Katy, TX • (29.2 miles) • Full Time • 9/10/2026

About CarvanaAt Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards.We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise.Think you've got

Bellville, TX 77418 • (30.2 miles) • Full Time • 9/10/2026

Benefits:Competitive salary Looking for experienced harvest floor processors for USDA-inspected meat processing facility in Texas. Looking for experienced candidates who desire industry growth. Desired experience includes the operation of a captive bolt pistol, skinning, head and weasand procedures, evisceration, brisket splitting, ring and tie bung, etc. Competitive pay. At this time, we are only looking for applicants that are experienced in the slaughter of cattle, swine, and sheep. Must be legal to work in the US. We are not hiring warehouse workers, forklift operators, drivers or anyone for entry level. Please do not apply if you do not have slaughter experience.

Stafford, TX 77477 • (40.3 miles) • Full Time • 9/10/2026

Kelly Scientific is seeking an experienced Cell Therapy Manufacturing Associate to support a client developing therapies that make a meaningful impact on the lives of patients with cancer. Title: Manufacturing Associate Schedule: Tues-Fri | 12pm-10:30pm Location: Stafford, TX (onsite) Rate: $34-35/hr. Contract Length: 12 months Core Manufacturing ResponsibilitiesServe as operator and/or verifier for cell growth and manipulation procedures, including cell enrichment, culture, cryopreservation, thawing, and washingPerform manufacturing activities in compliance with FDA Good Laboratory Practices (GLP), Good Manufacturing Practices (GMP), Good Tissue Practices (GTP), and standards including FACT, CAP, and CLIAAdhere to ALCOA++ and cGDocP requirements while maintaining accurate, compliant docum

Sugar Land, TX 77498 • (35.4 miles) • Full Time • 9/9/2026

About WelkerAt Welker, our mission is toBuild Something Greater. We are a family-owned manufacturing company based in Sugar Land, Texas, with over 70 years of experience delivering innovative solutions to the oil and gas industry.Our capabilitiesincluding ERP systems, 3D CAD design, and on-site manual and CNC machiningallow us to provide industry-leading products, turnkey solutions, and worldwide service.About the RoleWe are seeking a detail-oriented MechanicalSolutions Engineer to support engineering operations, product configuration, and cross-functional problem-solving throughout the organization.This role is ideal for an engineer who enjoys investigating issues, analyzing data, managing engineering workflows, and developing practical solutions for customers and internal stakeholders. Y

Sugar Land, TX • (35.9 miles) • Full Time • 9/9/2026

Schedule: Monday–Friday, 6:00 AM–2:00 PMJob Type: Contract to hireAbout the RoleWe are seeking an experienced Electronic Assembler to join a fast-paced electronics operation in Sugar Land, TX. In this hands-on position, you will assemble, solder, wire, test, and troubleshoot electronic components and printed circuit boards while maintaining IPC-A-610 workmanship standards.This opportunity is ideal for someone with excellent soldering skills, strong attention to detail, and experience reading electronic schematics.Key ResponsibilitiesAssemble electronic components and printed circuit boards according to schematics, engineering drawings, and work instructions.Perform through-hole and surface-mount soldering, including fine-pitch work.Complete wire bonding, cable harness assembly, crimping, a

Sugar Land, TX 77478 • (37.8 miles) • Full Time • 9/9/2026

SummaryWe are seeking a Material Qualification Engineer to support the evaluation and qualification of new materials introduced by the Sourcing Team. This role helps ensure materials meet technical, quality, and process needs before moving into production. You’ll develop and run qualification plans, perform material testing, and collaborate with teams across Sourcing, Quality, Manufacturing, and R&D.Job DutiesMaterial evaluation and testing: Design and execute comprehensive test plans to evaluate new materials’ mechanical, thermal ,electrical and optical properties. Perform root cause anlysis and material failure analysis if there is any.Qualification and documentation: Help to provide the detailed qualification reports, test data and validation documentations. Ensure material meets intern

Houston, TX 77099 • (39.8 miles) • Full Time • 9/9/2026

JOB #864-306Pacesetter Personnel Services is hiring an Assembler I / II in Houston, TX 77099.Job Description:Performs instrument assembly by following instructions on drawings and work instructionsAssemble medical devices and components according to detailed work instructions, blueprints, and specifications.Inspect parts and finished products to ensure they meet quality standards and regulatory requirements.Operate small hand tools, power tools, and specialized assembly equipment.Performs in- process inspection to ensure products meet specificationsWill be performing bead blasting operationsKeeping the work area clean, organized, and safeFilling out time sheets and all other required paperwork, relationships within the work teamJob Requirements:Must have 5 years of related assembly experie

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

Pay: $14.39 - $18.71 per hour Depending on experienceJob description:All shifts available! 1st, 2nd, and 3rdOverviewWe are seeking a skilled and dedicated Warehouse Associate to join our dynamic manufacturing team. This role requires mechanical knowledge and the ability to work effectively in a fast-paced environment.ResponsibilitiesOperate and monitor production equipment.Perform setup and adjustments on machinery to ensure optimal performance.Conduct visual quality control checks.Collaborate with team members on assembly line tasks, ensuring efficient workflow and materials handling.Maintain a clean and organized work area in compliance with safety standards.RequirementsExperience in a manufacturing or factory environment is preferred.Ability to work collaboratively within a team while a

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

Custom Air Products & Services, Inc. (CAPS)is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 1996, CAPS has built a reputation for delivering high-quality, custom-engineered solutions to customers across a wide range of industries.With a team of skilled professionals and multiple Texas-based facilities, CAPS provides end-to-end capabilities including HVAC manufacturing, mechanical field services, and parts distribution. As part of AirX Climate Solutions, we are committed to safety, quality, and customer satisfactioncreating a team-oriented environment where employees can grow, contribute, and support essential operations across the industries we serve.We

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

THE ROLERMS is seeking a Process Improvement Engineer. The Process Improvement Engineer supports, trains, and develops programs and initiatives to increase operational efficiency for a rotating machinery manufacturing and repair facilities. This position plays a key role in managing capital projects, integrating newly acquired facilities, and advancing a culture of continuous improvement that exceeds customer expectations and drives measurable business results.SKILLS REQURIEDORGANIZATIONAL - Leadership & Organization:Managing cross-functional teams and delivering measurable project outcomes.Experience managing capital projects.Ability to resolve conflicts effectively.Detail-oriented with a strategic perspective.Strong problem-solving and analytical abilities.INTERPERSONAL - Experience Requ

Sealy, TX 77474 • (16.3 miles) • Full Time • 9/9/2026

Vital Link, Inc. (VLI) is seeking experienced Sheet Metal Workers to support the construction, installation, and maintenance of USAF Noise Suppressors, Engine Test Cells, and Hush Houses. This is a 100% travel-based position supporting projects on military installations throughout the United States and, potentially, overseas.This role offers the opportunity to work on specialized aerospace and defense infrastructure projects while expanding your trade skills and advancing your field construction career.Job OverviewThe Sheet Metal Worker is responsible for the fabrication, installation, modification, and repair of sheet metal systems used in industrial, aerospace, and military facilities. This position requires the ability to interpret construction drawings, work with precision, and safely

Sealy, TX 77474 • (16.3 miles) • Full Time • 9/9/2026

Position Summary Shift: 4:00PM until 12:00AMDays: Monday - FridayHailiang Copper Texas, Inc. is seeking a Laboratory Technician to join our Quality Department at our manufacturing facility in Sealy, Texas. The Laboratory Technician will perform routine testing, inspection, and analysis of copper products and materials to ensure they meet company specifications, customer requirements, and applicable quality standards.This position works closely with Quality, Production, and Technical personnel to identify quality issues, maintain accurate testing records, and support continuous improvement throughout the manufacturing process.Essential Duties and Responsibilities Perform laboratory testing and analysis of raw materials, in-process materials, and finished copper products.Prepare samples for

Katy, TX • (29.2 miles) • Full Time • 9/9/2026

Pay rate: $20.00 - 22.00Description:Job Code: 82140311 The Assembler is responsible for assembling and testing products, and for troubleshooting and resolving issues. * Assemble components of all Product Lines. Select correct tools and fixtures. * Test assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products. * Ensure ability to: read blueprints; identify components; use pertinent hand tools and rework techniques; operate equipment, dimensioning and setting tolerances of mechanical parts and assemblies. * Create labor records for all transactions. * Use the guiding principles and tools of the Manufacturing System to drive continuous improvement.2 Years Electro-mechanical assembler experienceMinimum High School degree, Higher technical educa

Katy, TX 77493 • (32.1 miles) • Full Time • 9/9/2026

Job Title: AssemblerLocation:23500 Colonial Pkwy, Katy, Texas, 77493Duration: 12 monthsPR:$20.00 - 22.00/hr on W2Description:The Assembler is responsible for assembling and testing products, and for troubleshooting and resolving issues.* Assemble components of all Product Lines. Select correct tools and fixtures.* Test assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products.* Ensure ability to: read blueprints; identify components; use pertinent hand tools and rework techniques; operate equipment, dimensioning and setting tolerances of mechanical parts and assemblies.* Create labor records for all transactions.* Use the guiding principles and tools of the Manufacturing System to drive continuous improvement.2 Years Electro-mechanical assem

Houston, TX 77099 • (39.8 miles) • Full Time • 9/9/2026

What We're Looking ForBase Production Technician I will repackage bulk bases into smaller pack sizes as specified on work orders.What You Will Do• Follow written instruction on proper gowning, balance calibration, equipment operation, work order instructions and ensure that all data is documented accurately• Retrieve product and components for next scheduled assignment• Validate work orders and labels, verify documents and components are accurate and identical, and perform scale calibration• Accurately weigh bases, perform repackaging, and operate filling equipment at a rate comparable to established standards and expectations• Maintain and clean Production Rooms, equipment and utensils• Document on the work order all packaging and raw materials consumed in the repackaging process• Assist

Stafford, TX • (40.4 miles) • Full Time • 9/9/2026

This role focuses on building, testing, and inspecting mechanical and electrical components for military, law enforcement, and home theater engagement training systems. The position requires using hand tools, reading engineering drawings, and working under the guidance of senior assemblers to meet daily production goals.The duties are:• Assemble subassemblies and system components in accordance with work instructions, engineering drawings, and established quality standards.• Assist with the assembly of military-designated systems, Law Enforcement (LE) systems, and Home Theatre projector systems under the guidance of senior assembly personnel.• Perform basic mechanical and electrical assembly using hand tools and standard production equipment.• Conduct visual inspections and basic functiona

Houston, TX 77079 • (40.9 miles) • Full Time • 9/9/2026

Looking for a Centrifugal Compressor Mechanic / Rotating Equipment Specialist.Louisiana | Contract OpportunityWe are currently seeking an experienced Centrifugal Compressor Mechanic for projects in Louisiana.If your background is rooted in heavy industrial environments (such as Refining, LNG, Petrochemical, or Offshore Operations) and you excel at precision mechanical work, we want to connect with you.Qualifications: Experience with BCL, BCL2, and MCL centrifugal compressors Strong troubleshooting, maintenance, overhaul, and repair experience Experience with rotating equipment and turbomachinery Field service experience preferred Laser alignment experience is a plus TWIC Card preferred Must be authorized to work in the United StatesCandidates with experience on Dresser Rand / Siemens Energ

Hockley, TX 77447 • (42.6 miles) • Full Time • 9/9/2026

Revit OperatorLocation: Hockley, TX | On-Site Status: Full-Time / On-Site Position Summary - This is NOT a hybrid position. We are seeking a skilled and detail-oriented VDC Plumbing Designer to join our team. In this role, you will be responsible for developing and managing detailed 3D plumbing models, supporting BIM coordination efforts, and producing accurate shop drawings for a variety of multifamily residential projects. The ideal candidate will have strong technical expertise, a solid understanding of plumbing systems, and the ability to work effectively in a fast-paced, collaborative environment. Key ResponsibilitiesCreate, develop, and manage 3D plumbing models using Revit for BIM coordination and shop drawing production.Assist with material takeoffs and quantity tracking using Revi

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

FieldBridge is looking for a Instrument Tuber in Houston, TX to work for a worldwide provider of equipment and components used in oil and gas drilling and production operations.We offer weekly pay + benefits.Pay is $28 - $34/hr | Day & Night Shifts Available | 12-Hour Shifts | Weekly Pay Every Friday | OT Opportunity Available | At $28/hr and 50 hrs/week for example, earn weekly paychecks of approximately $1,610 gross.Position OverviewFieldBridge is looking for an Instrument Tuber in Houston, TX. This role supports rig equipment manufacturing operations, performing instrumentation and tubing installation in accordance with engineering drawings and work requirements. The ideal candidate brings hands-on Swagelok stainless steel tubing experience and a solid background in oil and gas environm

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

TruBlu HR Solutions is seeking an Assembler with at least 2 years of valve assembly or mechanical assembly experience for a position in the Houston, TX area. Will be responsible for assembling valve components and subassemblies, mounting actuators, fittings, and hoses, performing light fabrication, and inspecting and testing completed products to ensure quality standards are met. Must have experience using hand tools, air tools, torque tools, and measuring equipment, along with the ability to drill, tap, ream, and perform basic mechanical fitting as needed. Experience with valve repair, disassembly, troubleshooting, and rework in a manufacturing environment is required. Ability to read and follow written instructions, work safely in a shop environment, and lift and move valve components is

Houston, TX 77041 • (44.7 miles) • Full Time • 9/9/2026

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision.Layout, measure, fabricate and install tubing tray.Layout, measure, bend, cut, thread, ream and fit hard pipe systems.Install single line and group tubing and fittings.Able to layout and install pneumatic and hydraulic panels and end devices.Demolition of tubing and end devices.Knowledge of industry and American Petroleum Institute standards.Able to read relevant construction drawings.Knowledge of pneumatic and hydraulic control logic.Proficient in the use of tools of the trade.Able to recognize and avoid safety hazards and dangersAll above functions performed with minimal supervision.

Waller, TX 77484 • (41.2 miles) • Full Time • 9/8/2026

Job Description:Warehouse Positions: IMMEDIATE EMPLOYMENT OPPORTUNITIESWarehouse Positions Available: Trainable/Entry Level $13.50 - $14.00 ( 3 Different shifts available!!!!)General Labor/AssemblyWELCOME TO APPLY IN PERSON AT CORESTAFFPositions available in Waller TXAddress: 13611 Skinner Rd #260, Cypress, TX 77429Hours of Operation: Monday through Friday 8:00am - 4:00PMWalk in welcome, begin working ASAP!Available Schedule: Monday thru Saturday 8 to 10 hours shift (Schedule will vary based on production)1st, 2nd Requirements:· Must be at least 18 years of age· Able to lift 25 pounds· Able to use hand tools/screw guns to assemble components and have good manual dexterity· Assembly or warehouse experience is preferred but not required· Must be able to stand for 8 to 12 hour shiftsMust pass

Katy, TX • (29.2 miles) • Full Time • 9/8/2026

DescriptionCotton Holdings, Inc., is a diversified holding company with subsidiaries that provide property restoration and recovery, construction, roofing, logistical support, temporary workforce housing, and culinary services to public and private entities worldwide. Cotton combines this diverse suite of services with top talent, innovative technology, and a large inventory of company-owned assets, to offer clients a total solutions package in support of disaster events and large development projects, including complex work environments.Summary (Scope of the Job):Responsible for performing routine building maintenance tasks to include one or more fields (e.g. carpentry; electrical; heating, ventilation, and HVAC/Refrigeration) Plumbing, etc.); general systems cleaning and other tasks as a

Stafford, TX 77477 • (40.3 miles) • Full Time • 9/8/2026

Company Description:For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas.Specialties:As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include:Process Control & Safety SystemsControl Valves & RegulatorsIsolation Valves & Actuatio

Houston, TX 77079 • (40.9 miles) • Full Time • 9/8/2026

Job Summary:Use AutoCAD to create pipeline alignment sheets and plats, exhibits and permit drawings used to construct pipeline projectsPrepare design drawings with plan, section and detail format or plan and profile as designatedPrepare sketches of details not included on existing drawings to accurately reflect as-installed field conditionsPrepare drawings, forms, maps, and lists based on approved details provided by designers and engineersRequirements:2 - 5 years drafting experience or education equivalentProficiency in AutoCAD and legal descriptions draftingOil and gas industry experience requiredReading and understanding maps, plat maps, as-builts, construction drawings and gas service records for existing condition interpolationWorking knowledge of AutoCAD Civil 3DExperience with Route

Brookshire, TX 77423 • (25 miles) • Full Time • 9/7/2026

Job Type: Full TimeJob Location: HoustonSUMMARY:Performs product inspection to verify compliance with customer specifications, welding codes and material specifications. Initiates, documents, and monitors non-conformance reports to ensure products satisfy customers’ expectations. Maintains complete and accurate records of inspection activities.DUTIES AND RESPONSIBILITIES: The following statements are intended to describe the general nature and level of work being performed and are not to be construed as an exhaustive list of all responsibilities.Monitor all phases of work, from initial receipt of raw materials through shipment of the finished product to the customer.Perform dimensional verification relating to the fit of components and product configuration.Reviews plans, contract document

Sugar Land, TX • (35.9 miles) • Full Time • 9/7/2026

Wafer Process Technician(Tigrigna)| $15.00–$25.00/hr | Multiple Shifts Available | Multiple Openings:$15.00–$25.00–::Sugar Land, TexasDirect DepositPay CardThe Reserves Network401(k) ?(Cleanroom)Wafer Process Technician '

Hempstead, TX 77445 • (39.5 miles) • Full Time • 9/7/2026

Benefits:Health insurancePaid time offJob Title: Shop Helper/Material Processing Assistant Department: Production Team Reports To: Shop Supervisor Employment Type: Full-Time / Hourly Our Team: With over 50 years of experience in fire services, our staff includes firefighters who are stationed at some of the busiest departments in the country. We started this business with one goal in mind, to provide firefighters with the adequate tools they need to prepare them for real-world situations, keeping them alert and safe when on the job. Our team not only touts some of the most experienced firefighters, but also includes experienced fabricators to ensure our buildings exceed all design specifications and requirements. Position Summary: The Shop Helper supports daily operations in the steel fabr

Houston, TX 77095 • (42.8 miles) • Full Time • 9/7/2026

Duties and ResponsibilitiesRead and interpret shop work instructions and shop procedures.Produce machined components per sample or print.Operate CNC Lathe and CNC Milling machines with Fanuc and Mazatrol controls.Successfully complete Operator Safety Training of Powered Industrial Equipment Training Course.Overtime and weekend work required.Knowledge, Skills and AbilitiesAbility to stand, crouch, bend for 8-10 hour shifts.Must be able lift up to 40 Lbs on occasion.Basic computer skills.Problem solving skills.Ability to work as a team.Strong attention to detail.Excellent written and verbal communication.Education and QualificationsHigh School or GED required.Min 3+ years of experience as a CNC machine operator.Must be able to read, write and speak English.

Houston, TX 77043 • (43.2 miles) • Full Time • 9/7/2026

Company Description Boston Engineering is a technology-driven consulting firm that provides innovative engineering solutions to commercial and government clients. Headquartered in Waltham, Massachusetts, Boston Engineering specializes in product development, systems engineering, and technology commercialization, leveraging deep expertise in robotics, digital solutions, medical devices, diagnostic equipment, defense systems, and industrial automation. The company integrates advanced technologies with practical engineering execution, delivering end-to-end services from concept through commercialization. Boston Engineering combines technical rigor, cross-disciplinary teams, and proven processes to accelerate product development and to solve complex challenges. The company is ISO-certified and

Columbus, TX 78934 • (23 miles) • Full Time • 9/6/2026

Founded in 1956, Koy Concrete is still family owned and operated.Koy Concrete is hiring professional Mixer Truck Drivers for our Sealy, Fulshear, Katy, & Columbus Plants. We offer a competitive salary, an excellent benefits package, and the opportunity to work locally and be home at the end of your day. If you are interested in a new career with an established company apply today.Koy Concrete's Benefit Package includes the following:Competitive Pay.Medical Insurance.Dental Insurance.Vision Insurance.Company Paid Life Insurance.Company Funded Profit-Sharing.Paid Holidays.Personal Paid Time Off.Paid Uniforms.Batch Plant Operator Job Description:Position Summary:Primary responsibilities are to operate and maintain a concrete batch in good working condition. He will work with dispatch and mana

Cypress, TX 77433 • (40.7 miles) • Full Time • 9/6/2026

Reports To: General ManagerEdit Holdings LLC dba Tide Cleaners is seeking hardworking, team-oriented, and reliable individuals to join our wedding preservation production team. This position does not require any prior experience within the dry-cleaning industry but does require a commitment to learn and work within a team atmosphere.Duties & ResponsibilitiesDemonstrate company core values at all times: Guest Services, Excellence, Committed, Integrity, and Top Quality.Repair tears, apply buttons and beads to wedding gowns, trains, and veils.Work on fine fabrics, laces and intricate beadingMaintain a clean and well-organized work area at all times.Be able to operate all productions areas: assembly, boxing wedding dresses, label and shipping.Know the basics of pressing and be able to adapt to

Houston, TX 77042 • (42.5 miles) • Full Time • 9/6/2026

We are seeking an Instrument and Control SystemSeniorDesigner to join our project team in Houston, TX.This position will report to the Principal Engineer, Instrument and Controls.The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime.Responsibilities:I&C design/installation technical authorityEnsure contractor adheres to project and international standardsProvide design solution to upgrades and modifications on existing facilitiesAssist Commissioning and operation teams to troubleshoot and isolate control system issuesParticipate on Factory Acceptance TestsReview staffing and progress of assigned systems deliverablesReview and approve bulk material substitutions

Katy, TX 77493 • (32.1 miles) • Full Time • 9/6/2026

Position Overview:As a member of the Power Electronics systems manufacturing team, the QC Test Technician visually inspects all units to be tested (pre-power inspection), perform production line acceptance testing using a combination of manual and automated test equipment. With strong troubleshooting techniques, the technician should be able to identify problems during test and provide solutions.Duties and Responsibilities of the position include but are not limited to:Perform visual inspections on all product lines.Perform production line acceptance testing including insulation tests and function tests.Ability to work from detailed instructions, drawings, and procedures.Troubleshoot and provide results in a timely fashion (strong troubleshooting skills).Record test results and complete pa

Stafford, TX 77477 • (40.3 miles) • Full Time • 9/6/2026

As a machine operator you are responsible for loading and unloading parts and material to and from our machines, inspecting parts, packing, labeling, house keeping and more in this position.Responsibilities (Include but are not limited to):Operate assigned machinery throughout shiftMaintain product creation within designated cycle time at all times Communicate with leads and/or supervisors of any discrepancies or assistance needed Package finished product according to instruction; assure finished product meets quality and specificationsCorrect/separate good/bad products consistently Assemble finished product, if neededPromote and exercise safety by using Personal Protective Equipment (PPE) and follow all safety policies and procedures while in the plant Maintain cleanliness of area around

Houston, TX 77043 • (43.2 miles) • Full Time • 9/6/2026

Follow Shad on LinkedIn at #chalkboardtalk for videos on his open roles.Shad and His team at Robert Half is working witha manufacturing client that is looking for aSenior Cost Accountant to support a manufacturing operation in Houston, Texas. This position focuses on delivering accurate product costing, meaningful financial analysis, and reliable inventory reporting that helps leaders make informed business decisions. The ideal candidate brings strong expertise in standard costing within a production environment and can translate complex cost data into practical recommendations.Responsibilities:• Develop, maintain, and refine standard cost models for manufactured products to improve the accuracy of financial reporting and operational analysis.• Review material, labor, and overhead costs to

Houston, TX 77041 • (44.7 miles) • Full Time • 9/6/2026

Position Summary:This position is primarily responsible for the assembly of Headworks fabricated and purchased products.Essential Job FunctionsPerforms intermediate and final assembly of Headworks products including final functional testing.Reads drawings and utilizes measuring equipment to ensure all products conform to Headworks drawings and specifications.Records all time on the appropriate job orders at a high degree of accuracy.Performs all job duties at a high level of efficiency and with minimal rework.Works safely and accident free along with aiding co-workers to engage in safe work habits.RequirementsHigh School Diploma or equivalent.Proficient with the use of hand tools.Able to read drawings and assemble parts to specification.Good verbal and written communication skills.Team pla

Houston, TX 77041 • (44.7 miles) • Full Time • 9/6/2026

Reports to: Manufacturing SupervisorPrimary Responsibility: Support MIRATECH customers with work in our service center and warehouse. Operating equipment and support product creation and order fulfillment.Shift:Monday - Friday, 6:00 am to 3:00 pmWhat You'll Do:Operate manufacturing equipment, especially CNC press brakeOrganize materials using the forklift to transport themMaterial preparationOther duties as assignedWhat Qualifies You:High School Diploma.Good problem-solving skills and the ability to work independently or as part of a team.Ability to use welding equipment and related tools effectively and safely.Strong attention to detail and a commitment to producing high-quality work.Excellent communication and interpersonal skills.Must be able to lift up to 50 lbs. individually and heavi

Rosenberg, TX 77471 • (21.8 miles) • Full Time • 9/5/2026

? We are hiring an experienced CNC Programmer to develop, prove out, and optimize programs for our 5-axis milling centers and 9-axis mill-turn centers using Esprit EDGE. This is a hands-on role you will program the job, set up the machine, run the first article, and own the process through to production release. Strong candidates are programmers who came up through the shop floor and still like being on it.KEY RESPONSIBILITIES? - Develop CNC programs in Esprit EDGE for 5-axis simultaneous milling and mill-turn with B-Axis Swivel Head (turning, live tooling, sub-spindle, Y-axis)? - Import and work from customer models and prints STEP, IGES, SolidWorks, DXF, PDF? - Select tooling, design and specify workholding and fixturing? - Edit, tune, and maintain post-processors for Kitamura and Mori S

Cypress, TX 77433 • (40.7 miles) • Full Time • 9/5/2026

Want to be considered for this opening immediately? Call our office at !Job Title: Night Shift Quality ControlPosition Overview: The Night Shift Quality Control supports production operations during night hours by ensuring products meet company and customer quality standards. This role includes inspecting products throughout the manufacturing process, reviewing technical specifications and drawings, completing quality documentation, and assisting with communication between departments regarding quality-related issues, all while providing leadership and coordination for the night shift team.Responsibilities:Inspect products and components to verify that quality standards are met throughout the manufacturing processAssist with coordinating daily night shift inspection activities and workflow

Houston, TX 77042 • (42.5 miles) • Full Time • 9/5/2026

Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are:Community “We care for our communities”Integrity “We act with integrity”Passion “We infuse passion into everything we do”Quality “We believe quality comes from a culture of innovation and continuous improvement”Growth “We dedicate ourselves to personal and business growth”Raba Kistner is seeking an experienced SWPPP Inspector, to join our Environmental team in Houston, TX.The duties of the SWPPP Inspector will be to inspect construction activities to ensure compliance with environmental features of project plans and environmental commitments made to ou