Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

JOB DESCRIPTIONPersons employed as a GSE Mechanic is expected to:Inspect and maintain ground support equipment used in operations.Troubleshoot, repair and/or overhaul ground support equipment.Check and service ground support equipment with fuel, water, oil and hydraulic fluid.Diagnose problems using test equipment and applicable manuals.Build and assemble machines or mechanical components according to requirements.Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues.Conduct repairs aiming for maximum reliability.Perform thorough maintenance on machinery, equipment and systems.Clean and apply lubricants to machinery components.Replenish fluids and components of engines and machinery.Provide consultation on correct maintenance and preventative measures to machine or vehicle users.Keep logs of work and report on issuesCompletion of GSE paperwork as required.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert).RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Ability to read and comprehend instructions, short correspondence and memos.Write routine business correspondence.Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees.Deal with problems involving several concrete variables in standardized situations.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Excellent knowledge of machinery and hydraulic, electrical and other systems and their componentsAptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers)Ability to follow established procedures and practices and read instruction, blueprints etc.A strong commitment to all health and safety guidelinesVery good communication skillsA problem-solving abilityVery good physical strength and staminaQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experienceMinimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior GSE or heavy equipment experience preferred.Must have your own tools.Must possess valid driver’s license.Certification from a vocational school or completion of apprenticeship is a definite plus.Valid certification (ASE) preferred.Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status.

Overview: MARKET LEADING PAY PLUS BONUS! WE LEAD THE MARKET IN PAY! CERTIFIED TECHS EARN MORE!MERCEDES BENZ OF BOERNE is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians/Mechanics, from entry level to experienced, to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees.We offer:Market Leading Pay that could be up to $5.00 per hour more than your current rate (based on a recent pay stub, your technical qualifications, OEM or ASE certifications, experience and work history), plus bonuses.A Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturerand Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards Program You needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* IND1

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance.Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraftOperate and maintain UPS equipment safelyRun, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do soDetermines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation RegulationCompletes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and completeServices and inspects aircraft, components, and related equipmentEnsure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover logFollow all Maintenance Department policies and proceduresKeep a clean and orderly work environmentMake recommendations to improve functions within the Maintenance DepartmentAttend UPS assigned trainingPerform other duties as assigned by Line Maintenance Supervisor or the Director of MaintenanceRequired QualificationsMust have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver’s license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts CataloguesFederal Aviation Administration required Drug Testing Information (FAA):As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107).Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs.Starting Pay:$30.13Benefits: Competitive weekly payMedical, dental, and vision after waiting periodDefined-benefit pension plan401(k)Paid vacationPaid holidaysPaid Sick and Family and Medical Leave time as required by lawDiscounted Employee Stock Purchase Program Employee Assistance Program*This job post is for SAT gateway only*Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Overview: MARKET LEADING PAY PLUS BONUS!AIR CONDITIONED SHOP!KIA OF SOUTH AUSTIN is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians/Mechanics, from entry level to experienced, to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees.We offer:A Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturerand Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards Program You needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* IND1

Overview: MARKET LEADING PAY AND BONUS!MAXWELL FORD SUPERCENTER is part of the fast growing Group 1 Automotive, a leader in automotive retail and service.We are growing and looking for Quality Automotive Service Technicians/Mechanics, from entry level to experienced, to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees.We offer:Market Leading Pay that could be up to $5.00 per hour more than your current rate (based on a recent pay stub, your technical qualifications, OEM or ASE certifications, experience and work history), plus bonuses.A Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturerand Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards Program You needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and The United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* IND1

We are looking for Part-Time Night Trash Collectors to join us! Having your own truck is required.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training.  No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-4 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors **EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are looking for Part-Time Night Trash Collectors to join us!  Having your own truck is preferred but not required.
Pay is up to $17/hr with your own pick up truck and up to $14/hr if you do not have your own vehicle.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training.  No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-4 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors **EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.