SEARCH
GO
Skilled & Trades Jobs
Full Time
3/5/2025
Converse, TX 78109
(6.7 miles)
$18.00 / hr
Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized
Full Time
4/1/2025
San Marcos, TX 78666
(29.7 miles)
JOIN OUR WAREHOUSE TEAM! Ready to build a career with a company that’s leading the foodservice industry Location: Buda, TX We are hiring for a Fleet Mechanic Schedule: Monday- Friday 1:30pm-10:00pm OT as required BASIC PURPOSE Mechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Mechanics will also be responsible for the documentation, completion, and to keep current the maintenance logs for all repairs and parts used daily. The position will be required to perform road rescue as needed.ESSENTIAL DUTIES AND RESPONSIBILITIESTroubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.RELATIONSHIPSInternal: VP of Operations, Transportation Manager, various other USF personnelExternal: Vendors, Parts and equipment delivery personnelQUALIFICATIONSEducation/Training:High school diploma or equivalent required.Related Experience/Requirements:A valid Class-A CDL license and DOT certification preferred.Must have (5) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (3) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when neededCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $37 and $42 per hour and as applicable, this role will alsoreceive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.
Full Time
3/25/2025
San Antonio, TX 78249
(20.9 miles)
Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1
Full Time
4/4/2025
San Antonio, TX 78208
(13.8 miles)
At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team!What you get to do:Conduct daily ride inspectionsPerform preventative maintenance and scheduled carpentry servicesProvide support in troubleshooting and carpentry repairs with rides and facilities.Provide excellent service to guests and team membersConsistently practice safe work habits including, but not limited to the use of personal protective equipment, lifting and reporting of unsafe situationsWhat it takes to succeed:Must be at least 18 years of age.Must have a high school diploma or equivalent.Must have extensive knowledge in operation of a wide range of power and hand tools (i.e. table saw, ban saw, panel saw, routers, planers, compound miter saws).Must have at least three (3) years working knowledge in carpentry trade.Must be able to read and understand blueprints.Must have basic math skills.Must have a valid driver’s license and the ability to obtain a SEA driver’s license.Must be able to quote new projects and work with supply vendors on ordering the correct materials to complete a given project.Must be able to stand and walk for prolonged periods of time in extreme weather conditions.Must be able to walk uphill 35-40 degree slopes and must be able to work on heights above 150 feet.Must be able to frequently lift, push, and pull a minimum of 75 pounds.Must have excellent written and verbal communication skills in the English language.Consistently practices safe work habits including but not limited to the use of personal protective equipment, lifting and reporting of unsafe situations.Must be willing to comply with all SEA grooming guidelines and employment standards.Must be willing to work a flexible schedule that includes weekdays, weekends, evenings, nights and holidays.Compensation: $26.00 per hourThe perks of the position:Paid Time OffComplimentary Park Tickets and PassesPark Discounts on Food and MerchandiseMedical, Dental, and Vision Insurance401K Retirement planVoluntary InsuranceLife InsuranceDisability BenefitsTuition ReimbursementDependent and Health Care Flexible Spending AccountsEmployee Assistance ProgramLegal Assistance PlanEEO Employer:SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.
Full Time
3/25/2025
San Antonio, TX 78205
(15.9 miles)
JOB DESCRIPTIONPersons employed as a GSE Mechanic is expected to:Inspect and maintain ground support equipment used in operations.Troubleshoot, repair and/or overhaul ground support equipment.Check and service ground support equipment with fuel, water, oil and hydraulic fluid.Diagnose problems using test equipment and applicable manuals.Build and assemble machines or mechanical components according to requirements.Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues.Conduct repairs aiming for maximum reliability.Perform thorough maintenance on machinery, equipment and systems.Clean and apply lubricants to machinery components.Replenish fluids and components of engines and machinery.Provide consultation on correct maintenance and preventative measures to machine or vehicle users.Keep logs of work and report on issuesCompletion of GSE paperwork as required.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert).RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Ability to read and comprehend instructions, short correspondence and memos.Write routine business correspondence.Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees.Deal with problems involving several concrete variables in standardized situations.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Excellent knowledge of machinery and hydraulic, electrical and other systems and their componentsAptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers)Ability to follow established procedures and practices and read instruction, blueprints etc.A strong commitment to all health and safety guidelinesVery good communication skillsA problem-solving abilityVery good physical strength and staminaQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experienceMinimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior GSE or heavy equipment experience preferred.Must have your own tools.Must possess valid driver’s license.Certification from a vocational school or completion of apprenticeship is a definite plus.Valid certification (ASE) preferred.Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in the maintenance and repair of machinery and equipment.Perform routine inspections and preventive maintenance tasks.Troubleshoot and resolve mechanical issues.Collaborate with team members to ensure efficient operations.Maintain accurate maintenance records and reports.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to work independently and as part of a team.Willingness to learn and adapt to new technologies.Good communication and organizational skills.Basic knowledge of safety protocols and procedures.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical requirements include standing, walking, bending, and lifting up to 50 pounds regularly.What We OfferStarting Pay $22.25 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidayEqual Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/1/2025
San Marcos, TX 78666
(29.7 miles)
Type of Requisition:RegularClearance Level Must Currently Possess:NoneClearance Level Must Be Able to Obtain:NonePublic Trust/Other Required:NoneJob Family:ConstructionJob Qualifications:Skills:Civil Construction, Construction Services, ExcavationsCertifications:NoneExperience:1 + years of related experienceUS Citizenship Required:NoJob Description:Construction Worker IIIThis position reports to a Construction Manager or Construction Supervisor, and is responsible for the daily civil construction for a range of wireless locations. These projects typically involve construction services related to wireless telecommunication systems. This will include generator installations, cabinet installations, concrete pads, foundations, framing, fencing, etc.Position ResponsibilitiesSupervise, Lead, and Assist with all trenching, conduit installation, concrete work, wire installation, ATS/MTS/Camlock installation. Work must be completed in a safe, professional manner.Perform daily on site Safety and Quality inspections.Clearly understands, complies with and enforces Company and job safety requirements to include, but not limited to: OSHA, Federal and State laws and/or regulations.Document all work each day with photos and explanation. Proper closeouts must be supplied for all jobs before they can be signed off as complete.Review the scope of work and construction drawings with all crew membersReport any deviations from the scope of work/construction drawings to the Construction ManagerThe likely hourly rate for this position is between $29.75 - $40.25. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:75-100%Telecommuting Options:RemoteWork Location:USA TX San MarcosAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans
Full Time
4/4/2025
San Antonio, TX 78208
(13.8 miles)
What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.
Full Time
4/4/2025
Bulverde, TX 78163
(18.0 miles)
Auto Body Technician $70K-$175K Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision Paid WeeklyContinuous TrainingSupportive Team CultureCompany match 401KMedical/Dental/VisionPaid Time Off - 6 Paid HolidaysRewarding Work Responsibilities Complete disassembly of vehicle to assist Collision Estimatorsin assessing damage to prepare a 100% Repair PlanEnsure all needed repairs identified to eliminate supplements and minimize repair timePlan work procedure: follow work order for all operations listedRemove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damageMend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are paintedOperate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.)File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept.Repair or replace defective partsEnsure all needed repairs identified to eliminate supplements and minimize repair timeInspect and test drive repaired vehicles to check for compliance with safety and quality standardsPerform other related duties as assignedComply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications Must be at least 18 years of ageI-CAR / ASE certifications preferred2-3 years’ collision repair experience preferredValid Driver's License RequiredCustomer-focused attitude with the ability to work well in a team environmentAbility to read and comprehend written instructions and informationSuccessful completion of background check required Behaviors/Competencies: Integrity-Respect and accountability at every level and every interactionCustomerService-Provide the highest level of customer service while building customer satisfaction and retentionInnovation-Develops and displays innovative approaches and ideas to our businessTeamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, pleasee-mail or call . This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position.
Full Time
4/1/2025
San Antonio, TX 78251
(25.0 miles)
COMPANY SUMMARY: SPATCO Energy Solutions has been the leader in the fueling infrastructure industry since 1935. We provide a complete line of equipment and services for storing, pumping, mixing and measuring petroleum and industrial liquids. Our customers come from a variety of industries including retail fueling stations, commercial and government fleets. The services we provide to our customers and the community is essential and we are growing! SPATCO currently operates 17 branches with a dedicated training facility in North Carolina and growing service satellites throughout the Southeast. Our goal is to provide top notch customer service. Our experienced technicians are committed to customer service excellence which will advance them and SPATCO in the petroleum industry. Even as an experienced technician you will receive updated training and certifications to help advance your career in the Petroleum industry. Our experienced service technicians will work side by side with branch managers, dispatchers and other experienced technicians and trainees. The growth of SPATCO and its employees depends on our ability to service our customers by working as a team. This may include being paired with a trainee to assist them in completing their training and certifications. This position does not work a typical 8-5 shift, hours may vary based on workload and customer need. Responsibilities: Troubleshoot and repairs gasoline dispensing units (such as: Gilbarco, Dresser Wayne, Gasboy, and Bennett).Troubleshoot and repair of electronic POS (Point-of-Sale) Systems (such as: VeriFone, Gilbarco and NCR).Install, program and tests new petroleum equipment.Analyze electrical and mechanical problems and provide repairs as required.Perform scheduled repairs and preventative maintenance to fueling systems.Communicate with customers and explain technical issues in a non-technical manner. Experience, Competencies and Education High School Diploma or GED.Valid State Issued Driver's License and good driving record.At least 2+ years' experience troubleshooting, repairing and maintaining gasoline dispensing units including dispenser hydraulics and submerged pump units.Hold valid dispenser certification(s).Ability to work outdoors in all types of weather; daily local travel; lifting 50-75 lbs.
Full Time
4/1/2025
San Antonio, TX 78208
(13.8 miles)
Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
3/8/2025
SAN ANTONIO, TX 78216
(13.5 miles)
Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance.Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraftOperate and maintain UPS equipment safelyRun, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do soDetermines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation RegulationCompletes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and completeServices and inspects aircraft, components, and related equipmentEnsure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover logFollow all Maintenance Department policies and proceduresKeep a clean and orderly work environmentMake recommendations to improve functions within the Maintenance DepartmentAttend UPS assigned trainingPerform other duties as assigned by Line Maintenance Supervisor or the Director of MaintenanceRequired QualificationsMust have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver’s license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts CataloguesFederal Aviation Administration required Drug Testing Information (FAA):As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107).Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs.Starting Pay:$30.13Benefits: Competitive weekly payMedical, dental, and vision after waiting periodDefined-benefit pension plan401(k)Paid vacationPaid holidaysPaid Sick and Family and Medical Leave time as required by lawDiscounted Employee Stock Purchase Program Employee Assistance Program*This job post is for SAT gateway only*Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.
Full Time
3/28/2025
San Antonio, TX 78208
(13.8 miles)
KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment
Full Time
3/25/2025
San Antonio, TX 78249
(20.9 miles)
Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1
Full Time
4/4/2025
San Antonio, TX 78208
(13.8 miles)
At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team!What you get to do:You willroll up your sleeves, get your hands dirty and perform carpentry work in order to keep our parks looking sharp.Specifically, you will:Perform all functions of general carpentry work for in-park builds, repairs, installations, providing a safe environment for guests and employees.Select proper materials for jobsDependable performance in terms of attendance, acceptance of assignments, and strict adherence to all safety policies and requirementsCommunicate professionally and effectively with Ambassadors, Vendors and our GuestsPerform other duties as assignedWhat it takes to succeed:High school diploma or equivalent3+ years of onsite experience in the carpentry tradeExperience with cabinet building and framing, fabrications of solid surface and laminate countertops, roof repairs, drywall installation, concrete work, and more.Ability to work with blueprints or in-depth sketchesAbility to operate and maintain power and hand tools and other equipment in good safe conditionExcellent written and verbal communication skillsPossess basic mathematical skillsWork at heights up to 100 feet, work on scaffolding up to 24 feet, and ability to climb and work off of laddersAbility to lift 50 pounds and push/pull up to 100 pounds with assistanceAbility to work indoors and outdoors, in varying weather, to include extreme heat. Position may be exposed to fumes, dust, odors, loud noises/vibrations and cold/heat temperature extremesPerform cleaning duties, including use of cleaning chemicalsWork a flexible schedule/hour based on business need, to include opening, mid-, and closing shifts; nights, weekends, and holidaysThe perks of the position:Paid Time OffComplimentary Park Tickets and PassesPark Discounts on Food and MerchandiseMedical, Dental, and Vision Insurance401K Retirement planVoluntary InsuranceLife InsuranceDisability BenefitsTuition ReimbursementDependent and Health Care Flexible Spending AccountsEmployee Assistance ProgramLegal Assistance PlanEEO Employer:SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in the maintenance and repair of mechanical equipment.Perform routine inspections and preventive maintenance.Troubleshoot and diagnose mechanical issues.Follow safety protocols and procedures.Collaborate with team members to ensure efficient operations.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to work independently and as part of a team.Willingness to learn and adapt to new technologies.Good communication and organizational skills.Commitment to safety and quality.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical Demands of the JobAbility to lift and carry up to 50 pounds.Frequent standing, walking, bending, and reaching.Ability to work in various positions, including kneeling, crouching, and climbing.Use of hands and fingers to handle or feel tools and equipment.What We OfferStarting Pay $22.25 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/4/2025
San Antonio, TX 78208
(13.8 miles)
Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe.You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time - 10+ days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out:A Day in a Life at Johnson Controls:What you will doAs a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning.This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects.You will work directly on multiple project teams to assist the Project Managers and Field Technicians.How you will do itLoads system-level controller softwarePerforms advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentationKeeps management and JCI contractor or customer informed of job progress and issuesCalibrates systems requiring basic electronic test equipmentCompletes administrative tasks including but not limited to time sheets, expense reports, and on-site documentationDocuments changes and provides information for as-built documentationCommunicates with the JCI contractor or customer upon arrival and before leaving the work siteFollows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look for Advanced computer skills (Metasys preferred)Advanced knowledge of electrical testing and commissioning toolsStrong documentation acumenGood communication and listening skillsAdvanced knowledge of mechanical HVAC systemsLow voltage/120-volt wiring skills preferredA valid driver’s license, with no major or frequent traffic violations
Full Time
4/1/2025
San Antonio, TX 78208
(13.8 miles)
Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on electrical systems and equipment.Troubleshoot and repair electrical issues to minimize downtime.Install and upgrade electrical systems and components.Ensure compliance with safety standards and regulations.Collaborate with other maintenance team members to optimize plant operations.What Are We Looking ForStrong knowledge of electrical systems and components.Ability to read and interpret electrical schematics and blueprints.Proficiency in using electrical testing and diagnostic tools.Excellent problem-solving skills and attention to detail.Effective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical DemandsAbility to lift and carry up to 50 pounds.Frequent standing, walking, bending, and reaching.Ability to work at heights and in confined spaces.Manual dexterity to handle tools and perform tasks requiring fine motor skills.What We OfferStarting Pay $28.00 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/1/2025
San Antonio, TX 78208
(13.8 miles)
Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform electrical maintenance and repairs on plant equipment.Troubleshoot and diagnose electrical issues efficiently.Ensure compliance with safety and operational standards.Maintain accurate records of maintenance activities.Collaborate with team members to optimize plant performance.What Are We Looking ForProficiency in electrical maintenance and repair.Strong problem-solving and diagnostic skills.Effective communication and teamwork abilities.Commitment to safety and quality in all tasks.Flexibility to adapt to changing priorities and schedules.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical Demands Ability to lift and carry up to 50 pounds.Prolonged periods of standing, walking, and working on equipment.Frequent bending, kneeling, and reaching.Use of hands and fingers to handle or feel tools and equipment.Ability to work in confined spaces and at heights.What We OfferStarting Pay $28.00 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/1/2025
San Antonio, TX 78208
(13.8 miles)
Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredClimb ladders that extend up to 24 ft. in heightsCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Bosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentSecuritas offers comprehensive benefits includingHighly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform electrical maintenance and repairs on plant equipment.Troubleshoot and diagnose electrical issues efficiently.Ensure compliance with safety and operational standards.Maintain accurate records of maintenance activities.Collaborate with team members to optimize plant performance.What Are We Looking ForProficiency in electrical maintenance and repair.Strong problem-solving and diagnostic skills.Effective communication and teamwork abilities.Commitment to safety and quality in all tasks.Flexibility to adapt to changing priorities and schedules.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical Demands Ability to lift and carry up to 50 pounds.Prolonged periods of standing, walking, and working on equipment.Frequent bending, kneeling, and reaching.Use of hands and fingers to handle or feel tools and equipment.Ability to work in confined spaces and at heights.What We OfferStarting Pay $28.00 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform electrical maintenance and repairs on plant equipment.Troubleshoot and diagnose electrical issues efficiently.Ensure compliance with safety and operational standards.Maintain accurate records of maintenance activities.Collaborate with team members to optimize plant performance.What Are We Looking ForProficiency in electrical maintenance and repair.Strong problem-solving and diagnostic skills.Effective communication and teamwork abilities.Commitment to safety and quality in all tasks.Flexibility to adapt to changing priorities and schedules.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical Demands Ability to lift and carry up to 50 pounds.Prolonged periods of standing, walking, and working on equipment.Frequent bending, kneeling, and reaching.Use of hands and fingers to handle or feel tools and equipment.Ability to work in confined spaces and at heights.What We OfferStarting Pay $28.00 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
Full Time
4/1/2025
Schertz, TX 78154
(2.2 miles)
Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform electrical maintenance and repairs on plant equipment.Troubleshoot and diagnose electrical issues efficiently.Ensure compliance with safety and operational standards.Maintain accurate records of maintenance activities.Collaborate with team members to optimize plant performance.What Are We Looking ForProficiency in electrical maintenance and repair.Strong problem-solving and diagnostic skills.Effective communication and teamwork abilities.Commitment to safety and quality in all tasks.Flexibility to adapt to changing priorities and schedules.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.Physical Demands Ability to lift and carry up to 50 pounds.Prolonged periods of standing, walking, and working on equipment.Frequent bending, kneeling, and reaching.Use of hands and fingers to handle or feel tools and equipment.Ability to work in confined spaces and at heights.What We OfferStarting Pay $28.00 per hour DOE401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled#HMSWJobs
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.