Under the guidance of the Maintenance Supervisor, the Maintenance Technician supports the operation, inspection, and maintenance of all production equipment and systems within the facility, including mechanical, electrical, and plumbing aspects. This role is responsible for repairing and installing advanced production/manufacturing equipment, inspecting equipment for proper functioning, and performing preventative maintenance duties per manufacturer specifications. May mentor and provide support to less experienced mechanics, diagnose equipment malfunctions, and make more complex repairs or adjustments as needed.
1st, 2nd & 3rd Shifts available.
Job Duties: Perform preventative maintenance on advanced production equipment. Repair sophisticated production equipment as needed. Conduct breakdown analysis. Oversee or perform general housekeeping and upgrade production lines with new or upgraded equipment/technology. Direct activities of outside contractors working on the assigned line. Change production lines for package changeovers. Enforce GMP, safety, and audit standards. Work independently under limited supervision (self-management). Document work schedules and tasks completed. Respond effectively to all emergencies. Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize safety hazards and propose methods to eliminate them. Adhere to all policies for the safe storage, usage, and disposal of hazardous materials. Participate in ongoing technical, safety, and operational process training programs. Maintain a clean and safe work environment, ensuring compliance with State, County, or City ordinances, codes, or laws. Document work performance and materials procurement as directed, using the work order system.
Benefits: Vision Medical Dental PTO
Qualifications: High School Diploma or equivalent; Associate’s or Bachelor’s Degree preferred. Completion of an applicable technical training program. 3+ years of experience in equipment maintenance, basic electrical work, and troubleshooting practices. 2+ years of experience in the operation and maintenance of a large-scale manufacturing facility. Possess mechanical and electrical aptitude. Ability to work flexible schedules, including weekends, nights, and holidays. Experience working with computers and Microsoft Office (Outlook, Word, Excel). Excellent oral and written communication skills. Self-motivated and able to work independently or as part of a team. Ability to lift/carry up to 40 lbs. and push/pull up to 12 lbs. Capable of stooping, bending, stretching, and reaching outward and over the head. Willingness to sit, stand and walk for extended periods. Use of Personal Protective Equipment (PPE) when necessary. May require travel and completion of all appropriate training classes. Willingness to cross-train into other departments.

The Assembly Technician is responsible for assembling manufactured products and packing them according to specifications. All tasks must be completed to meet quantity and quality standards within assigned functions.
1st shift: 6:30am - 3:00pm
Job Duties: Assemble machinery, fabricated metal products, electrical equipment, appliances, and more according to instructions. Read blueprints, schematics, or similar documentation and build products to those specifications. Use various machines and hand tools to complete assigned tasks. Maintain logs, records, and reports concerning production, machine maintenance, and product inconsistencies. Maintain equipment and conveyors, performing basic repairs as needed. Inventory tools, parts, and supplies; contact materials handler when supplies are needed. Periodically check products according to company policy to ensure quality and uniformity; resolve any identified issues and alert the supervisor. Exhibit teamwork by maintaining a positive and cooperative attitude. Support peers during high demand by working assigned hours and required overtime; comply with scheduled start/stop times and break periods. Confidently communicate, interact, and build customer relationships in alignment with the company's culture. Perform other job-related duties as necessary or assigned
Benefits: Vision Medical Dental PTO
Qualifications: High school diploma or equivalent required. Legally authorized to work in the United States without company sponsorship. Proficient in Microsoft Office Suite or related software for completing logs and records. Ability to read and understand blueprints and schematics. Ability to differentiate between colored wires, tabs, and electronic components. Ability to properly maintain and perform basic repairs on equipment. Basic skills in mathematics, reading and writing. Detail-oriented and consistent. Effective team player. Dependable and extremely trustworthy, with the ability to pass a criminal background check. Reliable commute or planning to relocate before starting work (Required). Ability to stand for prolonged periods and perform repetitive tasks. Ability to lift up to 30 pounds. Manual dexterity for assembling products or machines as directed. Excellent hand-eye coordination. Must wear gloves and ear protection.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayOn The Job Paid TrainingTuition ReimbursementUnlimited Career PathGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd more!What you will doAs an HVAC Truck Based Senior Controls Technician, you will perform HVAC control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.In addition, you will:Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front-line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build a career with a first-class global organization.How you will do itLoading Johnson Controls field and network-level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e., Sensors, actuators, et c.) and completing all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems require basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents change and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability is maintained.Engage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. A high degree of regard for employee and subcontractor safety.What we look forRequired:Demonstrated technical aptitude in mechanical and electro-mechanical fields.Able to use hand/power tools, and electrical testing equipment such as a multimeter.A solid knowledge base in the use of personal computers.Attention to detail.Good communication and listening skills.Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.Strong understanding of HVAC systems, sequence, and applicationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requistion Number:23998When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingJob Summary (Purpose):The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders).Key Characteristics:Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policiesDemonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvementAbility to function effectively as a member of a production teamDuties and Responsibilities:Sort, inspect, clean, paint, label, and refill empty cylinders.Maintain a safety focus at all times and wear the proper PPEEnsure the consistent quality of cylinders are being processedLoad filled cylinders onto the truck(s) for the next day’s shipments.Ability to stand and walk 8 – 12 hours per day.Ability to lift 50 pounds repeatedly throughout the day.Perform general housekeeping duties.Knowledge, Skills and Abilities:Ability to follow processes, procedures, and instructionsAbility to function effectively as a member of a production teamWillingness to grow and learnBasic mechanical aptitudeBasic computer knowledgeWork in a fast-paced environmentBe able to stand 8-10 hours per dayAbility to obtain required state licensingAbility to be forklift certifiedEducation and Experience Required:1 - 2 years work experience in manufacturing is preferredHigh School Diploma or GEDWorking conditions:Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed.AmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Our Production Team is Kind of a Big Deal!UniFirst is seeking a reliable and hardworking Production Team Partner to join our UniFirst Family. As a Team Partner in the Production Department, you will be working on a team to prepare orders and floor mats for delivery to our customers. At UniFirst we have a 5-day work week, enjoy Saturday and Sunday off!! We have an immediate opening and provide on the job training.Pay & Benefits:On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses.What’s in it for you Training: Our Team Partners receive ongoing cross-training, exposing them to different areas of production. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer a 40-hour work week. Enjoy weekends off!Career Growth: Some companies like to promote from within, we love to! Many of our managers started at UniFirst working on the production floor!Culture: Our family culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome.What you’ll be doing:Bundle, package, and roll articles in accordance with company requirementsHandle flat good orders and select appropriate itemsSelect appropriate items by style, color, etc.Inspect products for tears, holes, stains, excessive moisture, etc.Follow all safety policies, HACCP and medical guidelines.Perform other duties as described by area supervisor or managementQualificationsWhat we’re looking for: High school education and/or GED equivalent preferredMust be at least 18 years of age or older to operate mat roller and any machineryMust be at least 16 years of age or older to work in the load building areaAbility to stand and walk for an 8-hour shiftAbility to read, write, and communicate clearly with managementAbility to lift up to 15-30 lbs Ability to perform basic mathematical operations using American standard units of weight measurement, volume, and distance About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

What you will doPerforms assigned system commissioning using Johnson Controls configuration and commissioning tools.Troubleshoots and resolves basic HVAC mechanical, electrical, and control problems. Responds to basic warranty calls.How you will do itLoads system-level controller software. Performs basic commissioning and system diagnostics from system-level controllers to end devices (i.e. sensors, actuators, etc.) and completes all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents change and provides information for as built documentation.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safetyWhat we look forRequiredDemonstrated technical aptitude.Able to use hand and power tools (i.e., drills, saws, etc.)Basic computer skills required.Attention to detail. Effective communication and listening skills. Depending on location, the mounting and termination of low voltage devices may have special licensing requirements. PreferredTwo years’ experience in installing electronic and/or mechanical systems.Demonstrated knowledge of HVAC systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requistion Number:23998When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingJob Summary (Purpose):The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders).Key Characteristics:Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policiesDemonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvementAbility to function effectively as a member of a production teamDuties and Responsibilities:Sort, inspect, clean, paint, label, and refill empty cylinders.Maintain a safety focus at all times and wear the proper PPEEnsure the consistent quality of cylinders are being processedLoad filled cylinders onto the truck(s) for the next day’s shipments.Ability to stand and walk 8 – 12 hours per day.Ability to lift 50 pounds repeatedly throughout the day.Perform general housekeeping duties.Knowledge, Skills and Abilities:Ability to follow processes, procedures, and instructionsAbility to function effectively as a member of a production teamWillingness to grow and learnBasic mechanical aptitudeBasic computer knowledgeWork in a fast-paced environmentBe able to stand 8-10 hours per dayAbility to obtain required state licensingAbility to be forklift certifiedEducation and Experience Required:1 - 2 years work experience in manufacturing is preferredHigh School Diploma or GEDWorking conditions:Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed.AmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

We are looking for Part-Time Night Trash Collectors to join us! Having your own truck is required. Must have your own truck.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job. You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training.  No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs. A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer is preferred A valid driver's license is preferred Current auto insurance in your name for your vehicle, or listed as a driver on policy is preferred
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

An upscale senior living community is seeking an experienced Director of Operations. The Director of Operations oversees compliance of industry standards, work procedures, and upholds a positive culture and accountability. Support our growing senior living communities by providing effective operations oversight by emphasizing the attention to details. Collaboratively work with the communities to grow and maintain occupancy by ensuring operational standards are consistent with established goals to provide a positive experience for residents and team members.
We offer competitive, performance-based compensation programs for capable and dedicated employees who share commitment to quality service and performance.
Responsibilities: Perform weekly/biweekly property visits and provide community report to corporate team. Report to include deficiencies and adequacies. Corrective measures for a visit will be presented to ED by the end of the day of the observation. Send weekly reports to the corporate team at the end of the week. In conjunction with the VP of Operations, establish, implement and improve policies and work procedures for departmental operations. Support operation initiatives with Directors in conjunction with the VP of Operations and Director of Development Operations, responsible for leading and directing strategic planning, administration, and coordination of the Hospitality Programs, ensuring excellence in all aspects of the operation of the programs; and directing and leading special projects and initiatives. Assist with new community openings, projects, procurement, as necessary. Responsible for delegating responsibility and accountability to the responsible ED. Support organization of annual community events/clinics by obtaining pricing and other strategic operational issues to present to VP of Operations for approval (e.g., Flu Clinic, CPR training) Work with corporate maintenance when necessary to ensure inspections, permits, licenses, and certificates are up to date and saved to appropriate efiles. Supporting and at times initiating continuous improvement initiatives and facilitating communication for corporate operations. Assist in streamlining annual (monthly) calendars by department, Maintenance, Transportation, Housekeeping, F&B and Social programming. Conduct new lease file audits on a regular basis to ensure compliance with financial goals. Ensure contracts are in the best interest of our facilities and budgets. Assist communities in negotiating vendor rates that provide services at our multiple communities. Maintains excellent relationships with team members, residents, guests and clients. Demonstrate an attitude of teamwork when interacting with community team members; take ownership of job responsibilities through prompt and appropriate follow-up to issues as they arise (ensuring appropriate resolution); anticipate needs of residents and/or community team members in a proactive fashion. Assist in efforts related to recruitment, hiring, development and employee relations. Assist in training resources for continued education of team members.
Benefits: Medical, Dental, and Vision - Multiple plans to choose from Health Savings Account (HSA) Health Reimbursement Arrangement (HRA) Prescription Discounts Telemedicine Basic Life and AD&D Coverage Voluntary Life Voluntary STD and LTD Accident and Critical Illness Coverage 401(k) Employee Assistance Program Advocate4Me – Med-concierge United Health Care rewards – earn up to $300 for healthy activities PTO
Qualifications: Bachelor’s degree in business-related business field required Minimum of 5+ years of experience in senior living-related experience preferred; involvement with various business management segments required. Strong MS Office skills and or Adobe Acrobat skills. Must present a high degree of professionalism in both written and verbal communication. Must be flexible, adaptable, and thrive in a fast-paced, changing environment.
Equal Opportunity Employer.

We are looking for Part-Time Night Trash Collectors to join us!
Pay is up to $15/hr with your own pick up truck and up to $18/hr if you do not have your own vehicle. This location does REQUIRE a reliable open-bed pickup truck or vehicle with a trailer.
Join our team as an Apartment Trash Collector (Service Valet) and enjoy the convenience of flexible evening hours in your local area. Whether you're looking to supplement your income or earn extra money alongside another job, this position offers the perfect opportunity.
What you’ll be doing: Use your truck to transport trash bags collected from residents' doorsteps to the onsite trash compactor at the apartment community (no large or bulk items, and no offsite driving or dumping) Take required photos (arrival, departure, tracking, non-compliance) using our company’s App during service Enjoy working close to home as we serve multiple apartment communities, aiming to assign you to a property within a 10–15 minute drive.
Schedule: Typically work 5 nights a week from Sunday through Thursday Shifts are 2-4 hours long, starting either at 7:00 pm or 8:00 pm (some positions may have earlier start/end times, and Sundays may require additional hours) Part-time hours offering 10-15+ hours per week
What you get: Hourly pay: $15-$18/hr Associates with a pickup truck or vehicle using a trailer will receive the higher end of our pay range to compensate for the use of their vehicle Get paid as you earn using EarnIn Stay active and fit while enjoying the outdoors, this job doubles as a workout Opportunities for career advancement: As an essential business experiencing continuous growth, you can expect reliable hours, consistent pay, and exciting prospects for career progression within our dynamic team Employee referral bonus program Earn rewards through our recognition program Tuition reimbursement Immediate start dates are available, allowing you to begin earning and making a difference right away
What we require: Minimum age requirement: 18 years old A reliable open-bed pickup truck or vehicle with a trailer Valid driver's license and current auto insurance in your name (or listed as a driver on policy) for your vehicle Capable of adapting to work both indoors and outdoors, regardless of changing weather conditions Ability to lift and transport items weighing up to 50 lbs. Able to walk the distance of property, and be exposed to disagreeable odors Capability to climb up and down staircases/steps multiple times throughout the evening. Ownership of a smartphone with a data plan to utilize our mobile app No prior experience is necessary; we provide hands-on, paid training from day one
Safety statement: We prioritize your safety and provide Personal Protective Equipment (PPE) including face coverings, gloves, safety vests, and more Count on a dedicated team of occupational health & safety professionals who manage all aspects of associate safety, ensuring a secure work environment
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.