Please Accept our Privacy Policy
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Full Time • $16.50 to $17.50 / hr • 10/20/2026
Applied Metallurgical is seeking a dependable, hardworking Molding Team Member to help produce the molds used to manufacture iron castings. This entry-level position offers hands-on training and room to take on greater responsibility as your skills develop. No prior foundry experience is required. Bring a willingness to learn, a strong work ethic and a commitment to working safely. Job Duties Include: Prepare patterns, flasks, and molding equipment for production. Assist with filling, compacting, and preparing sand molds. Apply mold coatings and perform finishing work according to established procedures. Position cores and assist with assembling and closing molds. Inspect molds for damage or defects before pouring. Stage completed molds and materials to support the production schedule. Kee
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Full Time • $16.50 to $18.50 / hr • 10/20/2026
Applied Metallurgical is looking for a Melt Technician who’s not afraid of hard work and heat. This is a hands-on role working directly with molten metal, induction furnaces and heavy equipment to keep production moving safely and efficiently. All safety wear is provided. Job Duties Include: Work with the plant metallurgist to build and charge melts Weigh alloys and scrap for furnace charges Run coreless induction furnaces, pumps, and cooling systems Take molten metal samples and pour heats using overhead cranes Repair and maintain refractory in furnaces and ladles Qualifications: Forklift certification or experience Bobcat / skid-steer experience preferred Safety-first mindset with experience around molten metal Solid math skills for charge calculations Comfortable using hand tools
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Full Time • $25.00 / hr • 10/20/2026
Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform weld
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Full Time • $16.00 / hr • 10/7/2026
Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and report
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benefits: Only
Applied Metallurgical
Gilmer, TX 75644 • (31.6 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic machTaskrabbit
Terrell, TX 75161 • (41.6 miles) • Contractor • 11/16/2026
Taskrabbit is looking for capable, self-motivated individuals to join our global network of independent service providers, who we call Taskers. In this role, you'll help clients assemble a wide range of furniture items, from simple chairs to bed frames or larger modular systems. Whether you have prior assembly experience or are just confident with your IKEA assembly experience, joining our platform allows you to flexibly run your own business by setting your own rates and accepting assembly tasks that match your level of experience. As a Tasker, you have the freedom to choose where and when you work so you can build a career that fits your lifestyle. The Taskrabbit Platform offers you an opportunity to grow your skills and develop a network of loyal clients. Please Note: This is not an empJayes Tech LLC
Tyler, TX 75701 • (24.7 miles) • Full Time • $120,000 to $150,000 / yr • 11/18/2026
Job Title: Sr. Electrical Engineer Job Location: Tyler, TX What You'll Do Develop electrical engineering deliverables including SLDs, load lists, calculations, cable sizing and routing, lighting layouts, and grounding/lightning protection systems. Perform short-circuit, coordination, voltage-drop, motor-starting, arc-flash, and lighting calculations using ETAP and SKM. Prepare and review specifications, data sheets, and material requisitions for MV/LV switchgear, transformers, motors, UPS, VFDs, and lighting systems. Ensure designs comply with NEC, UL, IEC, IEEE, API standards and coordinate with multidisciplinary engineering teams. Support vendor clarifications, review vendor drawings, and assist with construction, testing, and commissioning activities. Estimate man-hours for project propEast Texas Cooling Systems
Longview, TX 75604 • (38.8 miles) • Full Time • $27.00 to $40.00 / hr • 11/18/2026
Benefits: 401(k) Competitive salary Health insurance 401(k) matching Dental insurance Paid time off Job Summary: We are seeking a skilled and experienced Commercial Refrigeration Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing commercial refrigeration systems in various settings such as supermarkets, service stations, and industrial facilities. Benefits/Perks Competitive pay based on experience. Health, dental, vision, supplemental and life insurance. Paid time off (PTO). 401(k) retirement plan with company match. Company-provided vehicles, some tools, and phone allowance for work purposes. Responsibilities: Install, repair, and maintain commercial refrigeration systems. Diagnose and troubleshoot mechanical failures in HVAC anTovya Group Inc
Longview, TX • (42.6 miles) • Full Time • $12.00 to $18.00 / hr • 11/18/2026
Electronics Assembler – Job Description Job Category: Production Employment Type: Full-Time Essential qualifications and skills include a strong reasoning ability and working experience using Microsoft Word and Excel. Excellent communication skills are required for work in a team environment and interaction with coworkers and customers. *** This job requires Excellent manual dexterity and hand/eye coordination**. Job Responsibilities Hand placement of components on circuit board (thru-hole or surface mount) Form parts according to specifications, using pliers, calipers, cutters, and forming tools Read and understand electronic schematics, work orders and assembly instructions Record data onto work orders or shop traveler Inspect to detect malfunctions, and ensure conformance to specificatiAtlas Field Services
Tyler, TX 75702 • (21.7 miles) • Full Time • 11/18/2026
Who You Are: You’re energetic and enjoy working outdoors. You understand that this space can be demanding, and you are equipped with the skills necessary to get the job done. You have at least seven years of combined experience. Bachelor’s degree with 3 years of field experience. Associate degree with 5 years’ experience. 7 years of utility vegetation management experience. We’re dedicated to the growth of our employees . We truly believe in your development. For those who show initiative, we will do what it takes to get you where you want to go. We’re growing but still maintain an entrepreneurial spirit . We give you room to be accountable and responsible in your role. We believe progress is bred through innovation and we encourage our employees to bring their ideas forward. We’re safetyCAVA - Tyler
Tyler, TX 75703 • (29.6 miles) • Full Time • $16.00 / hr • 11/18/2026
Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Positivity – Every one of us can change someone’s day for the better. Transparency –We use transparency to help us make decisions through open dialogue Humility – We can always find ways to improve. Fanaticism – We are passionate about the opportunity to turn every guest into a fanatic. Thoughtfulness –We go above and beyond for our guests, our teams and communities. The Role: Team members are responsible for creaVolkert Inc
Tyler, TX 75702 • (21.7 miles) • Full Time • 11/17/2026
Are we the road to your future? We are currently searching for an experienced Entry Level Structural CAD Technician to support our Southwest Region located in Texas. To be considered for this position, applicants musthave, at minimum, a degree in Computer Aided Drafting or similar field. What you’ll be doing: Provide assistance to engineers using OpenBridge Designer to create bridge detail plans and perform minor design work on bridge projects Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans Implementation TxDOT Bridge Detailing Manual and TxDOT Bridge Standards Coordinates assignments with project team and supervisor Perform other duties as assigned by supervisor Be a team player and assist other groupsDXP
Tyler, TX • (24.7 miles) • Part Time • 11/17/2026
Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! -us/cJ.Riley Recruitment
Longview, TX • (42.6 miles) • Full Time • 11/15/2026
Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends. The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying grFresh & Ready Foods
Longview, TX 75605 • (44.6 miles) • Full Time • 11/14/2026
Position Title: QUALITY ASSURANCE SPECIALIST Location: Onsite in Longview, TX Salary: $60,000 - $80,000 Other Forms of Compensation: None Growth. Opportunity. Excellence. Fresh & Ready Food Group is a member of Canteen. Canteen sets the national standard for excellence in automated retail, and EVERY segment of our business is thriving. We employ the best team in the industry and their dedication, collaboration and passion fuel our growth . YOU bring enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. TOGETHER we’ll continue transforming the micro-market, dining, coffee, and vending industry. Come grow with us. We are Canteen. This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘Express Employment Professionals - Tyler
Tyler, TX 75701 • (24.7 miles) • Full Time • $19.00 to $30.00 / hr • 11/14/2026
Help keep a modern manufacturing operation running at its best. Based in Tyler, TX 75701, you will own the health of our production machinery-anticipating issues, fixing problems fast, and documenting what it takes to keep everything performing at peak. A day in the life You start with a walk-through of the plant, checking critical assets and tuning equipment for optimal output. When a machine signals a fault, you dig into the root cause-mechanical, electrical, or hydraulic-then implement a lasting fix. Between calls, you log your activities, coordinate with teammates on reliability improvements, and prep for upcoming equipment installations. Safety and order are woven into every step. Core responsibilities Execute preventive and routine service on plant machinery to sustain top performancEnpro
Longview, TX • (42.6 miles) • Full Time • 11/14/2026
Job Title: Product Technician I – Rubber Molding Job Code: 809003 – Prod Tech II Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician I – Rubber Molding role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborative andAlfred H Knight Group
Longview, TX • (42.6 miles) • Full Time • 11/13/2026
WHAT IS ON OFFER Alfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s. ABOUT US Alfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries. We have honed & carefully crafteLiberty Industries Investments LLC
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/13/2026
Description: Department: Powder Coating / Wash Bay Reports To: Production Management Position Type: Full-Time | Working Lead Position Summary We are seeking an experienced, hands-on Powder Coating & Wash Bay Lead to oversee daily operations within our powder coating and wash bay departments. This individual must have strong technical knowledge of powder coating processes along with the leadership skills necessary to direct employees, manage daily production demands, and maintain high standards of safety and quality. This is a working leadership position. The ideal candidate must be comfortable operating equipment, troubleshooting coating issues, training employees, and filling in wherever needed to keep production moving. The Powder Coating & Wash Bay Lead will work closely with productionApex Geotech Drilling
Kilgore, TX 75662 • (39.6 miles) • Full Time • $20.00 to $24.00 / hr • 11/13/2026
Are you the expert we’re looking for? Can you translate blueprints for geotechnical and drilling equipment into precise toolpaths? Do you thrive on complex setups-fixturing, tooling choices, and offsets-that make ±0.001" accuracy routine? Will you mentor teammates while keeping production moving and quality uncompromised? The work Program CNC machines via G-code and/or CAM Set up machines for complex parts, including fixtures, tooling, and offsets Cut steel, aluminum, and specialty alloys to tight tolerances Inspect parts to print and document results Troubleshoot issues and implement corrective actions Guide CNC Operators and Assistants to build capability Maintain accurate production and inspection records What you must bring High school diploma or GED 3+ years of CNC machining experiencEPIC INDUSTRIAL INC
Canton, TX 75103 • (25.4 miles) • Full Time • 11/12/2026
Electrical Project Engineer Position Summary We are seeking an experienced Electrical Engineer with a strong background in the design, execution, and management of power distribution projects involving PDC Buildings / E-Houses, control buildings, compressor station electrical packages, and industrial power systems. The ideal candidate will have a minimum of 8 years of relevant experience and be capable of managing projects from equipment specification through fabrication, testing, and commissioning. Responsibilities Lead electrical engineering activities for power distribution control buildings, switchgear lineups, and industrial electrical packages. Develop and review electrical one-line diagrams, schematics, wiring diagrams, control drawings, panel layouts, and equipment arrangements. SpConterra Ultra Broadband
Tyler, TX 75701 • (24.7 miles) • Full Time • 11/12/2026
Outside Plant Tech I Job Type: Full Time DUTIES AND RESPONSIBILITIES: • Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping. • Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards. • Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground • Help perform fiber tests with OTDR’s, visible light source and meters. • Assist in the installation of fiber optic communication equipment and Inside plant patch panels. • Install aerial and underground enclosures and other fiber related telecom equipmenAmerican Industrial Transport
Longview, TX 75604 • (38.8 miles) • Full Time • $26.44 to $29.81 / hr • 11/12/2026
Job Summary Entry-level Quality Inspector training for performing basic in-process and final inspections under supervision while developing knowledge of AAR, FRA, customer, and company requirements. Job Duties Inspection Activities Train to Perform assigned in-process inspections. Train to Perform assigned final inspections. Train to Verify work completed meets work order requirements. Train to Verify required repair procedures were followed. Train to Inspect repaired railcars for obvious defects and non-conformances. Train to Complete inspection documentation accurately and legibly. Train to Verify required forms are complete before railcar release. Quality Documentation Train to Complete inspection reports. Train to Record defects and discrepancies. Train to Maintain inspection records.Communications And Power Industries LLC
Kilgore, TX 75662 • (39.6 miles) • Full Time • 11/12/2026
The Radio Frequency (RF) Engineering Technician II supports engineering teams in the design, build, integration, test, and modification of satellite communications systems and associated electromechanical hardware . This role operates in a hands-on lab and production environment, working from schematics, drawings, and documented procedures to support prototype and production-level systems. This position is ideal for a technician with strong fundamentals across electrical, mechanical, and test disciplines who is ready to operate in a regulated Aerospace & Defense environment . YOUR DAY TO DAY INCLUDES: Support engineering activities including design support, test, checkout, modification, fabrication, and assembly of prototype and production electromechanical systems. Build, troubleshoot, teHeaton Eye Associates
Longview, TX • (42.6 miles) • Full Time • 11/12/2026
Job Summary: Provides individualized and specialized nursing care to patients in the ambulatory surgery center (ASC) in accordance with physician’s orders, recognized nursing standards, legal aspects of current nurse practice within the state, federal, and the ASC’s policies and procedures. Functions cooperatively with physicians and staff exhibiting teamwork characteristics. Demonstrate initiative, insight and judgment in decision-making process. About the Practice: The physicians of Heaton Eye Associates have been serving East Texas’ vision needs for over 40 years. We offer state-of-the-art technology with special services ranging from primary eye care to world-class laser surgery. Our physicians were the first to offer LASIK laser vision correction in East Texas and have performed tensLEGIT PRODUCTIONS LLC
Longview, TX 75601 • (44.9 miles) • Full Time • $1,200 to $6,000 / mo • 11/12/2026
Benefits: Opportunity for advancement Training & development LEGIT PRODUCTIONS LLCTexas Division - PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greaterApex GeoTech Solutions
Kilgore, TX 75662 • (39.6 miles) • Full Time • $55,000 to $85,000 / yr • 11/11/2026
Description: POSITION SUMMARY Great Opportunity! Supports quality operations by performing inspections, maintaining quality records, and assisting with non-conformance documentation and supplier quality activities. ESSENTIAL DUTIES & RESPONSIBILITIES Perform dimensional and visual inspections on incoming, in-process, and finished parts Record inspection results in quality records and ERP system Identify and tag non-conforming material and initiate NCR documentation Assist with first article inspections (FAI) and qualification testing Support internal and customer quality audits Maintain calibrated measuring equipment and calibration records Assist Quality Manager with data entry, reporting, and filing Requirements: REQUIRED QUALIFICATIONS High school diploma or GED 2+ years inspection or qSmith Construction Services
Brownsboro, TX 75756 • (24.9 miles) • Full Time • $15.00 to $25.00 / hr • 11/10/2026
SCS is looking for a Steel Fabricator versed in all forms of steel fab. Must be familiar in running CNC machines and the software involved. The candidate needs to be self motivated and be able to work unsupervised. This person will also need to be well versed in welding, reading blue prints, and shop drawings. Pay based on experience. We are a growing family based business looking for someone to come in and be part of the team. Company Description Smith Construction Services is a growing company looking to expand all aspects of the workforce. Company Description Smith Construction Services is a growing company looking to expand all aspects of the workforce.Tyler Pipe & Coupling
Tyler, TX • (24.7 miles) • Full Time • 11/8/2026
Company Description Location: Tyler, TX Pay: Pay Rate $30.71/hour Shift: 5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship. Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment toHOLT CAT
Kilgore, TX 75662 • (39.6 miles) • Full Time • $21.47 to $36.81 / hr • 11/7/2026
Description HOLT CAT in Kilgore, Texas is looking for a experienced Machinist for our heavy construction equipment shop. The Machinist performs all standard machining repairs on heavy equipment or components in a shop environment. Demonstrates a willingness to help in other areas when needed. Must be able to lay out tasks, reads and interprets blueprints and technical publications, designs and draws working sketches. Hours for this position are Monday through Friday 7am to 4pm. We are located at 3007 Maverick Drive, Kilgore, Texas 75662. Key Responsibilities Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Demonstrates well developed technical skills andE Tech Group
Longview, TX • (42.6 miles) • Full Time • 11/6/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an enthusiastic and experienced Automation Engineer to be responsible for leading or contributing to detailed hardware and software design of process automation controPlaymate Preschools LLC
Tyler, TX • (24.7 miles) • Full Time • $18.00 to $25.00 / hr • 11/4/2026
Role Overview Candidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards. Key Responsibilities The SMT operator will run and maintain the SMT equipment (paste printer, pick and place, reflow). Operator will also be expected to program jobs. Job Description: Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be able to operate and maintain equipment other than SMT equipment. This person must beSecond Generation Arc N Spark Welding
Tyler, TX 75706-6031 • (24.7 miles) • Full Time • $21.00 to $23.00 / hr • 11/3/2026
The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities. Attention!!! This position is REQUIRED to work 40+ weekends a year. There will be multiple positions hired from this posting. Minimum Qualifications: Must be able to complete all job positTyler Building Systems
Tyler, TX 75707 • (29.6 miles) • Full Time • 11/3/2026
Entry Level Designer / Draftsman Tyler Building Systems, Tyler, Texas (Headquartered in Tyler, TX – Manufacturing custom metal building systems since 1968) About Tyler Building Systems: Tyler Building Systems is a leading manufacturer of high-quality, custom-engineered metal building systems. From commercial warehouses and industrial facilities to churches, recreational spaces, retail buildings, and agricultural structures, we deliver durable, tailored solutions built with American-made steel right here in Texas. We're committed to providing exceptional value, personal service, and reliable expertise for every project. Position Overview: We are currently seeking motivated Entry-Level Designers/Draftsmen for full-time positions on our design and drafting team. This is an outstanding opportuKeepRite Refrigeration Texas
Kilgore, TX 75662 • (39.6 miles) • Full Time • 11/3/2026
Who are we? National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years. About the Role: We are seekHotRun Inc.
Longview, TX • (42.6 miles) • Full Time • $90,000 to $115,000 / yr • 11/2/2026
Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. This position will be responsible for the quality process including critical process characteristics, standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO 13485:2016. Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations. Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes. Ensure the application of advanced quSnelling Tyler
Tyler, TX 75706 • (15.9 miles) • Full Time • 11/2/2026
SNELLING is currently recruiting for a CNC Programmer a manufacturing company in the Tyler area with a pay rate of $25.00/hr – $36.00/hr. Schedule is Monday–Friday during standard day shift hours. We are seeking an independent proactive CNC Programmer to create, prove out, and optimize CNC programs using Mastercam and SolidWorks. This role also involves selecting tooling, generating first-article parts, and providing cost estimates for customer quotes. Key Responsibilities: Create CNC programs from engineering prints using Mastercam and SolidWorks. Generate and prove out first-article part machining to ensure quality and accuracy. Identify and recommend appropriate tooling for each job, utilizing existing inventory or suggesting new tooling. Provide cost estimates to support accurate custoTopp's Pizza
Tyler, TX 75707 • (29.6 miles) • Part Time • $10.00 to $13.00 / hr • 11/1/2026
Responsibilities: Accurately take orders over the phone and at the front counter. Efficiently operate the cash register and handle transactions. Read and fill orders correctly, ensuring customers satisfaction. Maintain cleanliness in the store at all times, adhering to health and safety standards. Contribute to a fast-paced environment by staying proactive and finding tasks to complete during slower periods.INTEGRITY SERVICES TX LLC
Gilmer, TX 75645-7877 • (31.5 miles) • Full Time • 10/31/2026
About Company: Integrity Services TX LLC is a trusted, Texas-based oilfield service company built on hard work, reliability, and doing the job right the first time. We provide a full range of field services to the upstream and midstream energy sectors across Texas and the surrounding core services include: General oilfield construction and support Roustabout crews and facility maintenance Right-of-way (ROW) clearing and reclamation Pipeline installation, maintenance, and integrity work Dirt construction – lease roads, location pads, reserve pits, containment ponds, and commercial site prep Excavation, grading, and heavy equipment operations Founded and still operated with a strong emphasis on safety, quality, and customer relationships, Integrity Services TX has earned a reputation for shoGalaxy Lifts LLC
Mabank, TX 75156-7112 • (41.8 miles) • Full Time • $55,000 to $65,000 / yr • 10/31/2026
GALAXY LIFTS – MANUFACTURING DRAFTER Galaxy Lifts is seeking a skilled and motivated individual to join as a Manufacturing Drafter. T his role balances tactical execution with an understanding of overall product and engineering strategy to create layouts and drawings for innovative, safe and high-performing equipment used to elevate quality of life and improve mobility for our customers. THE COMPANY YOU WILL BE JOINING: Branded manufacturer and marketer of powered cargo and passenger lifts #1 player in its market with exceptionally high growth potential Mission-driven: we elevate the quality of life for people needing assistance with vertical mobility Galaxy Lifts is a division of Canopy Brands , the best home for the world’s mightiest small companies. Together, our family of brands generaPizza Hut - Tall Timbers
Mineola, TX 75773 • (2.9 miles) • Full Time • 10/30/2026
Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut Cook, you can be the smiling face that cooks our food and serves the customers. You will learn how to cook from scratch. Working with us will give you financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. What are we looking for? The good news is that your training will teach you everything you need to know to succeed in the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you’re not goinSystem One
Pittsburg, TX 75686 • (38 miles) • Full Time • 10/30/2026
Title: Quality Assurance Lead Location: Pittsburgh, PA Team Dynamic: working within a larger team of data analysts, business analysts, developers, management team. Roles and Responsibilities: • Lead quality engineering and testing for data?driven regulatory reporting applications. • Validate data accuracy and completeness across source?to?target data flows and reports. • Design and execute test strategies covering functional, regression, and data reconciliation testing. • Partner with technology and business stakeholders to ensure regulatory requirements are met. • Oversee test execution, defect analysis, and root?cause identification. • Own testing documentation including scope, strategy, execution results, and delivery artifacts. Must Have Technical Skills: • 5–8 years of experience in dPneumatech Safety Systems, Inc.
Flint, TX 75762 • (29.7 miles) • Full Time • $18.00 to $20.00 / hr • 10/29/2026
Job Description Instrumentation and Controls Technician in the upstream and midstream oil & gas industry. This position will be responsible for safely and promptly performing tasks involved with day-to-day maintenance and support of pneumatic systems in order to minimize or resolve downtime. In addition, it requires preventive maintenance skills and the ability to construct pneumatic systems from start to finish. We are asking for the applicant to be local to the East Texas area. Roles & Responsibilities Support I&C Techs and learn all processes and procedures to become I&C Technician. Meet all Safety training requirements need to meet customers safety requirements Learn to maintain equipment and vehicles provided by Pneumatech and keep in good operational condition. Ensuring safety in theTHE BUTCHER SHOP
Longview, TX • (42.6 miles) • Full Time • $11.00 / hr • 10/29/2026
Join Our Team as a Back Bakery-Production Team Member Are you passionate about baking and looking for an opportunity to be part of a hardworking team? We're hiring for a Back Bakery-Production role, where you'll play a key part in creating high-quality baked goods and ensuring our bakery runs smoothly. If you have at least one year of experience and are eager to contribute to a dynamic environment, we encourage you to apply in person by filling out a paper application. Responsibilities As a Back Bakery-Production team member, you'll be responsible for preparing and producing baked goods to meet our high standards of quality and consistency. This role involves working behind the scenes to ensure our bakery is stocked with fresh products, managing production tasks efficiently, and maintaininTechniform Metal Curving
Mabank, TX 75147 • (37.6 miles) • Full Time • $25.00 / hr • 10/28/2026
Techniform is looking for an experienced 2nd Shift CNC Machine Operator to join our team. Techniform serves many industries from Aerospace to Architectural providing stretch forming, machining and fabrication. The ideal candidate would be responsible for programs, sets up and operates the CNC 3 Axis Machining Center by performing the following duties. Job Summary: · Sets up, operates and assists/edits programming of the CNC 3 Axis Machining Center to perform a combination of machining operations such as facing, turning, boring, threading, drilling, reaming, broaching, knurling metal work pieces to specifications.* · Sets up and operates CNC 3 Axis Machining Center to complete metal work pieces to specifications.* · Reviews set up sheets and specifications to determine program sequence, setONEMESA
Longview, TX 75605 • (44.6 miles) • Full Time • 10/28/2026
About the Role: BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients. In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services. BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developingRevolution Sustainable Solutions Holding
Kilgore, TX 75662 • (39.6 miles) • Full Time • 10/25/2026
Revolution is now hiring a experienced Printing Press Operator in Kilgore, TX. This is a 12-hour night shift schedule. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company. Work responsibly in a safe manner, following all safe operating procedures and posted requirements. Follow work guidelines and adhere to all company policies. Sustain productivity and quality standards. Handle products according to customer specifications and the company's production standards. Stage printed rolls in conversion Load/Unload ink chambers and trays from the machine. Set/Adjust impression, registration, and web guide. Responsible for all machine adjustments and job set-ups. Handle and store wastewater and all inks properly. Observe rolls for splices aIndevco North America Inc
Longview, TX 75604 • (38.8 miles) • Full Time • 10/25/2026
Description: The Quality Manager provides technical and quality leadership across the production process. This role oversees the Quality System, analyzes production and supplier sample data, communicates findings to appropriate personnel, and ensures compliance with applicable requirements. The Quality Manager also participates in daily and monthly quality and safety audits of equipment and personnel. Key Responsibilities Quality Leadership and Operations · Approach all work, decisions, and communication with a focus on improving quality and eliminating waste. · Stop any operation that is not producing products that meet customer expectations or that violates approved quality or safety standards. · Collaborate effectively with other divisions within INDEVCO Group to drive improvements. · CPeltier Chevrolet
Tyler, TX • (24.7 miles) • Full Time • 11/18/2026
Possible Available Positions : Quick Lube Technician Entry-Level Service Technician Experienced Service Technician Heavy Line Technician Transmission Technician Master Service Technician Technician Specific Benefits Shop equipped with the newest technology Uniforms provided Discounts on products and services Highly productive shop Career advancement opportunities, promote from within ASE and state inspection certification reimbursement and all training expenses paid to further your career Continued education, manufacturer hands on and web-based training Clean and professional work environment Competitive wages Additional Benefits We Offer Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Vacation Paid Holidays Paid Maternity Leave Paid Paternity Leave Paid BereavementPeltier KIA Tyler
Tyler, TX • (24.7 miles) • Full Time • 11/16/2026
We are looking for a Service Technician to join our growing team! The right candidate will have a strong service technician background and ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. Benefits: Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Vacation Paid Holidays Paid Maternity Leave Paid Paternity Leave Paid Bereavement Paid Training Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, airSouthern Tire Mart At Pilot LLC
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/6/2026
Key Responsibilities: Respond to roadside and on-site service calls using a fully equipped service truck. Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. Diagnose and repair tire-related issues and perform light mechanical repairs as needed. Inspect tires and wheels for wear, damage, and proper inflation. Perform fleet inspections and preventative maintenance checks when required. Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. Maintain the service truck, tools, and equipment in safe operating condition. Follow DOT regulations, company safety policies, and traffic laws at all times. Provide exceptional customer service, including clear communication of service details and timelines. AssHTX Material Handling
Flint, TX 75762 • (29.7 miles) • Full Time • 11/3/2026
PM Service Technician HTX Material Handling – Tyler, TX Are you ready to grow your career in a thriving industry? HTX Material Handling is seeking a skilled Planned Maintenance (PM) Service Technician to join our expanding team in Tyler, Texas. We are a leading material handling equipment distributor representing premium global brands such as Linde and Baoli. Since opening our doors in 2019, we’ve been committed to delivering exceptional service to customers across Texas. This is the perfect opportunity to join a fast-growing company with excellent pay, benefits, and training opportunities to help you advance your skills and career. Position Overview As a PM Service Technician, you will be responsible for performing planned maintenance, diagnosing issues, and repairing forklifts and materiAddison Group
Longview, TX • (42.6 miles) • Full Time • 11/14/2026
Role: Production Manager Location: Longview, TX Salary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k. Summary: This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals. The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains. In addition, the role supports financial planningHarrison, Walker And Harper
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/12/2026
Now Hiring: Cabinet & Hardware Assemblers (Bilingual Preferred) Estamos Contratando! Ensambladores de Gabinetes y Hardware (Se Prefiere Bilinge) Are you experienced in construction or assembly? Can you work with your hands, follow blueprints, and use power tools confidently? Rodgers Wade is looking for Cabinet/Hardware Assemblers to join our team in Paris, Texas ! Tienes experiencia en construccin o montaje? Sabes usar herramientas y trabajar bien en equipo? Rodgers Wade quiere que formes parte de nuestro equipo como Ensamblador de Gabinetes/Hardware! Location / Ubicacin: Paris, TX Pay Rate / Salario Inicial: $15–$17 per hour (based on experience) Schedule / Horario: Monday–Friday | 5:00 AM – 1:30 PM Some Saturdays & Overtime as needed / Algunos sbados y horas extras, segn sea necesario WhHiFyve
Winnsboro, TX • (24 miles) • Full Time • $130,000 to $170,000 / yr • 11/9/2026
HiFyve is hiring a Plant Manager in Winnsboro, TX! Salary: $130,000 - $170,000 annually, depending on experience Shift: Days Location: Winnsboro, TX Benefits: Full benefits package Job Description HiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost. Job Responsibilities Lead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safety Drive plant KPIs related to safety, quality, productivity, service, and cost Manage plant budgets, expenses, P&L performance, and capital projects Identify and implement continuous impCascade Manufacturing Company
Tyler, TX 75708 • (22.5 miles) • Full Time • 11/7/2026
Join us at Cascade Manufacturing Company as a full-time, 1st Shift TRUSS ASSEMBLER at our manufacturing plant in Tyler, TX, and take your career to new heights! With competitive pay starting at $19.00 per hour, this on-site position offers the chance to learn or enhance your construction skills. You can enjoy great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Flexible Spending Accounts, and Paid Time Off. Who we are: Cascade Mfg Co, established in 1953, is a leading manufacturer of wood and cold-formed steel trusses serving various markets in the Midwest, South, Southeastern US, and beyond. With manufacturing facilities strategically located in Cascade, IA, Tyler, TX, and East Dublin GA for steel trusses, and Cascade, IA and Pleasantville, IA for wood trusses, we ensurCable's Roofing
Tyler, TX 75703 • (29.6 miles) • Full Time • 10/23/2026
Production Manager Cable’s Roofing is always interested in connecting with experienced professionals who may be a strong fit for our team. While we are not actively filling this position at this time, we are keeping our options open for an experienced Production Manager for our Tyler, Texas office. This role is responsible for overseeing the day-to-day production of roofing projects from scheduling through completion. The Production Manager works closely with Project Managers, crews, suppliers, sales, and office staff to make sure jobs are properly prepared, completed efficiently, and closed out accurately. The right person will be organized, proactive, accountable, and comfortable managing both people and moving parts. Strong communication and follow-through are extremely important in thiPrimo Brands
Hawkins, TX 75765 • (14.1 miles) • Full Time • 11/11/2026
Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Hawkins, TX Compensation: $34.54 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 6:00p - 6:30a rotating 2-2-3 12 hour Day or Night Shifts based on availability and business needs Ability to work holidays and weekends per business needs Responsibilities Restoring machine to operating conditions during machine runtime failure in a team setting Complete reactive maintenance on production lines to recover from equipment failEagle Metal Products LLC
Mabank, TX 75147 • (37.6 miles) • Full Time • 11/17/2026
Description: Eagle Metal manufactures structural connector plates, as well as provides truss and panel design software to our customers nationwide! We are a group of professionals who share two core values: A warrior’s spirit to work hard, innovate and persevere; a servant’s heart to treat others with respect and always give that something extra in helping every customer succeed. With our continued growth, we are looking for someone to join our production team in Mabank, Texas. Requirements: The candidate should be reliable and able to work in an environment that requires being on your feet and some lifting. Must be a dependable part of the team, as teamwork is vital to our continued growth and success! Position Responsibilities: · Operate, or assist with, a stamping press and related equiDUOLINE TECHNOLOGIES, INC.
Gilmer, TX • (31.5 miles) • Full Time • $19.00 / hr • 11/11/2026
**Job Title:** Production Operator **Location:** Gilmer, TX **Company:** Duoline Technologies **Job Type:** Full-Time **About Us:** Duoline Technologies, a Maxtube Group company since 2017, developed the DUOLINE lining process as a means to solve own downhole steel tubular corrosion problems. We have installed more than 100 million feet of DUOLINE tubing worldwide. **Job Summary:** We are seeking a dedicated and detail-oriented Production Operator to join our manufacturing team. The ideal candidate will be responsible for operating production equipment, monitoring processes, and ensuring that products meet quality standards. This role requires a commitment to safety and efficiency in a fast-paced environment. **Key Responsibilities:** - Operate and monitor production machinery and equipmenAcero Building Components LLC
Terrell, TX 75161 • (40.8 miles) • Full Time • $17.43 to $18.40 / hr • 11/10/2026
This is a full-time position with the schedule of Monday through Friday from 7 a.m. to 4 p.m. Occasional overtime. Job Summary: The Machine Operator will be responsible of the equipment and ensure proper set up, start up, shut-down procedures and safe operation. The operator will play a key role in improving safety, quality, productivity, and cost on existing manufacturing processes. Essential Responsibilities Engage in safe work behaviors and adhere to all organization's safety standards and regulations. Responsible for equipment start-up, set-up, shut-down, malfunction detection, and inspection to resolve or escalate. Feeds product into the hopper or other feeding device(s) into designated equipment Basic knowledge of the use of PLC's programming. Responsible for the support of automatioBethesda Health Clinic
Tyler, TX 75701 • (24.7 miles) • Full Time • 11/18/2026
Hangers of Hope Thrift Stores SUMMARY To process donations from donors to retail. This includes, but not limited to, accepting, sorting and pricing donated items. This includes but is not limited to compliance with company policies and standards, procedures, and the Hangers of Hope Mission Statement. ESSENTIAL FUNCTIONS OF THE JOB 1. Is able to daily perform any of the required job duties within the production team. This includes all requirements related to accepting donations, presorting and pricing merchandise. 2. As needed, welcome donors in a timely manner in a way that they feel confident that Bethesda appreciates them and understands their value. 3. As needed, handle the receiving and donation process with the utmost respect and care including, greeting the donor, assisting in unloadAtlas Pressure Control
Tyler, TX • (24.7 miles) • Full Time • 11/18/2026
Atlas Pressure Control provides oilfield pressure-control equipment and services, with a focus on wellhead and drilling and production solutions. This role supports the work that keeps critical equipment ready for use by helping ensure products are assembled, tested, maintained, and prepared to meet operational requirements. As an Assembly Technician, you will play an important part in the preparation and upkeep of wellhead and frac rental equipment. This is a hands-on role for someone who takes pride in quality workmanship, values safe work practices, and is comfortable contributing to day-to-day shop operations that support the broader business. Responsibilities Assemble, test and paint wellhead and frac rental equipment. Practice safe work habits and comply with quality, safety, healthBishop Lifting Products Inc
Kilgore, TX 75662 • (39.6 miles) • Full Time • $18.00 to $20.00 / hr • 11/18/2026
Our Mission : Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Testing of new and existing product to ensure that rate of capacity can be achieved without causing damage, deformation or permanent distortion to different products. Key Duties and Responsibilities: Conduct load testing on any products as required such as wire ropes, synthetic slings, etc. Input of necessary product information for creation of test certifications; Perform other functions as required. Job Requirements: MustExpress Employment Professionals - Tyler
Tyler, TX 75703 • (29.6 miles) • Full Time • $20.00 to $40.00 / hr • 11/14/2026
Shape the flow of power across East Texas At Express Employment Professionals, we’re placing skilled electricians on industrial and commercial jobsites throughout the Tyler, TX area. Some of our teammates roll out before dawn to mobilize for large industrial builds; others badge into a local plant to keep production humming. Whichever path you choose, your craft keeps facilities energized and safe. Open seats today in and around Tyler, TX: 2 Licensed Journeyman Electricians 1 Electrical Wireman Travel Electricians for industrial construction projects Local Industrial Electrical Techs for plant maintenance and repair Want details fast? Text "Electrician" to . A day in the life Morning toolbox talk. PPE on. You review one-lines and schematics, then get to work installing and terminating feedLiberty Industries Investments LLC
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/13/2026
Description: Welcome to Liberty Trailers, where we're passionate about building quality trailers that stand the test of time! As a leading manufacturer in the industry, we're dedicated to providing our customers with innovative solutions and unparalleled craftsmanship. At Liberty Trailers, we take pride in our work and are committed to creating a collaborative and inclusive workplace for our employees. As a member of our team, you'll have the opportunity to work with a talented group of professionals who share your passion for excellence and take pride in the work they do. Join us and be part of a company that is transforming the trailer industry through innovation, quality, and exceptional service. Powder Coating Technician Position Summary: We are looking for great people to join our teaCommunications And Power Industries LLC
Kilgore, TX 75662 • (39.6 miles) • Full Time • 11/11/2026
We are seeking a driven, execution-focused New Product Introduction (NPI) Manufacturing Engineer to help bridge product design and manufacturability early in the development lifecycle. This role supports accelerated time-to-market, reduces cost variance, and ensures a smooth transition from concept and prototype builds into full-scale production. The NPI Engineer operates at the intersection of design engineering and manufacturing, supporting product industrialization efforts. This role helps translate design intent into scalable manufacturing processes, identifies risks, contributes to cost alignment, and supports production readiness. The ideal candidate brings 3D CAD/solid modeling capability, supports rapid prototyping through 3D printing, and assists in developing 3D fixtures to enablVolkert Inc
Tyler, TX 75702 • (21.7 miles) • Full Time • 11/6/2026
Are we the road to your future? We are currently searching for a Junior level and Senior level CAD Technician to support our Southwest Region located in Austin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX . The ideal candidate will be responsible for coordination and oversight of geometric design projects. What you’ll be doing: Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projects Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects Work with engineers to develop 3D models using both OpenRoads Designer Research appEnpro
Longview, TX • (42.6 miles) • Full Time • 11/4/2026
The Product Technician I – Hubodometers is responsible for supporting day-to-day production operations within the assembly area. This role is a key contributor to a high-performing team and is expected to assemble components, follow standard work, and ensure product quality through accurate inspection and defect detection. This position requires strong attention to detail, the ability to consistently follow standardized processes, and a commitment to safe work practices, quality execution, and continuous improvement. What You’ll Do: Perform manual and/or semi-automated assembly operations in accordance with established standard work and safety procedures Assemble components and sub-assemblies using tools, fixtures, and work instructions to meet product specifications Inspect finished and iSnelling Tyler
Tyler, TX 75706 • (15.9 miles) • Full Time • 11/2/2026
SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications. Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance. Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments. Stop machines to remove fHOLT CAT
Kilgore, TX • (39.8 miles) • Full Time • $18.11 to $30.07 / hr • 10/31/2026
Description This position is responsible for refurbishing frac trailers and related components to include engines, pumps, transmissions, etc. Mid-level position – Generally has more than three years of experience, but less than six years, and/or demonstrated job relevant knowledge/skills. A Level III Technician is familiar with a variety of the field’s standard and technical concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Level III Technician performs a variety of standard and technical tasks, works under general supervision, and is often a team member on a large project. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business valuGalaxy Lifts LLC
Mabank, TX 75156 • (43.9 miles) • Full Time • $70,000 to $85,000 / yr • 10/31/2026
ENGINEER Galaxy Lifts is seeking a skilled and motivated individual to join as an Engineer. This role balances tactical execution with an understanding of overall product and engineering strategy to create layouts and drawings for innovative, safe and high-performing equipment used to elevate quality of life and improve mobility for our customers. THE COMPANY YOU WILL BE JOINING: Branded manufacturer and marketer of powered cargo and passenger lifts #1 player in its market with exceptionally high growth potential Mission-driven: we elevate the quality of life for people needing assistance with vertical mobility Galaxy Lifts is a division of Canopy Brands , the best home for the world’s mightiest small companies. Together, our family of brands generates more than $200 million in revenue andTechniform Metal Curving
Mabank, TX 75147 • (37.6 miles) • Full Time • $16.00 / hr • 10/28/2026
Techniform is looking for a Fabrication Associate to join our team. Techniform serves many industries from Aerospace to Architectural providing stretch forming, machining, fabrication, and assembly of metals. The ideal candidate would be responsible for fabricating and assembling stretch formed metal products such as aircraft, structural, commercial, military, and transportation and other metal parts by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following but are not limited to. Other duties may be assigned: 1. Locates and marks bending and cutting lines onto workpiece. 2. Sets up and operates fabricating machines such as presses, rolls and drill presses. 3. Hammers, chips, and grinds workpiece to cut, bend and straighten metal. 4. Positions, aligns,Tyler Building Systems
Tyler, TX 75707 • (29.6 miles) • Full Time • 11/4/2026
Position Summary The Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components. Key Responsibilities Perform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems. Help troubleshoot, diagnose, and rRevolution Sustainable Solutions Holding
Kilgore, TX 75662 • (39.6 miles) • Full Time • 11/5/2026
Revolution is hiring for a night shift (7:00 pm - 7:00 am) Extrusion Operator in Kilgore, Texas. This role will be responsible for processing materials and manufacturing products in an industrial organization. Here’s your chance to make a direct impact in a key role in producing the top-quality film safely and effectively. Ability to make quality checks on time. Ensure correct count and label. Make and handle the product. Be aware of production requirements. Understand the order sheet specifications. Communicate and coordinate daily issues with your relief. Troubleshoot machine issues. Be familiar with resin conveying systems and blenders. Help to coordinate training. Make continuous efforts to improve the quality of the product. Must understand the basic knowledge of extrusion. QualificatIndevco North America Inc
Longview, TX 75604 • (38.8 miles) • Full Time • 10/28/2026
Description: INDEVCO North America (INA) is seeking a skilled and experienced Machine Operator specialized in Blown Film production to join our manufacturing team. The ideal candidate will be responsible for the efficient operation of extrusion machinery, ensuring the production of high-quality blown film products. The Machine Operator will play a crucial role in maintaining optimal machine performance, troubleshooting issues, and adhering to safety and quality standards. Key Responsibilities: Operate and monitor blown film extrusion machinery to produce quality film products according to production specifications. Set up, adjust, and control machine settings, such as temperatures, speeds, and thickness, to achieve desired product characteristics. Conduct routine equipment checks and preveBethesda Health Clinic
Tyler, TX 75701 • (24.7 miles) • Full Time • 11/18/2026
Hangers of Hope Thrift Stores SUMMARY To process donations from donors to retail. This includes, but not limited to, accepting, sorting and pricing donated items. This includes but is not limited to compliance with company policies and standards, procedures, and the Hangers of Hope Mission Statement. ESSENTIAL FUNCTIONS OF THE JOB 1. Is able to daily perform any of the required job duties within the production team. This includes all requirements related to accepting donations, presorting and pricing merchandise. 2. As needed, welcome donors in a timely manner in a way that they feel confident that Bethesda appreciates them and understands their value. 3. As needed, handle the receiving and donation process with the utmost respect and care including, greeting the donor, assisting in unloadTyler Pipe & Coupling
Tyler, TX • (24.7 miles) • Full Time • 11/8/2026
Company Description Tyler Pipe is hiring Foundry Production Workers to perform various job duties based on their assigned production area. These duties include operating, monitoring, controlling, maintaining, cleaning machinery used in the process of producing cast iron pipe and fittings. Most common job assignments for new hires are Core Machine Operator, Casting Processor, or Pipe Processor. Job Description Foundry Production Worker (Actual job will be assigned at New Hire Orientation and is based on the production needs at that time.) Location: Tyler, TX Pay: Pay Rage $22.44 - $27.20/hour Shift: Most openings are 2nd Shift What You’ll Do: Complete the job duties related to their assigned work area such as: Operator machinery to make fitting cores. Grind fittings to remove excess iron anExpress Employment Professionals - Tyler
Overton, TX 75684 • (41.1 miles) • Full Time • $20.00 to $28.00 / hr • 11/14/2026
Shape precision. Power production. Step into a role where your craftsmanship drives quality. As a CNC Precision Machining Technician, you’ll convert drawings and CAD models into accurate parts, keep machines running at peak performance, and uphold rigorous quality standards. A day in your work boots You arrive, pull up the day’s blueprints, and map out your setups. You select tooling, load programs, and dial in offsets. As parts run, you monitor feeds and speeds, listening and watching for anything that needs adjustment. You verify dimensions with micrometers and calipers, troubleshoot small issues before they become big ones, and partner with engineers and teammates to make the next run even better. You wrap by cleaning your station and locking in a safe, organized workspace for tomorrow’HOLT CAT
Longview, TX • (42.6 miles) • Full Time • $16.80 to $27.00 / hr • 11/7/2026
Description The Undercarriage Shop Technician 1 , performs basic to moderate diagnosis and repairs on heavy construction equipment undercarriage in a shop environment. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions Personally models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Statement. Performs basic repairs on equipment undercarriage and undercarriage components. Operates undercarriage build-up and rebuild machines,Liberty Industries Investments LLC
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/6/2026
Description: Job DetailsJob TypeFull-timeFillmore, INDescriptionPRODUCTION WELDER (MIG)Location: Fillmore, IN (On-Site) Position Type: Full-Time Reports To: Production SupervisorAbout Liberty TrailersAt Liberty Trailers, we build more than trailers - we build trust, American craftsmanship, and freedom on wheels. As a leading manufacturer of high-quality light and medium-duty trailers, we take pride in durability, innovation, and integrity. Join a growing team that values hard work, safety, andOverviewThe Production Welder (MIG) is responsible for assembling and welding trailer components with precision and consistency. This hands-on role is ideal for a skilled welder who thrives in a fast-paced manufacturing environment and is committed to safety, quality workmanship, and ResponsibilitiesPEnpro
Longview, TX • (42.6 miles) • Full Time • 10/31/2026
The Materials Engineer works in conjunction with the Engineering Manager or Sr. level Engineer. The Materials Engineer is responsible for maintaining existing material designs and may work on the development, validation, release and launch of new materials, working in a cross-functional team environment. Responsibilities also include: continuous improvement of current production products/processes, assistance with manufacturing process improvement, customer concerns, warranty analysis, and supplier development. Main material focus is with rubber compounds and process chemicals for metal preparation for rubber bonding. What You’ll Do: Promote the STEMCO / Enpro Culture by exhibiting the five principles of exemplary leadership: Modeling the Way, Inspiring a Shared Vision, Enabling Others toBethesda Health Clinic
Tyler, TX 75701 • (24.7 miles) • Full Time • $12.00 / hr • 10/27/2026
Hangers of Hope Thrift Stores SUMMARY To process donations from donors to retail. This includes, but not limited to, accepting, sorting and pricing donated items. This includes but is not limited to compliance with company policies and standards, procedures, and the Hangers of Hope Mission Statement. ESSENTIAL FUNCTIONS OF THE JOB 1. Is able to daily perform any of the required job duties within the production team. This includes all requirements related to accepting donations, presorting and pricing merchandise. 2. As needed, welcome donors in a timely manner in a way that they feel confident that Bethesda appreciates them and understands their value. 3. As needed, handle the receiving and donation process with the utmost respect and care including, greeting the donor, assisting in unloadSnelling Tyler
Tyler, TX 75701 • (24.7 miles) • Full Time • 11/18/2026
SNELLING is currently seeking an Assembly Technician for a client in the Tyler area. The primary function of this position is to perform installation and assembly during the manufacture of custom equipment. The pay will be $16 – 17 / HR or more based on skills and experience. The schedule is Monday – Friday 6:00 AM – 2:00 PM. This position will be a temp-to-hire, meaning that SNELLING would work with you through the consideration and interview process and be your employer for a probationary period upon an offer being accepted. Responsibilities of the Assembly Technician position include: Reads and works from blueprints and other schematic drawings. Installs, fabricates, and assembles wiring and machine controls. When needed, reads, and understands quality control manuals and testing specifCommunications And Power Industries LLC
Kilgore, TX 75662 • (39.6 miles) • Full Time • 11/18/2026
YOUR DAY TO DAY : To learn and perform basic, routine electronic, mechanical, or composite assembly tasks following specific quality specifications and procedural documentation and follow instructions given under direct supervision. Machine & Equipment used : Cutters, skill saws, long nose and grip ring pliers, wire strippers, nut drivers, rivet guns, open and box end wrenches, luggers, screwdrivers, component bending tools, torches, vacuum equipment, RF induction heating equipment, cold test equipment, measuring calipers, voltmeters, electronic multimeter, heat guns, glue guns, tie wrap guns, crimpers, crimping machines, etc. YOU WILL BE ACCOUNTABLE FOR : Performs highly specialized and very complex manufacturing or production project tasks/assignments of an advanced nature ranging from rEnpro
Longview, TX • (42.6 miles) • Full Time • 10/28/2026
Job Title: Product Technician II – Rubber Molding Job Code: 809003 – Prod Tech II Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician II – Rubber Molding role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborative aHOLT CAT
Longview, TX • (42.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/14/2026
Description This Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and sLiberty Industries Investments LLC
Sulphur Springs, TX 75482 • (37 miles) • Full Time • 11/18/2026
Description: Position Summary We are seeking a dependable and safety-focused Manufacturing Associate to join our trailer manufacturing team. This position is responsible for hanging and securing goosenecks, dump trailers, and car haulers onto an overhead assembly line system and operating an overhead crane to properly position units for processing through a shot blast machine. This role requires attention to detail, safe equipment operation, and the ability to work in a fast-paced industrial environment. Key Responsibilities Hang goosenecks, dump trailers, and car haulers onto the overhead assembly line system Operate an overhead crane to lift, maneuver, and position trailers safely Ensure trailers are properly secured, balanced, and aligned before entering the shot blast machine Monitor uBethesda Health Clinic
Tyler, TX 75703-1728 • (24.7 miles) • Full Time • $12.00 / hr • 10/27/2026
Hangers of Hope Thrift Stores SUMMARY To process donations from donors to retail. This includes, but not limited to, accepting, sorting and pricing donated items. This includes but is not limited to compliance with company policies and standards, procedures, and the Hangers of Hope Mission Statement. ESSENTIAL FUNCTIONS OF THE JOB 1. Is able to daily perform any of the required job duties within the production team. This includes all requirements related to accepting donations, presorting and pricing merchandise. 2. As needed, welcome donors in a timely manner in a way that they feel confident that Bethesda appreciates them and understands their value. 3. As needed, handle the receiving and donation process with the utmost respect and care including, greeting the donor, assisting in unloadEnpro
Longview, TX • (42.6 miles) • Full Time • 10/27/2026
The Product Technician I – Hubcap Assembly is responsible for supporting day-to-day production operations within the assembly area. This role is a key contributor to a high-performing team and is expected to assemble components, follow standard work, and ensure product quality through accurate inspection and defect detection. This position requires strong attention to detail, the ability to consistently follow standardized processes, and a commitment to safe work practices, quality execution, and continuous improvement. What You’ll Do: Perform manual and/or semi-automated assembly operations in accordance with established standard work and safety procedures Assemble components and sub-assemblies using tools, fixtures, and work instructions to meet product specifications Inspect finished anHOLT CAT
Longview, TX • (42.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/14/2026
Description This Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. The hours for this position are Monday through Friday 7:00 AM to 5:00 PM. Must be willing to work extra hours as needed! Our address is 2210 Legacy Parkway, Longview, TX 75602. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procEnpro
Longview, TX • (42.6 miles) • Full Time • 10/29/2026
Join STEMCO as an Automation Technician and help drive manufacturing excellence through the maintenance, troubleshooting, and continuous improvement of advanced automation systems and production equipment. In this role, you will play a critical part in supporting the reliability and performance of manufacturing operations by maintaining automated assembly equipment, PLC-controlled systems, and plant production equipment. You will work alongside operations and maintenance teams to minimize downtime, improve equipment performance, and support a safe and efficient manufacturing environment. What You’ll Do: • Perform preventive, predictive, and corrective maintenance on automated assembly equipment and production machinery. • Troubleshoot and repair PLC-controlled systems, electrical controls,HOLT CAT
Longview, TX • (42.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/2/2026
Description This mechanic position is responsible for performing inspections, diagnoses, and repairs of diesel-powered heavy equipment and/or related equipment or components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. The incumbent in this posHOLT CAT
Longview, TX • (42.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/1/2026
Description This Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and sEnpro
Longview, TX • (42.6 miles) • Full Time • 11/14/2026
Job Title: Product Technician I – Rubber Molding Job Code: 809001 – Prod Tech I Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician I – Rubber Molding role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborative andHOLT CAT
Longview, TX • (42.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/1/2026
Description This Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and sEnpro
Longview, TX • (42.6 miles) • Full Time • 11/11/2026
The Forklift Driver is responsible for the safe and efficient movement of materials throughout the manufacturing facility. This role requires advanced forklift operating skills, a strong attention to detail, and the ability to accurately complete ERP system transactions to ensure proper tracking and accountability of all materials. Accuracy is critical in this role. The Forklift Driver is responsible for ensuring that all product movements-whether receiving, relocating, or shipping-are properly recorded in the system to maintain inventory integrity and traceability. What You’ll Do: Safely operate forklifts and other material handling equipment to transport raw materials, finished goods, and work-in-progress throughout the facility Accurately perform ERP transactions (e.g., receipts, transfEnpro
Longview, TX • (42.6 miles) • Full Time • 11/18/2026
Job Title: Product Technician II – Voyager Assembly Job Code: 809003 – Prod Tech II Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician II – Voyager Assembly role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborati