Gilmer, TX 75644 • (28.7 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (28.7 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (28.7 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (28.7 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Tyler, TX 75702 • (32.3 miles) • Full Time • 10/8/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Longview, TX 75605 • (44.4 miles) • Full Time • 10/8/2026

W&B Service Company has an excellent opportunity for a Transport Refrigeration Technician. We are the largest transport refrigeration dealer of Carrier Transicold, a world leader in Truck, Trailer and rail refrigeration systems. We are also the nation’s largest full service Hyundai Translead trailer dealer. We have 21 facilities throughout the Southwest, including Texas, Arkansas, Louisiana and Oklahoma.Duties will include:Perform diagnostics and repair starting and charging system, cooling and re-charge, and electrical including common fault codes. Repairs include performing leak detection procedures, compressor replacements, soldering refrigerant lines, evaporator/condenser replacements and front & rear main engine seal replacements.Perform repair and maintenance on reefer units in accor

Winnsboro, TX • (12 miles) • Full Time • 10/8/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Longview, TX • (43.8 miles) • Full Time • 10/8/2026

DescriptionThe Undercarriage Shop Technician 1 , performs basic to moderate diagnosis and repairs on heavy construction equipment undercarriage in a shop environment. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development.Essential FunctionsPersonally models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Statement.Performs basic repairs on equipment undercarriage and undercarriage components.Operates undercarriage build-up and rebuild machines, and a

Kilgore, TX 75662 • (44.2 miles) • Full Time • 10/8/2026

Revolution is now hiring for an Extrusion Manager position in Kilgore, TX. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.RESPONSIBILITIES/ DUTIES:Directs and coordinates activities of production department(s) in processing materials or manufacturing products in industrial organization by performing the following duties personally or through subordinate supervisors.Analyzes production schedule to estimate worker hours and create machining schedules that meet both internal and external customer needs.Reviews production schedules to ascertain product data such as types, quantities and specifications of products and scheduled delivery dates in order to plan department operations and establishes priorities and sequences for manufac

Gilmer, TX 75645-7877 • (28.5 miles) • Full Time • 10/8/2026

About Company: Integrity Services TX LLC is a trusted, Texas-based oilfield service company built on hard work, reliability, and doing the job right the first time. We provide a full range of field services to the upstream and midstream energy sectors across Texas and the surrounding region.Our core services include: General oilfield construction and supportRoustabout crews and facility maintenanceRight-of-way (ROW) clearing and reclamationPipeline installation, maintenance, and integrity workDirt construction – lease roads, location pads, reserve pits, containment ponds, and commercial site prepExcavation, grading, and heavy equipment operationsFounded and still operated with a strong emphasis on safety, quality, and customer relationships, Integrity Services TX has earned a reputation fo

Longview, TX 75605 • (44.4 miles) • Full Time • 10/8/2026

About the Role:BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients.In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services.BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developing pr

Tyler, TX 75701 • (35.3 miles) • Full Time • 10/8/2026

We are seeking a skilled and dedicated Industrial Maintenance Mechanic to join our team in Tyler, TX, 75701. In this role, you will play a crucial part in ensuring the smooth operation of our manufacturing facility by performing maintenance and repairs on a variety of industrial equipment. If you have a passion for problem-solving and a knack for mechanical systems, we want to hear from you! Responsibilities Perform routine maintenance on machinery and equipment to ensure optimal performance.Troubleshoot and diagnose mechanical issues, providing timely and effective solutions.Conduct repairs on various types of industrial equipment, including conveyors, pumps, and motors.Maintain accurate records of maintenance activities and repairs performed.Collaborate with other team members to improve

Longview, TX • (43.8 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Kilgore, TX 75662 • (44.2 miles) • Full Time • 10/7/2026

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world’s biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact.What does that mean for you? You’ll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn’t part of our business. It’s the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world’s biggest and best-loved brands. You’ll learn new ways of working, with automation and new technology that’ll help you ge

Tyler, TX • (35.5 miles) • Full Time • 10/7/2026

Company Description Tyler Pipe is hiring Foundry Production Workers to perform various job duties based on their assigned production area. These duties include operating, monitoring, controlling, maintaining, cleaning machinery used in the process of producing cast iron pipe and fittings. Most common job assignments for new hires are Core Machine Operator, Casting Processor, or Pipe Processor.Job Description Foundry Production Worker (Actual job will be assigned at New Hire Orientation and is based on the production needs at that time.)Location:Tyler, TXPay:Pay Rage $22.44 - $27.20/hourShift:Most openings are 2nd ShiftWhat You’ll Do:Complete the job duties related to their assigned work area such as: Operator machinery to make fitting cores.Grind fittings to remove excess iron and prepare

Greenville, TX 75402 • (41.9 miles) • Full Time • 10/6/2026

Description: Summary:Since 1996, Polara has designed and manufactured the most durable, technologically advanced, ADA-compliant and pedestrian-friendly crosswalk devices available. Polara’s top priority is pedestrian safety by producing high quality products. The Manufacturing Assembler position is a critical part of the Polara team. This position works directly with our product, assembling various components and preparing it for shipment.Job Duties include but are not limited to the following:· Produces components by assembling parts and subassemblies· Uses hand tools or machines to assemble parts.· Conducts quality control checks.· Reads and follows the green book guide for assembly instructions· Cleans and maintains work area and tools· Maintains a safe and clean working environment by

Greenville, TX 75402 • (41.9 miles) • Full Time • 10/6/2026

POSITION SUMMARY | In-Person Position | Greenville, TexasWe are seeking a hands-on, high-energy Mechanical Engineering Manager to lead our mechanical design and product development team for the VEX Robotics division. In this role, you will bridge technical design expertise with functional team leadership. You will manage a team of mechanical engineers and designers developing injection-molded plastics, metal structures, gears, structural motion components, and consumer/educational robotics hardware.The ideal candidate brings strong fundamentals in high-volume product manufacturing (DFM/DFA), 3D CAD modeling, structural analysis, and a passion for mentoring engineers while keeping complex multi-project lifecycles on schedule.VEX Robotics is a global leader in STEM education and competitive

Tyler, TX 75707 • (38.7 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Tyler, TX • (35.5 miles) • Full Time • 10/5/2026

Role OverviewCandidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards.Key ResponsibilitiesThe SMT operator will run and maintain the SMT equipment (paste printer, pick and place,reflow). Operator will also be expected to program jobs.Job Description:Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be ableto operate and maintain equipment other than SMT equipment.This person must be capable

Tyler, TX 75706-6031 • (35.5 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Greenville, TX 75402 • (41.9 miles) • Full Time • 10/5/2026

Shift: 1st ShiftSchedule: Monday-Friday / 7:00 AM to 5:00 PMPay Range: $18.00 to $20.00 per hour (based on experience)Make Your Mark in Advanced Manufacturing!Are you ready to take your manufacturing career to the next level? We're seeking a skilled Production Systems Operator to join our dynamic team and operate state-of-the-art machinery systems in our modern manufacturing facility.Key Responsibilities:Lead the operation of sophisticated production machinery systems.Perform quality control testing using industry-standard methods.Troubleshoot and maintain high-tech equipment.Operate modern material handling equipment.Contribute to continuous improvement initiatives.Qualifications:High School Diploma or GED.Manufacturing experience.Forklift/powered industrial truck experience.Safety-consci

Longview, TX • (43.8 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Kilgore, TX 75662 • (44.2 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Tyler, TX 75703 • (40.8 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Longview, TX • (43.8 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX 75706 • (25.4 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Longview, TX 75604 • (40.6 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/

Daingerfield, TX 75638 • (42.4 miles) • Full Time • 10/2/2026

The Bullpen Catcher plays a vital role in supporting the training and development of athletes across professional, collegiate, and youth levels. This individual is responsible for assisting with on-field activities, providing athlete support, coordinating sessions, and maintaining a high-performance environment. The role offers valuable exposure to performance training and player development, with opportunities for advancement into coaching and administrative positions.ResponsibilitiesAssist with daily training setup, flow, and breakdown in the bullpenSupport professional, collegiate, and youth athletes during warm-ups and drillsTrack athlete throwing performance and development dataCoordinate session schedules and communicate with athletesMaintain a clean, organized, and efficient bullpen

Lone Star, TX 75668 • (43.3 miles) • Full Time • 10/1/2026

Experienced CNC Programmers Only This Is NOT an Operator PositionA&E Machine Shop, Inc. | Lone Star, TX$27.00–$36.00/hour, based on experience | Full-Time | In PersonPLEASE READ BEFORE APPLYINGA&E Machine Shop, Inc. is hiring an experienced CNC Programmer who can independently program, set up, and operate CNC equipment.You must have previous hands-on CNC programming experience to be considered for this position.This position is NOT intended for candidates whose CNC experience is primarily:Loading and unloading material or componentsPressing cycle start and monitoring a machineRunning programs written by someone elseMaking basic offset adjustments onlyPerforming production operator duties without programmingAssisting another machinist with setupsWe need a machinist who can receive a bluepri

Longview, TX • (43.8 miles) • Full Time • 10/1/2026

The Materials Engineer works in conjunction with the Engineering Manager or Sr. level Engineer. The Materials Engineer is responsible for maintaining existing material designs and may work on the development, validation, release and launch of new materials, working in a cross-functional team environment. Responsibilities also include: continuous improvement of current production products/processes, assistance with manufacturing process improvement, customer concerns, warranty analysis, and supplier development. Main material focus is with rubber compounds and process chemicals for metal preparation for rubber bonding.What You’ll Do:Promote the STEMCO / Enpro Culture by exhibiting the five principles of exemplary leadership: Modeling the Way, Inspiring a Shared Vision, Enabling Others to Ac

Hawkins, TX 75765 • (16.6 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Greenville, TX 75402 • (41.9 miles) • Full Time • 9/29/2026

Position SummaryEXOS Aerospace is seeking a Guidance, Navigation, and Control (GNC) & Flight Controls Engineer to support the development, analysis, simulation, testing, and validation of flight systems for reusable suborbital vehicles and flight test infrastructure.This role is primarily focused on GNC, including vehicle dynamics, trajectory design, guidance logic, navigation performance, control system development, simulation, and post-flight data analysis. The ideal candidate will also be comfortable working beyond traditional GNC boundaries to support instrumentation, sensors, controls hardware, data acquisition, integrated testing, and troubleshooting as needed.In addition to the engineering scope, this position carries technical program management responsibilities in direct support o

Longview, TX 75604 • (40.6 miles) • Full Time • 9/28/2026

Description: INDEVCO North America (INA) is seeking a skilled and experienced Machine Operator specialized in Blown Film production to join our manufacturing team. The ideal candidate will be responsible for the efficient operation of extrusion machinery, ensuring the production of high-quality blown film products. The Machine Operator will play a crucial role in maintaining optimal machine performance, troubleshooting issues, and adhering to safety and quality standards.Key Responsibilities:Operate and monitor blown film extrusion machinery to produce quality film products according to production specifications.Set up, adjust, and control machine settings, such as temperatures, speeds, and thickness, to achieve desired product characteristics.Conduct routine equipment checks and preventat

Pittsburg, TX 75686 • (29.5 miles) • Full Time • 9/27/2026

Title: Quality Assurance Lead Location: Pittsburgh, PA Team Dynamic: working within a larger team of data analysts, business analysts, developers, management team. Roles and Responsibilities: • Lead quality engineering and testing for data?driven regulatory reporting applications. • Validate data accuracy and completeness across source?to?target data flows and reports. • Design and execute test strategies covering functional, regression, and data reconciliation testing. • Partner with technology and business stakeholders to ensure regulatory requirements are met. • Oversee test execution, defect analysis, and root?cause identification. • Own testing documentation including scope, strategy, execution results, and delivery artifacts. Must Have Technical Skills: • 5–8 years of experience in d

Tyler, TX 75701 • (35.3 miles) • Full Time • 9/27/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Kilgore, TX 75662 • (44.2 miles) • Full Time • 9/26/2026

***This job has preference to qualified local job seekers within 60 miles of our Axis Kilgore, TX facility.Reporting to Operations management, the Pumping Foreman leads field pumping operations and directs assigned crew members in the safe and efficient rig-up, operation, maintenance, movement, and rig-down of pumping equipment, tools, and related assets at the shop, yard, and customer locations. This position serves as a field-level leader responsible for coordinating job execution, verifying equipment readiness and pressure-control activities, communicating with customers and other service lines when designated, and coaching Pump Operators and new employees on safe work practices, job procedures, equipment operation, and documentation requirements.Essential Duties and ResponsibilitiesThe

Quitman, TX • (2.2 miles) • Full Time • 9/26/2026

Join Our Team as a Manufacturing Production Employee!Are you ready to bring your skills to a dynamic and growing company? Amphora Nutritional Manufacturing, located in Quitman, TX, is looking for a dedicated and detail-oriented Manufacturing Production Employee to join our team. If you have at least one year of experience and are eager to contribute to a company that values quality and teamwork, we’d love to hear from you!About Amphora Nutritional ManufacturingAt Amphora Nutritional Manufacturing, we pride ourselves on producing high-quality nutritional products that make a difference in people’s lives. Our team is passionate about excellence, and we work together in a supportive and collaborative environment to ensure every product meets our high standards.What You’ll DoAs a Manufacturing

Sulphur Springs, TX 75482 • (26.3 miles) • Full Time • 9/26/2026

Description: Position SummaryThe Hem-Saw Machine Operator is a skilled and safety-focused team member responsible for setting up, operating, and maintaining a Hem-Saw to cut materials according to work orders and engineering specifications. ---A Full Day in This Role – Start to Finish1. Start-of-Shift Preparation· Clock into the correct work order or general shift activity.· Inspect and clean the saw area, removing scrap or leftover materials from previous shifts.· Conduct a basic equipment inspection:o Check blade conditiono Verify coolant levelso Ensure guards and safety devices are functioningo Confirm vise/clamps are clean and operational· Put on all required PPE (safety glasses, gloves, steel-toe boots, hearing protection).---2. Reviewing the Work Orders· Pull the first scheduled work

Sulphur Springs, TX 75482 • (26.3 miles) • Full Time • 9/25/2026

Now Hiring: Cabinet & Hardware Assemblers (Bilingual Preferred)Estamos Contratando! Ensambladores de Gabinetes y Hardware (Se Prefiere Bilinge)Are you experienced in construction or assembly? Can you work with your hands, follow blueprints, and use power tools confidently?Rodgers Wade is looking for Cabinet/Hardware Assemblers to join our team in Paris, Texas!Tienes experiencia en construccin o montaje? Sabes usar herramientas y trabajar bien en equipo?Rodgers Wade quiere que formes parte de nuestro equipo como Ensamblador de Gabinetes/Hardware!Location / Ubicacin: Paris, TXPay Rate / Salario Inicial: $15–$17 per hour (based on experience)Schedule / Horario: Monday–Friday | 5:00 AM – 1:30 PM Some Saturdays & Overtime as needed / Algunos sbados y horas extras, segn sea necesarioWhat You’ll

Tyler, TX 75703 • (40.8 miles) • Full Time • 9/24/2026

Production ManagerCable’s Roofing is always interested in connecting with experienced professionals who may be a strong fit for our team. While we are not actively filling this position at this time, we are keeping our options open for an experienced Production Manager for our Tyler, Texas office.This role is responsible for overseeing the day-to-day production of roofing projects from scheduling through completion. The Production Manager works closely with Project Managers, crews, suppliers, sales, and office staff to make sure jobs are properly prepared, completed efficiently, and closed out accurately.The right person will be organized, proactive, accountable, and comfortable managing both people and moving parts. Strong communication and follow-through are extremely important in this r

Kilgore, TX • (44 miles) • Full Time • 9/24/2026

DescriptionJob Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals.Mid-level position – Generally has a minimum of four years of experience and/or demonstrated job relevant knowledge/skills and has obtained welding certifications in the FCAW and GMAW welding processes (1-4 G/F). The MFG Welder 3 has moderate