviation experience on Learjet.Factory authorized training on Learjet.Benefits that make life better:Comprehensive Healthcare Insurance401(k) with a 5% company match, immediately vested. Paid Time Off starting on day one!Quarterly Bonus opportunitiesHealth & Dependent Care Flexible Spending AccountsShort & Long-Term Disability InsuranceLife & AD&D InsuranceCareer development and cross-training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Clean Harbors Deer Park, TX is looking for a HM183 Tank Inspector to join their safety conscious team! The HM183 Tank Inspector is primarily responsible to perform visual, internal, pressure and leak tests on truck mounted tanks. As well as being responsible for tank testing on Hazardous Material certified tanks such as vac trucks, hydro excavators, oil tankers, guzzlers, tanker trailers, cargo tanks, and more. Must have 3+ years’ experience as a tank inspector (VIPK inspections) required; HM-183 Register Inspector (Tank Inspector)Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Ask a recruiter today for more information!Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform VIPK inspections [visual, internal, pressure, leakage];Timely and accurate completion of all required paperwork;Assist with other repairs and preventative maintenance in shop as required;Order parts and maintain inventory as required; Perform necessary tank test on units, and ensure they comply with all government and company standards and regulations;Perform repairs to tanks within the inspectors’ qualifications;Apply proper decaling to tanks;Maintain all tools and test equipment;Assist with finding qualified repair shops when necessary.What does it take to work for Clean Harbors 3+ years’ experience as a tank inspector (VIPK inspections) required;HM-183 Register Inspector (Tank Inspector) Certificate is strongly preferred;1+ years diesel mechanic experience with heavy-duty trucks and/or equipment required;Must have own set of basic tools, up to ½” (specialty inspector tools will be provided);Strong computer skills required;Valid Driver’s License is required;Experience operating heavy equipment is an asset. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education and Experience: Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay: $25 - $28 / hour #CAZL ExperienceRequired1 year(s): Experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 1 year(s): Experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sicktime –15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out:A Day in a Life at Johnson ControlsWhat you will doREMOTE Industrical HVAC O&M Customer Business ManagerUnder minimal direction, this position will support sales, installation & commissioning of Industrial York Process Systems (YPS) Engineered Chiller offerings. This role will interface with YPS chiller design / contract engineering, product technical support, Engineered Controls System Group, Baltimore Parts and the field service and systems organizations. Supports JCI service branches on large, complex, retrofit or conversion projects by providing technical, engineering, or process support on York & Non-York Chillers in the Industrial Process Refrigeration vertical market. Performs high level analysis and engineering review on more complex technical commissioning projects. Supports reselection engineering on compressors, heat exchangers, valves, etc. for performance and component analysis for YORK & Non-York Chillers. Provides on-site technical support for Customers and field teams on commissioning execution and service delivery of Industrial Process Refrigeration Equipment. Leads engineering or process tasks during detailed development of conceptual solutions. Conducts Industrial and Hydrocarbon Training for BSNA Service as required.How you will do itProvide application, engineering, sales, and commissioning support for Industrial YPS Chiller projects.Compile notification packages for branches responsible for commissioning YPS chiller packages. Assess skillset within the branches and if necessary, assist in locating additional support.Assist or direct commissioning of complex Industrial Process Systems chillers and Enhanced Control Panel Retrofit Projects to ensure they meet customer objectives & schedules.Provide technical and training support to branch field personnel on the commissioning of complex Industrial Process Systems and enhanced Control Panel Retrofit Projects.Establish procedures on a job-by-job basis to ensure timely completion and appropriate cost control for YPS chiller commissioning & control panel retrofit projects.Lead or participate in sales to service turnover meetings for scope clarity, personnel requirements, & contractor responsibilities for new YPS Start-Ups and Commissioning.Assist field sales in estimating Quantum Microprocessor & Programmable Automation Controllers (Allen Bradley) for Industrial YPS chillers and chillers related products.Review drawing details and layouts to ensure proper installation for YPS Retrofit Projects.Lead scheduled project review / update discussions with internal and external customers. Provide & coordinate training to customers on the operation of process systems and enhanced panels/controls.When applicable, participates in the creation of technical literature for specific retrofit offerings.Prepare or assist in preparing proposals and other customer communication documents.Maintain effective working relationships and communications with marketing, service, sales, and YPS / Frick manufacturing to ensure that products meet customer’s requirements.Exhibit high degree of technical competence in specific functional areas including Industrial Process Refrigeration equipment/controls, Chiller equipment/controls, and PLC functionality and how to interact successfully with YPS equipment.Familiarity with JCI warranty systems and how they apply to multiple systems within the Industrial space infrastructure. Work in conjunction with the JCI branch and YPS / Frick to assure streamline approval for warranty issues/repairs.Report to YPS / Frick Product Technical Support, Engineering, and the Factory Quality team any issues related to equipment quality or recommended enhancements(innovation) to the equipment.Other Duties:Use standard JCI development processes and tools in performing tasksResponsible for remaining current with relevant engineering or design standards and practicesMay provide post-contract design review supportActively participate in relevant professional organizationsResponsible for the promotion and adherence of JCI safety policiesPerform other related duties as assignedWhat we look forBachelor’s Degree in Engineering, Engineering Technology, or a related field as appropriate OR a minimum of 10 years of experience in Industrial Process Refrigeration.Ten years of experience in engineering / commissioning chillers / Industrial Process Refrigeration electronic controls related products.Experience with Central Utility Chilled Water Systems is preferredMember of ASHRAE, IDEA and function- specific licenses or certifications preferred.Possess strong analytical capabilities and ability to manage tasks associated with development of projects.Fully competent in analysis and assessment of mechanical and electronic systems. Effectively leading in team settings.Good written and verbal communication skills and is comfortable working in customer-facing situations.Solid computer skills, including an understanding of MS Word, MS Excel, MS PowerPoint, MS Visio, and MS Project.Ability to Travel approximately 50%.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis is an embedded technician position – in Deer Park area.We are looking for a skilled journeyman chiller mechanic who has experience with industrial processed equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 211).Journeyman status required.Minimum of 5 years of practical working experience with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license.Must be willing to participate in on-call rotation schedule.TWIC card – or be able to obtain one.ISTC basic – or be able to obtain one.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Able to identify parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Able to learn and demonstrate vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Able to learn and demonstratetractor and trailer maintenance, DOT rules and regulations, company policies and procedures. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. #CAZL Pay is $21 - $23 / hour ExperiencePreferredDiagnose and repair tractors and trailers

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).How you will do itThis candidate will be a self-starter who must be able to lead a project team of technicians. Interaction with customers, attention to detail in quoting jobs, scheduling technician hours, promoting safety and constant communication play a key role in this position. Must be computer literate with the necessary ability to develop, close and manage all types of quoted work.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, with practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.What we look forRequiredRequires Mechanical Journeyman status.Experience in residential / light commercial /commercial HVAC / and mechanical troubleshooting experience.Knowledge of boiler and steam operations.Good verbal and written communication skillsOvertime will be available in this position.Must be able to pass background check and have valid driver's license.This is a Bargaining Unit Position.

What you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.How will you do it Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired· Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.· Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.· Computer savvy with good verbal and written communication skills.Preferred· Five (5) years of Commercial and or industrial work experience in the HVAC industry· Refrigeration Certification preferred.· EPA Universal Refrigerant Certification#TechHiring

Build your best future with the Johnson Controls Team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary starting at $56k- $60k base, plus guaranteed commission and sign-on bonus with total compensation of $83k – $87k (may change based on location)Paid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will do OurEarly CareerSales Engineering(BEST) Programis a 4-monthtechnical sales development programfor Recent College Graduates thatfocuses on creating market share by strategic selling Johnson Controls’HVACproducts and services to commercial customers.In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 4-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals.#BESTHow you will do it Estimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired: Currently pursuing an Engineering Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January or June 2025, must be able to work full-time before program beginsStrong analytical ability to solve programs and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills Preferred:Electrical or Mechanical Engineering Degree, strongly preferredPrevious sales or engineering experiences through co-ops, internships, part-time or full-time jobs (preferred)

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Contact customer representative and ascertain equipment/systems problems.Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications.These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge, and fire pumps.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc., to diagnose and repair equipment.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit effective customer service skills by consistently communicating with the district staff and customers to ensure complete customer satisfaction.Electronically complete Service Acknowledgements with proper coding and obtain customer’s signature.Participate in a scheduled On-call rotation.Perform other duties as assigned.What we look for5 years of documented experience in Fire Sprinkler/Suppression industryExperience in reading and interpreting blueprints, submittals, and operational/product manualsHigh School Diploma or equivalent requiredMust be willing to travel.Ability to follow verbal and written instructions Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Able to participate in an on-call rotation schedule. Overnight travel will be required.Demonstrate a high level of customer service Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Must possess and retain current (F Card) State Fire Protection License or Journeyman License valid. PreferredNICET Certification - ability to acquire within the 1st year.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis is an embedded technician position – in Deer Park area.We are looking for a skilled journeyman mechanic who has experience with HVAC comfort cooling, air cooled and water-cooled systems in the industrial market.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 211).Journeyman status required.Minimum of 5 years of practical working experience with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license.Must be willing to participate in on-call rotation schedule.TWIC card – or be able to obtain one.ISTC basic – or be able to obtain one.

Job DescriptionWhat you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredTwo (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.Computer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferred.EPA Universal Refrigerant Certification

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, trouble shooting and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of three (3) years of practical working experience on Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units with strong HVAC/ mechanical troubleshooting experience.Able to repair centrifugal compressors, steam turbines, screw chillers system components.Travel maybe required 10% to 20% to support Branch Customers startup and commissioning activities as well as aftermarket service trouble shooting.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs and JCI’s STA to gain knowledge in HVAC products and sales quoting.You will work collaboratively with other local market mechanics.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaidvacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out! :https://youtu.be/pdZMNrDJviYWhat you will doHVAC Mechanical Quotes RepPromote the Johnson Controls value proposition to the owner community by acting as the champion for estimating and quoting Labor & Materials (L&M) and small retrofit technical solutions.Assist with building long term customer relationships/partnerships with owner accounts by partnering with the Sales team. Responsible for customer satisfaction and loyalty while working in conjunction with operations and sales partners. Drives customer satisfaction to aid in cultivating and managing long-term relationships by qualifying and closing quoted opportunities. Utilizes quoting tools to prepare, present and finalize quote opportunities.Provides coaching and training to Technicians and Sales on estimating, selling and using the quote tool for L&M and small retrofits. Seeks to expand the depth and breadth of Johnson Controls offerings sold with owner accounts. Actively participates in all developmental and training activities and programs to gain knowledge of the JCI product and service offering.How you will do it:Responsible for inbound customer quote calls. Generates quotes for Johnson Controls offerings persuasively, persistently and confidently to owner accounts. Manages multiple, ongoing, opportunities by receiving, reviewing and processing quotes to customer’s specifications. Partners with Sales team for quotes that are larger in scope.Demonstrates technical and business expertise by providing information on our products and services and maintains a high level of credibility. Effectively estimates, writes, and presents proposals. Able to go to job sites to identify opportunities, estimate and quote without assistance.Partners with Sales to ensure full understanding of the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably position Johnson Controls.Follows up on all open quotes. Utilizes applicable tools effectively to plan and document quoted opportunities. Manages the high activity of the pipeline with a focus on sales phase, close date, and probability of a close as well as other pertinent pipeline information. Manages to Branch targets for quotes and closure.Provides training and coaching on the use of applicable tools, finance training, sales soft skills training and GM%, fees, etc. to allow the Technicians to finalize and deliver quotes directly to the customer.Partner with Sales on quoting to provide coaching on using the tool so they feel comfortable generating quotes. Build a relationship between the field and Sales organization for future partnering on PSA opportunities and larger retrofit opportunities.Place purchase orders with vendors based on execution needs for quote completion.Assist both internal and external customers on warranty related issues.What we look for:5 (five) years minimum hands on HVAC field mechanical tech experience required. Demonstrates a commitment to integrity and quality in business. Excellent initiative and interpersonal communications skills. Demonstrated ability to influence the market at key levels.Estimating#LI-AR1