SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Overview: GovCIO is currently hiring for a Local Systems Engineer to provide support for the BluSCI network. This position will be located in San Antonio, TX and will be an onsite only position. Responsibilities: Gathers information concerning the capabilities and investigates the technical capabilities of local products and competing equipment and/or solutions; stays abreast of developments in hardware and software. Generates quantifiable requirements based on customer description, system planning and design, and ensures requirements comply through formal verification methods. Translates high level product development strategies into network and system requirement specifications and works with other engineering disciplines to develop lower level detailed implementation requirements. Establishes and coordinates development of standards, practices, and procedures as related to the overall network and system development. Customer liaison and support for development activities and to understand and shape requirements.Perform and provide technical solutions, guidance, and expertise for a variety of software and hardware taskings, including installation, removal, maintenance, configuration management, and restoration for all systems-based Enterprise Core Services Review and assess designs and proposed solutions for possible integration with existing or planned technologies focused on automation, enhanced effectiveness, and efficiency of capabilities Write technical reports and Standard Operating Procedures Provide support to all units, to include future expansion, increase in growth, and ensure the systems management environment functions effectively is executed and the deployment of all software used on the JBSA-Lackland network to include baseline images Develop all hardware and software technical solutions, implementation plans for acquisition requirements via the requirement tracking system used by the Government Review and develop IT technical solutions and implementation plans that cover deployment of a wide range of systems devices such as servers, software, network infrastructure, and operating systems Ensure all assigned requirements are tracked in Government approved Software systemsEvaluate vendor updates and patches as they come available and design installation methods using scripting (i.e. vbscript, powershell)Analyze vendor released and DoD software patches to ensure full compatibility with operational systemsAnalyze existing and emerging technologies to ensure the network stays on the leading edge of developmentDevelop project drawings using Visio drawing software as required by the projectBe responsible for updating software, validating licenses, and proper labelling and update of electronic software libraries and physical software media in accordance with current Government guidanceCoordinates the planning, design, and installation of equipment, using knowledge of engineering and programming as well as sophisticated instruments and computersInstalls all new hardware, systems, and software for networks Qualifications: High School with 3 - 6 years (or commensurate experience)Clearance Required: TS/SCIRequired Skills and ExperienceMust have current CompTIA Security+ Certification Excellent written/verbal communications skillsProven ability to coordinate with stakeholders and collaborate with other team membersMust be knowledgeable of current technological issues and advancementsPreferred Skills and ExperienceService Now KnowledgeVisio KnowledgeMust be able to effectively communicates step-by-step solutions to end-users#NSS#AR Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $75,000.00 - USD $80,000.00 /Yr.

DescriptionSummary: The Information Technology Engineer II(ITEII) assists in the planning, managing and engineering of enterprise database systems. The ITE II is responsible for implementing, design, architecture, life cycle management, configuration, operations and support of the CHRISTUS database environment. This position also performs monitoring, capacity planning and performance tuning along with managing the availability of the database server environment to ensure that no unplanned disruptions or data loss occurs. The ITE IIrequires comprehensive technical knowledge and experience in one or more of the following enterprise database solutions; MS SQL Server, Oracle, Sybase, PostgreSQL, MySQL, MongoDB or MUMPS/CACHE. Experienced database management activities within either Oracle RAC, SQL Clustered or Shared environments or SQL AlwaysON Availability Groups. TheITE IIis responsible for; install and maintain database software and patches, security compliance, capacity planning, test and upgrade software releases, build databases, maintain system level tables, provide support, monitor database instances and servers daily on Linux and Windows based platforms, provide database backup and recovery solutions, implement new technology, and create documentation. Day to day activities include integrating additions and changes into the existing database infrastructure, performance tuning, capacity planning, addressing memory and disk configurations, and automating and managing the database backup and recovery processes, problem resolution and technical support. The position also works as part of a cross-functional teams that deals with the full spectrum of database technology. Responsibilities: Strategy & Planning – Assists in overall architectural design of database standards, assists in the design of new database installations that meet the information system vision and strategy of the organization and advise on matters including memory, disk configuration, sharing host with other applications, etc.; plans, prioritizes, and manages service requests, and routine assignments. System Engineering - Analyzes database configurations; evaluates changes and provides input to the decision-making process relative to resource requirements, and maintenance; creates backup and maintenance plans and recommendations to improve the performance and efficiency of the database infrastructure; prevents unplanned disruptions, especially of critical systems. Restores server databases from backups. System Integration - Integrates database components, subsystems, and facilities into the existing technical environment; assesses database connectivity, computing resources, and impact on other systems; maintains or improves integration and operation of systems relative to the overall environment including configuration in a SAN environment; participates as team member in cross-system projects. Manage security for database systems. System Management - Provides troubleshooting and performance tuning; monitor performance issues and indexes to ensures the systems operate efficiently and meet the needs of the organization; Troubleshoot backup and maintenance plans to address system failures, evaluate memory and disk usage and verify backup procedures; provides training to IM associates and clients as needed Training & Certification - Maintains in-depth knowledge and current certification in Database technologies. Assist other IM teams by providing technical support and guidance. Participate in after-hours support by rotating call schedule on a regular basis. Performs other duties as assigned by management or designee. Requirements: Bachelor's degree in Computer Science, Engineering, Math or related field or equivalent experience (5 years) required. Proven ability to build large scale content management systems that combine data from a variety of sources and formats. Strong understanding of networking fundamentals, especially where pertinent to database issuesMaintain and monitor availability, security, and integrity of databases, including referential integrity checking;Strong understanding of clustering and grid technologies related to database environmentsExcellent written and verbal communication across teams and disciplinesExperience in database replicationDesign database performance specifications, database backup and recovery plans, and database performance/capacity models including disk space capacity plans. Perform advanced database maintenance activities, such as partitioning, index reorganization, transporting tablespaces, and document search management. Assist in recommendation and design phases of database architectures including hardware, software, and the environment architectures thereof. Experience with Enterprise Database Solutions such as; Microsoft SQL Server versions 2016, 2019 or later. Oracle Database versions 12c, 19c or later. Knowledge of local and wide area networking on multiple platforms: Windows, Unix, Linux, Virtualization technologies; network protocols and routing; network, server, and host operating systems, IP networking, server hardware, software, and administration. A total of five (5) years of experience in large corporate systems environment with a wide variety of Information Management systems, networks and technologies required. Must have three (3) years of solid production support experience in one of the following databases: Oracle, MS SQL Server, Sybase, CACHE and/or MUMPS. Minimum of (3) years of enterprise database design and implementation of advanced relationship database components: RAC, DRS, Grid, Log Shipping, or other advance operational or disaster recovery solutionsMinimum of (3) years of architecture experience in relational database high availability solutions maintaining continuous application availability such as DRS, HA, Clustering, hot fail-over or other comparable solutions. One or more of the following certifications is highly recommendedMicrosoft SQL Database EngineerOracle Certified Professional Work Type: Full Time EEO is the law - click below for more information: https://www.eeoc.gov/sites/default/files/2023-06/22-088_EEOC_KnowYourRights6.12ScreenRdr.pdf We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at .

Type of Requisition:RegularClearance Level Must Currently Possess:NoneClearance Level Must Be Able to Obtain:SecretPublic Trust/Other Required:NoneJob Family:ScientistsJob Qualifications:Skills:Applied Mathematics, Data Analysis, Physics, Physics ModelingCertifications:NoneExperience:2 + years of related experienceUS Citizenship Required:YesJob Description:We are looking for a Computational Physicist/Biophysicist with experience in scientific research, analysis and/or engineering. WHAT YOU NEED TO SUCCEED:Masters/PhD equivalent degree in biomedical engineering, applied mathematics, physics, computer science, electrical engineering, numerical analysis, and/or related fields2+ years relevant laboratory experience in academic or industrial setting.Quick, self-directed learnerExperience with Python, C/C++, MATLAB, Linux shell scripting, version control systems (e.g., git)Experience with physics-based modeling and simulation softwareExperience with research communication (papers, conference presentations, etc.)Strong fundamentals in physics and mathematics relevant to radiofrequency propagation in complex media (e.g., electrodynamics, thermodynamics)Familiarity with physics-based modeling techniques (e.g., FDTD, FEM)Experience with computational electromagnetics, thermal modeling, multi-physics modelingExperience with high-performance computingExperience with uncertainty/sensitivity analysisQualifications:U.S Citizenship requiredActive DoD Secret Security Clearance or the ability to obtain one requiredMust be a highly motivated, well organized, and independent thinker with strong problem-solving skills, and great attention to detail.Must be comfortable working in a highly innovative and fast-pace environment and have a strong ability to cope with change.Must possess excellent verbal and written communication skills.GDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidaysThe likely salary range for this position is $80,226 - $103,500. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA TX San AntonioAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high levels of manufacturing and product quality while ensuring cost-efficiency and conformance with regulatory standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Work closely with Raytheon design engineering on new products and special manufacturing process requirements.Review Supplier Statement of Work (SSOW) for compliance and, where needed, implementation of new procedures / processes in order to meet SSOW requirements.Assist with developing cost / pricing strategy for SSOW compliance requirements related to design and manufacturing engineeringEvaluating existing processes and identifies areas for improvementAssist the Quality Engineering with determining root cause in problem analysis and implementing solutionsAnalyze process plans, determining lean-based layouts and work force planning/utilization for maximum efficiencyAssist the Quality Engineering with complete detailed, documented process qualification procedures, including PFMEAs, Quality Control Plans, First Article Inspection Requirements, and Capability Studies.Developing and implementing cost savings and quality improvement projectsUtilize PTC Creo to design simple tooling, jigs and fixturesDevelop, write, and communicate Statements of Work for complex capital purchasesConduct detailed, on-site vendor assessments and auditsProvide Design for Manufacturability review and feedback to product engineering on new product designsDetermine accurate manufacturing costs for new process implementations or improvements and update manufacturing systems with accurate data for planning and accountingIdentify and implement cost savings, calculating anticipated savings and return on investmentUtilize Lean and Six Sigma techniques in all aspects of qualification and problem solvingInterface with customers and organizational bodies as manufacturing engineering representative during customer visits and auditsMust perceptive to direct and indirect impact of proposed solutions on quality, cost, and operator satisfaction and can easily express those values of proposed solutions to all levels in the organization.KNOWLEDGE, SKILLS, AND ABILITIESRequires the knowledge typically acquired through:Completion of a four year Bachelor’s degree or equivalent;Two to three years related experience and/ or training; or equivalent combination of education and experience.Technical writingPresentation skills, with the ability to tailor the message to the audienceLean MethodologiesSix Sigma and related technical problem solving toolsDigital Factory connectivity Ability to write articles for publication that conform to prescribed style and format and effectively present information to top management.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

AirBorn Inc, a 100% employee-owned manufacturer for military, aerospace and other high -reliability equipment industries. Since 1958, AirBorn believes employees are the company’s most important asset. We, as employee owners, are responsible for the creative ingenuity that contributes to the company’s success. Part of the excitement of working at AirBorn is knowing that each one of us plays a role in shaping the future achievements of the company.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Develops methods to test products based on industry standard specifications.Quotes new test activity for internal and external customers.Designs new test fixtures and ensures proper calibration of equipment.Determines equipment, wiring, controls, and data collection necessary to perform a test.Conducts root cause analysis of test failures and recommends corrective actions.Responsible for creating detailed reports to record test procedures, results, and generate numerical and graphical data.Collaborates with engineering and scientific staff on testing results and provides insights for product development or improvement.Ensures that test procedures comply with safety regulations and quality standards.Evaluates and implements new test technologies to improve testing efficiency and accuracy.Design test equipment (Fixtures and test cables) & optimizing & implement test procedures.Develop Test process instructions with training & qualification plan.Implement audit system to ensure test procedures and test accuracy is sustainable.Experience with test equipment for DWV and Continuity/ Contact resistance testing.CAD, CREO experience along with assembly level programmingHands-on experience with fabricating test adapters.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a BS in engineering from an accredited college or university, technical or vocational school, and knowledge in operation of test lab equipment.Three to five years related experience or training, and / or equivalent combination of education and experience.Excellent analytical and problem-solving skills, with the ability to conduct root cause analysis.Strong understanding of advanced mathematical concepts, including statistical analysis and test reliability.Ability to manage multiple projects, prioritize tasks, and mentor junior staff.QUALIFICATIONS -To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, and walk. Performs repetitive tasks using hands to pinch/grasp, handle or feel objects, tools, controls, and reach with arms/ hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized