SEARCH
GO
Engineering Jobs
Full Time
8/27/2024
San Antonio, TX 78208
(10.1 miles)
As a Process Engineer- NDT you will collaborate with internal Quality Management and Business units, as well as develop and continuously improve our NDT systems. You will combine technical experience and demonstrated success working with organizations inside and outside the company as well as leading a team of talented technical individuals.Key Responsibilities:Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the NDT method(s).Be capable of assuming technical responsibility for the NDT facility and staff.Select the method and technique for a specific inspection when needed with a thorough understanding of alternate NDT Methods, and related repair processes.Be capable of Preparing and verifying the adequacy of procedures and work instructions. Write, approve, and teach NDT procedures and work instructions for technical adequacy.Have a general knowledge of other NDT methods and product manufacturing/repair processes and inspection technologies used.Provide for the training, examination and certification of personnel. Conduct NDT for the acceptance of components as needed.Perform Internal and External Audits as needed.Be accountable for the development of personnel and training programs.Be responsible for the continuous training and oversight of Level 2 inspectors.Be responsible for continuous oversight of processes, equipment and inspection area condition.Ensure that all tooling is correct for the inspections required.Be accountable for all actions and maintain ethical behavior in all respects.Basic RequirementsASNT Level 3 Certification in a minimum of one of the following: PT, MT. Must have the ability to obtain ASNT Certification in both Methods within 6 months of start.Must be able to Certify as Level 3 per NAS 410 in both PT and MT within 6 months of start.5 - 10 years working as a Level 3 in an Aerospace setting or equivalent experience.Certification or knowledge of other NDT Methods a Plus.Basic computer and technical writing skills.Experience in Etch a Plus.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to sit and stand for prolonged periods.Working knowledge of production management computer system and other related internal control systems.Take on new duties as assigned.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero
Full Time
9/5/2024
San Antonio, TX 78226
(8.0 miles)
Overview: GovCIO is currently hiring for a Information Systems Security Engineer (ISSE) to perform tasks related to RMF, STIG implementation, ACAS, and other cyber-security activities. This position will be located in San Antonio, TX and will be an onsite only position. Responsibilities: Designs and implements information assurance and security engineering systems with requirements of continuity, operations security, cryptography, forensics, regulatory compliance, physical security analysis (including facilities analysis, and security management). Assesses and mitigates system security threats and risks throughout the program life cycle. Validates system security requirements definition and analysis. Establishes system security designs. Implements security designs in hardware, software, data, and procedures. Verifies security requirements; performs system certification and accreditation planning and testing and liaison activities. Supports secure systems operations and maintenance.Participates with the client in the strategic design process to translate security and requirements into technical designs.Configures and validates secure systems and tests security products and systems to detect security weakness; performs network scanning and vulnerability analysis.Ensures that the appropriate security features and safeguards have been implemented on all information systems as required by DoD/IC policy and directives, and industry best practices.Performs defense device system installation, configuration maintenance, account maintenance, signature maintenance, patch management, and troubleshooting of all implemented, maintained, and deployed systems.Provides security certification test and evaluation of assets, vulnerability management and response, security assessments, customer support and provides guidance on security issues.TheCyberSecurityAnalystwill provide technical expertise in the area of Compliance Reporting andRiskManagementFramework(RMF)Understanding of the system development lifecycle. Ability to provide guidance to government representatives.Experience implementing security controlsExperience executing STIGs and compliance standardsManage Assured Compliance Assessment Solution(ACAS) in a development environment. Maintain policies and initiate scans.Collaborate with system engineers to mitigate vulnerabilities discovered in scansMaintain Plan of Action and Milestones(POA&M)Compile information and provide support for continuous monitoring, security control assessments, Authorization to Connect (ATC) and Authorization to Operate (ATO)Coordinate with stakeholders to obtain, update, organize, maintain, and track requiredRMFdocumentation Qualifications: High School with 9+ years (or commensurate experience)Required Skills and ExperienceClearance Required: Active TS/SCIStrong understanding of RMF workflow tools like eMASS or XactaStrong working knowledge of programs working within Air Force network rules and guidesExpert understanding of STIGs, STIG Checklists, STIG Implementation, and POA&M for non-complianceExperience with network management tools, network engineering principles, network analysisComplete understanding of Assessment & Authorization processPossess an expert understanding of current computer security requirement and complianceExpert ability to maintain System Security and Risk Mitigation plansExcellent written/verbal communications skillsDoD 8570.01 IAT Level II (CCNA-Security, CySa+, GICSP, Sec+CE, CND, SSCP)Preferred Skills and ExperienceDoD 8570.01 CSSP Analyst (CEH, CFR, CySa+, GCIA, etc.)Experience with Tenable, Tanium, Splunk, Trellix, ServiceNow, LogRhythm#DSG #NSS #TMK Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $100,000.00 - USD $125,000.00 /Yr.
Full Time
9/17/2024
San Antonio, TX 78208
(10.1 miles)
Build your best future with the Johnson Controls Team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary starting at $72,000, sign-on and bonus plan!Paid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneCompany vehicleEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will do OurEarly CareerSales Engineering(BEST) Programis a 6-monthtechnical sales development programfor Recent College Graduates thatfocuses on creating market share by strategic selling Johnson Controls’HVACproducts and services to commercial customers.In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals.#BESTHow you will do it Estimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired: Currently pursuing a Bachelor’s degree in Business, Engineering or equivalent and graduating in December 2024 and or May/June 2025, Program starts June 2025Strong analytical ability to solve programs and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Mechanical or Industrial Engineering Degree, strongly preferredPrevious sales or engineering experiences through co-ops, internships, part-time or full-time jobs (preferred)Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Full Time
9/8/2024
San Antonio, TX 78208
(10.1 miles)
Build an Aviation Career You're Proud OfExplore a career where you're challenged and have access to exciting engineering projects that stretch your talents. You'll design and create new systems and technologies to help solve complex aviation problems. Our expert team and supportive leaders give you the trust and independence to do your best work.As a Special Process Engineer Paint seal and adhesive your will design, test, and implement advanced technologies to improve aircraft performance, safety, and reliability, so we continue to deliver excellent aviation solutions. You'll collaborate with other departments to ensure that our products and services meet the highest industry standards.Responsibilities:Accountable for team response on flight/product safety critical parts and processesLiaison with Enterprise Manufacturing sites regarding component repairs, inspection and complianceDrive best practice and business improvement opportunities through an Enterprise Network of Aerospace Professionals.Focal for multi-discipline OEM technical reviews, CAR actionsFocal for Repair Development project executionsFocal for Process Engineering Enterprise project support / compliance audits. Support special projects which may involve travel. Process Control and ImprovementAnalyzes, develops and recommends methods to meet production requirements, improve economy and quality, and reduce turn-around-times for products and/or processes with supporting cost analysis.Establishes, analyzes, and acts upon measures of performance related to processes.Investigates and initiates corrective action of problems and deficiencies relating to equipment and processes to reduce variation and improve reliability.Coordinates and interacts with the outside resources including contractors, equipment vendors, and supply vendors for process support, improvement, or repair development.Remains current with state-of the-art technologies and processes.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Education Requirements:University degree in Chemistry, mechanical or chemical engineering; or equivalent.Degree in Materials Engineering.Preferred SkillsAbility to develop a business case proposal for new productivity improvement technologies working with Operations and contractors for justifications, budget & timelineAbility to prepare a Technical Specification and Cost Benefit Analysis for procurement of capital equipment. Liaises with management in the procurement processAbility to define a plan for local Engineering to approve MRO repairs and equipment to Airworthiness RequirementsExperience in a leadership position Experience developing repairs with Aerospace OEMEffective time management and organizational skillsEffectively communicate in a professional mannerEffective at planning, team building, performing analytical evaluations, & decision making Required Skills:Working knowledge of 14 CFR 21, 43, 45, 121, 145 and Industry standards (AC7108, AC7109, AC7200, etc) for Chemical Process - Stripping, Cleaning, Plating, Painting and SealantsWorking knowledge of PC's in the current company operating system environment.Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Strong project management skills.Thorough knowledge of company process, company instruction and rework process instruction manuals.Thorough knowledge of aerospace materials and processes.Experience in an aerospace or manufacturing process engineering environment.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero
Full Time
9/13/2024
San Antonio, TX 78226
(8.0 miles)
Overview: GovCIO is currently hiring for an Information System Security Engineer (ISSE) to support the USAF at Port San Antonio, Lackland Annex. Candidate will be involved in designing, implementing and securing information systems, conducting risk assessments and ensuring compliance with security standards and best practices. Responsibilities: The ideal candidate primary function is:Support the authorization of systems through the Risk Management Framework(RMF) to get an Interim Authority to Operate (IATO) or ATOSupport the categorization of Information System(s) (IS) to be accredited through the RMF process and support the development of the System Security Plan (SSP)Support the determination and selection of the required and/or applicable security controls to include the development of Memorandum of Understanding (MOU) or Memorandum of Agreement (MOA) for external systems and the development and implementation of an IS Continuous Monitoring (ISCM) planSupport the implementation of selected security controls specified in the SSP to the IS and its environment of operationSupport the development, review, and approval of Security Assessment Plan (SAP) and System Assessment Report (SAR)Perform periodic security scans and remediating findings based on the scan resultsSupport the development of the Plan of Action and Milestones (POA&M) and the development and update of the Security Authorization Package (SAP)Perform periodic assessment of the IS' security controls and develop the periodic ISCM report Qualifications: Clearance: TS SCIHigh School with 10+ years (or commensurate experience)Active Top Secret/SCI eligible security clearanceVMware Certified Professional certificationTechnical training related to Information Technology, Cyber Security, Computer Science, or related disciplineAt a minimum, an up-to-date Information Assurance Technical (IAT) Level II baseline certification5 years' knowledge and experience in installing, maintaining, and using ACAS, HBSS, SCAP and other cybersecurity related toolsAt least HBSS or ACAS certification/training certificate or both (both courses are desired)Cybersecurity and IT related knowledge and experienceRMF knowledge and experienceProficiency in Microsoft Word, PowerPoint, ExcelDesired qualifications:Kibana and LogstashEvaluate-STIGMicrosoft Active Directory and Group Policy ManagementVMWare vSphere, vCenter, and Horizon ViewBoth HBSS & ACAS certification/trainingFamiliar with the evaluation/implementation processes for DISA STIGs to include Windows Server 2016, Server 2019, Windows 10 and VMWare ESxi hosts5+ years of experience with Microsoft Windows and Server configuration and administration5+ years of experience with implementing VMware, Linux, and Windows STIGs#NSS#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $108,000.00 - USD $120,000.00 /Yr.
Full Time
8/27/2024
San Antonio, TX 78208
(10.1 miles)
ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday
Full Time
9/8/2024
San Antonio, TX 78208
(10.1 miles)
What you will do The Senior Electrical Engineer leads custom electrical design work for chiller solutions products. This position will be responsible for lead designer as well as coach for junior engineers and has responsibilities for creating product technical solutions and delivering design details on schedule to manufacturing teams.This position is onsite and based at our San Antonio, TX, plant for our large tonnage Chiller products and solutions. Interested candidates must be commuting distance, or open for relocation.How you will do itInvestigates and analyzes product design proposals on electrical power panels, control panels, variable speed drives and wire harnesses in accordance with UL, NEC, CSA, and CE codes, then recommends solutions.Proficient in electrical design and able to conceptualize and implement design ideas into the product.Proficient at preparing, checking, and coordinating the release of documentation to support designs.Responsible for technical direction to application engineers, designers, factory operations, product marketing, and product technical service.Responsible for the on-time completion of projects.Continuously increases expertise on all aspects of chiller electrical design, theory, construction, operation, and applications.Proficient at selecting the most suitable electrical components.Uses standard and advanced technical and mathematical principles, theories, concepts, techniques, processes, and best practices in field.Advances expertise and applies regulatory codes such as UL, NEC, CSA, and CE codes.Strives for continuous improvement and teamwork in a global product development and process environment.Adheres to the Company’s Code of Conduct and Business Ethics standards.Serves as primary SME for Electrical / Power Electronics issues at the facility.Leads, teaches and coaches others in interpreting and understanding engineering drawings including electrical schematics.What you will needRequired Bachelor’s degree in Electrical EngineeringMinimum 8 years applicable experience with UL, NEC, CSA, and CE codesSkilled in analyzing electrical loads, designing power and control circuitry, reviewing control logic, and practicing mathematical theories and conceptsAdvanced knowledge of electrical components including motors, inverter drives, soft starters, contactors, and circuit breakersStrong electrical aptitudeJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Full Time
9/19/2024
San Antonio, TX 78208
(10.1 miles)
Build an Aviation Career You're Proud OfYour work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks.Work with the latest technologies and techniques in the aviation industry to source materials, manage inventory, and coordinate logistics. You'll ensure we have what we need to service our customers.As a Service Engineer (LEAP) you will provide interpretation and clarification of overhaul data; produces material review board, temporary overhaul data requirement, unit build standards, and engineering bill of materials documentation to support operational repair and overhaul processes.What you'll do:Recognize and understand flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participate in proactive risk analysis of flight/product safety critical parts and processes.Recognize and understand the Just Culture policy.Resolve technical problems beyond the scope of the product unit operations group; liaises with manufacturers.Perform engine and accessory test, performance analysis and troubleshooting.Prepare detailed work instructions for operations personnel, outside of routine overhaul procedures.Review service bulletins and manual changes and incorporates amendments into production.Review warranty claims and advises management on the disposition of assigned items.Provide written or verbal technical advice for customers; produces reports relating to product serviceability, repair summaries, warranty, failure analysis or product configuration.Provide technical support during the implementation of new processes; specifies tools and test equipment required; assists in training on the overhaul and test methods.Advise on repair and improvement schemes together with feasibility studies.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Education Requirements:Bachelor's degree in mechanical, Aerospace, Industrial, and Metallurgical Engineering or equivalent.Position Requirements:Good understanding of manufacturing methods, shop equipment and machining processes.Ability to read, understand and interpret blueprints, engine technical data and other maintenance program requirements and/or procedures from customers, OEMs, vendors/suppliers and regulatory agencies.Working knowledge of production management computer systems.Strong planning, organizational, analytical, leadership, decision making, oral and written communication skills.Thorough knowledge of company instruction, company process, temporary overhaul data revision and original equipment manufacturing manuals.In jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.Working knowledge of FAA 14 CFAR PART.121 and 145 regulations.Ability to represent the company with integrity at industry events.Experience in an aerospace or manufacturing environment.Preferred Requirements:Working knowledge of precision measuring instruments.Working knowledge of gas turbine engine and/or accessory theory and performance analysis.Working knowledge of PC's in the current company operating system environment.Working knowledge of production management computer systems.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.
Full Time
9/20/2024
San Antonio, TX 78243
(10.0 miles)
Overview: GovCIO is currently hiring for a Local Systems Engineer to provide support for the BluSCI network. This position will be located in San Antonio, TX and will be an onsite only position. Responsibilities: Gathers information concerning the capabilities and investigates the technical capabilities of local products and competing equipment and/or solutions; stays abreast of developments in hardware and software. Generates quantifiable requirements based on customer description, system planning and design, and ensures requirements comply through formal verification methods. Translates high level product development strategies into network and system requirement specifications and works with other engineering disciplines to develop lower level detailed implementation requirements. Establishes and coordinates development of standards, practices, and procedures as related to the overall network and system development. Customer liaison and support for development activities and to understand and shape requirements.Perform and provide technical solutions, guidance, and expertise for a variety of software and hardware taskings, including installation, removal, maintenance, configuration management, and restoration for all systems-based Enterprise Core Services Review and assess designs and proposed solutions for possible integration with existing or planned technologies focused on automation, enhanced effectiveness, and efficiency of capabilities Write technical reports and Standard Operating Procedures Provide support to all units, to include future expansion, increase in growth, and ensure the systems management environment functions effectively is executed and the deployment of all software used on the JBSA-Lackland network to include baseline images Develop all hardware and software technical solutions, implementation plans for acquisition requirements via the requirement tracking system used by the Government Review and develop IT technical solutions and implementation plans that cover deployment of a wide range of systems devices such as servers, software, network infrastructure, and operating systems Ensure all assigned requirements are tracked in Government approved Software systemsEvaluate vendor updates and patches as they come available and design installation methods using scripting (i.e. vbscript, powershell)Analyze vendor released and DoD software patches to ensure full compatibility with operational systemsAnalyze existing and emerging technologies to ensure the network stays on the leading edge of developmentDevelop project drawings using Visio drawing software as required by the projectBe responsible for updating software, validating licenses, and proper labelling and update of electronic software libraries and physical software media in accordance with current Government guidanceCoordinates the planning, design, and installation of equipment, using knowledge of engineering and programming as well as sophisticated instruments and computersInstalls all new hardware, systems, and software for networks Qualifications: High School with 3 - 6 years (or commensurate experience)Clearance Required: TS/SCIRequired Skills and ExperienceMust have CompTIA Security+ Certification Excellent written/verbal communications skillsProven ability to coordinate with stakeholders and collaborate with other team membersMust be knowledgeable of current technological issues and advancementsPreferred Skills and ExperienceService Now KnowledgeVisio KnowledgeMust be able to effectively communicates step-by-step solutions to end-users#NSS#AR Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $75,000.00 - USD $80,000.00 /Yr.
Full Time
8/28/2024
San Antonio, TX 78208
(10.1 miles)
BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
Full Time
8/28/2024
San Antonio, TX 78208
(10.1 miles)
BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.