Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

RoadSafe is looking for Flaggers to join our team!
Hiring Flaggers that have a valid driver's license. Starting pay is $15 per hour.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Must be able to read and speak English Driver’s license required Pass a drug test High School Diploma or GED Experience in Flagging/Traffic Control is preferred, but we offer training Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Able to layout and fabricate sheet metal parts to customer requirements or aerospace specifications. Works with plans, travelers and specifications on a daily basis. Measures, marks, forms and debur sheet metal. Operates various types of equipment to include saws, cutting machines, computerized equipment, hand and power tools and light metalworking machines - to cut, bend, drill, shape or form the metal in other ways such as: Fitting, joining and fastening the sheet metal parts to construct the final products or installation pieces. Finishing products and checking that they meet quality, safety and other standards and specifications, Repairing and maintaining sheet metal work.
Other Duties: Ability to corroborate work with other sheet metal fabrication technicians. Assists in preparing work schedule, meet time constraints on work and oversees the work product. Participates in production meetings. Keeps team members informed of developments learned on the job. Coordinates with other departments and work centers to meet production goals. Attention to detail, quality and quantity of job progress. Keeps in-progress jobs moving forward to completion. May attend status meetings. Performs various other miscellaneous duties as required.
Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance
Requirements: Sheet Metal Fabrication: 2 years (Preferred) High school diploma or equivalent. Five years of aviation experience in a sheet metal environment. Knowledge of aviation practices and procedures. Blueprint reading and interpretation. Able to multi-task and delegate authority.

Job Duties: Set-up end mill tools, materials and operate CNC Milling Station Haas Milling Stations, Motion Master Router, Diversified Machine Systems, 5 Axis Router Apply appropriate program to the machine. Edit programs as needed to perform proper runs. Perform machine set-up utilizing proper tools. Monitor feeds and speeds inspect completed product against provided drawings and interpret acceptable tolerances. Perform minor maintenance and cleaning of machine equipment. Utilize company job travelers to make parts as described. Assist with building fixtures, tooling and molds as needed. Responsible for assuring quality of machined components. Performs various other miscellaneous duties as required. Applicants must possess a can-do attitude plus the ability to prioritize and juggle multiple tasks on a daily basis. Strong sense of urgency and impeccable follow through is essential. Team oriented and the ability to work independently a must. Clear verbal/written communication skills required.
Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance
Schedule: 8 hour shift Expected hours: 40 per week Exact Compensation: Is Determined Based on Experience.
Shift availability: Day Shift (Required)
Requirements: Machining: 5 years (Preferred) Ability to read blueprints, use various tools of measurement and verify part(s) to drawings. High school diploma with five years background in machine operation. Some computer background helpful but not required.

Overview: Sun Auto Tire & Service operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experieince and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Possess State Inspector License or ability to obtain a State Inspector license within 30 days of hire date Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training.What's in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws. UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.The responsibilities of the role include:Performs setup, programming and operation on a variety of machining equipment.Machining products to tight tolerances.Working independently and as a team to achieve maximum quality.Computing and verifying dimensions to ensure accuracy.Observing all applicable safety practices and immediately reporting any unsafe practices or conditions.Recognizes and understands flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participates in proactive risk analysis of flight/product safety critical parts and processes.Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed.Computes dimensions and tolerances and measures and lays out work pieces.Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance.Adjusts and sets up machine tools for use by machining tool operators.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Education Requirements:High school graduation and completion of a diploma training program at a college or technical school.Technical Requirements:High degree of mechanical aptitude, accuracy and precision.Thorough knowledge of manufacturing, tool design, fabrication methods and processes, metallurgy and heat treating.Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels.Working knowledge of production management computer systems and other related internal control systems.Regularly required to stand for prolonged periods.Completion of a machinist apprenticeship program; or equivalent.Attainment of trade certification.Directly/indirectly related work experience representing continuous learning and required for someone to perform this job competently is one to three years. The requirements for an ideal candidate include:The ability to read and interpret manuals, technical drawings, and blueprints.Proficient in the use of precision measuring instruments and hand tools. The ability to follow both written and verbal instructions.The ability to lift up to 50lbs without assistance.The ability to stand for extended periods of time.Working knowledge of welding, hydraulics, electricity and pneumatics.Ability to read, understand and interpret blueprints.Strong mathematical aptitude.At StandardAero, we offer:A clean, safe, and temperature controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of machines (Mills, Grinders, EDM's, CNC's, etc.).A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organizationStandardAero is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, pregnancy, age, national or ethnic origin, religion, sexual orientation, gender identity or expression, transgender status, genetic information, status as a protected veteran, and basis of disability status or any other federal, state or local protected class.Must meet US Persons requirements per ITAR.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads technicians who install, repair, and maintain HVAC and refrigeration systems for commercial customers. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting himself as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service management experienceTwo years of technical training or a bachelor's degree is preferredAbility to perform advanced-level maintenance and service on HVAC and Refrigeration equipmentSolid working knowledge of Word, Excel, and Outlook and the ability to learn new systemsEPA Universal CertificationValid driver's licenseProblem-solving and conflict management skillsDetail-oriented and highly organized with the ability to handle multiple tasks and assignmentsAbility to generate ideas and create processes to grow the service departmentRead and interpret documents such as safety rules, operating and maintenance instructions, and procedure manualsAbility to work well with management, executive leadership, support staff, and techniciansAbility and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Req ID:436388Address: 11361 S. I-35 San Antonio, TX, 78073Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Fire Alarm Service Technician San Antonio, TX, USA Texas, USAReq #822 Tuesday, June 25, 2024 Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive:Competitive compensationCareer Advancement Opportunities Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industry This position reports to the Fire Alarm Manager or their designated Agent. The Technician will be responsible for providing inspections and service on a variety of fire alarm system devices in a professional and timely manner. The Technician will be expected to meet weekly service and productivity goals. The Technician will work with the Company to obtain local city listing agents. The Technician is also responsible for maintaining a clean, well-organized vehicle and ensuring a safe environment for his/herself, co-workers and customers.Job ResponsibilitiesManage their time to complete the maximum amount of service and inspections while maintaining a high level of quality.Achieve any weekly productivity goals assigned by the Fire Alarm Manager or designated Agent.Learn applicable fire protection codes and obtain applicable state licensing.Protect and maintain company equipment.Work in a safe manner as outlined by company safety procedures including the driving, personal protective equipment, and lockout/tag-out policies.Maintain their vehicle in accordance with company procedures and ensure it is clean and organized.Perform any other tasks assigned by the Fire Alarm Manager or Agent.Job Qualifications:Applicable licensing and certification required by National, State and Local codes.Texas Fire Alarm (FAL) is required.Ability to learn applicable installation, inspection, and servicing codes.Ability to participate in on-call rotation.A strong work ethic and professional appearance.Excellent communications, and customer service skills.Possess a valid driver’s license and driving record that meets company requirements.Preferred QualificationsApplicable experience either in the fire protection industry or the commercial customer service business in some capacity.A fire alarm systems background or a background working as a licensed electrician.Ability and willingness to obtain NICET and other trade specific certifications. Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Other details Pay TypeHourly

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sicktime-15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will doUnder specific direction is responsible for the sale ofJohnson Controlsservice offerings to owners, primarily at the Director level. Promote theJohnson Controlsvalue proposition to building owners by providing technical solutions and operational expertise. Builds and handles long term customerrelationships/partnershipswith target and handled accounts. Responsible for customer satisfaction. Positions renewable service agreements as the foundation of handled account relationships. Implements the sales process to cultivate and handle long-term relationships and seeking out, qualifying and closing new sales opportunities. Obtain and close sales on a monthly basis. Seeks to expand the depth and breadth ofJohnson Controlsofferings within anaccount.How you will do itWith direction from the supervising manager, sells theJohnson Controlsofferings persuasively, persistently and confidently to building owners at the D-level while reaching optimal profit levels.Focuses on improving the existing building to allow the building owner to achieve businessobjectives.Manages ongoing, opportunities particularly focusing on selling services and retrofits.Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing customers.Builds partnering relationships with the owner or owner representatives responsible for the decision-making process to drive the sale ofJohnson Controlsserviceofferings.Actively listens, probes and identifiesconcerns.Understands the customer's business and speaks their language. What we look forRequiredA minimum of six (6) years of progressive field salesexperience.At least one year successfully selling HVAC or building automation system service orprojects.Demonstrates a commitment to integrity and quality inbusiness.Excellent initiative and interpersonal communications skills.#SALESHIRINGJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Mechanic C position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. The Mechanic C is an entry level position with the Hertz Corporation and is the launching point for our maintenance team. In this role you will be performing preventative maintenance, with a focus on Oil and Tire Changes. Must be a quick learner, and have an assortment of tools, including oil filter wrenches, socket set, and a toolbox to keep them in. Wages: $15.00/hr. Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairs 3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Hotel Maintenance Technician SpringHill Suites San Antonio Downtown/Riverwalk, 524 South Saint Mary's Street, San Antonio, Texas, United States of AmericaReq #7264 Tuesday, June 25, 2024 The Hotel Maintenance Technician at the Springhill Suites by Marriott San Antonio Downtown Riverwalk is responsible for assisting with the operation, maintenance, service, and repair of equipment as assigned.ESSENTIAL FUNCTIONSParticipate in the preventative maintenance program.Perform tasks in a safe and efficient manner.Assist with the operation, maintenance, and repair of equipment in guest rooms, public spaces, and hotel facilities.Effectively and professionally communicates with guests, co-workers, and supervisor.Ensures all fire and safety inspections and protocols are completed, and any discrepancies are corrected.Collaborates with vendors and suppliers to discuss scope of, and products and materials used in, repair activities.Obtains pricing and bids or develops cost estimates as needed.Monitors tools, supplies and inventories of maintenance department.Places orders with approved vendors as needed.Maintains working spaces in safe and clean condition.Communicates directly with front desk for guest service request issues, housekeeping for work orders, General Manager for orders and capital expenditure projects. Carry all equipment to be prepared to always carry out work tasks. Perform other tasks/jobs as assigned by the supervisor or manager.Other Duties as assigned.MINIMUM QUALIFICATIONSMust have a positive attitude and willingness to learn. Verbal and written communication skills.Ability to react quickly and calmly in emergency situations. Reasoning abilities are always utilized.Basic maintenance skills required.Proficient in use of hand tools, power tools, test equipment.Must be proficient in Windows operating systems, Company approved spreadsheets and word processing.Must be able to convey information and ideas clearly. Must have a desire to serve all guests. Must be 18 years of age or older to perform this job. PREFERRED QUALIFICATIONSTechnical, Trade or Vocational school degree.Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.).At least 2 years of work-related experienceCarry all equipment (e.g., keys, phones, pager, tools, radio) to maintain preparedness to always carry out work tasks.Experience in a hotel, apartment, or a related field Our CompanyMCR is the3rd-largest hotel owner-operatorin the United States.Founded in 2006, our company has offices in New York City, Dallas, Chicago, and Richmond, Virginia.MCR has a$5.0 billion portfolioof148 premium-branded hotelscontaining more than 22,000 guestrooms across37 states and 106 cities.MCR has more than 7,000 team members across the country and operates hotels under 9 Marriott brands, 8 Hilton brands and a number of unflagged independent hotels.MCR was namedone ofFast Company’s 10 Most Innovative Travel Companies of 2020.MCR is a three-time recipient of theMarriott Partnership Circle Award, the highest honor Marriott presents to its owner and franchise partners, and a recipient of theHilton Legacy Award for Top Performer.For the TWA Hotel at New York’s JFK Airport, MCR won theDevelopment of the Year (Full Service) Award at The Americas Lodging Investment Summit (ALIS), the Urban Land Institute New York Excellence in Hotel Development Award and the American Institute of Architects national Architecture Award, the highest honor given by the AIAWhat we offer/What’s in it for you Hotel Discounts Weekly Pay Paid Time Off Retirement Options Referral bonuses Career advancement & upward mobility Health, Dental, Vision Insurance- available after 30 days of employment for full-time team members Other details Job FamilyHotelsPay TypeHourlyMin Hiring Rate$20.00Max Hiring Rate$20.00

Overview: At Caliber Auto Care, our Purpose is Restoring the Rhythm of Your Life®. We are looking for individuals that have a desire to Do the Right Thing and thrive in a purpose-driven, team-driven culture that supports you to reach your full potential. If this sounds like you, please join us!The Automotive Technicians repair vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Perform mechanical repairs to vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Effectively work with Body Technicians to assist with the repair process. Pay: 27 - 45 Flag Hours, DOE (Competitive Pay Depending on level of and Mechanical Experience and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Essential Job Duties Examines vehicles to determine extend of damage or malfunctions Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices May repair, reline, replace and adjust brake systems and perform vehicle alignments Test and adjust repaired systems to meet manufacturers' performance specifications Repair and/or replace engine components, brake systems, steering and air bag systems Perform other related duties as assigned to ensure an efficient and effective repair Skill/Requirements: Must be at least 18 years of age Must have a valid driver's license and be eligible for coverage under Caliber's insurance policy (Not an excluded driver) Ability to effectively communicate with others Ability to read and understand instructions, written estimates and work orders Multi-tasking; adapts easily to fast-paced environment Personable, friendly demeanor with "World Class" customer service approach to internal and external customers Maintain a well-groomed appearance Physical Requirements/Working Conditions: The position is based in a normal shop environment. Frequent physical activity such as kneeling, bending, squatting, stooping, lifting above shoulders, standing for long periods of time during the repair of a vehicle is a part of daily activity as well as repetitive tasks involving hand and arm motion and lifting objects over 50 pounds. Must be able to push/pull parts carts and cars with assistance. The working environment consists of: Exposure to fumes, chemicals, dust, along with high levels of noise as well as regularly exposed to working near moving mechanical parts. Caliber enforces the mandatory requirement to wear protective equipment. Must have manual dexterity to operate equipment. Subject to weather conditions both inside and outside.Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

JOB OPENING JOURNEYMAN ELECTRICIAN WHAT WE PROVIDE: This is a year-round position at Six Flags Fiesta Texas, in San Antonio, TX. It features a competitive minimum hourly rate of$28 per hour or morebased on experience, with a generous benefits package, which includes Medical, Dental, Vision, Time Off (Vacation, Sick, and Jury Duty), 401k with matching and a minimum average of 30+ hours per week offered and expected on a year-round basis with flexible scheduling. Additionally, earn an extra $1 per houron all shifts after 5pm and earn anextra $5 per houron all Saturday and Sunday shifts. We also offer a$500-$1000annual tool reimbursement program,$200annual boot reimbursement,FREEuniforms with laundry service,Weekly Pay, nationwideFREEpark access and parking for yourself and a guest, season passes for family, annual complimentary park tickets for friends and family, Employee Stock Purchase Plan,40%offof food and merchandise, access to exclusive employee only events and more! WHAT YOU WILL DO: As a Six Flags Electrician you will spend the day conducting day-to-day maintenance of all electrical systems throughout the park and responding to calls as needed, to ensure a safe and vibrant experience for all guests and employees. HOW YOU WILL DO IT: Performing daily inspections of assigned rides and attractions.Performing rehab work on theme park rides and attractions.Completing work orders and electrical installations.Troubleshooting ride control systems.Maintain and repair pump controls, alarm systems, laundry, and food beverage equipment.Maintain emergency generator systems.Maintain Energy Management system.Maintaining a clean and safe work environment.Performing any other duties as required by Maintenance Leadership and Management. WHAT YOU WILL NEED: Valid Journeyman Electrician License with 5 years minimum experience in electrical maintenanceMust be at least 21 years of ageHigh School Diploma or valid GEDMust have a valid State Driver License and a State Electrician LicenseAbility to work varied shifts, nights, weekends, holidays and available for overtime as neededAbility to work in all-weather elements such as sun, heat, cold, rain and various heightsStrong understanding of electric control systems and devices and fundamental electronic principlesAbility to uphold Guest First Standards as set forth by company policy.Demonstrable communication skills in English (reading, writing, and speaking), and ability to keep accurate written records. OTHER NOTES: All other duties assigned or necessary to support the park as a whole.Reports to the department Maintenance Supervisor. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. This a year round hourly position at the Six Flags Fiesta Texas, in San Antonio, TX. It features a competitive salary and a generous benefits package. Interested Candidates should apply online at SixFlags.com/Jobs Six Flags is a Smoke and Drug Free Equal Opportunity Employer

Job Description:We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectWhy Join Core-Mark Core-Mark emphasizes personal growth and development for all associates. We believe that when you succeed, the company succeeds. We promote internally whenever possible and provide frequent training opportunities in several formats to help you meet your personal and career goals.Pay: $22 - $28/hrShift: Monday - Friday; 10am - 6:30pmPosition Summary:Performs and/or assists the Manager / Supervisor, Facilities with the maintenance, repair, replacement, adjustments and modification of the facility, equipment and the outside grounds according to a set schedule and in emergency and non- emergency situations while observing all safety regulations and ensuring all quality standards are met while maintaining the efficient flow of product through the production process. Functions as a team member within the department and organization, as required, and perform any duties assigned to best serve the company.Position Responsibilities:Review work schedule, perform safety check on equipment, obtain supplies required to perform the work and prepare for operations.Perform building and grounds maintenance and general upkeep duties as needed.Assist Facilities Manager and other personnel with installations, modifications, adjustments and replacements of tools equipment and any other maintenance projects as assigned.Maintain warehouse, operate power equipment to sweep, wash warehouse floors, aisles, clean-up spills, remove trash and debris.Perform scheduled custodial duties, paint, scrape, power wash and other projects as assigned, fill and maintain the cardboard baler.Perform light maintenance (e.g., change light bulbs, unstop toilets, clean carpets, duct work, set-up conference rooms, etc) as needed.Assist warehouse personnel, outside contractors and maintenance personnel on special maintenance projects as directed.At end of shift, secure all equipment, perform general housekeeping duties and complete all required paperwork.Perform PMs on all equipment to include but not limited to, Conveyor/Powered Industrial Trucks/Specialized Equipment. Ability to make repairs as needed.Responsible for completing Work OrdersMaintenance recap reports accurate and submitted daily to ManagementCommunicate with vendors and provide quotes for management reviewPerforms other related duties as assigned.#CM-ALLQualification:High School Diploma or Equivalent Knowledge of conveyor systems and belt repair (lacing) Knowledge of PLC’s, photo eye sensors and 3 phase motorsKnowledge of evaporators and condenser units for cooler and freezer Experience with Lock Out Tag Out proceduresExperience working with vendors obtaining quotes and reviewing work performedMust be flexible with On-call schedule every other Sunday.Company descriptionCore-Mark, a Performance Food Group Company, is part of a Fortune 150 company that continues to grow as an industry leader in fresh and broad-line solutions to the convenience retail industry. Our reputation of empowering customers, employees, and communities has allowed us to build over $23 Billion in revenue. Through our distribution centers, we offer a full range of products, programs, and solutions to customers across the U.S. and Canada.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Service TechnicianAre you a problem-solver who loves to be out in the field Our Appliance Techs provide mechanical repairs to washers and dryers at customer and client locations within their assigned region. Appliance Technicians keep our machines running smoothly to meet customer expectations or the need for repeated service needs. The ideal candidate is someone who enjoys working independently and has a very strong mechanical aptitude.Key Responsibilities:Service and Repair: Perform diagnosis, troubleshooting, and repair of appliances such as washing machines, dryers, and air-vending machines. Ensure that all repairs are carried out efficiently and in accordance with manufacturer guidelines and safety standards.Maintenance: Conduct routine maintenance and preventative services on appliances to ensure optimal performance and extend their lifespan. This includes cleaning, lubricating, replacing worn-out parts, and adjusting settings as necessary.Customer Service: Interact with customers in a professional and friendly manner, addressing their concerns and providing accurate information regarding the repair or maintenance process. Offer advice and recommendations on appliance usage, care, and maintenance to prevent future issues.Documentation: Maintain detailed records of service calls, repairs performed, parts used, and any other relevant information. Prepare service reports and update the internal database with accurate and up-to-date information.Parts and Inventory Management: Monitor and manage inventory levels of spare parts and tools. Order necessary parts and equipment to ensure the availability of required resources for efficient repairs and maintenance.Safety Compliance: Adhere to all safety protocols and guidelines while working with electrical systems and appliances. Ensure personal safety and the safety of customers' property during service calls. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Valid Driver's LicenseAbility to pass pre-employment screeningPrevious experience in appliance repair or a related field is preferred.Good interpersonal and communication skills to interact with customers effectively.Ability to work independently and manage time efficiently.Physical stamina and dexterity to handle and maneuver heavy appliances.Basic computer skills for documentation and communication purposes.Must be able to lift up to 75 pounds and will frequently work in a variety of environmental conditions (both weather and non-weather related)Visit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training.What's in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws. UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow PAY $30-45 HR SIGN ON BONUS UP TO $3,000 Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration Technician Active EPA Certification Valid driver's license Excellent customer relations and interpersonal skills Mechanical aptitude and troubleshooting skills Ability to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Additional Job DescriptionWhat you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired· Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.· Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.· Computer savvy with good verbal and written communication skills.Preferred· Five (5) years of Commercial and or industrial work experience in the HVAC industry· Refrigeration Certification preferred.· EPA Universal Refrigerant CertificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

**SkillBridge Candidates Only**Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. At our new San Antonio Training Center, you will be trained by the world's best. Bring your mechanical aptitude, a strong work-ethic, and a hunger for learning - we'll teach you the rest.What's it like at StandardAeroCollaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on.Our Turbine Engine Mechanic Training Program is a 12 week comprehensive paid training program that provides format, structure and standards for employee training & development. We have a 'learn-by-doing' philosophy so you will be frequently moving between theory, lab and instructor led practical on-engine training.Upon completion of the program, you will be assigned to one of our engine programs in San Antonio.What you'll learn:Repair and overhaul of gas turbine engines Inspection of engine modules and engine components Safety practices and aviation regulations Requirements for the ideal candidate include:High School Diploma or equivalent education. Minimum of 2 years job related training/experience is preferred. Ability to read, write, and communicate verbally in English.Ability to read and interpret manuals, technical drawings, and blueprints to determine proper operating conditions. Ability to lift up to 50lbs without assistance.Ability to stand for extended periods of time.Ability to multitask and prioritize tasks in a high pace environment.SkillBridge Specific Information: This is an unpaid fellowship through the Department of Defense (DoD) SkillBridge Program. The fellow selected for this role will not receive compensation or benefits from StandardAero and will not be an employee, agent, or contractor of StandardAero but rather will remain an employee of the DoD and will receive compensation and benefits through the DoD.DoD SkillBridge Eligibility Requirements: Has served at least 180 days on active dutyCan participate within the last 6 months of separation or retirementWill receive an honorable dischargeHas taken any service TAP/TGPSHas attended or participated in an ethics brief within the last 12 monthsReceived Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of the fellowship.What makes a good fit for StandardAeroWe love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture.Raising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

Chief Hotel Maintenance Technician TownePlace Suites San Antonio, 5014 Prue Road, San Antonio, Texas, United States of AmericaReq #7011 Monday, June 10, 2024 The Chief Engineer at TownePlace Suites by Marriott San Antonio Northwest is responsible for ensuring proper operations, maintenance, service, and repair of all equipment.ESSENTIAL FUNCTIONSEnsure that the Preventative Maintenance program is implemented and administered according to MCR standards.Evaluate and spot check the work of all staff and contractors or outside laborers.Handle guestroom maintenance requests in a timely manner.Maintain files of and be familiar with all operational manuals and warranty agreements for equipment.Immediately follow up on any alarms to determine the exact location and cause; determine emergency status and report to Guest Services and/or the General Manager with findings.Manage energy expenses and continually work towards energy conservation.Ensure that pool and spa follow area health codes.Maintain a key control system and ensure it is adhered to.Always comply with MCR standards and regulations to encourage safe and efficient hotel operations.Train and supervise the Engineering staff and coordinate all scheduling.Respond to emergency situations using information contained in Material Safety Data sheets.Keep Material Safety Data sheets current and easily available (with Housekeeping Manager).Coordinate all inspections of the fire safety systems, including extinguishers, smoke alarms, etc., to maintain proper safety standards.Approach all encounters with guests and employees in an attentive, friendly, courteous, and service oriented manner.Other duties as assigned. MINIMUM QUALIFICATIONSMust have a positive attitude and willingness to learn. Verbal and written communication skills.Ability to react quickly and calmly in emergency situations. Reasoning abilities are always utilized.Basic maintenance skills required.Proficient in use of hand tools, power tools, test equipment.Valid driver’s license and an acceptable Motor Vehicle Driving Record (property specific).Must be proficient in Windows operating systems, Company approved spreadsheets and word processing. Must be able to convey information and ideas clearly. Must have a desire to serve all guests. Must be 18 years of age or older to perform this job. PREFERRED QUALIFICATIONSTechnical, Trade or Vocational school degree.Licensed in a trade preferred (plumbing, electrical, HVAC, carpentry, etc.).2 years of work-related experienceCarry all equipment (e.g., keys, phones, pager, tools, radio) to maintain preparedness to always carry out work tasks. Experience in a hotel, apartment, or a related field Our CompanyMCR is the3rd-largest hotel owner-operatorin the United States.Founded in 2006, our company has offices in New York City, Dallas, Chicago, and Richmond, Virginia.MCR has a$5.0 billion portfolioof148 premium-branded hotelscontaining more than 22,000 guestrooms across37 states and 106 cities.MCR has more than 7,000 team members across the country and operates hotels under 9 Marriott brands, 8 Hilton brands and a number of unflagged independent hotels.MCR was namedone ofFast Company’s 10 Most Innovative Travel Companies of 2020.MCR is a three-time recipient of theMarriott Partnership Circle Award, the highest honor Marriott presents to its owner and franchise partners, and a recipient of theHilton Legacy Award for Top Performer.For the TWA Hotel at New York’s JFK Airport, MCR won theDevelopment of the Year (Full Service) Award at The Americas Lodging Investment Summit (ALIS), the Urban Land Institute New York Excellence in Hotel Development Award and the American Institute of Architects national Architecture Award, the highest honor given by the AIAWhat we offer/What’s in it for you Hotel Discounts Weekly Pay Paid Time Off Retirement Options Referral bonuses Career advancement & upward mobility Health, Dental, Vision Insurance- available after 30 days of employment for full-time team members Other details Job FamilyHotelsPay TypeHourlyMin Hiring Rate$22.00Max Hiring Rate$24.00Job Start DateMonday, June 10, 2024

Overview: At Caliber Auto Care, our Purpose is Restoring the Rhythm of Your Life®. We are looking for individuals that have a desire to Do the Right Thing and thrive in a purpose-driven, team-driven culture that supports you to reach your full potential. If this sounds like you, please join us!The Automotive Technicians repair vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Perform mechanical repairs to vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Effectively work with Body Technicians to assist with the repair process. Pay: 27 - 45 Flag Hours, DOE (Competitive Pay Depending on level of and Mechanical Experience and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Essential Job Duties Examines vehicles to determine extend of damage or malfunctions Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices May repair, reline, replace and adjust brake systems and perform vehicle alignments Test and adjust repaired systems to meet manufacturers' performance specifications Repair and/or replace engine components, brake systems, steering and air bag systems Perform other related duties as assigned to ensure an efficient and effective repair Skill/Requirements: Must be at least 18 years of age Must have a valid driver's license and be eligible for coverage under Caliber's insurance policy (Not an excluded driver) Ability to effectively communicate with others Ability to read and understand instructions, written estimates and work orders Multi-tasking; adapts easily to fast-paced environment Personable, friendly demeanor with "World Class" customer service approach to internal and external customers Maintain a well-groomed appearance Physical Requirements/Working Conditions: The position is based in a normal shop environment. Frequent physical activity such as kneeling, bending, squatting, stooping, lifting above shoulders, standing for long periods of time during the repair of a vehicle is a part of daily activity as well as repetitive tasks involving hand and arm motion and lifting objects over 50 pounds. Must be able to push/pull parts carts and cars with assistance. The working environment consists of: Exposure to fumes, chemicals, dust, along with high levels of noise as well as regularly exposed to working near moving mechanical parts. Caliber enforces the mandatory requirement to wear protective equipment. Must have manual dexterity to operate equipment. Subject to weather conditions both inside and outside.Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Overview: Are you looking to have a successful automotive career at Sun Auto Tire & Service We are looking for General Service Technicians to join our team. We are a growing company and if you come ready to give it your all, your hard work will pay off. We are looking for good people that we can grow with us.As a General Service Technician, you will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. Pay: $15 - $17/HR, DOE Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Qualifications : High School Diploma or equivalent Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Ability to work a minimum of five days, including Saturday's Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training.What's in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws. UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Pay from $35 - $50/hour DOE Sign on bonus up to $3,000 DOE Responsibilities: Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: Minimum of 5 years of commercial refrigeration experience is required. High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:· Competitive Starting Pay· Paid Training· Global Advancement Opportunities· Company Vehicle (as applicable)· Referral Bonuses· Comprehensive Benefits· Medical/Dental/Vision insurance· Health Savings Account (HSA)· Life Insurance· 401(k) savings plan with company match· Short-Term and Long-Term Disability· Employee Assistance Program· Wellness Program· And more!SIGN ON BONUS OFFERED TO QUALIFIED CANDIDATEWhat you will do Perform service and repairs on Portable Fire Extinguishers, Kitchen Hood Systems & Suppression Gas Systems in addition to other related building system products at customer sites. Service, troubleshoot and install many different manufacturers including Simplex and ANSUL. Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational product manuals. Manage daily service call, customer activity and program system products. You will work with clean agent systems, dry chemical systems, and special hazards.How you will do it Assist customers with all questions and concerns in a timely and professional manner. Participation in an on-call rotation for Emergency Service. Performs inspections of Suppression Gas Systems based on contract requirements.Inspect customer systemsUse of Smart Phone and EquipmentMay include government workWhat we look for Required FEL-ALicense and Fire Alarm License to inspect Suppression SystemsExcellent communication and organizational skills Outstanding Customer facing service and problem-solving skills PC Skills including Microsoft Windows, Excel, Word, and Outlook Able to inspect special gas systems, FM 200, Sapphire, CO2, high pressure and low pressureValid US driver’s license Preferred Any Manufacturer certifications is a plus; ANSUL, Kiddie PyroChem Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19984BR Pay Class: Hourly Hourly Pay Rate: 23.64 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Night ShiftPlant Maintenance Mechanic for our Servtex quarry located in New Braunfels, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent requiredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentWeld and torch certification a plusMSHA Part 48 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training.What's in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws. UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.