Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are looking for Invisible Fence Installers to join our team!
We offer PAID training, hourly pay, and Commissions on Sales at 8.5 percent!
Installs and services Invisible Fence® Brand Pet Solutions at customer’s homes using basic machinery, working with and training customers and pets, while following all company standards and procedures.
Install and Service assigned Invisible Fence® Brand Pet Containment Systems Effectively train Pets and Pet Owner how to use Invisible Fence® Brand solutions Maintain in good working order and cleanliness of all company vehicles and equipment assigned to Field Technician and report to General Manager any issue that requires additional maintenance Maintain Accurate Records Throughout the Install, Service and Train Process while adding install notes and multi-task between other systems, all accessible through a company provided smart phone
Schedule: Must be available to service the customer and take appointments between the hours of 8:00am - 6:00pm, Monday - Saturday, with last appointment availability starting at 6:00pm on a rotating schedule, 5 day work week including weekends if your rotation shift falls on a weekend. Must be available to work 2-3 Saturdays per month (50% Saturdays per month).
Benefits: Hourly Plus Commissions on Sales At 8.5% PLUS Paid Training! Yearly Merit Increases and Growth Opportunities! Company Provided Tools and Materials including Corporate Cell Phone Company Vehicle and Fuel Card Provided Full Benefits Package (Health, Dental, Vision), Eligible on your 31st day 401K plan with a 5% Match, Fully Vested after 6 months of employment Free Products up to $600 plus Discounts with Corporate Partners and $200 Pet Adoption Reimbursement 26 Paid Days Off, totaling 3 weeks and 1 day of PTO plus 11 Paid Holidays $5,250 Tuition Reimbursement Invisible Fence® Brand Swag!
Qualifications: High school diploma or equivalent 1 Year of Customer Service Experience Valid driver’s license, clear driving record and driving skills. Excellent Communication Skills Installation/Field Service Technician Experience Preferred, but Willing to Train the Right Candidate Flexible Schedule with availability between the hours of 8am-7pm, every other Saturdays and once per week, early team meeting to discuss weekly goals and get to know your team better. Enjoy Working as Part of a Team and Independently Must enjoy Driving, Drive Times May Be Long Enjoy Working for a Company that Truly Gives Back to The Community
We are an Equal Employment Opportunity Employer

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

Description ntroductionDo you want to be appreciated daily Our nurses are celebrated for being on the front line, empathetic for patients. At Methodist Hospital Stone Oak our nurses set us apart from any other healthcare provider. We are seeking a(an) Clinical Nurse Coordinator CNC Med Surg Oncology to join our healthcare family.BenefitsMethodist Hospital Stone Oak, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.At Methodist Hospital Stone Oak, our nurses play a vital part. We know that every nurse’s path and purpose is unique. Do you want to create your own personal career path in nursing HCA Healthcare is your career destination! Our scale makes it possible for nurses to create the career path that fits their life – for life – and empowers their passion for patient care. Apply today for our Clinical Nurse Coordinator CNC Med Surg Oncology opportunity.Job Summary and QualificationsThe Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.What you will do in this role:Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.Supports a patient-first philosophy and engages in service recovery when necessary.Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives. Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:Basic Cardiac Life Support must be obtained within 30 days of employment start dateRegistered NurseBachelors Degree, or Registered Nurse Diploma, or Associate DegreeOur Oncology unit offers the following.You will care for Med/Surg as well as Oncology patients that are receiving active chemotherapy treatments. Cancer patients.Nurse to patient ratio is 1:5 to 1:6.There are 27 beds.You will have the ability to help you become a CNC, ICU, ER, OR, PACU, or Interventional Radiology RN.20 to 25% of the patients are receiving chemo therapy.Room for growth.A lot of great training and mentorship.Team work is excellent. Family oriented.Will get great experience to help you grow as a nurse. Great place to learn time management.Methodist Hospital Stone Oak is equipped with the most modern technology available. With over 280 beds, services include emergency care, general surgery, obstetrics and gynecology, neonatology, oncology, neurosurgery, orthopedics, and acute rehab services.Methodist Hospital Stone Oak is accredited by the Joint Commission as a Primary Stroke Center and Chest Pain Center. The stroke rehabilitation program has received the Joint Commission's Gold Seal of Approval® for Disease-Specific Care Certification of Stroke Rehabilitation. We belong to the Texas Institute for Robotic Surgery. Our surgeons and technology offer minimally invasive options to patients. Surgeons from around the country come to train under our world class team. The hospital has been recognized by Leapfrog’s Hospital Safety Grade A and by Modern Healthcare as one of the Top 100 Best Places to Work in Healthcare. We have also been recognized as a Joint Commission Top Performer on Key Quality Measures®. Finally, by Medicare.gov as #1 in San Antonio and #6 in the entire nation. The hospital is 1 of only 102 hospitals to receive Medicare.gov’s 5-star rating. Join our team to be part of the innovation."The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.HCA Healthcare Co-FounderJoin a family that cares about every stage in your career! We are interviewing candidates for our Clinical Nurse Coordinator CNC Med Surg Oncology opening.Apply today and a member of our Talent Acquisition team will reach out.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Description IntroductionAre you looking for a place to deliver excellent care patients deserve At Methodist Hospital we support our colleagues in their positions. Join our Team as a(an) Clinical Nurse Coordinator CNC Gen Special Surgery and access programs to assist with every stage of your career.BenefitsMethodist Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.Are you a continuous learner With more than 94,000 nurses throughout HCA Healthcare, we are one of the largest employers of nurses in the United States. Education is key to excellence! As a majority owner of Galen College of Nursing, which joins Research College of Nursing and Mercy School of Nursing as educational facilities within the HCA Healthcare family, we make it easier and more affordable to gain certifications and job skills. Apply today for our Clinical Nurse Coordinator CNC Gen Special Surgery opening and continue to learn!Job Summary and Qualifications"The Clinical Nurse Coordinator (CNC) delivers high quality, patient-centered care and coordinates all functions in the unit. In partnership with the management team, the CNC monitors and evaluates nursing care in accordance with established policies. The CNC serves as a resource for staff and supports an unparalleled patient experience.What you will do in this role:Partner with a multidisciplinary team to coordinate, evaluate, customize, and deliver high quality, patient-centered care.Assist with admission and discharge processes.Partner with subject matter experts and leadership team to support improved outcomes and service.Provide coaching, feedback, and training to improve performance and engagement.Assist with staff scheduling.What qualifications you will need:Basic Cardiac Life Support must be obtained within 30 days of employment start dateRegistered NurseRegistered Nurse Diploma, or Bachelors Degree, or Associate DegreeOur Specialty Surgical Progressive Care Unit offers the following:32bedunitPatient-to-nurse Ratio is 1:4/5( with PCT support)Caring for a wide variety of post-surgical patients, some example are:Tracheal Esophageal SurgeriesColorectal SurgeriesTracheostomyLaryngectomyThyroidectomyBreast SurgeryLung SurgeryComplex abdominal related proceduresUrologyWoundvacsTele capableunitDedicated Educationunitwhere nursing students are routinely present completing clinicalsHighly motivated and high performing floorThis floor prides itself on maintaining some of the highest scores for patient and employee satisfaction across the division.Thisunitwas recognized in 2019 and 2021 as an HCAUnitof Distinction in the PCU categoryMethodist Hospital opened in 1963 as the first hospital in the now internationally acclaimed South Texas Medical Center. With over 900 beds, Methodist Hospital offers a broad range of specialties including cardiology, oncology, bone marrow transplants, emergency medicine, neurosciences, maternity care, gynecology and orthopedics. We are proud to be the largest provider of the lifesaving ECMO Program in San Antonio, are home to the largest robotics program in the world, and our Adult Blood Cancer and Stem Cell Transplant unit has become the first program to receive FACT Accreditation in North America. As the flagship hospital, and most comprehensive medical care facility of Methodist Healthcare, we appreciate the support and recognition we receive from the community. We’ve recently been named the No.1 Best Regional Hospital by the U.S. News and World Report for 2019-20. We pride ourselves on providing the highest quality of care possible for our patients, which is proven by our consecutive Grade A Leapfrog Hospital Safety scores. In addition, Methodist Hospital not only received a Primary Stroke Center designation from The Joint Commission, but has also received a Comprehensive Stroke Center Certification from DNV GL Healthcare, designating the facility as offering the most advanced stroke treatment available in a given geographic area. For more information, please visit our website at www.sahealth.com and select Methodist Hospital under Locations. "Good people beget good people."- Dr. Thomas Frist, Sr.HCA Healthcare Co-Founder If growth and continued learning is important to you, we encourage you to apply for our Clinical Nurse Coordinator CNC Gen Special Surgery opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today!We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Ready to build a career with a company that’s leading the foodservice industry Location: Buda, TX Current schedule Monday- Friday occasional Saturdays daytime schedule. We help YOU make it!Benefits Day One!Medical, dental, vision, 401k, life insurance, strong safety culture, excellent local leadership, and much more! BASIC PURPOSEResponsible for upkeep and maintenance of warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, batteries, etc). This keeps day and night warehouse operations functional to ensure efficient shipping and receiving of product.ESSENTIAL DUTIES AND RESPONSIBILITIES:Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations.Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy.Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy.Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.)Maintain and secure the battery-charging area, batteries and other equipment contained therein.Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area.If authorized, may purchase tools and other equipment needs from local vendors to perform required duties.Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.)RELATIONSHIPSInternal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnelExternal: Outside vendorsQUALIFICATIONSEducation/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred.Related Experience: A minimum of six months previous mechanic experience required.Knowledge/Skills/Abilities:Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervision.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $32.00 and $37.00. As applicable, this role will alsoreceive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

SUMMARY: Provides assistance to Manufacturing Engineers, Design Engineering, and production departments. Reviews processes and procedures to determine predictability of new builds and improvements on existing builds including prototyping, repairing machinery, and trouble shooting fixtures/tooling.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in prototype development by debugging, modifications, assembly, testing and inspecting.Detects failures and makes recommendations to Manufacturing Engineers and Design Engineers to make parts producible.Reviews customer drawings and evaluates feasibility, and dismantles, repairs, or sends off defective equipment.Perform, aide, or give direction on periodic preventive maintenance or general repair on equipment or machinery.Programs machinery and equipment such as programmable controllers, electrical testers, and marking equipment.Reviews documentation such as manufacturing procedures, BOMS, drawings and routers.Operates computer terminal to input and retrieve data and create or update documentation.Provides specialized training to production employees and technical direction to production trainer.Provides assistance to Engineers to adapt existing design to perform correctly in new design requirement. KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),Six months to three years related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to speak effectively before groups of employees of organization.Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common factions and decimals.Ability to compute rate, ratio and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Strong working knowledge of computer, equipment and procedures.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 286 rates.Comprehensive benefits package provided by the UA Local 286.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doWe are looking for a skilled journeyman mechanic who has experience with HVAC comfort cooling, air-cooled and water-cooled systems in the industrial market.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.

HPC Industrial,powered by Clean Harbors, based inDeer Park, TXis looking for Class B CDL / Manual Transmission Driversin the Austin, TXarea to be a part of their safety consciousTravelingteam! TheCDL Driver / Equipment Operatoris responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew member and completes turnarounds with management oversight at client’s site in accordance with client and business requirements and company policies, practices, and procedures.Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. TWIC card is required! 100% travel. No restrictions must drive manual transmission. Why work for HPC-Industrial Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsAct as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions.Hands-on operation vacuum equipment and hydro blasting equipment.Operation of special equipment, such as Ultra High-Pressure pumps.Operate equipment by energizing the pumping equipment and/or any specialized hydro blasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job.May be required to examine surface cleaned to ensure conformance to company and customer specifications.Perform routine maintenance on company equipment being used on the job.Perform any and all duties associated with liquid vacs, air machines and jet rodders.May direct a crew of vacuum technicians.May transport equipment and personnel to and from customer locations.Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements.Loading and unloading hoses.Unload vacuum truck at the dump site.Provide general maintenance in the field.Perform other related duties as assigned.High school diploma/GED or equivalent experience.Minimum of 1 year driving experience.Class B CDL License required. 8 or 10 speed experience.Must be licensed to drive a Manual Transmission vehicle. No restrictions.Ability to travel up to 100% of the year.Vac truck operations experience preferred.HAZMAT and Tanker Endorsements required.TWIC card is required.About HPC-IndustrialHPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors.HPC-Industrialoffers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees.HPC-Industrial is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.HPC-Industrial is a Military & Veteran friendly company.*HPC

Description Brinks Home is a leader in the smart security industry, protecting over one million people across the U.S., Canada, and Puerto Rico. Our platinum-grade protection is backed by award-winning customer service and expertly trained professionals. We strive for the highest standards for our customers while fostering a positive work environment for our employees. We create a culture that fosters innovation, celebrates creativity, and encourages authenticity. Join us and be part of a collaborative team that is relentless in our pursuit of security for life.Position Overview:We are currently seeking a determined Alarm Service Technician who embodies our core values: Service, Accountability, Customer Focus, Growth, and Integrity. The Alarm Service Technician is a hands-on role. You will play an integral role in building and maintaining customer relationships. This role entails visiting customer sites throughout the workday installing, servicing, and inspecting low-voltage electronic security equipment.Key Responsibilities:Experience with Alarm panels such as: 2GIG,Qolsys,Ademco, GE, DSC, DMP, and others.Ability to troubleshoot technical problems.Replace system components as assigned; panels, peripheral devices, audible/visual alarms, etc.Driving to customer homes to perform service. Occasional lifting, carrying (up to 30 pounds), pushing and/or pulling; some climbing and balancing; frequent stops, kneeling, crouching and/or crawling.Diagnose causes of problems or failures in systems for the purpose of identifying equipment and systems repair.Customer education and training including a system demonstration.Conduct a thorough walkthrough / site evaluation with the customer to review work order to make sure the system meets their needs and expectations.Install and test the operations of all equipment to ensure proper functionality and signal verification required to establish service.Identify opportunities to improve the use and functionality of the customers system and provide those recommendations.Maintain safety practices to prevent against injury and damage to property.Maintain a clean and organized workspace / job site, ensuring customers satisfaction after theinteraction.Requirements:H.S. Diploma or GEDGood driving record and Valid driver’s license.Excellent customer service skills.Working knowledge of how an alarm system operates.Must be ok with climbing ladders and working at heights.Must be ok working in tight spaces such as crawlspaces,atticsand basements.Low-voltage license or alarm installation certificationNICET IBenefits:Brinks Home recognizes the value of benefits for you and your family, so we offer a comprehensive and competitive benefits program:Medical, Dental, Vision, 401(k) with Employer Match, Paid Time Off & Paid Holidays, HSA/FSA, Life & AD&D Insurance, Disability Coverage, Maternity/Parental Leave, Mental & Physical Health Benefits, Employee Resource Groups, Volunteer Hours, Discounted Equipment & Monitoring, Employee Referral Program, and Continuing EducationTo learn more about our company culture and career opportunities, please visit our LinkedIn and Career Page.Brinks Home provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#equalopportunityemployer #veteranfriendly

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidaterequires strong electrical background and must pass electrical assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.44 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary Paid vacation/holidays/sicktime- 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!: https://youtu.be/pdZMNrDJviYWhat you will doThe HVAC & Fire Site Superintendent is part of our Building Solutions North America business at Johnson Controls. Will lead large, complex construction projects on site for our customers that are $1M or greater.Under general supervision, oversees total construction effort to ensure project is constructed in accordance with scope, budget and schedule. Supervises site activities for JCI resources with a group of subcontractors on large projects of $1M in cost or greater. Coordinates JCI work with other site contractors to ensure compliance with terms and conditions for the project assigned.How you will do itWorks with the project team to identify project objectives with alignment to the scope, budget and schedule. Ensures Quality Control and scope of work compliance through daily site inspections. Submits regular progress updates for incorporation into master plan/schedule to provide variance analysis reporting. Acts as Project Safety program coordinator. Coordinates with the Systems and Services Teams for allocating resources to meet the project objectives. Resolves site conflicts regarding the sequencing of work and unforeseen conditions. Coordinates facility access and ensures appropriate site-working environments. Works with Project Manager in managing risks and assists in establishing project recovery plans. Ensures recovery plans are carried out. Ensures project document controls are in compliance with contract requirements and Construction Management Standards. Develops and maintains viable long-term relationships with customers, prime contractors and subcontractors. Ensures subcontractors readily understand expectations of the project.What we look forRequiredBachelor's/Associate's degree preferred with 7 to 10 years of direct project coordination and supervision experience in Commercial and/or Industrial Building Construction Industry with HVAC & FIRE experience.Proficient in project management processes and procedures.Demonstrated excellence in coordination skills and the ability to supervise project activities on large projects of $1M in cost or greater, including experience in dealing with a large and diverse number of simultaneous challenges often requiring knowledge of many different disciplines.High-level competence in written and verbal communication at various levels.Able to travel up to 100% local travel mainly. This will vary on project assignment. Projects may exist outside of geographical assigned Area.Strong Personal Computer working capabilities in MS Office (excel, word, power point), Adobe Writer, Visio and basic Windows environment.

SUMMARY: Inspects incoming materials and/or finished products for conformance to specifications.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Selects inspection samples according to predetermined methods.Reads and interprets specifications, drawings, tolerances, and other limits.Verifies specified requirements of samples by using calipers, micrometers, optical comparators, resistance meters, and other equipment as required.Records inspection results on logs, graphs, and/or discrepancy reports.Maintains a familiarity with various data collection systems.Rejects defective parts, and prepares reject tag.Sets up inspection equipment.Maintains test and measurement equipment and calibration systems, and evaluates customer returns and internal corrective actions.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a High school diploma, general education degree (GED) or vocational or technical degreeSix months to three years of related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.Ability to write simple correspondence.Ability to effectively present information in one-on-one and small group situations.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to understand and carry out instructions furnished in written, oral, or diagram form.Ability to deal with problems involving several concrete variables in standardized situations.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

HPC Industrial,powered by Clean Harbors, based inDeer Park, TXis looking for Class A CDL / Manual Transmission Driversin the Austin, Tx area to be a part of their safety consciousTravelingteam! TheCDL Driveris responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew member and completes turnarounds with management oversight at client’s site in accordance with client and business requirements and company policies, practices, and procedures.Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. TWIC card is required! 100% travel. No restrictions must drive manual transmission. Why work for HPC-Industrial Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsAct as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions.Hands-on operation vacuum equipment and hydro blasting equipment.Operation of special equipment, such as Ultra High-Pressure pumps.Operate equipment by energizing the pumping equipment and/or any specialized hydro blasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job.May be required to examine surface cleaned to ensure conformance to company and customer specifications.Perform routine maintenance on company equipment being used on the job.Perform any and all duties associated with liquid vacs, air machines and jet rodders.May direct a crew of vacuum technicians.May transport equipment and personnel to and from customer locations.Completes pre and post trip inspections, driver’s logs and complies with all other vehicle policy and DOT requirements.Loading and unloading hoses.Unload vacuum truck at the dump site.Provide general maintenance in the field.Perform other related duties as assigned.High school diploma/GED or equivalent experience.Minimum of 1 year driving experience.Class A CDL License required. 8 or 10 speed experience.Must be licensed to drive a Manual Transmission vehicle. No restrictions.Ability to travel up to 100% of the year.Vac truck operations experience preferred.HAZMAT and Tanker Endorsements required.TWIC card is required. About HPC-Industrial HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors.HPC-Industrialoffers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. HPC-Industrial is a Military & Veteran friendly company. *HPC

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd more!What you will doPerform the installation of fire protection piping, valves, and accessories for commercial and industrial application. Must be able to work alternative shifts or weekends to meet customer and/or job requirements. Must perform all duties in a safe and professional manner.How you will do itAs sprinkler installer, you will efficiently and neatly perform the installation of wet, dry, pre-action, and deluge sprinkler systems.You will maintain proper documentation for work performed and must adhere to company safety policies and procedures.In this position you will be provided verbal and written instructions, as well as provide verbal and written instructions to apprentices.Carry/move equipment and tools weighing up to 70lbs.Capable of performing physical labor; perform work in unusual and sometimes difficult positions, such as climbing ladders, scaffolding, and high lift equipment.Maintain a clean and safe work area.You will have a positive attitude and the ability to adapt quickly.What we look forRequiredCompletion of apprenticeship program with at least 2 years of journeyman level experience.High School Diploma or EquivalentSelf-starter that can work with little or no supervision.Strong organizational skills, positive attitudeCapable of performing physical laborExcellent communication skillsAbility to work well with others.Will be required to work some night shifts.

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TXJob Type: Full TimeShift(s) Available: 1st - 2ndCompensation: $26.16/hr - $37.96/hrSign-On Bonus: $3,000Benefits Information$1.00/hr 2nd Shift DifferentialOvertime PotentialHoliday PayPaid time off after 30 daysHealth Insurance (Medical, Dental, & Vision)401(k) Retirement PlanTuition ReimbursementLife Insurance and Short-Term DisabilityCareer Development OpportunitiesEmployee DiscountsPrincipal AccountabilitiesEnsure refrigeration, boiler, and HVAC systems are operating properly through monitoring, PMs, and repairsMaintain boiler and refrigeration water chemistry through testingParticipate in activities (training, system reviews, documentation) with the ammonia PSM programMiscellaneous tasks and duties assignedAble to work weekends as neededWilling to be part of the Hazmat TeamRequired QualificationsMust be eligible to work in the United Sates without visa sponsorshipMust be 18 years or olderAbility to read, write, and speak EnglishMinimum of one year maintenanceAble to wear a full-face breathing respirator mask with or without a reasonable accommodationPrevious ammonia refrigeration or Process Safety Management (PSM) experiencePreferred QualificationsRefrigeration Engineers & Technicians (RETA) and International Institute of Ammonia Refrigeration (IIAR) training and certificationPrevious experience with regulated Process Safety Management (PSM) programsElectrical or mechanical experienceBoiler experienceAir compressor experienceConsidered candidates will receive a phone call from a (952) area code. Relocation reimbursement for qualified expenses. Equal Opportunity Employer, including Disability/Vet

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time - 10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThe Sprinkler Designer will be engaged in the preparation of detailed Computer Aided Design (CAD) drawings to ensure the efficient and effective placement of our products and systems.This will position will evolve into a hybrid position after a period of in office training/time.How you will do itRead and interpret construction documents, including drawings, specifications, and contracts.Interpret and apply applicable NFPA standards to the design and/or layout of the sprinkler systems based on the building type, construction type, hazard classification and architectural features.Design and layout sprinkler systems using specialized CAD software packages that are based on the AutoCAD platform; coordinate sprinkler system piping with other building components and perform hydraulic calculations.Perform field check of completed design to verify accuracy.Work closely with the district contracting teams to understand the contract with the customer, the scheduling of the design process, and the delivery needs of the installation crew; coordinate deliveries of system materials to the job site to meet the optimum installation start date.Mentor others in the proper execution of sprinkler design using acquired experience, proficiency and knowledge.Ability to assist sales in design estimations.What we look forRequiredHigh School diploma or equivalentAt least 1-5 years of fire sprinkler design experienceWorking experience of AutoCAD, HydraCAD, Sprinkler Design Software or equivalent sprinkler design softwarePreferredAbility to solve basic math problems including geometry and algebraProficient in AutoCAD, MSOffice, Sprinkler Design Software and a hydraulic calculation programInterpret and apply applicable NFPA standards for Automatic Sprinkler System LayoutNICET III certification preferred

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis person will be performing the required duties for completion of installation related tasks for electronic product lines and standard electronic systems.How you will do itCandidates will work a 7:00 – 3:30 shift with a 30-minute lunch break. (40-hours a week plus overtime as required.)Helping with installation of electronic systems, including start up through final testing. Follow verbal and written instruction, read, and understand complex construction blueprints, diagrams and specifications used in installation activities.Carry/move equipment and tools weighing up to 40 pounds. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet or more. Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with work. Wear appropriate safety equipment as required, including but not limited to hard hats and work boots. May be required to work alternate shifts or weekends to meet customer installation requirements. Perform other duties as requested.Daily submission of required paperwork.What we look for RequiredTexas Fire Alarm License required.3 to 5 years of commercial fire alarm installation experience.High School DiplomaFollow verbal and written instructions, read, and understand complex construction blueprints, diagrams and specifications used in installation activities.Support sales as needed.Read prints and specs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Demonstrate a high level of customer service.Strong organizational skills, positive attitude, and ability to learn quickly.Safety ConsciousProfessional appearance.