Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

Req ID:448834Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $30.00-34.00!#QA Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

What you'll do:As a (Certified Automotive State Inspector Certified Automotive Emissions & Safety Inspector or Certified Automotive Smog Inspector) you will help drive the continued success of VIOC by providing reliable and impeccable preventive maintenance service. You will act as a trusted advisor to our customers, evaluating their needs and performing maintenance to keep their vehicle serviced and safe on the road.Perform state, smog, safety and/or emissions inspections for our guestsPerform automotive preventive maintenance such as changing oil, checking and refilling other vehicle fluids, replacing filters, and inspecting and replacing lights and wipersMaster products, services, and company knowledgeMaintain a clean, well-organized service center and facilitate a safe and secure working environmentEvaluate customers' needs, working quickly and efficientlyThe perks and benefits we'll provide you*:Competitive weekly pay - $16.50/HourPaid on-the-job training - No previous automotive experience is requiredFlexible work schedule: No late evenings or holidaysPaid time off (PTO), and holiday payCompany provided uniforms and toolsWe promote from within- a commitment we are passionate aboutTuition assistance*Medical, dental, vision, and 401(k) savings plans**Terms and conditions apply, and benefits may differ depending on locationHow you'll succeed:Have a valid certification to perform automotive state, safety, emissions and/or smog inspectionsHave a valid driver's licenseYou are friendly and ready to work as part of a customer-focused teamHave an eagerness to learnYou can occasionally lift up to 50 poundsHave full mobility and the ability to work with your hands above your headCan stand for extended periods of time and climb stairsEnglish fluency in reading, writing, and speakingValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Powell in Houston is currently seeking a Senior Field Service Technician. Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of electrical distribution equipment across the US and Canada. This includes performing installations, preventative maintenance, and corrective maintenance. The ideal candidate thinks critically, can work well in a team setting, and is a problem solver. Field service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified service technicians are provided safety and technical training with full office support. Once qualified, technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, phone compensation, and company expense card.This position does not offer visa sponsorship now or in the future.Essential ResponsibilitiesAdhere to Powell's current safety and quality standardsComplete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing.Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service ManagerMaintain flexible work hours, which will include over time and periodic weekend supportMust be available to travel up to 85% of the year.Comply with Powell standard operating procedures, documentation processes, safety processes and protocols.Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric mannerAble to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects.DC / AC Switchgear and Power Control Room (Electrical Enclosure, Power Control Center) installations, in addition to trouble shooting, testing and repair of the same type of equipment.Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing.Perform regular inspections of any issued vehicle or calibrated equipment/tools.Provide support to services manufacturing group. May consist of construction, installation, wiring and testing.Minimum QualificationsField service technicians are required to have 4 years as a shop and / or field electrical / breaker technician.Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applicationsBasic knowledge of electrical air and surface creepage clearance requirements.Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project.Preferred QualificationsBasic familiarity with contactor and circuit breaker schematics (Preferred).Basic understanding of hi potential testing (Preferred)Basic understanding of low resistance testing (Preferred).Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred).NICET Level 1 certification (Preferred).HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified).NFPA 70E Trained (Preferred / Training can be provided).OSHA 10 / 30 Trained (Preferred / Training can be provided)Skills, Abilities & Other RequirementsDemonstrate basic knowledge in the design and manufacture of bus and structural modification projects.Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory.Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control roomsWorking EnvironmentThe Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows:Medium physical effort (lifting/moving up to 50 pounds)Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time.Work at heights greater than 10'.Work on ladders of all types.Work on scissors and bucket lifts (on occasion).In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment.More InformationThis job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.About UsIn our 70+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated and assembled to customer specifications!Powered by Innovation - Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story, and let us help you write yours. Hard work pays off in all of our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.We are an Affirmative Action and Equal Opportunity Employer/Vet/DisabilityIf you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

What you'll do:As a (Certified Automotive State Inspector Certified Automotive Emissions & Safety Inspector or Certified Automotive Smog Inspector) you will help drive the continued success of VIOC by providing reliable and impeccable preventive maintenance service. You will act as a trusted advisor to our customers, evaluating their needs and performing maintenance to keep their vehicle serviced and safe on the road.Perform state, smog, safety and/or emissions inspections for our guestsPerform automotive preventive maintenance such as changing oil, checking and refilling other vehicle fluids, replacing filters, and inspecting and replacing lights and wipersMaster products, services, and company knowledgeMaintain a clean, well-organized service center and facilitate a safe and secure working environmentEvaluate customers' needs, working quickly and efficientlyThe perks and benefits we'll provide you*:Competitive weekly pay - $16.50/HourPaid on-the-job training - No previous automotive experience is requiredFlexible work schedule: No late evenings or holidaysPaid time off (PTO), and holiday payCompany provided uniforms and toolsWe promote from within- a commitment we are passionate aboutTuition assistance*Medical, dental, vision, and 401(k) savings plans**Terms and conditions apply, and benefits may differ depending on locationHow you'll succeed:Have a valid certification to perform automotive state, safety, emissions and/or smog inspectionsHave a valid driver's licenseYou are friendly and ready to work as part of a customer-focused teamHave an eagerness to learnYou can occasionally lift up to 50 poundsHave full mobility and the ability to work with your hands above your headCan stand for extended periods of time and climb stairsEnglish fluency in reading, writing, and speakingValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

We are looking for Part-Time Night Trash Collectors to join us!
You must have an open bed pickup truck or vehicle with trailer.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training. No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: 
Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer A valid driver's license Current auto insurance in your name for your vehicle Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

Daily Thermetrics, a leader in high-quality manufacturing, is seeking a skilled QA Inspector. This role ensures product safety, reliability, and quality by independently performing inspections using advanced techniques to detect corrosion, defects and other conditions.
The QA Inspector conducts inspections, interprets findings and reports results per company and engineering standards, while effectively communicating with customers, engineering teams, and management.
Production positions may be assigned to either of the following full-time work schedules: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
Job Duties:
Maintain a safe, secure, and healthy work environment. Adhere strictly to QA standards and practices, as well as sales order and engineering requirements. Conduct all assigned QA inspections, testing, and calibration duties. Assist non-certified inspectors or new hires with on-the-job training and guidance. Perform or attain job-required Non-Destructive Testing (NDT) certification as necessary. Carry out inspections for which qualifications or certifications are held. Accurately interpret and report the results of inspections to relevant stakeholders.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. High school diploma or equivalent required Minimum 6 month’s experience in inspections in a manufacturing environment. Ability to work in Microsoft Word and Excel Ability to work with computers / computerized equipment Ability to read, understand, and communicate in English Ability to follow written or verbal, technical instructions Position is based at a manufacturing/fabrication, climate-controlled shop environment. Interaction with other Inspections employees, as well as engineers, supervisors and third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 75 pounds Must be able to walk and stand for majority of eight-hour work day Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop. Ability to maintain focus and multitask effectively Excellent communication skills, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)