SEARCH
GO
Skilled & Trades Jobs
Full Time
12/1/2024
Houston, TX 77026
(8.4 miles)
$18.00 / hr
Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized
Full Time
11/26/2024
Houston, TX
(12.1 miles)
The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
Full Time
11/17/2024
Mont Belvieu, TX 77521
(23.1 miles)
$22.50 / hr
Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.
Full Time
11/17/2024
Mont Belvieu, TX 77521
(23.1 miles)
Full Time
11/16/2024
Houston, TX 77092
(11.4 miles)
Harris County Flood Control District is seeking a qualified candidate for the role of Field Data Collector.
This position is responsible for identifying and documenting physical conditions and features of channels and other District facilities for the Geographic Information Services (GIS) Department in accordance with the District’s mission to maintain the Infrastructure.
Essential Functions & Duties: Identify and document the condition of the District’s assets using hand-held computers, GPS equipment, and digital cameras. Create GIS data required for asset assessment in the field. Update asset data in the District's GIS databases. Perform other duties that may be added or changed as the course and scope of the job directs.
Requirements: High school diploma or equivalent. Two (2) years of experience using GIS products, equipment, mapping, and computer-aided design. One year of experience may be allowed for each year of college education in GIS-related coursework completed. Experience with Esri’s GIS software, including ArcGIS Pro and/or ArcMap. Valid Class C Texas Driver’s License. Must be able to operate an all-terrain vehicle (ATV). Excellent organizational skills. Can work independently with limited supervision. Good knowledge of Microsoft Office applications. Ability to prioritize and manage multiple projects and/or assignments. Excellent written and verbal communication skills. Proficiency with Esri Software including Field Maps, ArcMap, and ArcGIS Pro.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Physical Demands & Environmental Exposure: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Frequent stooping, bending, reaching, lifting, and carrying of items up to 11 pounds and occasional lifting of up to 20 pounds. Frequent driving of a vehicle with automatic controls. Approximately 90% of work will be performed outdoors where there will be routine exposure to significant levels of rain, heat, cold, moisture, air pollution, noise, wind, and dust. May be exposed to environmental hazards such as chemicals, wildlife, vegetation, and rough/uneven surfaces such as sloping terrain, plowed or furrowed areas. Some work will be performed in a professional office environment and role will routinely use standard office equipment such as computers, phones, photocopiers, two-way radios, digital cameras, printers, filing cabinets and scanners.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, which is the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.
This position is subject to a criminal history check. Only relevant convictions will be considered and, even when considered, may not automatically disqualify the candidate. Employment may be contingent on passing a drug screen and meeting other standards.
Harris County is an Equal Opportunity Employer
Full Time
11/16/2024
Houston, TX 77040
(13.0 miles)
The Harris County Flood Control District is seeking a qualified candidate for the role of Regulatory Compliance Coordinator.
Responsible for coordinating environmental investigations, assessments, permitting, and other compliance activities for all flood control improvement and maintenance projects within assigned watersheds and project areas. This includes assisting the Regulatory Compliance Section Leader in coordinating environmental compliance tasks in support of the District's mission.
Essential Functions & Duties: Respond to Environmental Service requests for designated projects as submitted by Planning, Engineering, Construction, and Infrastructure Divisions and manage subsequent environmental support tasks. Manage consultants as necessary to perform designated support tasks, including requesting, reviewing, and approving proposals and bids to perform work and providing quality control and quality assurance of deliverables received from consultants and contractors. Attend project team meetings and provide environmental compliance recommendations and status updates. Ensure compliance with Federal, State, and local environmental laws, rules, and regulations. Support communications with the public and with environmental organizations, and coordinate with other District departmental staff, other local governments, State and Federal governments, and non-profit organizations to facilitate joint use projects within District facilities. Provide project management for environmental research and investigations, as required, and track projects in the District's applicable project tracking database. Perform other duties that may be added or changed as the course and scope of the job directs.
Requirements Bachelor's degree from an accredited four-year college or university in any one of the natural or earth sciences, environmental planning, or a related field. Valid Class "C" Texas Driver’s License. Two (2) years of experience in the management of environmental compliance. Previous experience using ESRI ArcGIS or similar digital mapping software. Strong skills using Microsoft Office applications (Outlook, Word, PowerPoint, and Excel) Strong skills using digital photo management software Familiarity with Federal, State, and Local environmental rules and regulations with demonstrated proficiency in National Environmental Policy Act (NEPA) compliance. Excellent written and verbal communication skills Excellent organizational skills Familiarity using Adobe Acrobat and Bluebeam Can work independently with limited supervision Ability to prioritize and manage multiple projects and/or assignments Can work well with the public, interest groups, government agency personnel and external organizations
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: Prolonged sitting for extended periods of time. Frequent sorting, filing, shelving, and handling of documents, books, files, file drawers and related materials and equipment required for clerical operations. Frequent stooping, bending, reaching, lifting and carrying of items up to 11 pounds and occasional lifting of up to 20 pounds. Occasional ascending/descending stairs. Occasional standing and walking on rough and uneven surfaces or ground, such as deep sloping terrain, plowed or furrowed areas, or construction sites. Occasional driving of a vehicle with automatic controls or four-wheel drive. Requires extensive use of a video display terminal (computer monitor). Approximately 90% of duties will be performed indoors in a normal office environment with acceptable lighting, temperature, air conditions, and noise levels. Approximately 10% of duties will be performed outdoors where there will be routine exposure to significant levels of heat, cold, moisture, air pollution, wind, and dust. When at field locations may be exposed to snakes, wildlife, wasps, bees, and other flying/walking insects, aquatic bacteria, viruses, and other micro-organisms, vibration, and/or noise in excess of 85 decibels.
This position is subject to a criminal history check. Only relevant convictions will be considered and, even when considered, may not automatically disqualify the candidate.Employment may be contingent on passing a drug screen and meeting other standards.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.

Harris County is an Equal Opportunity Employer
Full Time
11/15/2024
Houston, TX 77086
(10.3 miles)
The Harris County Flood Control District is seeking exceptional candidates for the position of Inspector with the Construction Division.
Responsible for observing, inspecting, and documenting work-in-progress on construction project sites to ensure the work is being performed in accordance with sealed and approved construction plans, sound construction practices, and all applicable local, state, and federal permitting and approvals. Inspections include site clearing observation, grading, excavation, backfilling, and/or installation of reinforced concrete structures such as box culverts, low flow sections, slope pavement, inlets, manholes, and street sections.
Essential Functions and Duties: Perform daily inspections of construction sites and work completed to ensure projects are constructed in accordance with the sealed and approved construction plans, follow good construction practices and standards, and are applicable to local, state, and federal permitting. Coordinate with contractor representatives on work scheduling, interpretation of plans and specifications, and acceptability of materials and workmanship to ensure compliance with sealed plan requirements. Inspect materials on construction sites to ensure compliance with technical specifications and drawings, and schedule independent material testing and engineering companies to assist with quality assurance. Report all reject materials and deficiencies in construction methods. Document, photograph, and maintain daily reports summarizing construction progress, scheduling, workmanship, and deficiencies of construction materials and methods. Collect and review supporting documentation for payment of work performed, consisting of delivery tickets, invoices, product labels, sketches, calculations, and other related records that identify approved materials and products used to support quantities for payment. Prepare for and communicate substantial completion and final walk-through of projects to address any questions or concerns and finalize completion punch list with assigned contractor. Perform other duties that may be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: Valid Class "C" Texas Driver License Knowledge of Microsoft Office applications. Good verbal & written communication skills. Ability to prioritize and manage multiple projects and/or assignments. Good organizational skills. Knowledge of construction standards, practices, and techniques. Knowledge of bayou, drainage area, and rights-of-way maintenance.
Preferred Experience and Education: Associate degree or higher in Construction Management or a related field from an accredited college or university. Previous inspection experience in interpreting drainage and flood control construction plans and inspecting construction installations.
This position is subject to a criminal history check. Only relevant convictions will be considered and, even when considered, may not automatically disqualify the candidate. Employment may be contingent on passing a drug screen and meeting other standards.
The Harris County Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The District has jurisdiction over the county's primary stormwater facilities, consisting of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks.
Harris County is an Equal Opportunity Employer
Full Time
11/13/2024
Houston, TX 77041
(17.1 miles)
$20.00 to $30.00 / hr
We are seeking a Class A CDL Driver with experience hauling and operating heavy highway equipment for a Heavy Highway Road & Bridge Company working in Houston and surrounding counties.
Performs pre-trip and post-trip inspection of trucks, trailers, and equipment Transports equipment to job sites Safely load/unload excavators, cranes, backhoes, loaders, motor graders, dozers Must be able to safely operate dump truck and water truck Works with hydraulic tools, hand tools, and electrical tools Performs manual labor as needed to accomplish work and meet job accomplishment expectations Responsible for keeping the work-site, vehicles, equipment and tools are safe, clean and ready for use Must be flexible/work-ready to perform tasks for other departments/locations as may be required to meet needs Follow all required safety policies and procedures Other duties as assigned
Pay rate: $20 - $30/hr based on experience
Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Qualifications: CDL - Class A (Required) 2 years experience as a CDL Driver with ability to load and haul heavy equipment Minimum 2 years experience within the road construction industry Must have a clean driving record Must pass a physical and drug/alcohol test Must be able to pass a background check We participate in E-VERIFY
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
Forde Construction is an Equal Opportunity Employer
Full Time
11/14/2024
Houston, TX 77032
(1.8 miles)
POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .
Full Time
11/12/2024
Pasadena, TX 77508
(27.9 miles)
Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTLOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11932 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.
Full Time
12/2/2024
Houston, TX 77090
(9.9 miles)
Area Director of Environment of Care (Facilities Management)- Skilled Nursing*** If you have 3+ years of experience in the skilled nursing industry as a Maintenance Director and seeking an opportunity to grow- this apply today!Must be able to travel weekly and support 24/7 with communitiesJoin our family. Make a meaningful difference. Become a part of The Team and contribute to our Mission of Serving Others.Touchstone Communities is dedicated to delivering top-notch care to our patients, residents, and Veterans. Our goal is to honor God by providing compassionate, skilled care to those in need. We are looking for individuals who are aligned with ourmission of enhancing the lives of those we serve. If you are passionate about making a difference, providing healing, and showing empathy in aworkplace that values every individual's voice,we invite you to submit your application today!Who are we seeking Commercial Electrical and Commercial Plumbing experience preferred.Troubleshooting and repair of equipment is preferred.OSHA 30-Hour training course required.Legionella Water Safety & Management certification preferred.Building Management System experience preferredMust possess strong technical assessment and observational skills.Will report to the VP of Environment of CareEssential Job duties include but not limited to:Appropriately assist the Administrator in managing Community Directors of Maintenance (DOM)Consistently ensure that the community maintains compliance to Life Safety requirements providing a safe environment for our residents, veterans, patients, family members and team members.Responsible for the interior and exterior physical environment to meet regulatory requirements.Train and assist DOM when the community has not or cannot resolve any issue.Assist, provide on-going training and consulting with Community Maintenance Supervisors and their assistants as needed on all duties and requirements of the maintenance department.Assess the use of TELS for:•Completion of assigned task and accurate reporting•Downloading of reports (fire drills, fire safety inspections, generator reports, etc.)•Work order usage•To ensure compliance across the organizationConsult with contractors on scope of work and pricing in proposals for work.Manage contractors, inspect contracted work, and providers guidance on discrepancies.Conduct annual community audits to include Life Safety, equipment condition, building appearance, deferred maintenance, safety concerns, capital needs and maintenance staff assessments.Function as the subject matter expert for the regional team on Life SafetyAbility to interpret operating policies and procedures and to review work performance in determining conformance to these recognized standards.We offer our eligible team members an appealing benefits package that includes medical, dental, wellbeing, and vision benefits, along with other unique perks such as:We offer a health allowance which covers the team member medical plan! Benefits start the 1st of the month after employment.Salary Range: $60,000- $65,000 DOE.Additional supplemental benefits are offered including pet insurance!Paid Time Off; Bereavement Pay; and Jury Duty PayTuition Reimbursement ProgramMatching 401(k)Travel reimbursement per company policyCell phone reimbursementLegal benefits and will preparationAvailability of Team Chaplain
Full Time
12/8/2024
Houston, TX 77246
(21.2 miles)
Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salaryPaid vacation/holidaysComprehensive benefits packageOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat you will do Responsible for Service customer account leadership, including Labor and Material growth and execution of the Service business, for the team’s customer base. Drives profitability and productivity of the team. Manages customer relationship development and satisfaction. Responsible for employee development and retention and for safety program compliance. How you will do it Under the direction of the Branch Service Manager or Metro General Manager:Adheres to goals for customer account gross margin delivery and profitability, including Planned Services Agreements and Labor & Materials (L&M) work. Drives L&M and PSA growth through union-represented service team members.Leads the execution efforts of assigned Service business to include warranty-related customer issues. Responsible for maintaining fleet and tools inventory. Uses JCI Electronic Platforms to ensure consistency in performance of leading, lagging metrics and financial outcomes.Reviews and makes recommendations on all L&M and PSA quotations. Reviews Technicians weekly time & expense.Responsible for forecasting and performance of accounts payables/receivables. Responsible for recommending and maintaining appropriate staffing levels to accommodate existing and new business needs.Responsible for on-boarding and training of new employees as well as the day-to-day performance of the union-represented service team members, assists in the conducting of performance reviews, and resolution of performance issues with the guidance of assigned Branch Service Manager or Metro General Manager.Responsible for safety performance and program compliance. What we look for Required Technical school training or equivalent experience in commercial building or industrial HVAC.Three or more years of supervisory experience in a similar service deliverable environment. Strong ability to prioritize work activities for the team, scheduling, and lead a diverse team. Strong ability to lead through a centralized back-office matrix environment.Strong interpersonal, customer service, negotiating skills. Demonstrated competence in writing and verbal communication skills. Basic financial accounting experience. Demonstrated proficiency in MS office products and basic Windows environment. Preferred Diploma in Electronic or Mechanical Systems. Two or more years apprenticeship diploma.Two years prior experience in the HVAC or building controls industry.
Full Time
12/1/2024
Houston, TX 77028
(7.3 miles)
Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is hiring a Fleet Maintenance Manager with ASE Master certification. This senior-level, dynamic, and multitasking professional will oversee all daily maintenance operations for a para-route van service. Key responsibilities include meeting all contractual maintenance requirements and delivering detailed daily, weekly, monthly, and annual reports. The role also requires effective budget management to support the overall maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Working with 150 + buses within the last year and previous passenger transportation in current project or similar environment.ASE Master certifications required and ability to teach is highly preferred.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Ability and willingnessto communicate effectively with all levels of staff in written and oral formats.Strong Computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast
Full Time
11/28/2024
Pasadena, TX 77505
(21.8 miles)
Overview: National Tank Services stands proudly at the forefront of North America's truck maintenance and tank cleaning services industry. Our commitment is unwavering as we offer a comprehensive range of solutions, including inspections, repairs, certifications, and top-tier cleaning services to support the thriving bulk transportation sector. We've got all the tools fleets need to maintain certification, prioritize safety, and stay compliant.Are you prepared to embark on a career with meaning Your journey begins here - become a part of our NTS team today!Contact our team of in-house Recruiters: 1-866-8-TRIMAC Pay Details: Starting pay $26.50 (depending on experience) Schedule: Monday- Friday 2:30 pm - 10:30 pm Responsibilities: Perform preventive maintenance on trucks and trailers while utilizing personal safety equipment as required.Move trucks and trailers in and out of shop for maintenanceOpen repair orders and charge the appropriate parts to the repair orderPerform tire inspections/appropriate paperwork to company standardsPerforms shop clean-up and housekeeping responsibilities as well as other miscellaneous related duties as assigned.Inspects and maintains basic vehicle/accessorial worthiness including proper fuel levels and tire air pressure, fluid levels, brakes, lights, and safety equipment and submits reports indicating condition of equipment.Comprehend and perform Driver Vehicle Inspection Repair (DVIR) processDiagnose and repair: Tire/wheel, Brakes & Air Systems, Clutch & Linkage, Mud flaps/hangersPossesses and demonstrates the ability to perform assigned tasks in a manner that adheres to the company's Safety, Health, Environmental, and Security policies. Qualifications: Must have a valid driver’s license1-5 years experienceAbility to provide own basic hand toolsBasic computer skillsAbility to read and comprehend service manualsKnowledge of tools and equipment used in the shop to repair and maintain company equipmentA basic knowledge of tractor and trailer maintenanceKnowledge of D.O.T. regulations and out-of-service parameters for tractors, trailers, and accessorial equipment.Knowledge of proper procedures for handling and disposal of hazardous waste materials. Benefits: Paid weekly by direct depositHoliday and vacation payMedical, dental, and vision insuranceEmployee Assistance ProgramLife Insurance & Disability InsuranceFlexible Spending Accounts (Health & Dependent Care)401(K) profit sharing with company match (fully vested after 3 years) Safety Commitments: We make safety a part of every decisionWe make safety personalWe have the courage to intervene Pay Range: Starting from USD $26.50/Hr.
Full Time
12/8/2024
Houston, TX 77246
(21.2 miles)
D&S Community Services, a part of the Sevita family, provides community-based services for individuals with intellectual and developmental disabilities. Here we believe every person has the right to live well, and everyone deserves to have a fulfilling career. You’ll join a mission-driven team and create relationships that motivate us all every day. Join us today, and experience a career well lived.Maintenance AssociateHouston, TX Pay: $18/ hourSchedule: Monday - Friday 8a-4:30p Your Role Providing repair and upkeep services for the residences of our clients, which may involve troubleshooting plumbing or electrical problems, fixing appliances, etc.Conducting inspections and addressing damages in different parts of buildings.Performing painting and surface refinishing tasks.Applicants must possess their own tools for the tasks.Assisting with basic vehicle maintenance, such as changing a flat tire or replacing a brake light bulb. Qualifications: High School diploma or equivalentApplicants must possess their own toolsMinimum 1 year of related experienceWorking knowledge of and ability to handle all maintenance and electrical equipmentAbility to manage/prioritize multiple tasksEffective communication skills and well-developed problem-solving skillsExceptional attention to detail and a commitment to quality in everything you do Why Join Us Full, Part-time, and As-Needed schedules availablePaid Time Off and Health benefits to employees working a minimum of 30 hours/weekPaid training and holiday payCareer development and advancement opportunities across a nationwide networkWork with some of the best co-workers you could ask for and see your impact on the lives of those individuals we serveSince our funding comes from Federal and State payers, we offer stability and secure work opportunities We have meaningful work for you – come join our team – Apply Today!Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.
Full Time
12/5/2024
Baytown, TX 77522
(9.6 miles)
Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1
Full Time
11/16/2024
Houston, TX 77065
(17.2 miles)
Overview: CONSIDER MAKING A MOVE TO STERLING MCCALL COLLISION CENTER OF JERSEY VILLAGE!SIGN-ON BONUS FOR QUALITY CANDIDATES!WE ARE A QUALITY COLLISION CENTER WE REPAIR ALL MAKESSterling McCall Collision Center of Jersey Villageis part of the fast growing Group 1 Automotive, a leader in automotive retail. We are looking to add an additional COLLISION REPAIR/BODY & FRAME TECHNICIAN to our team. We are a high volume collision centerwith plenty of work, state of the art facility, with all the latest equipment to help you perform efficiently!This opportunity comes with TOP TIER PAY!In addition to competitive pay, we offer our associates the following benefits:Health, Dental, Vision, Life, and Disability insurance401(k) plan with company matchPaid Time-OffEmployee Stock Purchase PlanEmployee Vehicle Purchase ProgramProfessional work environment, with job training and advancement opportunitiesResponsibilities:Repairs vehicles per estimate and according to manufacturer standards.Notifies management of any additional repairs needed. Documents and additional parts and labor required to perform a satisfactory repair.Maintains and wears all required safety and health personal equipment, including respirator, in the manner recommended by the equipment manufacturer.Demonstrates behaviors consistent with the Company’s Values in all interactions with customers, co-workers and vendors.You need:2 PLUS Years’ experience as a collision repair technician with heavy structural collision and frame experience.ICAR or ASE certifications in auto body repair a plus.Company provides paid training.Working knowledge of all aspects of repairs for damaged vehicles including body work and when to replace or repair parts.Valid driver license in the state that you will work and a good driving record.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*We are an Equal Employment Opportunity EmployerIND2
Full Time
12/1/2024
Pasadena, TX 77506
(16.9 miles)
Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionWe are currently seeking a Manufacturing Maintenance Manager to be located in our Pasadena, TX location and report to the Factory Manager. This position is responsible for leading the maintenance team across one medium retail factory. The role will have a key responsibility for leading the factory in developing and executing the Preventative Maintenance methodologies and Primo Brands Maintenance Strategy implementation plans.Key responsibilities include but are not limited to the following: •Lead a Technical Resource who supports our maintenance mechanic team. •Monitor the Maintenance and Improvement (M&I) strategy, plans and objectives in the factory/facilities. •Maintain competencies, motivation and commitment to achieve the M&I and objectives. •Encourage continuous improvement, networking and sharing information within the M&I community such that it becomes a key element of the M&I culture. •Demonstrate and promote the company's values with impact on the M&I and MWG teams. •Own the successful execution of capital projects for the factory utilizing the Early Management tools and methodologies. •Deploy training and communicate continuous improvement strategies to factory personnel and others as needed. •Maintain a good understanding of the facility including which lines, processes and utilities are critical to the business where failure can have an unacceptable impact on the business, safety, environment or compliance with the law. •Ensure existing maintenance strategies are retained until viable AM/PM activities are sufficiently embedded to ensure continuing equipment and business performance. •Support and encourage the implementation of the engineering tools such as PM, EM, AMM, etc. •Participate in local audits. Ensure action plans are in place and are being implemented as per the plan. Be proactive in investigating any issues relating to non-compliance, major breakdowns and non-conformance with key performance indicators. •Work closely with Factory personnel to implement continuous improvement strategies across the factory. •Evaluate current progress on MWG, driving the implementation of Best Practices related to systems, processes, methods, organization, staffing, and employee skill levels. •Coordinate and coach activities of factory leaders to ensure full alignment with the PM Implementation Strategy. •Lead the factory to optimize the use of Predictive Maintenance technologies.QualificationsKey qualifications include: •Minimum 5-7 years of experience in a technical field, preferably in food or beverage manufacturing or consumer goods industry, of which several years were as a leader of the Maintenance function or Factory Engineer in a plant. •Knowledge of Maintenance Excellence programs including Asset Management, Breakdown Analysis, FMEA and Reliability Centered Maintenance. •Experience leading a Maintenance Improvement Team in a factory environment with demonstrated results. •Strong technical and leadership skills. •Breakdown Analysis. •Reliability Center Maintenance Practices. •PM Optimization. •Predictive Maintenance Technologies including (infrared, ultrasonic, vibration analysis, etc.) •Knowledge of food safety, regulatory requirements for food safety and hygienic engineering. •Analytical skills in problem solving such as DMAIC, Breakdown Analysis (BDA), FME, ETC. •High level of motivation and self-management. •Understanding of financial analysis and relevant business drivers. •Asset Maintenance Management. •Project Engineering/Management (demonstrated project management skills).Primo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at
Full Time
11/22/2024
Houston, TX 77246
(21.2 miles)
Powell in Houston is currently seeking a Senior Field Service Technician. Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of electrical distribution equipment across the US and Canada. This includes performing installations, preventative maintenance, and corrective maintenance. The ideal candidate thinks critically, can work well in a team setting, and is a problem solver. Field service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified service technicians are provided safety and technical training with full office support. Once qualified, technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, phone compensation, and company expense card.This position does not offer visa sponsorship now or in the future.Essential ResponsibilitiesAdhere to Powell's current safety and quality standardsComplete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing.Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service ManagerMaintain flexible work hours, which will include over time and periodic weekend supportMust be available to travel up to 85% of the year.Comply with Powell standard operating procedures, documentation processes, safety processes and protocols.Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric mannerAble to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects.DC / AC Switchgear and Power Control Room (Electrical Enclosure, Power Control Center) installations, in addition to trouble shooting, testing and repair of the same type of equipment.Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing.Perform regular inspections of any issued vehicle or calibrated equipment/tools.Provide support to services manufacturing group. May consist of construction, installation, wiring and testing.Minimum QualificationsField service technicians are required to have 4 years as a shop and / or field electrical / breaker technician.Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applicationsBasic knowledge of electrical air and surface creepage clearance requirements.Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project.Preferred QualificationsBasic familiarity with contactor and circuit breaker schematics (Preferred).Basic understanding of hi potential testing (Preferred)Basic understanding of low resistance testing (Preferred).Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred).NICET Level 1 certification (Preferred).HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified).NFPA 70E Trained (Preferred / Training can be provided).OSHA 10 / 30 Trained (Preferred / Training can be provided)Skills, Abilities & Other RequirementsDemonstrate basic knowledge in the design and manufacture of bus and structural modification projects.Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory.Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control roomsWorking EnvironmentThe Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows:Medium physical effort (lifting/moving up to 50 pounds)Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time.Work at heights greater than 10'.Work on ladders of all types.Work on scissors and bucket lifts (on occasion).In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment.More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.About UsIn our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications!Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.
Full Time
11/17/2024
Conroe, TX 77303
(30.8 miles)
Description Position at Pipeline Carriers Inc Fleet Mechanic - Monday to Friday 2 PM to 10 PM- $28.00 to $32.00 Depending on Experience What We Offer ·Medical, Vision and Dental, Life Benefits ·Life & Supplement Life ·Company Matched 401K retirement plan ·Vacation Time ·Training and Development ·Career Opportunity! ·$1,000.00 Referral Bonus Who We Are: Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous one. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure, and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com. Job Description: Thompson Pipe Group is looking for experienced Fleet/Diesel Maintenance Mechanic. Thompson pipe group manufactures reinforced concrete pipe and ships products directly to contractors. In need of Fleet Mechanics to maintain and repair a fleet of day cabs and OTR trucks. Fleet Mechanic Job Responsibilities: Maintains diesel equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; adjusting and alignments; keeping records. Fleet Mechanic Job Duties: Determines vehicle condition by conducting inspections and diagnostic tests;identifying worn and damaged parts.Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures.Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; adjusting and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units.Verifies vehicle performance by conducting test drives; adjusting controls and systems.Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards.Able to use Microsoft Office suite of programs (Word, Excel, PowerPoint, etc.Maintains vehicle appearance by cleaning & washing.Maintains vehicle records by annotating services and repairs.Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs.Demonstrated ability to maintain a consistent safe work ethicKeeps supplies ready by inventorying stock; placing orders; verifying receipt.Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.Maintains inventory of all operating equipment and spares Fleet Mechanic Skills and Qualifications: Tooling, Supply Management, Mechanical Inspection Tools, Technical Understanding, Attention to Detail, Dependability, Thoroughness, Verbal Communication, Documentation Skills, Inventory Control, Job Knowledge Job Type:Full-time Required education: High school or equivalent Required experience: Mechanic: 5 years Must pass Pre-employment Physical and drug test. Not A Warehouse Job. Precast Concrete Pipes is what we do. Apply Now! We arelocated at5150 Jefferson Chemical Road, Conroe, Texas 77301 Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Reasonableaccommodation may be made to enable individuals with disabilities to perform the essential functions upon request. An Equal Employment Opportunity (EEO) employer that welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or another legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace. EOE/AA – M/F/Vet/Disability #IND123
Full Time
11/14/2024
Houston, TX 77032
(1.8 miles)
POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .
Full Time
12/5/2024
Pasadena, TX 77508
(27.9 miles)
Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Experience with installing mechanical equipment.Experience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O rings.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel, including globally, for extended periods of timeAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: Professional certifications in this field.Experience working with ValuesAbility to work collaboratively with unfamiliar teams.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-12061 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.
Full Time
12/8/2024
Houston, TX 77246
(21.2 miles)
Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time - 15 days of vacation first year.Comprehensive benefits package including 401K, medical, dental, and vision care.Extensive product and on the job/cross training opportunities.Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyProviding Scheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)Check us Out: https://youtu.be/pdZMNrDJviYWhat will you doUnder general direction, acts as the on-site project leader to plan, execute, and complete control systems projects with assigned customers. Performs or delegates tasks as required to execute and fully complete assigned projects including: hardware design, system programming, installation coordination, system and network commissioning and project closeout. Responsible for the overall financial results of assigned projects including: costs, project billings, and collections. Maintains an effective balance between customer satisfaction and project financial results. Actively pursues selling change orders. Coordinates communication with the customer during all phases of the project. Ensures proper execution of warranty. Provides work direction to subcontractors, electrical installers, technicians, designers, and administration as necessary. Ensures work performed is in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics. Adheres and ensures Johnson Controls staff and subcontractors adhere to all safety standards.How will you do itCompletes typical installation hardware design and software programming using established standards as required. Provides detailed information to communicate design and operation to customers, Johnson Controls staff and subcontractors.Actively pursues additional work through change orders. Evaluates the contractual scope of work and the impact of client issued bulletins, field directives and/or scheduling changes. Communicates both technical and business-related issues with the clients.Manages the selection, ordering, budget and delivery schedule of materials to be procured for the projects assigned.Secures pricing and availability from outside vendors and suppliers, mechanical and electrical subcontractors including scope, terms and conditions. May request several bids in pricing process. Oversees subcontractor payment and billing processes.Provides jobsite coordination for panel and field device physical locations. Ensures installation is in accordance with Johnson Controls literature and project requirements.Manages and completes the loading, device verification, and commissioning of all system controllers as required. Validates complete system functionality and resolves issues with subcontractors and others to ensure proper operation. Provides accurate project as-built and commissioning documentation.Manages costs, billings and collections. Completes project billings in a timely and accurate format to the client. Maintains profitability goals and positive cash flow. Schedules monthly project cost in cost accounting system. Responsible for project cost hitting projects as scheduled.Provides coaching, mentoring and technical assistance to System Technicians, Electrical Installers and System Designers. Provides technical assistance to subcontractors. Ensures that delegated tasks are done accurately, on time, billed, within budget and within scope of the contract.Effectively communicates the status of projects to management as required and provides monthly forecasts of revenue, costs, and gross margin.Sends warranty letter to JCI customer upon substantial completion of project and ensures proper execution of warranty.Develops project plans and coordinates the required resources to ensure timely and cost-effective installation and completion of assigned projects.Performs site-specific training for owner/operator on the total system in full or with assistance. Ensures owner/operator has been trained. Provides proper documentation and manuals for system operation.Develops and maintains viable long-term relationships with contractors, clients, consultants and subcontractors. Attends job progress meetings as required.Adheres to safety standards. High degree of regard to employee and subcontractor safety.What we look forRequiredMinimum of a technical Associates Degree with two years of field experience or four years of equivalent related field experience in the HVAC industry.Must have relevant technical hands-on experience in systems design and commissioning of digital HVAC controls systems.Must have the ability to communicate technical material to a non-technical audience.Must demonstrate the ability to perform work independently.PreferredStrong personal computer skills.Must have knowledge of control theory and HVAC systems.Knowledge of project accounting, costing principals and contracting preferred.
Full Time
11/14/2024
Houston, TX 77032
(1.8 miles)
POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .
Full Time
11/12/2024
Pasadena, TX 77508
(27.9 miles)
Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Customer Product Repair Mechanic-First shift position, Overtime required Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. Responsibilities include: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Work on API PumpsAbility to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate Requirements: 5 plus years relevant experienceAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and partsMust be able to work overtime, weekends, and holidays as the business dictates.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Comply with all Flowserve policies and procedures. Preferred Experience / Skills: Ability to understand work instructions, safety procedures, and company policies.Electrical wiring experience or mechanical assembly experienceExcellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.HS Diploma / GED Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11929 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.
Full Time
12/8/2024
Pasadena, TX 77505
(21.8 miles)
Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaidvacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out! :https://youtu.be/pdZMNrDJviYWhat you will doHVAC Mechanical Quotes RepPromote the Johnson Controls value proposition to the owner community by acting as the champion for estimating and quoting Labor & Materials (L&M) and small retrofit technical solutions.Assist with building long term customer relationships/partnerships with owner accounts by partnering with the Sales team. Responsible for customer satisfaction and loyalty while working in conjunction with operations and sales partners. Drives customer satisfaction to aid in cultivating and managing long-term relationships by qualifying and closing quoted opportunities. Utilizes quoting tools to prepare, present and finalize quote opportunities.Provides coaching and training to Technicians and Sales on estimating, selling and using the quote tool for L&M and small retrofits. Seeks to expand the depth and breadth of Johnson Controls offerings sold with owner accounts. Actively participates in all developmental and training activities and programs to gain knowledge of the JCI product and service offering.How you will do it:Responsible for inbound customer quote calls. Generates quotes for Johnson Controls offerings persuasively, persistently and confidently to owner accounts. Manages multiple, ongoing, opportunities by receiving, reviewing and processing quotes to customer’s specifications. Partners with Sales team for quotes that are larger in scope.Demonstrates technical and business expertise by providing information on our products and services and maintains a high level of credibility. Effectively estimates, writes, and presents proposals. Able to go to job sites to identify opportunities, estimate and quote without assistance.Partners with Sales to ensure full understanding of the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably position Johnson Controls.Follows up on all open quotes. Utilizes applicable tools effectively to plan and document quoted opportunities. Manages the high activity of the pipeline with a focus on sales phase, close date, and probability of a close as well as other pertinent pipeline information. Manages to Branch targets for quotes and closure.Provides training and coaching on the use of applicable tools, finance training, sales soft skills training and GM%, fees, etc. to allow the Technicians to finalize and deliver quotes directly to the customer.Partner with Sales on quoting to provide coaching on using the tool so they feel comfortable generating quotes. Build a relationship between the field and Sales organization for future partnering on PSA opportunities and larger retrofit opportunities.Place purchase orders with vendors based on execution needs for quote completion.Assist both internal and external customers on warranty related issues.What we look for:5 (five) years minimum hands on HVAC field mechanical tech experience required. Demonstrates a commitment to integrity and quality in business. Excellent initiative and interpersonal communications skills. Demonstrated ability to influence the market at key levels.Estimating#LI-AR1
Full Time
11/14/2024
Houston, TX 77032
(1.8 miles)
POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .
Full Time
12/8/2024
Pasadena, TX 77505
(21.8 miles)
What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, trouble shooting and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of three (3) years of practical working experience on Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units with strong HVAC/ mechanical troubleshooting experience.Able to repair centrifugal compressors, steam turbines, screw chillers system components.Travel maybe required 10% to 20% to support Branch Customers startup and commissioning activities as well as aftermarket service trouble shooting.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs and JCI’s STA to gain knowledge in HVAC products and sales quoting.You will work collaboratively with other local market mechanics.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license
Full Time
12/8/2024
Pasadena, TX 77505
(21.8 miles)
What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union.Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing.Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors.Able to use vibration equipment to trouble shoot drivelines.Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.You will work with other local market mechanics as well as Servicemen and apprentices.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license
Full Time
12/8/2024
Pasadena, TX 77505
(21.8 miles)
Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiring
Full Time
12/8/2024
Houston, TX 77246
(21.2 miles)
Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Bonus programPaid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doWork Shift: 7:00 to 4:00 with one hour lunch. Dependent on job/customer schedulePerforms assigned system commissioning using Johnson Controls configuration and commissioning tools.Troubleshoots and resolves electrical and control problems. Responds to basic warranty calls.How you will do itLoads system-level controller software. Performs commissioning/sequence verification on system level controllers to end devices (i.e., sensors, actuators, etc.) and completes all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates system components using electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents change and provide information for as built documentation.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look forRequiredDemonstrated technical aptitude.Able to use hand and power tools (i.e., drills, saws, etc.)Computer/BAS programming skills required.Attention to detail. Effective communication and listening skills. Depending on location, the mounting and termination of low voltage devices may have special licensing requirements. Demonstrated knowledge of HVAC systemsAt least 5-7 years of prior BAS programming skills
Full Time
12/8/2024
Houston, TX 77246
(21.2 miles)
Controls Technician Intern – Future Leaders Internship ProgramAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. As a member of the Johnson Controls Future Leaders Internship Program, your valuable skill set, knowledge and passion will help us continue to excel in a dynamic and competitive global environment. Our Top 100 Internship Program is a unique opportunity to put classroom theory into practice while bolstering your resume and professional network. By joining a program that is rooted in community, connection, and memorable experiences, you will have an opportunity to transform your future. #internshipWhat’s in it for you · Join hundreds of interns nation-wide for a summer of learning and fun:o Innovation Challengeo Volunteering opportunitieso Executive Engagemento Development Sessions· Inclusive and diverse environment with in-office and/or hybrid work opportunities· Comprehensive benefits package including 401k, Medical, Dental and Vision care – Available day oneWhat you will do Johnson Controls invites you to apply for an internship located in Houston, Texas. The controls tech intern performs assigned system commissioning using Johnson Controls configuration and commissioning tools, and troubleshoots and resolves basic HVAC mechanical, electrical, and controls problems How you will do it 1. Loads system-level controller software.2. Performs basic commissioning and system diagnostics from system-level controllers to end devices (e.g., sensors, actuators, etc.) and completes all required commissioning documentation.3. Keeps management and informed of job progress and issues.4. Calibrates systems requiring basic electronic test equipment.5. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.6. Documents changes and provides information for as-built documentation.7. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required Qualifications:• Currently enrolled as a full-time student at an accredited U.S. college or university or in a relevant technical school or community college program· Pursuing a degree in Associate of Applied Science (AAS) Degree or equivalent· An effective communicator to all levels of the organization· Must have demonstrated computer skills, including use of Microsoft Excel and PowerPoint· U.S. citizen or legal right to work in the U.S. Preferred Qualifications: · Demonstrates an ability to learn quickly and independently· Strong communication skills (verbal and written) preferred · Strong problem-solving skills · Experience or classes related to HVAC/Controls
Next   ▷
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.