Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

RoadSafe is looking for Flaggers to join our team!
Hiring Flaggers that have a valid driver's license. Starting pay is $15 per hour.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Must be able to read and speak English Driver’s license required Pass a drug test High School Diploma or GED Experience in Flagging/Traffic Control is preferred, but we offer training Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Overview: At Caliber Auto Care, our Purpose is Restoring the Rhythm of Your Life®. We are looking for individuals that have a desire to Do the Right Thing and thrive in a purpose-driven, team-driven culture that supports you to reach your full potential. If this sounds like you, please join us!The Automotive Technicians repair vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Perform mechanical repairs to vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Effectively work with Body Technicians to assist with the repair process. Pay: 27 - 45 Flag Hours, DOE (Competitive Pay Depending on level of and Mechanical Experience and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Essential Job Duties Examines vehicles to determine extend of damage or malfunctions Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices May repair, reline, replace and adjust brake systems and perform vehicle alignments Test and adjust repaired systems to meet manufacturers' performance specifications Repair and/or replace engine components, brake systems, steering and air bag systems Perform other related duties as assigned to ensure an efficient and effective repair Skill/Requirements: Must be at least 18 years of age Must have a valid driver's license and be eligible for coverage under Caliber's insurance policy (Not an excluded driver) Ability to effectively communicate with others Ability to read and understand instructions, written estimates and work orders Multi-tasking; adapts easily to fast-paced environment Personable, friendly demeanor with "World Class" customer service approach to internal and external customers Maintain a well-groomed appearance Physical Requirements/Working Conditions: The position is based in a normal shop environment. Frequent physical activity such as kneeling, bending, squatting, stooping, lifting above shoulders, standing for long periods of time during the repair of a vehicle is a part of daily activity as well as repetitive tasks involving hand and arm motion and lifting objects over 50 pounds. Must be able to push/pull parts carts and cars with assistance. The working environment consists of: Exposure to fumes, chemicals, dust, along with high levels of noise as well as regularly exposed to working near moving mechanical parts. Caliber enforces the mandatory requirement to wear protective equipment. Must have manual dexterity to operate equipment. Subject to weather conditions both inside and outside.Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.The responsibilities of the role include:Performs setup, programming and operation on a variety of machining equipment.Machining products to tight tolerances.Working independently and as a team to achieve maximum quality.Computing and verifying dimensions to ensure accuracy.Observing all applicable safety practices and immediately reporting any unsafe practices or conditions.Recognizes and understands flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participates in proactive risk analysis of flight/product safety critical parts and processes.Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed.Computes dimensions and tolerances and measures and lays out work pieces.Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance.Adjusts and sets up machine tools for use by machining tool operators.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Education Requirements:High school graduation and completion of a diploma training program at a college or technical school.Technical Requirements:High degree of mechanical aptitude, accuracy and precision.Thorough knowledge of manufacturing, tool design, fabrication methods and processes, metallurgy and heat treating.Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels.Working knowledge of production management computer systems and other related internal control systems.Regularly required to stand for prolonged periods.Completion of a machinist apprenticeship program; or equivalent.Attainment of trade certification.Directly/indirectly related work experience representing continuous learning and required for someone to perform this job competently is one to three years. The requirements for an ideal candidate include:The ability to read and interpret manuals, technical drawings, and blueprints.Proficient in the use of precision measuring instruments and hand tools. The ability to follow both written and verbal instructions.The ability to lift up to 50lbs without assistance.The ability to stand for extended periods of time.Working knowledge of welding, hydraulics, electricity and pneumatics.Ability to read, understand and interpret blueprints.Strong mathematical aptitude.At StandardAero, we offer:A clean, safe, and temperature controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of machines (Mills, Grinders, EDM's, CNC's, etc.).A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organizationStandardAero is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, pregnancy, age, national or ethnic origin, religion, sexual orientation, gender identity or expression, transgender status, genetic information, status as a protected veteran, and basis of disability status or any other federal, state or local protected class.Must meet US Persons requirements per ITAR.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

What you will doUnder minimal supervision, the HVAC Senior Controls Technician conducts preventive maintenance, repair, installation and commissioning as well as general servicing of control systems including detailed troubleshooting of systems and properly completes required project and service documentation. Responsible for high levels of customer satisfaction through direct, onsite customer interface. With a high level of complete technical competence, mentors Control Technicians, Service Technicians and Mechanical Technicians on Building Automation activities.How you will do itProvide controls system repair and/or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Diagnose and repair complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consult with the customer through data gathered and site assessments. Provide field proposals for retrofits, upgrades and or enhancements to existing equipment. Assist sales by providing technical recommendations for sales leads.Manage assigned work to meet professional and efficient execution of time and customer satisfaction. Report problems or changes to management immediately. Interface with Branch Manager, Service Manager, Service Project Manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner.Provide sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Communicate with the JCI contractor or customer upon arrival and before leaving the work site. Ensure high levels of customer satisfaction. Meet regularly with customer to become familiar with operating problems. Keep management and customer informed on the nature of service provided and outstanding issues and recommend system enhancements, upgrades and/or replacement. Promote the sale of add-on work.Train the customer in control systems operations. Deliver manuals and documentation to the customer for training needs as required.Assist in the design and configuration of Building Control systems as defined by the contract documents. Create flow diagrams, sequence of operations and bill of material, network layouts and electrical schematics as required.Assist in the coordination and creation of necessary drawings and equipment schedules for submittals and installation as well as the development and testing of software programs necessary to operate the system per the intent of the project requirements.Select order and track the delivery of materials for assigned projects. Coordinate factory-mounting processes to meet factory and project schedule.Assist in the loading and commissioning of all system and network-level controllers as required. Assist in validation of complete system functionality and troubleshoot problems with subcontractors and other trades to ensure proper operation.Conduct extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained.Provide safety awareness while working onsite with Johnson Controls subcontractors. Adhere to all Johnson Controls and customer safety standards with a high degree of regard to employee and subcontractor safety. Attend required safety training and provide safety leadership and instruction to all Controls Technicians in the branch.What we look forRequired:Minimum of two (2) years of experience in Comfort Building Automation.Experience installing and servicing control systems on HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Ability to explain technical information to technical and non-technical people.Effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.Preferred:Experience in HVAC DDC (Direct Digital Controls) systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to Building Automations, electrical and low voltage controls components.Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer: Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity:At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Performing basic welding activities to effect repairs on facilities and equipment.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems.Perform and assign all preventive maintenance on facility and production assets.Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule.Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required.Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours.Assume responsibility for all shifts in the maintenance department.Oversee and implement all maintenance related regulatory and environmental compliance requirements.Assume responsibility for all aspects of safety within the maintenance department.Perform Confined Space and Lockout / Tagout procedures where appropriate.Monitor training status of technicians and provide time for required training as needed.Utilize a Computerized Maintenance Management System.Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor.Train and develop maintenance partners.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred.Must be at least 21 years of age.Valid driver’s license and a safe driving record are required.Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required.Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered.Minimum of 2 years of experience supervising maintenance personnel is preferred.Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required.Proficiency in Microsoft Office skills is required.Experience in Hand & Power tools is required.Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Paid Drive TimeEnjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.**BATTLE PAY!**AN ADDITIONAL $10 PER HOUR during the peak summer season! Don't miss out on this rewarding opportunity!Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay from $30 - $40/hour DOEWHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 3+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Install DriverMonday - FridayAs a CSC Appliance Install Driver your days will be active,delivering and installing laundry and/or air vending equipment to a variety of places in your assigned service area. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life.Position Duties:Deliver and Installlaundry or air equipment to customer's homes and client locationsDeliver and Install ancillary technology (card readers, digital enhancements)Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machinesPrepare equipment for delivery (assemble required parts prior to loading on trucks)Instruct customers and/or clients how to operate equipment in a safe and effective mannerStaying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Position Requirements:High School diploma or equivalentValid Driver's LicenseMust be 21 years of age or olderAbility to pass pre-employment screeningDOT Certification is a plus!1 year of job-related experience in the areas of delivery and installation (preferred) training is providedMechanical & Maintenance Experience/KnowledgeExperience driving box trucksAbility to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related)Knowledge with computers and smart phone technologyTroubleshootingRoute Driving Experience a plus!Customer ServiceVisit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Job Title: Machine Operator 1FLSA Status: Non-ExemptDepartment: OperationsReports to: Assistant Manager, Superintendent or Assistant SuperintendentGENERAL DESCRIPTION / PURPOSE: Machine Operator 1 (MO1) a field based position, is responsible for operating, maintaining, and repairing company railway maintenance and inspection equipment. This position can operate Loram’s on track MOW equipment and/or on track vehicles with supervision in both operating and travel modes. In this role you may be assigned to various types of equipment platforms dependent on business needs and demands.ESSENTIAL JOB FUNCTIONS: Safety FocusedAbility to lead a comprehensive and appropriate job briefing during operations shifts, maintenance shifts, and while conducting maintenance tasks.Consistently follows safe work processes, procedures and rulesUnderstands on track safety and can explain specifics when askedAble to locate all emergency equipment and demonstrate correct operationMachine Operations and Technical Knowledge Conducts machine inspections to identify problems, defects, changes, and hazards and communicates conditions to the operator or supervisor and performs common repairs as instructed. Provides accurate feedback that allows machine leadership to make maintenance decisionsAccurately records and reports common parts used to supervisor, including floor stockPerforms maintenance and repairs according to set schedules and policiesAccurately describes gauge and HMI functions as they relate to machine operationDemonstrates the ability to document and complete daily field reporting, personal expense reporting, field lodging, and other administrative reporting as necessaryBEHAVIORAL COMPETENCIES: Safety AwarenessValues BasedLearning on the FlyAction OrientedListeningPersonal LearningREQUIRED QUALIFICATIONS:Experience: Internal: 3+ Months Experience working with Loram equipment or equivalent in a 24/7 environment; Some assignments require Excavator experience. Meet all relevant or applicable pre-qualifications as noted in the general description for this role and Loram’s career development matrix.External: 2+ Years Demonstrated technical skills such as mechanical, electrical, hydraulic and machine operations. 2+ Years Demonstrated ability to learn communicate verbally and in writing and learn best practicesLicenses/Certifications: Maintain Railroad Certifications, CPR/First Aid, valid Driver’s LicenseSlots – 1+ year experience Heavy equipment operator (Backhoe, Excavator, or alike). Heavy Maintenance/ Construction equipment maintenance. Basic administration computer skills. Working knowledge of data systems and remote equipment operations cellar or tethered. Aurora - Minimum of 1 year computer or technology background. 1 year of working knowledge working with MS Windows. Preferred radiation experience. Commercial Driver’s License or able to obtain a Class B. WORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.100% travel, including international, using any method of transportation.Ability to apply high levels of cognitive, analytical, retention and reasoning.Excellent communication skills used within any social context.Can stand, sit, walk, reach, balance, stoop, kneel, hear, taste and smell.Can see up close, distances, colors and has use of peripheral vision and depth perception.Can tolerate variable and sometimes extreme physical conditions during visits or inspections of company equipment in a railroad environment.Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.Rev: Nov 2023#LI-RL1#LI-REMOTE

At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team!What you get to do: Conduct daily ride inspections Perform preventative maintenance and scheduled carpentry services Provide support in troubleshooting and carpentry repairs with rides and facilities. Provide excellent service to guests and team members Consistently practice safe work habits including, but not limited to the use of personal protective equipment, lifting and reporting of unsafe situations What it takes to succeed:Must be at least 18 years of age.Must have a high school diploma or equivalent.Must have extensive knowledge in operation of a wide range of power and hand tools (i.e. table saw, ban saw, panel saw, routers, planers, compound miter saws).Must have at least three (3) years working knowledge in carpentry trade.Must be able to read and understand blueprints.Must have basic math skills.Must have a valid driver's license and the ability to obtain a SEA driver's license.Must be able to quote new projects and work with supply vendors on ordering the correct materials to complete a given project.Must be able to stand and walk for prolonged periods of time in extreme weather conditions. Must be able to walk uphill 35-40 degree slopes and must be able to work on heights above 150 feet. Must be able to frequently lift, push, and pull a minimum of 75 pounds. Must have excellent written and verbal communication skills in the English language.Consistently practices safe work habits including but not limited to the use of personal protective equipment, lifting and reporting of unsafe situations.Must be willing to comply with all SEA grooming guidelines and employment standards.Must be willing to work a flexible schedule that includes weekdays, weekends, evenings, nights and holidays.Compensation: $25.00 PHThe perks of the position:Paid Time OffComplimentary Park Tickets and PassesPark Discounts on Food and MerchandiseMedical, Dental, and Vision Insurance401K Retirement planVoluntary InsuranceLife InsuranceDisability BenefitsTuition ReimbursementDependent and Health Care Flexible Spending AccountsEmployee Assistance ProgramLegal Assistance PlanEEO Employer:SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.

Requisition Number:24318When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Are you ready to embark on an exciting career with ADB Companies, a leading nationwide provider of technology infrastructure solutions We are currently seeking a Foreman to join our wireline team and lead the installation of fiber optic cable for various telecommunication projects. This is an excellent opportunity for individuals seeking growth in the utility construction industry, and ADB is committed to providing extensive development within the trade. At ADB, we prioritize the safety, well-being, and career growth of our team members above all else. Our renowned world-class culture, work stability, and career development opportunities have set us apart in the industry. Join our team and become part of an ALL IN culture that values safety, wellness, learning, diversity, inclusion, and community engagement. As a Foreman, you will play a crucial role in our operations. Your responsibilities will include proficient-level manual labor, equipment operations, leading crews, and ensuring the successful completion of projects on various safety-sensitive utility construction sites. You will demonstrate your expertise in utility print and map reading, while also providing guidance and training to other construction crew members on fiber installation practices, print reading, equipment operations, and OSHA requirements. Safety is our top priority, and you will be expected to lead by example, following and enforcing all required safety practices. Additionally, your strong communication skills will be essential as you engage directly with customers, subcontractors, homeowners, and address any complaints or issues that may arise. Here's an overview of the key responsibilities: Perform proficient-level manual labor and operations, including hand digging with a shovel, setting up traffic control, operating entry-level equipment, placing fiber, loading materials, leading crews, and more on various safety-sensitive utility construction sites.Showcase your proficiency in utility print and map reading, ensuring accurate project execution.Demonstrate at least 1 year of independent operating experience with various equipment, such as directional drills, mini, plow, hydro, etc. You will be fully trained in all safety regulations related to operating heavy equipment.Lead and support the setup and shutdown of utility construction projects, including traffic control, in diverse conditions such as highways, side streets, parking lots, and downtown locations.Exemplify a safety-first approach, ensuring compliance with all required safety practices during safety-sensitive duties.Communicate professionally with customers, subcontractors, homeowners, and effectively address any complaints or issues that may arise.Train and mentor other construction crew members on fiber installation practices, print reading, equipment operations, OSHA requirements, and more.Load and unload materials and equipment from vehicles at construction yards and jobsites.Lead by example, ensuring adherence to safety rules and regulations, and effectively guide others on jobsites.Engage in on-the-job training with Senior Foreman and/or Supervisors to further develop your skills in the utility construction trade.Foster a culture of hazard identification by utilizing the pre-task process.Perform other duties as requested, contributing to the overall success of the team. To be considered for this role, you should have a minimum of 2 years of utility construction experience, preferably as a crew leader or foreman. Additionally, you should possess at least 1 year of heavy equipment operating experience, including Hydro, Drill, Mini, and Plow. A valid driver's license with a clean driving record is necessary, and a CDL License (or the ability to obtain one) is required. This position starts at $24 an hour & is determined by experience & skillset. Join the ADB Companies team today and unlock endless opportunities for growth in the utility construction industry. Experience our supportive, safety-focused environment and be part of a company that values your well-being and career advancement.Licenses & CertificationsRequiredDL Class A CDL

Bus Mechanic: Class A or Class B CDL Required Full-time Location: San Antonio, TX Compensation: Mechanic Class A: $28.00 - $32.00 per hour Mechanic Class B: $25.00 - $28.00 per hour Coach USA is currently hiring full-time mechanics to work at our San Antonio Location!Coach USA has a new and exciting career opportunity for an experienced diesel mechanic at our San Antonio location. We are looking for an experienced mechanic to repair and inspect company equipment in a cost effective, safe and timely manner.What We Offer: Competitive wage based upon experience and certifications.Mechanic class A: $28.00 - $32.00 per hourMechanic class B: $25.00 - $28.00 per hourFull-time, flexible hours.Paid holidays, vacation and PTO.Full benefits package (medical, dental, vision, short term disability, life insurance, 401K).Tool and boot allowance.Uniform provided. Responsibilities: Perform basic, routine, and preventative maintenance bus repairs.Diagnose mechanical, electrical, and other breakdowns or failures.Repair or replace malfunctioning components, parts, and other mechanical or electrical equipment.Removal, installation, disassembly, and reconditioning of components of diesel engines.Interprets diagnostic test results accurately.Writes detailed inspection reports and repair plans.Collaborates with other diesel mechanics in all operational repairs.Demonstrate skills in advanced testing of all vehicle systems.Participate in maintenance training programs required for the job and career development.Completes test drives to make sure all repaired vehicles run correctly and safely.Uses power, machine, and hand tools safely in a maintenance environment.Follow all safety rules and regulations in the performance of work assignments. Requirements: High School Diploma or GED preferred.Be able to work in all types of weather conditions, including outdoors.Class A mechanic -Minimum 5 years’ Commercial experience on;Charter bus, commercial truck, and diesel repairCaterpillar, Cummins, and Detroit enginesClass B mechanic- Minimum 1 year commercial experience on;Charter bus, commercial truck, and diesel repairCaterpillar, Cummins, and Detroit enginesMust pass a pre-employment drug screen, physical and criminal background check.Familiarity with safety management.Possess your own set of tools to perform maintenance tasks.Must have a valid Class B Commercial Driver’s License (CDL).Ability to work weekends and holidays.Basic computer skills.Ability to communicate effectively in English. Qualifications: Experience in the transportation industry.Experience in the Motor Coach Industry.Associate degree in diesel technology preferred.Possess ASE and HVAC 609 Certifications preferred.Computer diagnostic skills a plus, but training is provided. Coach USA, INC. would love to discuss your qualifications for this position.To learn more about your next big career change! APPLY NOW!Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Overview: At Caliber Auto Care, our Purpose is Restoring the Rhythm of Your Life®. We are looking for individuals that have a desire to Do the Right Thing and thrive in a purpose-driven, team-driven culture that supports you to reach your full potential. If this sounds like you, please join us!The Automotive Technicians repair vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Perform mechanical repairs to vehicles thoroughly, safely, and profitably in a manner consistent with Caliber S.O.P., insurance partner and industry guidelines/standards. Effectively work with Body Technicians to assist with the repair process. Pay: 27 - 45 Flag Hours, DOE (Competitive Pay Depending on level of and Mechanical Experience and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Essential Job Duties Examines vehicles to determine extend of damage or malfunctions Test drive vehicles, and test components and systems, using equipment such as computerized diagnostic devices May repair, reline, replace and adjust brake systems and perform vehicle alignments Test and adjust repaired systems to meet manufacturers' performance specifications Repair and/or replace engine components, brake systems, steering and air bag systems Perform other related duties as assigned to ensure an efficient and effective repair Skill/Requirements: Must be at least 18 years of age Must have a valid driver's license and be eligible for coverage under Caliber's insurance policy (Not an excluded driver) Ability to effectively communicate with others Ability to read and understand instructions, written estimates and work orders Multi-tasking; adapts easily to fast-paced environment Personable, friendly demeanor with "World Class" customer service approach to internal and external customers Maintain a well-groomed appearance Physical Requirements/Working Conditions: The position is based in a normal shop environment. Frequent physical activity such as kneeling, bending, squatting, stooping, lifting above shoulders, standing for long periods of time during the repair of a vehicle is a part of daily activity as well as repetitive tasks involving hand and arm motion and lifting objects over 50 pounds. Must be able to push/pull parts carts and cars with assistance. The working environment consists of: Exposure to fumes, chemicals, dust, along with high levels of noise as well as regularly exposed to working near moving mechanical parts. Caliber enforces the mandatory requirement to wear protective equipment. Must have manual dexterity to operate equipment. Subject to weather conditions both inside and outside.Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity:At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Performing basic welding activities to effect repairs on facilities and equipment.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems.Perform and assign all preventive maintenance on facility and production assets.Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule.Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required.Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours.Assume responsibility for all shifts in the maintenance department.Oversee and implement all maintenance related regulatory and environmental compliance requirements.Assume responsibility for all aspects of safety within the maintenance department.Perform Confined Space and Lockout / Tagout procedures where appropriate.Monitor training status of technicians and provide time for required training as needed.Utilize a Computerized Maintenance Management System.Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor.Train and develop maintenance partners.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred.Must be at least 21 years of age.Valid driver’s license and a safe driving record are required.Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required.Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered.Minimum of 2 years of experience supervising maintenance personnel is preferred.Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required.Proficiency in Microsoft Office skills is required.Experience in Hand & Power tools is required.Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPAY FROM $20-$45/HR DOESIGN ON BONUS DOEWHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:• Competitive Starting Pay• Paid Training• Global Advancement Opportunities• Company Vehicle (as applicable)• Referral Bonuses• Comprehensive Benefits• Medical/Dental/Vision insurance• Health Savings Account (HSA)• Life Insurance• 401(k) savings plan with company match• Short-Term and Long-Term Disability• Employee Assistance Program• Wellness Program• And more!Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.Do you have HVAC experience We are looking for HVAC systems serviceman who have worked in residential, light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry.You may be required to pass a satisfactory examination as to your special skill.What you will doWe are looking for a skilled HVAC systems serviceman who have worked in residential, light commercial and/or heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do itWe provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Servicemen must have practical working experience in residential, light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look forRequiredHigh School Diploma or equivalent.Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant CertificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

**SkillBridge Candidates Only**Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. At our new San Antonio Training Center, you will be trained by the world's best. Bring your mechanical aptitude, a strong work-ethic, and a hunger for learning - we'll teach you the rest.What's it like at StandardAeroCollaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on.Our Turbine Engine Mechanic Training Program is a 12 week comprehensive paid training program that provides format, structure and standards for employee training & development. We have a 'learn-by-doing' philosophy so you will be frequently moving between theory, lab and instructor led practical on-engine training.Upon completion of the program, you will be assigned to one of our engine programs in San Antonio.What you'll learn:Repair and overhaul of gas turbine engines Inspection of engine modules and engine components Safety practices and aviation regulations Requirements for the ideal candidate include:High School Diploma or equivalent education. Minimum of 2 years job related training/experience is preferred. Ability to read, write, and communicate verbally in English.Ability to read and interpret manuals, technical drawings, and blueprints to determine proper operating conditions. Ability to lift up to 50lbs without assistance.Ability to stand for extended periods of time.Ability to multitask and prioritize tasks in a high pace environment.SkillBridge Specific Information: This is an unpaid fellowship through the Department of Defense (DoD) SkillBridge Program. The fellow selected for this role will not receive compensation or benefits from StandardAero and will not be an employee, agent, or contractor of StandardAero but rather will remain an employee of the DoD and will receive compensation and benefits through the DoD.DoD SkillBridge Eligibility Requirements: Has served at least 180 days on active dutyCan participate within the last 6 months of separation or retirementWill receive an honorable dischargeHas taken any service TAP/TGPSHas attended or participated in an ethics brief within the last 12 monthsReceived Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of the fellowship.What makes a good fit for StandardAeroWe love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture.Raising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

Requisition Number:24318When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity:At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Performing basic welding activities to effect repairs on facilities and equipment.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems.Perform and assign all preventive maintenance on facility and production assets.Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule.Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required.Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours.Assume responsibility for all shifts in the maintenance department.Oversee and implement all maintenance related regulatory and environmental compliance requirements.Assume responsibility for all aspects of safety within the maintenance department.Perform Confined Space and Lockout / Tagout procedures where appropriate.Monitor training status of technicians and provide time for required training as needed.Utilize a Computerized Maintenance Management System.Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor.Train and develop maintenance partners.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred.Must be at least 21 years of age.Valid driver’s license and a safe driving record are required.Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required.Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered.Minimum of 2 years of experience supervising maintenance personnel is preferred.Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required.Proficiency in Microsoft Office skills is required.Experience in Hand & Power tools is required.Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Paid Drive TimeEnjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.**BATTLE PAY!**AN ADDITIONAL $10 PER HOUR during the peak summer season! Don't miss out on this rewarding opportunity!Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay from $35 - $50/hour DOEWHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: Minimum of 5+ years of commercial refrigeration experience is required.High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 142 rates.Comprehensive benefits package provided by the UA Local 142.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doDo you have HVAC AIR-COOLED CHILLER experience We are looking for HVAC systems mechanics who have worked in commercial and industrial markets to join our team working with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a factory representative to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in commercial mechanical equipment and diagnostics. Responsibilities may include but not limited to repairs of air-cooled, centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired5 years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.Computer savvy with good verbal and written communication skills.EPA Universal Refrigerant CertificationPreferredExperience with YORK, and air-cooled Centrifugal applied equipment.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requisition Number:24318When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest. Diversity:At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs.Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.Performing basic welding activities to effect repairs on facilities and equipment.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems.Perform and assign all preventive maintenance on facility and production assets.Follow blueprints, schematics, operations manuals, manufacturer’s instructions, and engineering specifications using a documented schedule.Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required.Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours.Assume responsibility for all shifts in the maintenance department.Oversee and implement all maintenance related regulatory and environmental compliance requirements.Assume responsibility for all aspects of safety within the maintenance department.Perform Confined Space and Lockout / Tagout procedures where appropriate.Monitor training status of technicians and provide time for required training as needed.Utilize a Computerized Maintenance Management System.Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor.Train and develop maintenance partners.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred.Must be at least 21 years of age.Valid driver’s license and a safe driving record are required.Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required.Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered.Minimum of 2 years of experience supervising maintenance personnel is preferred.Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required.Proficiency in Microsoft Office skills is required.Experience in Hand & Power tools is required.Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 3 years of practical working experience on air cooled and/or water-cooled chillers or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians and when necessary, provide on the job training.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requisition Number:24318When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doAs a controls systems technician with Johnson Controls you will perform assigned system commissioning using Johnson Controls configuration and commissioning tools.You will troubleshoot and resolve basic HVAC mechanical, electrical, and control problems and respond to basic warranty calls.How you will do itLoads system-level controller software.Performs basic commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents change and provide information for as built documentation.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look for1-3 years of BMS experience.Basic computer skills.Demonstrated technical aptitude.Able to use hand and power tools (i.e., drills, saws, etc.)Attention to detail.Good communication and listening skills.Knowledge of mechanical HVAC systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doResponsible for designing, installing, and servicing the software and hardware for integrated applications following governing codes and standards. Design, install and service various types of communication applications to include wireless and LAN/Wan based security, fire, video surveillance and access control solutions following governing codes and standards. How you will do it Design installs and services the software and hardware for integrated systems/applications without supervision.Completes system and network programming as required.Locates and clears trouble with damaged equipment or wiring, readjusts equipment, repairs, or replaces inoperative equipment and tests for proper operation.Maintains a positive liaison between Tyco IS and the customer to ensure proper communication is filtered through the Tyco IS and the customer organization while maintaining a high degree of professionalism and customer satisfaction.Coordinates testing and final acceptance of system/application with the customer, police, fire, or other agencies as required.Ensures proper application of systems products to meet customer requirements. Responsible for engineering, configuration, installation, maintenance, and support of data/video communication networks including wireless and IP solutions.Develop and provide training and technical support tools for users with varying levels of IT, Security and Fire knowledge and competence.Construct and maintain up-to-date and accurate documentation of security, fire and network configurations, diagrams, and programming records. Create detailed security, fire, and networked server documentation, including physical diagrams, logical diagrams, IP address schemes and asset management and database designs.What we look for RequiredAssociate degree preferred or equivalent work experience.High School Diploma required.Must have a valid driver license.Variety of Security, Fire, and communication manufacturer product certifications.State and Local Certifications as required.Have the aptitude and or the years of experience capable of designing, installing, inspecting, and repairing integrated systems/applications.Have the aptitude and experience in wireless and LAN/WAN network engineering using Cisco products including Layer 2/3 Switches and Routers.Experience with and solid working understanding of Cisco switches, routers, IOS software and diagnostics.Good working knowledge of required technical hardware such as Cisco Routers, CSU, DSU, bridges, multiplexers, servers, and switches; knowledge of building, configuring, and troubleshooting campus networks and remote access networks using Cisco Catalyst multi-layer switching technologies over high-speed Ethernet and Cisco routers connected to wired and wireless LANs.Excellent oral and written communication skills.Excellent organizational skills. Manage multiple tasks and resources.Client/Server diagnostic support skills to understand how applications communicate within LAN/WAN/MAN networks and over the Internet.Good understanding of IP Backbone Architecture, TCP/IP protocol.Strong analytical and troubleshooting skills.Ability to effectively interact with internal organization and customer representatives and be a team player at all levels.Possess a high level of PC literacy.Must possess advanced knowledge of designing, installing, inspecting, and repairing integrated systems/applications.Ability to work independently or in a team environment.Interpret/read blueprints, building plans, electrical, schematics and sprinkler/fire plans to complete equipment installations, repairs, inspections, and clear troubles.Ability to occasionally travel out of town to customer locations and training.Must be available after hours to provide off-site software and hardware support and if required on-site support to resolve system failures for integrated applications. PreferredProject Management will be an optional requirement. Fire and Project Management will be an optional requirement. Cisco Certifications (CCNA or higher) and SE or FE, MCSE Preferred unless required for a customer need than this would be required.NICET Fire Level 1 and 2 required, 3 preferred.NICET Access Control and Close Circuit TV preferred.Experience with Software House, American Dynamics, Bosch, DMP, and other Enterprise Level Access Control systems, CCTV, and IP video systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Additional Job DescriptionWhat you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.How will you do itMechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired· Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.· Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.· Computer savvy with good verbal and written communication skills.Preferred· Five (5) years of Commercial and or industrial work experience in the HVAC industry· Refrigeration Certification preferred.· EPA Universal Refrigerant CertificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doFire Sprinkler Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action, deluge, and foam suppression systems, as well as fire pumps and back flow devices. Installer III employees are also responsible for the execution of the installation project plan including equipment delivery, accurately forecasting installation hours, anticipating potential challenges, and properly securing all Johnson Controls Fire Protection/Grinnell tools and equipment at the end of each work period to prevent damage or loss.How you will do itApplies judgment based on practice and precedence.May allocate work as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager.Frequently resolves problems through the research of multiple alternatives. Must maintain proper documentation for all work performed.May review project drawings to obtain all facts necessary to perform installation activities according to specifications.Must be able to work alternative shifts or weekends to meet customer and/or job requirements.Overtime may be required.Must adhere to all company safety policies and procedures.May be required to perform Inspections. What we look forRequired Minimum 5 years documented experience in installation and service of fire sprinkler systems.High School Diploma or equivalent required.Follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Read and understand construction blueprints, diagrams, and specifications used in installation activities.Ability to work flexible hours.Ability to adhere to, implement, and always follow safety guidelines and procedures.Excellent communication skills, using tact and diplomacy when dealing with customers and team members.Strong organizational skills, positive attitude, and ability to learn quickly.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doFire Sprinkler Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action, deluge, and foam suppression systems, as well as fire pumps and back flow devices. Installer I employees are also responsible for the execution of the installation project plan including equipment delivery, accurately forecasting installation hours, anticipating potential challenges, and properly securing all Johnson Controls Fire Protection/Grinnell tools and equipment at the end of each work period to prevent damage or loss.How you will do itApplies judgment based on practice and precedence.May allocate work as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager.Frequently resolves problems through the research of multiple alternatives. Must maintain proper documentation for all work performed.May review project drawings to obtain all facts necessary to perform installation activities according to specifications.Must be able to work alternative shifts or weekends to meet customer and/or job requirements.Overtime may be required.Must adhere to all company safety policies and procedures.May be required to perform Inspections. What we look forRequired Minimum 2 years documented experience in installation and service of fire sprinkler systems.High School Diploma or equivalent required.Follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Read and understand construction blueprints, diagrams, and specifications used in installation activities.Ability to work flexible hours.Ability to adhere to, implement, and always follow safety guidelines and procedures.Excellent communication skills, using tact and diplomacy when dealing with customers and team members.Strong organizational skills, positive attitude, and ability to learn quickly.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Contact customer representative and ascertain equipment/systems problems.Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications.These include but are not limited to wet (steel, copper and CPVC), dry, pre-action, deluge, and fire pumps.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc., to diagnose and repair equipment.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals.Exhibit effective customer service skills by consistently communicating with the district staff and customers to ensure complete customer satisfaction.Electronically complete Service Acknowledgements with proper coding and obtain customer’s signature.Participate in a scheduled On-call rotation.Perform other duties as assigned.What we look for5 years of documented experience in Fire Sprinkler/Suppression industry.Must possess and retain current (F Card) State Fire Protection License or Journeyman License valid.Must be willing to travel. Able to participate in an on-call rotation schedule. Overnight travel may be required.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.High School Diploma or equivalent requiredAbility to follow verbal and written instructions Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrate a high level of customer service Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements. PreferredNICET Certification - ability to acquire within the 1st year.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayOn The Job Paid TrainingTuition ReimbursementUnlimited Career PathGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd more!What you will doUnder general direction, perform preventive maintenance, repair, installation and replacement of HVAC mechanical equipment.Assists branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and following operational processes.Providing Level 1 technical support and assisting with technical development for others.Ensures work is being performed in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics.Properly completes all required project and service documentation.How you will do itAdheres to all Johnson Controls and customer safety standards.Provides safety leadership and instruction to all Technicians.Provides safety awareness and instruction to subcontractors on Johnson Controls work sites.Recognized as a Leader by peers while being a coach and mentor within the branch.Escalation points on technical issues and provides on-the-job training for other techniciansProvides solutions to others on very complex system problems by either troubleshooting or advising how to resolve problemsEscalation points from the branch to the technical resource team.Viewed as an expert in a given field by both employees and customers.Assists management with assuring proper field operational disciplines of other Technicians are followed.Regularly provides input on development and training needs of the branch.Assists with the identification of material needs required for service delivery.Assists the Service Manager or Customer Service Agent with identifying and scheduling individuals with the correct skills and knowledge to perform repairs or installation.Communicates with customers upon arrival and before leaving the work site.Ensures high levels of customer satisfaction Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs.Manages assigned work to meet a professional level of execution, on-time and to the customer.satisfactionProvides consultant level services for customers related to building system repairs and enhancements.Ensures ultimate customer satisfaction levels with assigned customers.Conducts self-study (reading, research, and practice) to improve and maintain technical proficiency.Completes all training and certifications as required by the company.What we look forRequiredIn addition to the technical requirements of the given field, Technical Team Leads need experience where strong leadership activities have been demonstrated.Ability to act independently and to coordinate the work of other employees and contractors on a customer site.Effective interpersonal skills to represent the company to customers and other outside contacts.Able to explain technical information to technical and non-technical people.Additional Job DescriptionAdditional Job DescriptionJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doResponsible for meeting customer expectations while performing quality inspections.How you will do itPerform routine inspections and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look forRequiredRME-I License2-5 years documented experience in sprinkler systems.Experience with wet, dry, pre-action, deluge, foam systems, fire pumps and pre-action systems.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Experience with hand tools and multi-meter usageDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Demonstrate a high level of customer service.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to obtain and retain any licenses that are required by National, State and Local codes.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level II certificationJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doResponsible for meeting customer expectations while performing quality installations.How you will do itPerformroutine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Learn to complete Install Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured installation schedule.Complete assigned installations on time.Perform other duties as assigned.What we look forRequiredAlarm Installer License required.Must obtain Texas Fire Alarm License withing one year of start date.Able to obtain and obtain and retain any licenses that are required by National, State and Local codes.Certification desire: Ccure, Lenel, Kantech, Amag, Brivo, Hirsch, Genetec, ExacqVision, Bosch VMS, Bosch Intrusion, DMP Intrusion and Vista 128/250.5+ years of experience.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools, multi-meter usage and handheld power tools.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including nights, and occasional weekends to meet customer requirements.Occasional travel may be required.Demonstrate a high level of customer service.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and ability to learn quickly.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThe candidate will maintain and grow a route servicing existing fire extinguisher, kitchen hood, e-light customers. Inspect, service, repair and install 2 or more suppression product lines, emergency lights, fire extinguishers, and pre-engineered systems according to safety requirements and manufacturer's specifications.How you will do itMake recommendations based on manufacturer's specification and state/local codes.Identify deficiencies. Quote, sell, and repair on-site.Up-sell existing customers new product offerings and services to meet compliance with current fire code regulations.Sell new accounts on the route based on the same compliance criteria.Meet or exceed quotas set forth by the direct supervisor.Call on potential customers to offer suppression products and services.What we look forRequiredCompletion of High School diploma or equivalency.FEL – K or FEL – A License requied by Texas State board of insurance.Will participate in On-call rotation.A valid motor vehicle license is required.Demonstrated mechanical aptitude and basic computer knowledge.Ability to transport equipment and tools weighing up to 40 lbs.Ability to work in restricted areas and adept at maneuvering ladders.Ability to demonstrate a high level of customer service.Effective communication skills with both internal and external customersPreferredKnowledge of NFPA standards and dangerous goods is an asset.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sicktime –15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out:A Day in a Life atJohnson Controls What will you do Under general direction, acts as the on-site project leader to plan, implement, and complete control systems projects with assigned customers. Performs or delegates tasks as the need arises to implement and fully complete assigned projectsincluding:hardware design, system programming, installation coordination, system and network commissioning and project closeout. Responsible for the overall financial results of assigned projectsincluding:costs, project billings, and collections. Maintains an effective balance between customer happiness and project financial results. Actively pursues selling change orders. Coordinates communication with the customer during all phases of the project. Ensureaccurateopera execution of warranty.Provideswork direction to subcontractors, electrical installers, technicians, designers, and administration as vital.Ensures work performed is in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics. Adheres and ensuresJohnson Controlsstaff and subcontractors adhere to all safety standards. How will you do it Completes typical installation hardware design and software programming using established standards asrequired. Providesdetailed information to communicate design and operation to customers,Johnson Controlsstaff and subcontractors. Actively pursuesadditionalwork through change orders. Evaluates the contractual scope of work and the impact of client issued bulletins, field directives and/or scheduling changes. Communicates both technical andbusiness relatedissues with the clients. Manages theselection, ordering,budgetand delivery schedule of materials to beprocuredfor the projects assigned. Secures pricing and availability from outside vendors and suppliers, mechanical and electrical subcontractors including scope,termsand conditions. May request several bids in pricing process.Oversees subcontractor payment and billing processes. Providesjobsite coordination for panel and field device physical locations. Ensures installation isin accordance withJohnson Controlsliterature and project requirements. Manages and completes the loading, device verification, and commissioning of all system controllers as the need arises. Validates complete system functionality and resolves issues with subcontractors and others to ensure proper operation.Providesaccurateprojectas-builtand commissioning documentation. Manages costs,billingsand collections. Complete project billings ina timelyandaccurateformat to the client. Maintains profitability goals and positive cash flow. Schedules monthly project cost in cost accounting system. Responsible for project cost hitting projects as scheduled. Providescoaching, mentoring and technicalassistanceto System Technicians, Electrical Installers and System Designers. Providestechnicalassistanceto subcontractors. Ensures that delegated tasks are done accurately,on-time, billed, within budget and within scope of the contract. Optimally communicates the status of projects to management as the need arises andprovidesmonthly forecasts of revenue, costs, and gross margin. Sends warranty letter to JCI customer upon meaningful completion of project and ensuresaccurateexecution of warranty. Develops project plans and coordinates the required resources to ensureaccurateand efficient installation and completion of assigned projects. Performs site-specific training for owner/operator on the total system in full or withassistance. Ensures owner/operator has been trained.Providesproper documentation and manuals for system operation. Develops andmaintainsviablelong-term relationships with contractors, clients,consultantsand subcontractors. Attends job progress meetings asrequired. Adheres to safety standards. High degree of regard to employee and subcontractor safety. What we look for Required Two years of field experience or four years of equivalent related field experience in the HVAC industryMust have relevant technicalhands onexperience in systems design and commissioning of digital HVAC controls systems. Must have the ability to communicate technical material to a non-technical audience. Mustdemonstratethe ability to perform work independently.Preferred Strong digital literacy. Technical degree a plusMust have knowledge of control theory and HVAC systems. Knowledge of projectaccounting,costing principals and contracting preferredJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.