Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

Supervises and instructs mechanics, utility workers and cleaners in the repair, cleaning, and reconditioning of buses. Performs duties in a safe, efficient manner and in compliance with applicable rules and safety procedures.
Responsibilities and Specific Duties: Responsible for the supervision of mechanics, utility workers and cleaners and for the daily repair, cleaning, and reconditioning of buses. Supervises and instructs mechanics, utility workers and cleaners in the repair, servicing, and reconditioning of buses in assigned area. Provides technical assistance to personnel as necessary to assure quality and timely repairs. Coordinates upgrades, training and training schedule with General Foreman and Superintendent. Coordinates workflow from work area to work area. Responsible for all personnel and general administrative matters i.e., first step grievances, performance evaluations, disciplinary actions, payroll issues, etc. Maintains records of work performed and daily overtime, and absenteeism. Supervises maintenance and repair equipment, inspects tools and equipment for condition and proper use. Responsible for meeting equipment service demands in a timely manner. Ensures and maintains quality and safety standards. Research pertinent bus performance information and analyze data to determine bus down issues. Coordinates activities with Storeroom. Maintains yard control. Dispatches wreckers/T-Trucks/tire trucks for breakdown recovery and on street repairs. Keeps Superintendent and General Foreman informed on all matters of importance. Provides excellent customer service to METRO internal and external customers. Applies SMS (Safety Management System) methods and principles in daily routine and supports all aspects of the agency’s Public Transportation Agency Safety Plan (PTASP). Promotes safety awareness and follows safety procedures to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Requirements: High school diploma or equivalent.  Additional vocational/training in heavy duty vehicle maintenance and supplementary training in body repair, transmissions, welding, electrical and/or air conditioning preferred. Minimum of 5 years extensive diesel-powered bus maintenance experience including direct mechanical/journey experience.  2 years previous lead/supervisory experience, or successful completion of the Career Advancement Program (CAP) is required. Supervisory experience in a mechanical maintenance/shop environment is preferred. Good communications (written/verbal) and interpersonal skills. Good decision making and organizational skills. General knowledge and use of part books and maintenance manuals. Familiar with labor relations/union agreements and related procedures. Basic knowledge of personal computers and related software. A valid Texas Commercial Driver’s License with a P (passenger endorsement) is required for the job and must meet METRO’s requirements regarding motor vehicle records. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certifications/licenses as required. Applicants must successfully pass a reading, math, and mechanical assessment prior to interview.
The Metropolitan Transit Authority of Harris County, Texas has a zero-tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

If you're newly hired into certain bus mechanic job functions and employed with METRO for at least three months, you can begin to earn an incentive of up to $8,000.
Responsibilities and Specific Duties: Have a thorough knowledge of components on METRO’s revenue vehicles and their proper function as required for selected job classification. Show a proficient knowledge and use of test equipment and specialized tools related to selected classification requirements. Independently diagnose and repair all defects to completion in a timely manner under the supervision of a Mechanical Foreman. Perform duties in a safe, efficient manner and in compliance with all applicable rules and safety procedures. The specific job classification level will be determined on qualifications and experience.  Performs Preventive Maintenance Inspections (PMI) on revenue fleet. Inspects and/or test and observe defective equipment to troubleshoot and diagnose malfunctions of major components and complete assemblies. Performs diagnosis and repair of air brake systems, suspension, steering and alignment. Proper use and interpretation of laptop computer and related software. Must be able to read and interpret refrigerant, hydraulic, and pneumatic pressure gauges and understand the proper use of battery/ charging system analyzers. Services and diagnose electrical systems utilizing test instruments such as laptop computer, ID Reader/ Writer and able to read ladder logic charts. Assists in the servicing and diagnosing of exhaust after-treatment systems and electronic engine controls. Inspects and verifies dimensions, clearances, and torque of part fasteners to ensure conformance to factory specifications. Road tests vehicles when necessary to diagnose malfunctions or to ensure that they are working properly. Completes all required reports and records in a timely and accurate fashion. Assists in work direction with mechanics as assigned. Participates in on-going training in accordance with METRO’s Maintenance Training Program. Provides excellent customer service to METRO internal and external customers. Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Qualifications: High school diploma or equivalent.  Graduation from a related technical school preferred. Minimum three (3) years mechanical repair experience on automotive, medium or heavy duty equipment. Automotive Service Excellence Certificates (ASE) in brakes, steering/ suspension, and/or PMI preferred. A valid Commercial Texas Driver’s License with “P” endorsement is required and must meet METRO’s requirements regarding motor vehicle records. Must obtain Texas Commercial Driver’s License within 90 days of employment. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certification/licenses as required. Possess complete knowledge of all tools and equipment in shop related to job classification. Must maintain a basic set of personal hand tools to perform repairs related to job classification with exception of specialized tools provided by METRO. Ability to complete written reports, records and forms. Must be able to speak, read and write English.
The Metropolitan Transit Authority of Harris County, Texas has a zero tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

Overview: Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: $30.00 - $45.00 flag rate Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Performs complex and heavy-duty repairs. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications : Minimum of 5 years of automotive technician / mechanic experience Must be able to demonstrate the ability to properly use computerized equipment for diagnostics. Possess valid/current driver's license Current ASE's preferred Ability to work a minimum of five days, including Saturdays Working Conditions and Physical Demands: The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Master Automotive Technician / Mechanic must be able to meet the following physical requirements: Stand five hours per day and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.#bayard

Req ID:443260Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

*** $10K sign on bonus for qualified candidates with 3 or more years of experience***Job Title: A&P MechanicLocation: Houston, TXSchedule: Second Shift with possible Overtime (Tuesday-Friday, working 4-10 hr days)Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.The A&P Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft. Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic. Experience with Embraer, Falcon, Lear, Challenger, and Hawker required.Responsibilities:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Observes all safety, environmental and general housekeeping rules and policies.May perform other duties as required by the department.Requirements:High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License is required.Minimum 2 years corporate aviation experience on Learjet, Hawker, Falcon Jet, Challenger, and EmbraerEligibility Requirements:Must be authorized to work in the U.S.Must have proven mechanical and technical aptitude.Must have proven experience using a variety of hand and/or power tools.Must be able to work with minimal supervision.Strong communication skills required, both verbal and written.Must be available to work second shift, with overtime and weekends as needed.Must be able to work outside in extremes of temperature and inclement weather.Must have the ability to think clearly, speak intelligibly on the telephone and in person.Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.Must be able to work in confined spaces.Must be able to stand on hard surfaces for long periods of time.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination.Must have a history of demonstrating high levels of initiative in completing all job assignments and clearly following directions.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsAviation training preferred. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.Factory authorized training on assigned aircraft or engines is preferred.StandardAero Offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vision benefits401K (immediately vested company match up to 5%)Safety focused cultureQuarterly Bonus structureAdvancement opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Are you an experienced Systems Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!The RoleThe Senior Systems Engineer will be the engineering leader to support gas turbine programs including new product introduction, cost out, reliability improvements, engine delivery, test engineering, and root cause investigations of field issues. You will be responsible for establishing requirements, developing engineering plans to substantiate design changes to meet these requirements, and then leading the engineering teams through execution. This includes the engine level engineering integration and customer communications. You will also be the face of Quest to your customers. Through listening to customer challenges, and building on your previous experiences, you will find creative approaches that will solve their most difficult engineering problems.Roles & Responsibilities: Grasp the breadth of customer product offerings and provide guidance to the design, manufacturing, instrumentation, test, and business teams Execute a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executedOverall lead on external Customer CommunicationLeads technical execution through development, production, and field support applying established processes. Drives design decisions, identifying technical risks and abatementsLead and influence teams without direct reportingInfluences product line major decisions and long-term strategies negotiating and considering business/customer needs and technical/budget constraintsDrives prioritization of technical needs for a given engine model, cross functional coordinationHas deep knowledge of the engine model characteristics, design, configuration, and historyManages interface between components and execution organizations as well as overall configurationProgram Management - Tracks/allocates/manages budgets and deliverable statusUses judgment to make decisions or solve complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering Required Skills (Technical Competency):We're excited to talk to you if your qualifications meet the following criteria: Bachelor's degree in Engineering4-8+ years of experience in an engineering position3+ years in Gas Turbine or Gas Turbine Package Design, Test engineering, and AnalysisSystems/Module level design, integration, thinkingDevelopment and Test ExperienceCross functional project leadership, influence, communication skillsTeam Leadership and Program ManagementRoot Cause Problem SolvingClear thinker and effective problem solverLifecycle product managementStrategic program decision responsibilityMentoring/coaching experienceUS Citizen or Permanent Resident required Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement.Independence / work without direct supervisionSubstantial amounts of telephone, video conferencing and computer work.Heavily Regulated Industries with strict adherence to procedures.Flexibility to meet business deadlines by staying late or arriving early.Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PMAbility to use personal transportation to visit customer locations.Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

*** $10k SIGN ON BONUS ELIGIBLE ***Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.The Embraer Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft (airframe and powerplant). Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic.What to expect in this role:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Experience in corporate aviation on Embraer Legacy, Prader or Phenom.A valid FAA Airframe and Powerplant (A&P) License is required.Ability to read and interpret maintenance manual procedures, blueprints, technical manuals, and schematic diagrams.Must be authorized to work in the U.S.High School Diploma or GEDMust be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsMinimum 3 years of experience and formal training on Embraer Legacy, Prader or Phenom.Factory authorized training on assigned aircraft or engines is preferred.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

** $10k Sign On Bonus Eligible **Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.As a Learjet Mechanic at StandardAero Houston, you will be responsible for using your sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. You will perform operational checks and engine runs to ensure air-worthiness prior to departure.What to expect in this role:Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Corporate aviation experience and training on Learjet.High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License.Must be authorized to work in the U.S.Must be available to work overtime and weekends as needed.Must be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft.Preferred Qualifications:Minimum 3 years corporate aviation experience on Learjet.Factory authorized training on Learjet.Benefits that make life better:Comprehensive Healthcare Insurance401(k) with a 5% company match, immediately vested. Paid Time Off starting on day one!Quarterly Bonus opportunitiesHealth & Dependent Care Flexible Spending AccountsShort & Long-Term Disability InsuranceLife & AD&D InsuranceCareer development and cross-training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero