Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for an Electrical Engineer to join our Test Facility Engineering Team.In this exciting and challenging role you will be responsible for design, manufacturing, implementing, testing, troubleshooting and maintaining electrical/electronic systems for testing gas turbine engines and test facilities.The Test Facility Engineering Team is responsible for maintaining 51 global Engine Test Facilities, integrating new engine test platforms and sustainment activities for existing test facilities. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, and Honeywell plus others. Members of our team occasionally have the opportunity to travel to remote sites which include several U.S. locations, Canada, the Netherlands, Singapore, UK and Australia.The selected candidate will be part of a team consisting of Electrical, Mechanical, Performance and Computer Engineers as well as Designers to create systems that are compliant, innovative, reliable, maintainable, and easy to operate.As the part of the Electrical group within this team, the selected candidate will have the need to take design documentation and transform it into electrical specifications.What you'll do:Design and integrate electrical engine and facility control systems using PLC, instrumentation and custom design software. Interpreting manuals and technical documentation to create requirements and specification for implementation. Support current engine test cell engine/facility control systems including thrust/torque measurement systems, oil and water cooling systems, fuel storage, and fuel supply.Work as an individual or part of a team to design, install, commission, test electrical/electronic systems to support operations.Create and maintain project documentation including requirement specifications, acceptance test plans, detailed drawings and calibration and operation procedures. Education Requirements:0-5 minimal years of Electrical Engineering Design experienceBachelor's degree in Electrical EngineeringPosition Requirements:Possess a PE designation or eligible for membership registration with the State of Texas Knowledge of electrical and electronic system design and documentation processesStrong organizational and decision making capabilitiesExcellent verbal and written communication skillsDemonstrated ability to learn new technical skillsWilling and able to work in a fast pace and changing environmentAbility to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the time.Driven by working in a team environmentWe will support relocation from Canada an work through greencard sponsorship.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description Leidos Defense Systems is seeking a talented Electrical RF Engineer to join a diverse team to create unique solutions for complex problems. With offices across the United States engaging in the defense, space, cyber and commercial fields, LDS provides responsive, cost-effective engineering, scientific and IT solutions.LDS' San Antonio office analyzes vulnerabilities in DoD developed systems using advanced electronic equipment. The team must stay on the cutting edge of technology to assess a wide varied of systems and communication architectures, including but not limited to: unattended ground sensors (UGS), cellular networks, tactical communications, surveillance systems, unmanned systems (UxS), satellite communication, and Radars. The group stresses each system to the breaking point while emulating an adversarial red team. The testing is conducted in both lab and test range environments and the team must document the findings for the customer. The end goal is to ensure that equipment utilized by the Warfighter is secure when fielded.Primary ResponsibilitiesReplicate and create open-source and commercially available adversary-specific threat and attack methodologies.Conduct field assessments to identify electronic warfare (EW) vulnerabilities and mitigations for rapidly developed, experimental, and fielded technologies.Provide full mission profile analysis and contested spectrum environments to assist with tactics, techniques, and procedures (TTP) development.Basic QualificationsPosition requires Bachelor's Degree in Electrical or Computer Engineering with a final GPA of 3.0 or higher.2+ years experience in one of the following technical areas: RF Engineering, Electronic Warfare (EW), SIGINT, digital signal processing (DSP), or software-defined radios (SDR).Experience with RF equipment, such as spectrum analyzers, signal generators, network analyzers, and vector signal analyzers.Competent technical writing.Approximately 20% travel is expected.Candidate must be able to maintain a DoD Security Clearance.Preferred QualificationsExperience with software defined radio is a huge plus.Experience with LinuxAn active Top Secret Clearance is ideal.Original Posting Date:2024-10-18While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.StandardAero is searching for a Mechanical Engineer to join our Test Facility Engineering Team.In this exciting and challenging role you will be responsible for design, manufacturing, implementing, testing, troubleshooting and maintaining Mechanical systems for testing gas turbine engines and test facilities.The Test Facility Engineering Team is responsible for maintaining 51 global Engine Test Facilities, integrating new engine test platforms and sustainment activities for existing test facilities. StandardAero services engines from manufacturers including General Electric, Pratt and Whitney, Rolls Royce, and Honeywell plus others. Members of our team occasionally have the opportunity to travel to remote sites which include several U.S. locations, Canada, the Netherlands, Singapore, UK and Australia.The selected candidate will be part of a team consisting of Electrical, Mechanical, Performance and Computer Engineers as well as Designers and Project Managers to create systems that are compliant, innovative, reliable, maintainable, and easy to operate.Responsibilities will include:Direct the planning, design, engineering, procurement, cost, scheduling, construction, commissioning and troubleshooting activities of multiple major projects by coordinating effort of various internal departments, project teams and outside consulting resources.Prepare conceptual and detailed design of major engineering projects requiring mechanical considerations. Manage projects based on approved timelines and project management principles. Provide technical and financial data for preparation of project justification and cost benefit analysis.Review and evaluate contracts for work to be performed by consultants and outside contractors, approve plans and designs and resolve problems as they arise.Monitor all work in progress to ensure that quality and engineering standards are met. Act as a liaison with internal and external customers, assuring satisfaction with progress and quality. Participate in projects as a team member and/or team project leader.Carry out special duties as assigned.Ability to travel to the United States, Canada, South Africa, Asia, Australia, and Europe.Ability and willingness to travel up to 35% of the timeEducation Requirements: University degree in Mechanical or Industrial Engineering4 plus years of experiencePosition Requirements:Experience with mechanical designs and related instrumentation.Experience working with hydraulics, compressed air and fuel systems. Working knowledge of PCs in the current company operating system environment.Strong planning, organizational, analytical, interpersonal, decision making, oral and written communication skills.Strong project management skills.Experience with project management in a manufacturing environment.Working knowledge of federal and provincial fire, building, plumbing and electrical codes an asset.Working knowledge of gas turbine engines and specific product knowledge an asset.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

As a Service Engineer (LEAP) you will provide interpretation and clarification of overhaul data; produces material review board, temporary overhaul data requirement, unit build standards, and engineering bill of materials documentation to support operational repair and overhaul processes.What you'll do:Recognize and understand flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participate in proactive risk analysis of flight/product safety critical parts and processes.Recognize and understand the Just Culture policy.Resolve technical problems beyond the scope of the product unit operations group; liaises with manufacturers.Perform engine and accessory test, performance analysis and troubleshooting.Prepare detailed work instructions for operations personnel, outside of routine overhaul procedures.Review service bulletins and manual changes and incorporates amendments into production.Review warranty claims and advises management on the disposition of assigned items.Provide written or verbal technical advice for customers; produces reports relating to product serviceability, repair summaries, warranty, failure analysis or product configuration.Provide technical support during the implementation of new processes; specifies tools and test equipment required; assists in training on the overhaul and test methods.Advise on repair and improvement schemes together with feasibility studies.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Education Requirements:Bachelor's degree in mechanical, Aerospace, Industrial, and Metallurgical Engineering or equivalent.Position Requirements:Good understanding of manufacturing methods, shop equipment and machining processes.Ability to read, understand and interpret blueprints, engine technical data and other maintenance program requirements and/or procedures from customers, OEMs, vendors/suppliers and regulatory agencies.Working knowledge of production management computer systems.Strong planning, organizational, analytical, leadership, decision making, oral and written communication skills.Thorough knowledge of company instruction, company process, temporary overhaul data revision and original equipment manufacturing manuals.In jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.Working knowledge of FAA 14 CFAR PART.121 and 145 regulations.Ability to represent the company with integrity at industry events.Experience in an aerospace or manufacturing environment.Preferred Requirements:Working knowledge of precision measuring instruments.Working knowledge of gas turbine engine and/or accessory theory and performance analysis.Working knowledge of PC's in the current company operating system environment.Working knowledge of production management computer systems.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We’re seeking dedicated professionals to join our Dining Services team. Be a part of our mission to create exceptional dining experiences for our residents. Apply today and let’s soar together at Blue Skies of Texas Senior Living Community!
Job Duties: Review production sheets and menus to determine the type and quantity of foods to prepare. Follow recipes and guidelines to prepare assigned menu items. Arrange and present food attractively and appetizingly. Test food by tasting, smelling, and using a thermometer to ensure it meets health and recipe standards. Prepare various menu items (vegetables, fish, meat, casseroles, soups, etc.) using kitchen equipment like kettles, ovens, and fryers. Follow instructions for batch cooling to support smooth operations in the tray line, dining room, and service areas. Monitor food quality, including temperature and accuracy. Set up and place food items for resident trays and other service areas. Verify menus and quantities using established forms. Perform other duties as assigned by the Executive Chef. Training will be provided to ensure safe equipment use.
Benefits: Medical, Dental & Vision Tuition Reimbursement & Scholarship Programs Employer Paid Short-Term Disability for full-time employees Employee Assistance Program Employee Referral Bonus Program A generous PTO program Retirement plans
Qualifications: Minimum of two years of experience in cooking or food preparation. Experience in short-order and breakfast cooking is a plus. Familiarity with kitchen equipment such as slicers, slow cookers and proper knife handling. High school diploma or equivalent is preferred. A two-year degree in culinary arts, hotel/restaurant management, or a related field is a bonus.

We are actively seeking a dedicated Registered Nurse for our double-weekend shifts, committed to maintaining the highest standards of care for our residents. As part of our exceptional team, you'll join a group of professionals who not only work hard but also support each other in delivering meaningful, patient-centered care. If you share our passion for making a difference, we encourage you to apply today!
In this role, you will be instrumental in assessing resident needs, developing and coordinating personalized care plans, and executing nursing procedures that require your Registered Nurse expertise. Additionally, you'll take on some managerial responsibilities, all while ensuring an outstanding level of customer service.
Nursing Care & Supervision: Provide care per physician orders and established standards. Supervise and delegate tasks to unlicensed personnel. Documentation: Record treatment details in EMRs and notify the Supervisor of significant changes in resident conditions. Resident Monitoring: Regularly assess residents and report any issues to the Supervisor and Physician. Order Management: Receive and accurately enter Physician orders in EMRs. Compliance: Maintain medical records and administer treatments according to State laws and nursing practices.
Benefits: Medical, Dental & Vision Tuition Reimbursement & Scholarship Programs Employee Assistance Program Employee Referral Bonus Program Retirement plans
Qualifications: Minimum of Associates degree required. Bachelors preferred. Must be a Registered Nurse licensed by and in good standing with The Texas Board of Nurse Examiners. Must have current CPR and AED certifications. At least one year of previous experience in a long term care setting.

We are looking for a compassionate Personal Caregiver to join our Memory Care center and help us deliver high-quality, efficient care. Our supportive team is dedicated to exceptional patient care, and we’re seeking someone who shares this commitment. Apply now to make a meaningful impact!
As a Personal Caregiver, you will provide direct care to residents with cognitive, emotional, and functional impairments. You’ll assist with daily activities, always aiming to promote independence, dignity, and personal choice.
Overnight Shift: 11:00PM - 7:00AM
Personal Care: Assist with personal care tasks, including dressing, grooming, and eating. Activity Assistance: Support and participate in scheduled program activities, encouraging residents and family members to join. Interaction Techniques: Use established techniques, prompts, and cues when engaging with residents. Swallowing Precautions: Monitor residents with swallowing precautions and report any issues to the Supervisor. Adaptive Equipment: Help fit and adjust adaptive equipment, such as visual and auditory aids. Dining Support: Assist with dining activities, including serving meals and household skills.
Benefits: Medical, Dental & Vision Tuition Reimbursement & Scholarship Programs Employee Assistance Program Employee Referral Bonus Program A generous PTO program Retirement plans
Qualifications: High school diploma or equivalent preferred. Preferred: Prior geriatric nursing assistant care and dementia care experience. Must show proof of successful completion and certification of a Texas Food Handlers Program or successfully complete within 60 days of hire. Preferred: Nursing Assistant Certification, as well as Cardiopulmonary Resuscitation, Automated External Defibrillator (AED) and First Aid Certifications.

We're looking for an Outside Sales Representative to join their team! This is a commission-based role with no cap on your potential earnings. We provide comprehensive training, full support and the tools you need to succeed.
In this role, you will develop leads and drive sales through your network of contacts and by actively reaching out to businesses in your area. A key component of the sales process involves physical visits to local businesses to build and nurture relationships. You'll also leverage a network of referrals to create new opportunities for growth, while we handle all the customer service aspects - allowing you to focus solely on selling and following up to see how we can continue to help your clients thrive.
Key Responsibilities: Lead Generation & Client Acquisition: Develop new business by utilizing your existing contacts and conducting physical visits to local businesses. Actively reach out to potential clients and present tailored staffing solutions. Relationship Building & Referral Networks: Build and foster a strong referral network to drive continuous revenue growth. Maintain regular contact with clients to understand their evolving needs and explore new opportunities. Sales Process Management: Follow a simple, streamlined sales process that we will train you in, allowing you to focus on your strengths—selling and relationship management. Client Communication & Support: While our team handles all customer service, you will maintain ongoing communication with your clients, ensuring satisfaction and exploring additional ways to help them succeed. Sales Tools & Support: Utilize our CRM software to track leads and manage your sales pipeline. We provide ongoing training and marketing collateral to support your efforts.
What We Offer: Uncapped Earning Potential: A commission-based structure with unlimited earning potential and performance-based incentives. Autonomy & Flexibility: Control your schedule and take charge of your own success. Comprehensive Training: We provide thorough training in our sales process, along with the marketing materials and CRM tools to help you thrive. Full Team Support: Our internal team manages all the customer service, so you can focus on generating sales and growing your client base.
Qualifications: Proven track record in outside sales, ideally within the staffing or recruiting industry. Strong ability to develop new business and nurture lasting relationships. Exceptional communication, networking and negotiation skills. Ability to manage a flexible schedule and work independently. Self-driven with a results-oriented mindset. Bachelor’s degree in Business, Marketing or related field (preferred but not required).