Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

JOB DESCRIPTIONPersons employed as a GSE Mechanic is expected to:Inspect and maintain ground support equipment used in operations.Troubleshoot, repair and/or overhaul ground support equipment.Check and service ground support equipment with fuel, water, oil and hydraulic fluid.Diagnose problems using test equipment and applicable manuals.Build and assemble machines or mechanical components according to requirements.Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues.Conduct repairs aiming for maximum reliability.Perform thorough maintenance on machinery, equipment and systems.Clean and apply lubricants to machinery components.Replenish fluids and components of engines and machinery.Provide consultation on correct maintenance and preventative measures to machine or vehicle users.Keep logs of work and report on issuesCompletion of GSE paperwork as required.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert).RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Ability to read and comprehend instructions, short correspondence and memos.Write routine business correspondence.Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees.Deal with problems involving several concrete variables in standardized situations.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Excellent knowledge of machinery and hydraulic, electrical and other systems and their componentsAptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers)Ability to follow established procedures and practices and read instruction, blueprints etc.A strong commitment to all health and safety guidelinesVery good communication skillsA problem-solving abilityVery good physical strength and staminaQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experienceMinimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior GSE or heavy equipment experience preferred.Must have your own tools.Must possess valid driver’s license.Certification from a vocational school or completion of apprenticeship is a definite plus.Valid certification (ASE) preferred.Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Overview: Are you looking to have a successful automotive career at Reliable Automotive We are looking for General ServiceTechnicians to join our team. We are a growing company and if you come ready to give it your all, your hard work will pay off. We are looking for good people that can grow with us.As a Genearl Service Technician, you will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career.If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career.Pay: Up to $15 -$17/HR, DOEBenefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Safely transports customers to and from their place of residence or business using the company vehicle.Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle.Operates company vehicle in a safe and courteous manner obeying all traffic laws.Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines.Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager.While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition.Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Qualifications:High School Diploma or equivalentMust be at least 18 years oldPossess valid driver’s licenseAbility to work a minimum of five days, including Saturday'sPrevious automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there isALWAYS something to do.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out: https://youtu.be/pdZMNrDJviYWhat you will doHVAC Mechanical Project Team LeaderUnder general supervision, responsible for the overall execution and performance of mechanical retrofit projects. Responsible for following consistent and repeatable project management standardized procedures and processes and achieving financial results on assigned projects. Provides project coordination for day-to-day activities of Mechanics and sub-contractors. Secures new work and Change Orders from the existing customer base. Provides mechanical project estimating and estimating reviews. Acts as a technical resource for Sales. Responsible for overall project safety program compliance. The expectation is for the PTL to devote 50% of their time to development and 50% to project execution.How you will do itPlans, executes and manages assigned mechanical projects.Oversees the mechanical retrofit process to ensure that it is performed in accordance with Johnson Controls standard practices.Facilitates escalation of product related problems.Secures new work and change orders from the existing customer base.Estimates mechanical work and presents proposals to the customer. Acts as a technical resource for Sales.Assists sales in project development efforts and performs pre-bid reviews.Recruits, hires and supervises resources to staff the project team. Interfaces with the Truck Based team(s) to control manpower to proper staffing levels. Reviews and interprets contract Terms and Conditions.Coordinates with support teams on drawing layouts / detailing for proper job installation. Analyzes financial reporting systems and project schedules to proactively address potential problems and manage risk.Investigates solutions and establishes project recovery plans. Participates in monthly backlog review. Provides ongoing cost and estimate analysis reporting. Manages allocation of costs to financial reporting systems.Uses Johnson Controls standard tracking and reporting tools to effectively communicate project progress and financial status to management. Proactively investigates opportunities for improvements in the project scope that will result in value added change orders.Performs associated cost estimates, prepares proposals and secures customer acceptance. Responsible for asset management including collections, cost control, progress billings and payables.Oversees assigned projects for compliance with specifications, local codes and installation techniques. Consistently negotiate buy out of materials, equipment and subcontracts and resolve disputes.Manages material procurement, warehousing and logistics processes. Provides high quality written communications.Ensures project document controls comply with contract requirements and Johnson Controls standards.Develops and maintains viable long-term relationships with customers and subcontractors. Leads job progress meetings as required.Ensures subcontractors understand expectations of the project. Owns and manages project execution plan including updating the project schedule. Ensures close out transition to appropriate Johnson Controls Truck-based team is achieved.Coordinates performance of owner training requirements. Adheres to safety standards. Ensures that Johnson Controls team members, and subcontractors adhere to safety standards.What we look for Six or more years of comprehensive, technical and operational knowledge of the HVAC service business, particularly related to smaller fast track retrofit, remodel and tenant improvement types of projects.Leads assigned Mechanics on a portfolio of projects typically $3-4M in revenue.Two to four years of engineering or trade school training such as an engineering degree or equivalent is preferred.Installation and Service experience related to complex HVAC Mechanical systems and equipment is desired.Demonstrated verbal and written communication skills.Must have the ability to communicate technical information to a non-technical audience.Proficient in Project Management software and financial accounting systems. Strong Personal Computer capabilities in MS Office (excel, word, power point), Adobe Writer, Visio and basic Windows environment.

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Overview: ** HIRING NOW **Seeking experienced Automotive Mechanics / Automotive TechniciansPay: $27.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseCurrent ASE’s preferredAbility to work a minimum of five days, including SaturdaysMust be at least 18 years oldWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 3 years of practical working experience on air cooled and/or water-cooled chillers or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians and when necessary, provide on the job training.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 142 rates.Comprehensive benefits package provided by the UA Local 142.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doDo you have HVAC AIR-COOLED CHILLER experience We are looking for HVAC systems mechanics who have worked in commercial and industrial markets to join our team working with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a factory representative to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in commercial mechanical equipment and diagnostics. Responsibilities may include but not limited to repairs of air-cooled, centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired5 years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.Computer savvy with good verbal and written communication skills.EPA Universal Refrigerant CertificationPreferredExperience with YORK, and air-cooled Centrifugal applied equipment.#TechHiring

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized