Daily Thermetrics, a leader in high-quality manufacturing, is seeking a skilled QA Inspector. This role ensures product safety, reliability, and quality by independently performing inspections using advanced techniques to detect corrosion, defects and other conditions.
The QA Inspector conducts inspections, interprets findings and reports results per company and engineering standards, while effectively communicating with customers, engineering teams, and management.
Production positions may be assigned to either of the following full-time work schedules: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
Job Duties:
Maintain a safe, secure, and healthy work environment. Adhere strictly to QA standards and practices, as well as sales order and engineering requirements. Conduct all assigned QA inspections, testing, and calibration duties. Assist non-certified inspectors or new hires with on-the-job training and guidance. Perform or attain job-required Non-Destructive Testing (NDT) certification as necessary. Carry out inspections for which qualifications or certifications are held. Accurately interpret and report the results of inspections to relevant stakeholders.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. High school diploma or equivalent required Minimum 6 month’s experience in inspections in a manufacturing environment. Ability to work in Microsoft Word and Excel Ability to work with computers / computerized equipment Ability to read, understand, and communicate in English Ability to follow written or verbal, technical instructions Position is based at a manufacturing/fabrication, climate-controlled shop environment. Interaction with other Inspections employees, as well as engineers, supervisors and third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 75 pounds Must be able to walk and stand for majority of eight-hour work day Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop. Ability to maintain focus and multitask effectively Excellent communication skills, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)

Daily Thermetrics is a fast-growing manufacturing company, and we are looking for a dedicated Purchasing Assistant to join our team. In this role, you will support our purchasing and sales departments, ensuring that projects are completed safely, accurately, and within tight deadlines to meet both quality standards and customer expectations.
The Purchasing Assistant is an entry-level position that plays a key role in maintaining the smooth operation of our supply chain. You will be responsible for providing administrative and operational support, assisting with the preparation of key procurement documents, and tracking orders to ensure timely deliveries.
Support the Purchasing Department in preparing RFQs (Request for Quotation), RFPs (Request for Proposal), and purchase orders. Collaborate with the Sales team to obtain pricing from suppliers for RFQs. Assist in tracking open orders, updating procurement statuses, and maintaining detailed reports. Work with the Accounting team to resolve supplier invoicing discrepancies. Communicate with suppliers to address missed deliveries, short shipments, and other order issues. Contribute to team objectives by taking on additional responsibilities as needed.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High school diploma or equivalent (Associate Degree or B.Sc. in Supply Chain or related fields preferred) Minimum two years experience in a purchasing position Proficient in purchasing functions, supply and inventory management. Excellent communication, negotiation and interpersonal skills Must be a detail-oriented team player with ability to prioritize, multitask and work with minimal supervision Strong organizational skills, understanding of sourcing and the ability to maintain vendor relationships Experience with spreadsheet computer applications a must Dependable and Reliable production orientation Position is based at a manufacturing/fabrication shop, climate-controlled shop environment. Interaction with machine shop employees with varying experience, engineers, supervisors as well as third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 20 pounds Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Strong attention to detail Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop, as needed. Ability to maintain focus and multitask effectively Ability to communicate technical concepts and materials specifications, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Instruments is seeking an entry-level Machine Shop Helper to join our rapidly growing manufacturing team. This position will assist with the setup, parts delivery, monitoring, operation, cleaning of machines in machine shop. Shop Helpers are responsible for working in a cohesive team environment to ensure all production goals are in compliance with customer requirements. The successful Machine Shop Helper will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production & shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position.
Machine Shop Helper position will be on: Production Second Shift Monday - Friday 1:30 pm - 10:00 pm
This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Responsibilities: Machine Shop Helpers perform tasks that are necessary to the production process. Carry out assembly day-to-day work instructions to ensure accurate and timely production goals Read and understand work instructions. Assist with maintaining, operating, cleaning machines Maintain a clean, orderly work environment Contributes to team effort by accomplishing related results as needed
Qualifications: Team Work orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex, a division of Poly-America, L.P., a leading manufacturer of plastic products, is seeking a Maintenance Helper at its Mont Belvieu, Texas location. A successful candidate must be able to adjust to changing priorities and handle multiple tasks simultaneously.
Responsibilities: Assist with the observing mechanical devices in operation and listening to their sounds to locate causes of trouble. Dismantling devices to gain access to remove defective parts, using hoists, cranes, hand tools, power tools, and safety lock-out devices. Examining form and texture of parts to detect imperfections. Inspecting used parts to determine changes in dimensional requirements. Adjusting functioning parts of devices and control instruments. Repairing or replacing defective parts. Installing special functional and structural parts in devices. Testing the performance of devices. Lubricating and cleaning parts. Additional duties as become necessary and/or are assigned by management
Benefits: Competitive wages Comprehensive benefits package Paid vacations and holidays 401(K) On-site fitness facility and more
Qualifications: The ability to work in a fast paced environment Knowledge of and the ability to use basic hand tools Must be able to work rotating night shifts Must be able to adjust to changing priorities and handle multiple tasks Excellent written and oral communication and presentation skills Additional duties as become necessary and/or are assigned by management. 1-3 years of Industrial Maintenance experience preferred

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess:  Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of CNC machines, primarily lathes, to produce pump parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Second Shift Hours: 2:30 - 11:00 PM Responsibilities: Operating CNC Machines, primarily lather, or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications: Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: 5-7 years machining experience in a manufacturing or repair environment operating CNC lathes. Preferred Experience / Skills: EIA Program and Mazak TrollVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.HS Diploma / GED and 5-7 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11728 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

DOVER PRECISION COMPONENTS:Dover Precision Components ‘DPC’ (‘the Company’) is part of Dover Corporation’s (‘the Parent Company’) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently.WE DELIVER CUSTOMER SUCCESS Dover PrecisionComponents delivers products and services that enhance performance, improve safety, reduce carbon emissions,and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China.BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES.We are diligent in recognizing our employees’ needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPCWhat You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.Responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements.Interpret work instructions.Identify, select and install proper tooling for operations being performed.Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machinery.Understand applicable quality systems and perform necessary quality inspections.Adhere to all Waukesha Bearings policies and procedures.Apply principles of Lean Manufacturing to reduced setup times and improve productivity.Seek out and identify Continuous Improvement opportunities.Actively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.Create and maintain a team focused work environmentWhat You'd Bring:Skills:Must be able to perform each essential duty satisfactorilyPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gauges,Education and Experience:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Prior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contactfor assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.#LI-LM1

The Laboratory Quality Assurance Specialist develops, maintains, and monitors the quality management system for Laboratory Services. Responsibilities include evaluating/implementing patient safety initiatives, regulatory and accreditation compliance, risk management, and performance improvement. Works with other ancillary and patient care departments to develop plans and policies for improved quality outcomes throughout all phases of testing. Manages external proficiency program. Coordinates/Prepares reports for the department and performs activities that promote compliance within the laboratory and point of care testing sites. Facilitates an annual assessment of the Quality Assurance program for the laboratory. PEOPLE ESSENTIAL FUNCTIONSPromotes a positive work environment and contributes to a dynamic, team focused work unit that actively helps one another to achieve optimal department results. Collaborates with all members of the patient care team by actively communicating and reporting pertinent patient care information and data in a comprehensive manner.Teaches students, clinical staff, new employees and others as assigned by Manager. Monitors competency assessment completion.SERVICE ESSENTIAL FUNCTIONSOrganizes workload and sets priorities. Utilizes all available work time by assisting others and performing additional tasks.Analyzes and responds to client complaints, unusual incident reports and Risk Management inquires.QUALITY/SAFETY ESSENTIAL FUNCTIONSReviews all laboratory quality occurrence data; provides reports and graphical data to department management, clients and customers. Prepares quality reports to include specific monitors as defined by the Manager/Director.Manages laboratory proficiency testing program and tracks exceptions. Performs ordering, distributing proficiency testing samples to sections, routing results for review, monitoring results and initiating corrective action.Coordinates activities associated with point-of-care (POC) testing program throughout the hospital to include evaluation of equipment, policy development and implementation/monitoring of quality control.Prepares, implements, and initiates review of laboratory policy and procedures, performing literature searches as needed to promote compliance with regulatory agency requirements. Monitors Laboratory Services policies and procedures for review and sign-off of all policies.Coordinates activities associated with the preparation for laboratory and hospital surveys for everyday readiness. Facilitates follow-up for any deficiencies cited.Prepares presentations for committee meetings and educational programs. Facilitates discussions with staff and leaders in developing strategy and action plans for programs/projects.Coordinates the validation plan before the implementation of new testing and instrumentation.Maintains a safe environment within the Laboratory, following all policies and procedures for safety, hazardous materials, security and emergency preparedness.FINANCE ESSENTIAL FUNCTIONSAdjusts work schedule to accommodate departmental/organizational needs. Appropriately utilizes the time recording system.Uses resources efficiently; does not waste supplies.GROWTH/INNOVATION ESSENTIAL FUNCTIONSGenerates and communicates new ideas and suggestions that will improve quality or service.Seeks opportunities to expand learning beyond baseline competencies with a focus on continual development.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONBachelor degree in related fieldWORK EXPERIENCEMinimum of 4 years' experience in a clinical laboratory as a Medical Laboratory Scientist/Medical Technologist LICENSES AND CERTIFICATIONS - REQUIREDMust have one of the following required certifications: • Preferred Requirement - Certified as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or categorical certification by Board of Certification (ASCP) • Certified as a Clinical Laboratory Scientist by National Credentialing Agency for Laboratory Personnel (NCA) • Certified as a Medical Technologist by American Medical Technologists (AMT) KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going evaluations consisting of one or more of the following: skills, competency assessments and/or performance reviewsKnowledge of the functional discipline to be coordinatedKnowledge of departmental processes and proceduresSkill in planning, organizing and delegating functional activitiesSkill in coaching and developing the functional skills of othersExhibits strong interpersonal and team player skills with all levels of the healthcare team and assures delivery of excellent customer service to all patients, visitors, physicians and co-workersAdapts to multiple ongoing priorities including organizing heavy work flow with minimal supervisionStrong attention to detail and ability to achieve and maintain accuracyDemonstrates independent judgment and discretion to recognize problems, identify causes and take corrective actionPossesses basic computer knowledge; operates multiple computer systems to include, Hospital / Laboratory Information Systems and Office software to maintain patient and testing records and other related documentsDemonstrates the ability to work independently with little or no direct supervisionSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesSUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform NoScrubs NoBusiness professional NoOther (department approved) NoON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* TRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area May require travel outside Houston Metropolitan area Company Profile:Houston Methodist Cypress Hospital, scheduled to open in the first quarter of 2025, will be Houston Methodist's ninth hospital and will incorporate the most advanced technology available from the day the doors open. With 100 beds (at our opening; licensed for 276) and a prime location in the heart of the rapidly growing U.S. 290 corridor, the hospital will be equipped with technologically advanced innovations implemented during COVID, many of them designed to make patient communication with physicians, staff and families the very best and most effective in any health care facility. Even though the hospital won't be fully operational until 2025, we have several services and specialties opening in 2024.Houston Methodist is an equal opportunity employer inclusive of women, minorities, disabled persons and veterans.Equal Employment OpportunityHouston Methodist is an Equal Opportunity Employer.Equal employment opportunity is a sound and just concept to which Houston Methodist is firmly bound. Houston Methodist will not engage in discrimination against or harassment of any person employed or seeking employment with Houston Methodist on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. VEVRAA Federal Contractor – priority referral Protected Veterans requested.

Job DescriptionWe are Lennar Mortgage Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career. Lennar has been recognized as a Fortune 500® company and consistently ranked among the top homebuilders in the United States.Join a Company that Empowers you to Build your FutureLennar Mortgage is centered around personal growth, innovation, and diversity. We are looking for a new team member who shares our passion and dedication to bringing homeownership to life.At Lennar Mortgage, you’ll build your career with a Fortune 150 company that provides an excellent work environment, plenty of opportunities for advancement, and competitive benefits and compensation. Our success is a result of supporting and rewarding our team of elite professionals, who strive to exceed superior standards and exceptional services.Your Responsibilities on the TeamManage, mentor and develop branch personnel.Manage satellite branch office and increase overall market share, service and profits by soliciting new business and originating new loans.Monitor lender programs and requirements.Assist Loan Officers with training, sales meetings and openings as necessary.Provide coaching and promote a professional team effort.Provide support for problem solving. Create an interface with lenders, escrow, division escrow coordinators, design centers and sales agents and disperse information as needed.Receive leads daily and contact borrowers via telephone and email in an attempt to obtain their loan application. Prospecting Lennar Mortgage traffic.Solicit new business from Home Builders and Realtors.Originate new loans in accordance with the “Loan Officer” agreement, signed at the time of employment, to ensure all loans meet the guidelines of the Products and Policies manual.Be accessible to the buyers and associates and return calls in the same day.Build rapport with and maintain open lines of communication with borrowers, builders and realtors.Conduct initial mortgage application interview with borrowers.Assist in the pre-application process and follow-up with sales office on incomplete applications.Deliver the pre-qualification status to the communities and call with verbal status as required.Travel to communities to meet with borrowers and obtain loan applications.Package loans for upfront submission.Lock all loans with the borrowers in accordance with the Secondary Marketing Pricing and Rate Lock Policies and Procedures manual.Compile any missing data on the loan application, i.e., lot number, address, plan type, incentive, delivery time, etcMaintain reports to ensure complete exchange of information regarding loan status, monthly projected closings, commission, and expense reportsConduct weekly “Pipeline” meetings with processor(s) and keep the lines of communication openRequirementsThree years mortgage lending experience: originating, processing, closing and underwriting FHA/VA/Conventional loansAt least one year in a full-charge supervisory/management capacityAbility to maintain flexible work schedule, including evening and weekend workFour-year college degree (preferred)Valid driver’s licenseLife at LennarAt Lennar, Everything’s Included in our homes, and Everyone’s Included on our team. Our Everyone’s Included vision is to unleash the power of diversity within our workforce to drive innovation and sustainable growth. At Lennar, we are committed to fostering a supportive and enriching environment for our Associates, offering a comprehensive array of benefits designed to enhance their well-being and professional growth. Our Associates have access to robust health insurance plans, including Medical, Dental, and Vision coverage, ensuring their health needs are well taken care of. Our 401(k) Retirement Plan, complete with a $1 for $1 Company Match up to 5%, helps secure their financial future, while Paid Parental Leave and an Associate Assistance Plan provide essential support during life's critical moments. To further support our Associates, we provide an Education Assistance Program and up to $30,000 in Adoption Assistance, underscoring our commitment to their diverse needs and aspirations. From the moment of hire, they can enjoy up to three weeks of vacation annually, alongside generous Holiday, Sick Leave, and Personal Day policies. Additionally, we offer a New Hire Referral Bonus Program, significant Home Purchase Discounts, and unique opportunities such as the Everyone’s Included Day. At Lennar, we believe in investing in our Associates, empowering them to thrive both personally and professionally. Lennar Associates will have access to these benefits as outlined by Lennar’s policies and applicable plan terms. Visit Lennartotalrewards.com to view our suite of benefits.Physical & Office/Site Presence Requirements:Regular, in-person attendance at Company communities/job sites and offices during regular work hours is an essential function of this job. Requires the ability to work more than eight hours per day in the confined quarters of a construction trailer, the ability to operate a motor vehicle, read plans, climb stairs and ladders, bend, stoop, reach, lift, move and/or carry equipment which may be in excess of 50 pounds. Job may require occasional operation of construction equipment. Finger dexterity may be required to operate a computer keyboard and calculator.Lennar is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws.Lennar is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws.

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is hiring a Production Manager, (Packerhead Pipe Plant) 1st shift.Starting Pay: $100,000 - $110,000 Annual SalaryScheduled Shift: Monday - Friday 6 a.m. – 5 p.m. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBenefits eligibility 1st of the month following 30 days of employmentSafety Shirts after 90 Day Introductory periodSafety prescription eye wear programSafety work wear subsidy after 90 day introductory periodBonus ProgramsLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Production Manager. This position will be directly assisting in the overall administration and coordination of production. This position will be directly assisting in maintaining and enhancing the department’s critical deadlines in production and the management deadlines in administrative demands. Essential Functions: Staff crews with the appropriate type and quantity of personnel for safe and efficient methodsCoordinate and assure proper material deliveriesPlan work schedules of crews to assure conformance to estimated labor projections and project deadlinesPerform checks on setups and finished products for accuracy and conformance to plans and specificationsMonitor personnel for adherence to company policies and productivityProduce a quality product (including quality evaluations) that meets the customers’ expectations while ensuring that drawings and project specs are followedCommunicate with management and train subordinatesPerforms requirements to satisfy company procedures including administrative requirementsMaintain order and housekeepingPerform all occupational safety and hazard procedures in conjunction with all essential dutiesStrives for zero defects and incidentsEvaluate and develop personnelOther duties as assigned. Supervisory Responsibility This position requires critical thinking and working closely with production Crew Leaders and engineering to ensure that deadlines will be met. Required Education and Experience Bachelor's degree in related field - preferred, not required.5+ years working in Leadership role.Prior Packerhead Machine experience preferred. Knowledge of OSHA and demonstrated record of safety-focused leadership.Knowledge 5S process improvement.Understanding of quality standards and health and safety regulationsKnowledge of performance evaluation Proficient in MS Office and ERP software (experience with IFS a plus).Outstanding communication abilityExcellent organizational and leaderships skillsAttention to detailStrong decision-making skills and a results-driven approachBilingual - a plus, not required. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 40 pounds. Position Type/Expected Hours of Work A full-time position. Standard hours of work are Monday through Friday, 6:00 a.m. - 5:00 p.m. Hours and workdays are subject to change to meet business needs. Travel No travel required We are located at 5150 Jefferson Chemical Rd., Conroe, TX 77301*Must pass pre-employment physical and alcohol/drug testing* Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Have a valid driver’s license EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Dallas Equal Opportunity Employer, and we pride ourselves on recruiting, employing, training, compensating, and promoting regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law.

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is looking for a Production Associate Dricast Starting pay $17.00/hr1st Shift - Monday-Friday 5:00 a.m. - 4:30 p.m. What We Offer Top-tier Medical, Dental, and Vision BenefitsBenefits eligibility 1st of the month following 30 days of employmentWeekly PaySafety Shirts after 90 Day Introductory periodSafety prescription eye wear programSafety work wear subsidy after 90 day introductory periodBonus ProgramsLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Overview: Responsible for performing all functions necessary to produce precast concrete products efficiently and safely under supervision. Work in a team environment to accomplish the required tasks. Essential Functions: Stripping and cleaning formsAssist with responsibilities such as finishing, patching, building cages and operating equipment and performing general maintenance.Oiling forms.Always maintains neat and orderly work areas.Preparing and installing rebar or reinforcing wire.Placement of appropriate inlets and outlets.Pouring and finishing concrete in forms.Ensuring tools and work areas are clean during the day and at the end of each shift.Material movement such as carrying and replacing parts.Finish product in a quality manner free of cracks and imperfections.Other related duties as required. Required Education and experience: 1-Year Previous concrete experience preferred – not required.Must Be able to follow instructions or repair steps according to QC processes Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 75 pounds. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 5 a.m. to 4:30 p.m. OT will be required as needed. This position regularly requires weekend work.

Description Position at Conroe Concrete Products Inc Thompson Pipe Group is seeking Production Machine Operator Starting Pay: $18.00/hrSecond Shift: Monday 2:00 PM to 11:00 PM - Friday OT & Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com Thompson Pipe Group is currently looking for a Production Machine Operator. Overview: This position, Production Machine Operator is responsible for operating production machines to produce concrete products. Essential Functions: Operate equipment (MBK, Packerhead, Vibromac) efficiently to produce concrete products from raw material to yard stageInspect the quality of products according to standardsAssist in maintaining accurate and timely production goalsMonitor the operations of machinery and associated equipment and report any concerns or malfunctionsPerform machine set-up and clean-up and other functions associated with job changesMaintain housekeeping in assigned areaCross train on other aspects of production processPerform other duties as assigned Required Education and experience: Experience in a manufacturing/industrial environment required. Experience in the precast concrete/pipe manufacturing industry preferredAbility to read and interpret documents such as safety procedures, machine operating and maintenance instructionsAbility to maintain a high level of accuracy in all aspects of the positionCurrent Driver’s LicenseHigh School Diploma or GED equivalency preferredMust be able to perform basic math. Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud.Will work in varied outdoor environments (in all weather conditions - heat, cold, wet, humid, dry and/or dusty conditions).Exposure to cement, and other raw materials. Physical Demands While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; talk or hear. The employee must occasionally lift or move products and supplies, up to 75 pounds.Must be able to read, write and verbally communicate in the English language (Bilingual a plus)Must be able to wear a hard hat, safety glasses, steel-toed boots, and hearing protectionMust be able to sit and operate equipment for long periods up to 10+ hours per day Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 5 a.m. to 4:30 p.m. OT will be required as needed. Scheduled shift hours are subject to change to meet business needs. This position occasionally requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision BenefitsBonus ProgramsProfit SharingLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity! We are located at 5150 Jefferson Chemical Road, Conroe, Texas 77301 EOE/AA – M/F/Vet/Disability Thompson Pipe Group – Conroe is an Equal Opportunity Employer