Longview, TX • (33.7 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Longview, TX • (33.7 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Longview, TX • (33.7 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Longview, TX • (33.7 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Tyler, TX • (40.9 miles) • Part Time • 10/18/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Check out our many videos to learn more!http://

Longview, TX • (35.1 miles) • Full Time • $12.00 to $18.00 / hr • 10/17/2026

Electronics Assembler – Job Description Job Category: ProductionEmployment Type: Full-TimeEssential qualifications and skills include a strong reasoning ability and working experience using Microsoft Word and Excel. Excellent communication skills are required for work in a team environment and interaction with coworkers and customers. ***This job requires Excellent manual dexterity and hand/eye coordination**. Job ResponsibilitiesHand placement of components on circuit board (thru-hole or surface mount)Form parts according to specifications, using pliers, calipers, cutters, and forming toolsRead and understand electronic schematics, work orders and assembly instructionsRecord data onto work orders or shop travelerInspect to detect malfunctions, and ensure conformance to specificationsPack

Tyler, TX 75701 • (40.6 miles) • Full Time • $120,000 to $150,000 / yr • 10/17/2026

Job Title: Sr. Electrical Engineer Job Location: Tyler, TX What You'll DoDevelop electrical engineering deliverables including SLDs, load lists, calculations, cable sizing and routing, lighting layouts, and grounding/lightning protection systems.Perform short-circuit, coordination, voltage-drop, motor-starting, arc-flash, and lighting calculations using ETAP and SKM.Prepare and review specifications, data sheets, and material requisitions for MV/LV switchgear, transformers, motors, UPS, VFDs, and lighting systems.Ensure designs comply with NEC, UL, IEC, IEEE, API standards and coordinate with multidisciplinary engineering teams.Support vendor clarifications, review vendor drawings, and assist with construction, testing, and commissioning activities.Estimate man-hours for project proposals

Longview, TX 75602 • (30.9 miles) • Full Time • 10/17/2026

Position Title: QUALITY ASSURANCE SPECIALISTLocation: Longview, TXSalary: $60,000 - $80,000Other Forms of Compensation: NoneGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to ref

Pollok, TX 75969 • (40.7 miles) • Full Time • 10/17/2026

Process SuperintendentSummaryResource Erectors is seeking a Process Superintendent to join a team responsible for the commissioning and operational management of a minerals processing facility in the South Central United States. This role oversees froth flotation and gravity separation circuits, transitioning from technical project leadership to daily production and laboratory management. We require a leader with technical expertise in mineral beneficiation and the operational grit to manage industrial production.Key ResponsibilitiesCommissioning & Technical OptimizationSupport the initial commissioning and start-up activities for the facility, ensuring all physical separation systemsincluding flotation cells and gravity circuitsmeet design specifications.Evaluate plant layouts and structu

Pollok, TX 75969 • (40.7 miles) • Full Time • $22.00 to $24.00 / hr • 10/17/2026

QualificationsMinimum of 12 months of relevant experience in tree care, vegetation management, or a related field.Demonstrates proficiency in all skills, knowledge, and responsibilities required for lower-level positions.Strong verbal and written communication skills, with the ability to interact professionally with customers, utility personnel, and Arbor Resources, LLC employees.Ability to read maps, interpret work locations, and efficiently route crews to job sites.Provides guidance and on-the-job training to less experienced employees, promoting safe work practices and skill development.

Longview, TX 75604 • (35.3 miles) • Full Time • $14.00 to $18.00 / hr • 10/16/2026

Benefits:Competitive salaryFree uniformsOpportunity for advancementPaid time offTraining & developmentNOW HIRING: Electronics Restoration TechnicianFRSTeam of the Ark-La-Tex | Longview, TXPosition: Electronics Restoration Technician Job Type: Full-Time Compensation: Competitive Pay Based on Experience About Us FRSTeam of the Ark-La-Tex is a professional restoration company specializing in the cleaning, restoration, and recovery of electronics, textiles, and personal property affected by fire, smoke, water, and other property damage. We take pride in helping homeowners and businesses recover their belongings following unexpected disasters. We are seeking a dependable, detail-oriented Electronics Restoration Technician to join our growing team. Position Overview The Electronics Restoration T

Kilgore, TX 75662 • (27.2 miles) • Full Time • $20.00 to $24.00 / hr • 10/16/2026

POSITION SUMMARYPrograms, sets up, and operates CNC machinery to manufacture complex precision parts for drilling and geotechnical equipment, ensuring dimensional accuracy and quality.ESSENTIAL DUTIES & RESPONSIBILITIES- Program CNC machines using G-code and/or CAM softwarePerform complex setups, including fixturing, tooling selection, and offsetsMachine close-tolerance parts from steel, aluminum, and specialty alloysInspect finished parts to blueprint specificationsTroubleshoot machining issues and implement corrective actionsMentor CNC Operators and AssistantsMaintain accurate production and inspection recordsREQUIRED QUALIFICATIONS- High school diploma or GED3+ years CNC machining experienceProficiency in G-code programmingAbility to work to tight tolerances (±0.001")PREFERRED QUALIFICA

Jacksonville, TX 75766 • (32.2 miles) • Full Time • $20.00 to $27.00 / hr • 10/16/2026

Lead with purpose. Build what’s next. Imagine stepping onto the floor at 2:30 pm with a clear plan. Materials are staged, the team is briefed, and your lines are set to deliver. You’re the catalyst who keeps production safe, steady, and on-specaligning people, processes, and equipment to meet customer expectations and Teknor Color Company quality standards. Your mission Own daily output while anticipating tomorrow’s production needsGuard quality: apply standards from customers and Teknor Color CompanySecure and confirm batch cards for each productMaintain safe operation of all machinery; jump in to troubleshoot or run equipment as neededWork shoulder-to-shoulder with operators to minimize changeover time and maximize flowCapture accurate shift results in the daily production reportChampio

Longview, TX 75604 • (35.3 miles) • Full Time • $68,000 to $73,000 / yr • 10/16/2026

Job SummaryResponsible for the efficient operation of a section or depart of the repair shop. Supervise and coordinate activities of hourly employees involved in car repair and car maintenance operations including production methods and processes and proper use of materials, tools, and equipment.Job DutiesReview car work orders to assure all AAR and AITX procedures are followed throughout the repair processCoordinate hourly employees to assure car repair timelines are followed and all repair activities are completed as efficiently as possibleMonitor work in process to assure quality and time standards are being met for all car repairsAssist General Foreman - Production in resolving personnel problems, advising in disciplinary proceedings, conduct grievance hearings and safety meetingsRecom

Longview, TX • (35.1 miles) • Full Time • 10/15/2026

Role: Production ManagerLocation: Longview, TXSalary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k.Summary:This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals.The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains.In addition, the role supports financial planning activ

De Berry, TX • (37.5 miles) • Full Time • 10/15/2026

CDR ProSource is seeking dedicated Bilingual Production Worker to join our dynamic team in a galvanizing shop in Waskom, TX. This position is ideal for a reliable, hands-on individual who can support production processes and work effectively in a fast-paced industrial environment. The ideal candidate is motivated, dependable, and committed to maintaining safety and quality standards. Job Details Job Type: Full-Time Location: Waskom, TX Pay Rate: $14 per hour Schedule: Monday – Friday, 1st Shift (6:00 AM – 5:30 PM) Key ResponsibilitiesUtilize hand tools for various assembly and fabrication tasks as requiredCollaborate with team members to meet production goals and deadlinesReceive and move heavy metal parts throughout the facilityClean and prepare parts by removing corrosion, rust, and othe

Marshall, TX 75670 • (41.5 miles) • Full Time • 10/15/2026

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector.We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us.Make Your Mark at Prysmian Group - Join UsTeam Overview and Job Responsibilities:What You'll Do:The

Longview, TX 75601 • (34.2 miles) • Full Time • 10/15/2026

Outside Plant Tech IJob Type: Full TimeDUTIES AND RESPONSIBILITIES:• Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping.• Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards.• Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground• Help perform fiber tests with OTDR’s, visible light source and meters.• Assist in the installation of fiber optic communication equipment and Inside plant patch panels.• Install aerial and underground enclosures and other fiber related telecom equipment.• Must

Carthage, TX 75633 • (26.2 miles) • Full Time • $18.00 / hr • 10/15/2026

Training & Quality Specialist (Janitorial QC / Field Trainer)DNC Facility Services · Full-time · $18.00/hour to start · Ark-La-Tex area, travel between sites requiredSchedule: Monday–Friday, evening shift (2:00–10:30 PM) Weekends off.Why This Job Is DifferentLove teaching people how to do it right? Tired of being the one who covers every call-out? This one's for you.DNC Facility Services has been cleaning commercial buildings since 1982, and we're growing fast. We just built a brand-new training standard, and we need someone to bring it to life across every site we clean.This isn't a cleaning job, and it's not a fill-in role. You'll be the person who trains our trainers. You'll certify our Team Leads and senior techs, coach them in the field, and make sure every new hire at every site lear

Kilgore, TX 75662 • (27.2 miles) • Full Time • $20.00 to $25.00 / hr • 10/15/2026

Description: POSITION SUMMARYPrograms, sets up, and operates CNC machinery to manufacture complex precision parts for drilling and geotechnical equipment, ensuring dimensional accuracy and quality.ESSENTIAL DUTIES & RESPONSIBILITIESProgram CNC machines using G-code and/or CAM softwarePerform complex setups, including fixturing, tooling selection, and offsetsMachine close-tolerance parts from steel, aluminum, and specialty alloysInspect finished parts to blueprint specificationsTroubleshoot machining issues and implement corrective actionsMentor CNC Operators and AssistantsMaintain accurate production and inspection recordsRequirements: REQUIRED QUALIFICATIONSHigh school diploma or GED3+ years CNC machining experienceProficiency in G-code programmingAbility to work to tight tolerances (±0.0

Hallsville, TX 75650 • (35.8 miles) • Full Time • 10/15/2026

GrayWolf is seeking a Project Controls Engineer in Hallsville, TX - This is an On-Site Role with Competitive Pay, Paid Time Off, Per Diem Eligible >60-milesGrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a

Longview, TX 75605 • (39.4 miles) • Full Time • 10/15/2026

W&B Service Company has an excellent opportunity for a Transport Refrigeration Technician. We are the largest transport refrigeration dealer of Carrier Transicold, a world leader in Truck, Trailer and rail refrigeration systems. We are also the nation’s largest full service Hyundai Translead trailer dealer. We have 21 facilities throughout the Southwest, including Texas, Arkansas, Louisiana and Oklahoma.Duties will include:Perform diagnostics and repair starting and charging system, cooling and re-charge, and electrical including common fault codes. Repairs include performing leak detection procedures, compressor replacements, soldering refrigerant lines, evaporator/condenser replacements and front & rear main engine seal replacements.Perform repair and maintenance on reefer units in accor

Longview, TX 75605 • (39.4 miles) • Full Time • 10/15/2026

This position requires extensive travel, with assignments lasting multiple weeks at a time.Daily per diem and hotel accommodations are provided during travel.About the Role:You will help protect critical infrastructure by monitoring, testing, and maintaining corrosion control systems. Depending on your experience level, you may assist with basic field testing or lead advanced inspections, troubleshooting, and program management. this position involvesfieldwork, travel, and working outdoors in varying conditions.Minimum Qualifications:Ability to follow detailed instructions.Good communication skills and ability to work collaboratively in a team environment.Physical ability to handle tools and equipment, including lifting and standing for extended periods.Willingness to work outside and the

Longview, TX • (35.1 miles) • Full Time • 10/14/2026

WHAT IS ON OFFERAlfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s.ABOUT USAlfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries.We have honed & carefully crafted ou

Tyler, TX • (40.9 miles) • Full Time • 10/14/2026

EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visitwww.eyecare-partners.com.Job Title: Quality Assurance Supervisor- ClaimsMUST LIVE IN ONE OF OUR 18 States: Missouri, Florida, Kansas, Kentucky, Pennsylvania, Virginia, New Jersey, Texas, Minnesota, Michigan, Oklahoma, Alabama, North Carolina, Georgia, Illinois, Ohio, Indiana, ArizonaJob SummaryThe Supervisor for RCM QA Charge Posting

Longview, TX 75601 • (34.2 miles) • Full Time • $1,200 to $6,000 / mo • 10/13/2026

Benefits:Opportunity for advancementTraining & developmentLEGIT PRODUCTIONS LLCTexas Division PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater respo

Wells, TX • (38.7 miles) • Full Time • 10/12/2026

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our teamas we grow. Job Title: Natural Gas Distribution Inspector Level 1-4Location: Mineral Wells, TXLevel 1 Key Responsibilities- Perform inspections on pipelines to assess their structural integrity, safety, and compliance with industry regulations. Prepare detailed inspection reports outlining findings, recommendations, and necessary repairs. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite

Tyler, TX • (40.9 miles) • Full Time • 10/10/2026

Company Description Location:Tyler, TXPay:Pay Rate $30.71/hourShift:5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship.Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment to produ

Tyler, TX 75702 • (42.9 miles) • Full Time • 10/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Kilgore, TX 75662 • (27.2 miles) • Full Time • 10/8/2026

Revolution is now hiring for an Extrusion Manager position in Kilgore, TX. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.RESPONSIBILITIES/ DUTIES:Directs and coordinates activities of production department(s) in processing materials or manufacturing products in industrial organization by performing the following duties personally or through subordinate supervisors.Analyzes production schedule to estimate worker hours and create machining schedules that meet both internal and external customer needs.Reviews production schedules to ascertain product data such as types, quantities and specifications of products and scheduled delivery dates in order to plan department operations and establishes priorities and sequences for manufac

Kilgore, TX 75662 • (27.2 miles) • Full Time • $21.47 to $36.81 / hr • 10/8/2026

DescriptionHOLT CAT in Kilgore, Texas is looking for a experienced Machinist for our heavy construction equipment shop. The Machinist performs all standard machining repairs on heavy equipment or components in a shop environment. Demonstrates a willingness to help in other areas when needed. Must be able to lay out tasks, reads and interprets blueprints and technical publications, designs and draws working sketches. Hours for this position are Monday through Friday 7am to 4pm. We are located at 3007 Maverick Drive, Kilgore, Texas 75662.Key ResponsibilitiesModels, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and MissionDemonstrates well developed technical skills and per

Longview, TX • (35.1 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Tyler, TX 75707 • (33.8 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Kilgore, TX 75662 • (27.2 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Longview, TX • (35.1 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Marshall, TX 75672 • (39.8 miles) • Full Time • 10/5/2026

American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 450+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 1st Shift Millwright/Industrial Maintenance Tech (Manufacturing)role in our Marshall, Texasfacility.JOB SUMMARYThe Millwright/Industrial Maintenance Tech will operate in a safe and efficient manner of troubleshooting and repairing equipment and machinery. The primary duties include:MAINTENANCEPerforms scheduled maintenance repairs of production equipment and provides emergency/unscheduled repairs of production equipment during production. Prepares a

Tyler, TX 75706-6031 • (40.9 miles) • Full Time • $21.00 to $23.00 / hr • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Longview, TX • (35.1 miles) • Full Time • $90,000 to $115,000 / yr • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX 75703 • (39 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Kilgore, TX 75662 • (27.2 miles) • Full Time • $21.47 to $36.81 / hr • 10/2/2026

DescriptionJob Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals.Mid-level position – Generally has a minimum of four years of experience and/or demonstrated job relevant knowledge/skills and has obtained welding certifications in the FCAW and GMAW welding processes (1-4 G/F). The MFG Welder 3 has moderate

Longview, TX 75602 • (30.9 miles) • Full Time • 10/2/2026

Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient preparation and ti