Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Experience with installing mechanical equipment.Experience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O rings.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel, including globally, for extended periods of timeAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: Professional certifications in this field.Experience working with ValuesAbility to work collaboratively with unfamiliar teams.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-12061 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

$24.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise!What You’ll Do:You’ll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s LicenseMinimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $30.00-34.00!#QA Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. Rotating Shift: MondayTuesdayWednesdayThursdayFridaySaturdaySundayWeek 1NightNightOffOffDayDayOffWeek 2DayDayNightNightOffOffOffWeek 3OffOffDayDayNightNightOff Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentPerforms routine preventive maintenance checks on all production equipment and machineryRepairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserves and listens to mechanical devices in operation to locate causes of problemDismantles devices to gain access to and remove defective partsLubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantAccomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environmentTroubleshoot equipment failures to determine root cause and initiate appropriate remedial action.Repair of equipment to improve availability and reliability for production.Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays.Ensure preventative maintenance compliance and that repair history is properly documented.Assist in sourcing and requisitioning maintenance supplies, equipment, and services within budgeted guidelines.Performs other related duties as assigned Requirements: Three to five years of work experience in a manufacturing plant as a Maintenance Mechanic or TechnicianKnowledge and experience working with high-speed equipment and electric-pneumatic controls.Able to use both a MIG welder, and ARC welder.Able to order parts and maintain inventory of all maintenance-related material.Advanced working knowledge on mechanical/electrical systems and components; including, but not limited to, Pneumatic, Hydraulic, Pumps, Gear Boxes, Power Transmission, Material Handling, Sensor, Transmitters, DC and AC circuits, Transformers, Power and Energy, Arc FlashWorking knowledge and experience on Automation; Industrial Process and Control system; PLC; Measuring Devices; Instrumentation; Robotic Application; Bulk Handling SystemWorking knowledge and experience on Facility Maintenance (Roof, Dock, plumbing) and Plant Equipment (Boiler, Air Compressors, Ammonia/Freon/Glycol Refrigeration, HVAC, Ventilation, Cooling Tower, Condenser, Backflow preventer, Sprinkler and Fire Extinguisher, Wastewater System, )Planning, scheduling & assigning ability while well experienced in defining priorities, required skills & resources.Hold practical knowledge of Microsoft Office.Multitasked in a fast-paced environment with lots of changes in direction bases business requirement.Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiring

Powell in Houston is currently seeking a Senior Field Service Technician. Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of electrical distribution equipment across the US and Canada. This includes performing installations, preventative maintenance, and corrective maintenance. The ideal candidate thinks critically, can work well in a team setting, and is a problem solver. Field service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified service technicians are provided safety and technical training with full office support. Once qualified, technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, phone compensation, and company expense card.This position does not offer visa sponsorship now or in the future.Essential ResponsibilitiesAdhere to Powell's current safety and quality standardsComplete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing.Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service ManagerMaintain flexible work hours, which will include over time and periodic weekend supportMust be available to travel up to 85% of the year.Comply with Powell standard operating procedures, documentation processes, safety processes and protocols.Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric mannerAble to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects.DC / AC Switchgear and Power Control Room (Electrical Enclosure, Power Control Center) installations, in addition to trouble shooting, testing and repair of the same type of equipment.Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing.Perform regular inspections of any issued vehicle or calibrated equipment/tools.Provide support to services manufacturing group. May consist of construction, installation, wiring and testing.Minimum QualificationsField service technicians are required to have 4 years as a shop and / or field electrical / breaker technician.Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applicationsBasic knowledge of electrical air and surface creepage clearance requirements.Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project.Preferred QualificationsBasic familiarity with contactor and circuit breaker schematics (Preferred).Basic understanding of hi potential testing (Preferred)Basic understanding of low resistance testing (Preferred).Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred).NICET Level 1 certification (Preferred).HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified).NFPA 70E Trained (Preferred / Training can be provided).OSHA 10 / 30 Trained (Preferred / Training can be provided)Skills, Abilities & Other RequirementsDemonstrate basic knowledge in the design and manufacture of bus and structural modification projects.Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory.Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control roomsWorking EnvironmentThe Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows:Medium physical effort (lifting/moving up to 50 pounds)Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time.Work at heights greater than 10'.Work on ladders of all types.Work on scissors and bucket lifts (on occasion).In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment.More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.About UsIn our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications!Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. This is a Night shift- Overtime required Responsibilities & Requirements : Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Ability to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies.Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned.1st or 2nd shift available Preferred Experience / Skills: Multistage pump assembly experience, API BB3/BB5".Excellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.High School Diploma / GEDPrevious experience assembling API pumps Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11930 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

$20.00 - $24.00/hourSalary is determined by the applicant’s experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Become a member of our family-friendly Avis Budget Group enterprise.What You’ll Do:You will perform basic repairs on a wide variety of vehicle makes and models with minimal technical supervision, including some preventative maintenance (oil, lube and tire repairs) and depending on your technical expertise, warranty repairs. You may assist our experienced mechanics in complex repairs.Perks You’ll Get:Bi-weekly hourly wageOn-the-job training to expand your automotive abilities, help to obtain ASE CertificatesPaid time offMedical, Dental and Other InsuranceContribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget carsWhat We’re Looking For:High school diploma or equivalentValid Driver’s License and good driving recordMinimum 1 year auto repair experience, 1 ASE (ability to obtain 2 more ASEs in first year)Willingness to work in a mechanical shop with moderate or loud noise levelMust possess all tools required for auto repair and maintenanceBasic computer skills (typing, data entry)Flexibility to work all shiftsPrevious OEM experience a bonus!Who We Are Avis Budget Group is a leading provider of mobility options, with brands including Avis, Budget & Budget Truck and Zipcar. With more than 70 years of experience and 11,000 locations in 180 countries, we are shaping the future of our industry and want you to join us in our mission. Apply today to get connected to an exciting career, a supportive family of employees and a world of opportunities within our growing enterprise.The fine print:Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What You Will Do A Johnson Controls Security Technician is a troubleshooter and service expert possessing knowledge and experience in IP CCTV and access control. Candidate will possess strong verbal communication skills as they identify the needs of the customer and then inform them of next steps and processes to repair system as needed to return full functionality. Candidate will possess skills and experience to inspect said systems to ensure proper functionality and provide written or digital reports to customer and company as needed.This is an embedded technician position Monday - Friday, 8:00 am – 5:00 pm in central Houston.How You Will Do It Locate and alleviate trouble with damaged equipment or wiring.Readjust equipment, repair, or replace inoperative equipment and test for operation.Performs repair and/or inspections of IP CCTV and Access Control systems.Assists fellow service technicians with system repairs and completes minor repairs including battery replacement.Tests operation of system to the customer monitoring center to properly establish service connectivity.Complete all forms accurately and customer paperwork as required.What We Look For Required Texas Security License -Access Controller only.High level of Troubleshooting on relevant systems.5 years in low-voltage or security industry.Software house, Ccure certification.Valid driver's license with an excellent driving record.High school diploma or GEDAbility to pass thorough background and identity checks.Ability to read blueprints and schematic drawings.Ability to operate hand and power tools.Ability to unload ladder from fleet vehicle and climb ladder.Ability to always operate fleet vehicle in a safe manner.Ability to communicate and provide excellent customer service.Preferred Experience with Exacqvision.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, trouble shooting and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of three (3) years of practical working experience on Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units with strong HVAC/ mechanical troubleshooting experience.Able to repair centrifugal compressors, steam turbines, screw chillers system components.Travel maybe required 10% to 20% to support Branch Customers startup and commissioning activities as well as aftermarket service trouble shooting.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs and JCI’s STA to gain knowledge in HVAC products and sales quoting.You will work collaboratively with other local market mechanics.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doDo you have HVAC AIR-COOLED CHILLER experience We are looking for HVAC systems mechanics who have worked in commercial and industrial markets to join our team working with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a factory representative to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in commercial mechanical equipment and diagnostics. Responsibilities may include but not limited to repairs of air-cooled, centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired5 years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.Computer savvy with good verbal and written communication skills.EPA Universal Refrigerant Certification

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union.Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing.Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors.Able to use vibration equipment to trouble shoot drivelines.Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.You will work with other local market mechanics as well as Servicemen and apprentices.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.