Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Req ID:443261Address: 3158 I-10 W Seguin, TX, 78155Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for a Mechanical Engineer to join our Test Facility Engineering Team.In this exciting and challenging role you will be responsible for design, manufacturing, implementing, testing, troubleshooting and maintaining Mechanical systems for testing gas turbine engines and test facilities.The Test Facility Engineering Team is responsible for maintaining 51 global Engine Test Facilities, integrating new engine test platforms and sustainment activities for existing test facilities. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, and Honeywell plus others. Members of our team occasionally have the opportunity to travel to remote sites which include several U.S. locations, Canada, the Netherlands, Singapore, UK and Australia.The selected candidate will be part of a team consisting of Electrical, Mechanical, Performance and Computer Engineers as well as Designers and Project Managers to create systems that are compliant, innovative, reliable, maintainable, and easy to operate.Responsibilities will include:Direct the planning, design, engineering, procurement, cost, scheduling, construction, commissioning and troubleshooting activities of multiple major projects by coordinating effort of various internal departments, project teams and outside consulting resources.Prepare conceptual and detailed design of major engineering projects requiring mechanical considerations. Manage projects based on approved timelines and project management principles. Provide technical and financial data for preparation of project justification and cost benefit analysis.Review and evaluate contracts for work to be performed by consultants and outside contractors, approve plans and designs and resolve problems as they arise.Monitor all work in progress to ensure that quality and engineering standards are met. Act as a liaison with internal and external customers, assuring satisfaction with progress and quality. Participate in projects as a team member and/or team project leader.Carry out special duties as assigned.Ability to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the timeEducation Requirements: University degree in Mechanical or Industrial Engineering4 plus years of experiencePosition Requirements:Experience with mechanical designs and related instrumentation.Experience working with hydraulics, compressed air and fuel systems. Working knowledge of PCs in the current company operating system environment.Strong planning, organizational, analytical, interpersonal, decision making, oral and written communication skills.Strong project management skills.Experience with project management in a manufacturing environment.Working knowledge of federal and provincial fire, building, plumbing and electrical codes an asset.Working knowledge of gas turbine engines and specific product knowledge an asset.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Contact customer representative and ascertain equipment/systems problems.Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications.These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge, and fire pumps.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc., to diagnose and repair equipment.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit effective customer service skills by consistently communicating with the district staff and customers to ensure complete customer satisfaction.Electronically complete Service Acknowledgements with proper coding and obtain customer’s signature.Participate in a scheduled On-call rotation.Perform other duties as assigned.What we look forRequired5 years of documented experience in Fire Sprinkler/Suppression industry Experience in reading and interpreting blueprints, submittals, and operational/product manualsHigh School Diploma or equivalent required Must be willing to travel.Ability to follow verbal and written instructionsCapable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. Ability to work flexible hours including weekends to meet customer requirementsAble to participate in an on-call rotation schedule - Overnight travel will be required Demonstrate a high level of customer serviceMaintain truck inventory to ensure timely response to customer needsAbility to adhere to, implement, and always follow safety guidelines and proceduresStrong organizational skills, positive attitude, and an ability to learn quicklyPossess a valid driver’s license and driving record that meets company requirementsAble to pass a pre-employment background and drug testMust possess and retain current State Fire Protection License or Journeyman License validPreferredBackflow, fire pumps, underground, overhead and standpipe license#TechHiring

Fire Alarm Service Technician San Antonio, TX, USA Texas, USAReq #822 Tuesday, September 3, 2024 Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive:Competitive compensationCareer Advancement Opportunities Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industry This position reports to the Fire Alarm Manager or their designated Agent. The Technician will be responsible for providing inspections and service on a variety of fire alarm system devices in a professional and timely manner. The Technician will be expected to meet weekly service and productivity goals. The Technician will work with the Company to obtain local city listing agents. The Technician is also responsible for maintaining a clean, well-organized vehicle and ensuring a safe environment for his/herself, co-workers and customers.Job ResponsibilitiesManage their time to complete the maximum amount of service and inspections while maintaining a high level of quality.Achieve any weekly productivity goals assigned by the Fire Alarm Manager or designated Agent.Learn applicable fire protection codes and obtain applicable state licensing.Protect and maintain company equipment.Work in a safe manner as outlined by company safety procedures including the driving, personal protective equipment, and lockout/tag-out policies.Maintain their vehicle in accordance with company procedures and ensure it is clean and organized.Perform any other tasks assigned by the Fire Alarm Manager or Agent.Job Qualifications:Applicable licensing and certification required by National, State and Local codes.Texas Fire Alarm (FAL) is required.Ability to learn applicable installation, inspection, and servicing codes.Ability to participate in on-call rotation.A strong work ethic and professional appearance.Excellent communications, and customer service skills.Possess a valid driver’s license and driving record that meets company requirements.Preferred QualificationsApplicable experience either in the fire protection industry or the commercial customer service business in some capacity.A fire alarm systems background or a background working as a licensed electrician.Ability and willingness to obtain NICET and other trade specific certifications. Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Other details Pay TypeHourly

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. San AntonioTexasUnited States of America

AutoReqId: 19983BR Pay Class: Hourly Hourly Pay Rate: $23.64/hr DOE Department: Production Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftPlant Maintenance Mechanic for our Servtex quarry located in N ew Braunfels, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentWeld and torch certification a plusMSHA Part 48 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

$18.00/hourShift Premium may ApplyImmediately hiring! Are you a responsible and detail-oriented individual with a deep passion for automobiles Look no further! We are currently seeking enthusiastic candidates who have recently completed a technical school program or gained experience in manufacturing, warehouse operations, automotive garages, or auto dealerships. If you're looking for an exciting opportunity, become a valued member of Avis Budget Group organization.What You'll Do: You will perform preventative maintenance functions on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs and rotations, all in a safe manner. Depending on your experience, you may be assigned basic repairs or assist our experienced auto mechanics.Perks You'll Get: Bi-weekly pay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities, help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordProven car mechanical or maintenance skillsComfortable working in a mechanical shop with moderate or loud noise levelBasic computer skills (typing, data entry)Flexibility to work all shiftsMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotely6 months auto maintenance or auto tech school degree a bonus!Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer - M/F/Veterans/Disabled. This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. San AntonioTexasUnited States of America

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doResponsible for designing, installing, and servicing the software and hardware for integrated applications following governing codes and standards. Design, install and service various types of communication applications to include wireless and LAN/Wan based security, fire, video surveillance and access control solutions following governing codes and standards. How you will do it Design installs and services the software and hardware for integrated systems/applications without supervision.Completes system and network programming as required.Locates and clears trouble with damaged equipment or wiring, readjusts equipment, repairs, or replaces inoperative equipment and tests for proper operation.Maintains a positive liaison between Tyco IS and the customer to ensure proper communication is filtered through the Tyco IS and the customer organization while maintaining a high degree of professionalism and customer satisfaction.Coordinates testing and final acceptance of system/application with the customer, police, fire, or other agencies as required.Ensures proper application of systems products to meet customer requirements. Responsible for engineering, configuration, installation, maintenance, and support of data/video communication networks including wireless and IP solutions.Develop and provide training and technical support tools for users with varying levels of IT, Security and Fire knowledge and competence.Construct and maintain up-to-date and accurate documentation of security, fire and network configurations, diagrams, and programming records. Create detailed security, fire, and networked server documentation, including physical diagrams, logical diagrams, IP address schemes and asset management and database designs.What we look for RequiredAssociate degree preferred or equivalent work experience.High School Diploma required.Must have a valid driver license.Variety of Security, Fire, and communication manufacturer product certifications.State and Local Certifications as required.Have the aptitude and or the years of experience capable of designing, installing, inspecting, and repairing integrated systems/applications.Have the aptitude and experience in wireless and LAN/WAN network engineering using Cisco products including Layer 2/3 Switches and Routers.Experience with and solid working understanding of Cisco switches, routers, IOS software and diagnostics.Good working knowledge of required technical hardware such as Cisco Routers, CSU, DSU, bridges, multiplexers, servers, and switches; knowledge of building, configuring, and troubleshooting campus networks and remote access networks using Cisco Catalyst multi-layer switching technologies over high-speed Ethernet and Cisco routers connected to wired and wireless LANs.Excellent oral and written communication skills.Excellent organizational skills. Manage multiple tasks and resources.Client/Server diagnostic support skills to understand how applications communicate within LAN/WAN/MAN networks and over the Internet.Good understanding of IP Backbone Architecture, TCP/IP protocol.Strong analytical and troubleshooting skills.Ability to effectively interact with internal organization and customer representatives and be a team player at all levels.Possess a high level of PC literacy.Must possess advanced knowledge of designing, installing, inspecting, and repairing integrated systems/applications.Ability to work independently or in a team environment.Interpret/read blueprints, building plans, electrical, schematics and sprinkler/fire plans to complete equipment installations, repairs, inspections, and clear troubles.Ability to occasionally travel out of town to customer locations and training.Must be available after hours to provide off-site software and hardware support and if required on-site support to resolve system failures for integrated applications. PreferredProject Management will be an optional requirement. Fire and Project Management will be an optional requirement. Cisco Certifications (CCNA or higher) and SE or FE, MCSE Preferred unless required for a customer need than this would be required.NICET Fire Level 1 and 2 required, 3 preferred.NICET Access Control and Close Circuit TV preferred.Experience with Software House, American Dynamics, Bosch, DMP, and other Enterprise Level Access Control systems, CCTV, and IP video systems.

Req ID:441838Address: 3158 I-10 W Seguin, TX, 78155Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Tire Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. If you are looking for a great opportunity to grow along with a winning team, join us today. No experience No problem! We will teach you!Job Functions:Take ownership of the sale, removal, and replacement of tires up to, but not limited to, commercial vehicles in shop and roadside service. Be responsible for equipment repair and maintenance of the store facility including general housekeeping duties.Ability to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures. Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s)Our CultureWe are a 60-year family-owned enterprise that creates an environment where team members can thrive, driving the company forward and building a rewarding career with unmatched growth opportunities.Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 3 years of practical working experience on air cooled and/or water-cooled chillers or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians and when necessary, provide on the job training.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization to support the fast-growing Data Center market. You will be part of a centralized team supporting Data Center customers in San Antonio.How you will do itWe are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a Data Center team responsible for startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 3 years of practical working experience on air cooled and/or water-cooled chillers or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 142 rates.Comprehensive benefits package provided by the UA Local 142.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doDo you have HVAC AIR-COOLED CHILLER experience We are looking for HVAC systems mechanics who have worked in commercial and industrial markets to join our team working with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a factory representative to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in commercial mechanical equipment and diagnostics. Responsibilities may include but not limited to repairs of air-cooled, centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired5 years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.Computer savvy with good verbal and written communication skills.EPA Universal Refrigerant CertificationPreferredExperience with YORK, and air-cooled Centrifugal applied equipment.#TechHiring

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out: https://youtu.be/pdZMNrDJviYWhat you will doHVAC Mechanical Project Team LeaderUnder general supervision, responsible for the overall execution and performance of mechanical retrofit projects. Responsible for following consistent and repeatable project management standardized procedures and processes and achieving financial results on assigned projects. Provides project coordination for day-to-day activities of Mechanics and sub-contractors. Secures new work and Change Orders from the existing customer base. Provides mechanical project estimating and estimating reviews. Acts as a technical resource for Sales. Responsible for overall project safety program compliance. The expectation is for the PTL to devote 50% of their time to development and 50% to project execution.How you will do itPlans, executes and manages assigned mechanical projects.Oversees the mechanical retrofit process to ensure that it is performed in accordance with Johnson Controls standard practices.Facilitates escalation of product related problems.Secures new work and change orders from the existing customer base.Estimates mechanical work and presents proposals to the customer. Acts as a technical resource for Sales.Assists sales in project development efforts and performs pre-bid reviews.Recruits, hires and supervises resources to staff the project team. Interfaces with the Truck Based team(s) to control manpower to proper staffing levels. Reviews and interprets contract Terms and Conditions.Coordinates with support teams on drawing layouts / detailing for proper job installation. Analyzes financial reporting systems and project schedules to proactively address potential problems and manage risk.Investigates solutions and establishes project recovery plans. Participates in monthly backlog review. Provides ongoing cost and estimate analysis reporting. Manages allocation of costs to financial reporting systems.Uses Johnson Controls standard tracking and reporting tools to effectively communicate project progress and financial status to management. Proactively investigates opportunities for improvements in the project scope that will result in value added change orders.Performs associated cost estimates, prepares proposals and secures customer acceptance. Responsible for asset management including collections, cost control, progress billings and payables.Oversees assigned projects for compliance with specifications, local codes and installation techniques. Consistently negotiate buy out of materials, equipment and subcontracts and resolve disputes.Manages material procurement, warehousing and logistics processes. Provides high quality written communications.Ensures project document controls comply with contract requirements and Johnson Controls standards.Develops and maintains viable long-term relationships with customers and subcontractors. Leads job progress meetings as required.Ensures subcontractors understand expectations of the project. Owns and manages project execution plan including updating the project schedule. Ensures close out transition to appropriate Johnson Controls Truck-based team is achieved.Coordinates performance of owner training requirements. Adheres to safety standards. Ensures that Johnson Controls team members, and subcontractors adhere to safety standards.What we look for Six or more years of comprehensive, technical and operational knowledge of the HVAC service business, particularly related to smaller fast track retrofit, remodel and tenant improvement types of projects.Leads assigned Mechanics on a portfolio of projects typically $3-4M in revenue.Two to four years of engineering or trade school training such as an engineering degree or equivalent is preferred.Installation and Service experience related to complex HVAC Mechanical systems and equipment is desired.Demonstrated verbal and written communication skills.Must have the ability to communicate technical information to a non-technical audience.Proficient in Project Management software and financial accounting systems. Strong Personal Computer capabilities in MS Office (excel, word, power point), Adobe Writer, Visio and basic Windows environment.