Pittsburg, TX • (35.8 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (39.1 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Pittsburg, TX • (35.8 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (39.1 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Pittsburg, TX • (35.8 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (39.1 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Pittsburg, TX • (35.8 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Gilmer, TX 75644 • (39.1 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Tyler, TX • (44.5 miles) • Full Time • 10/14/2026

EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visitwww.eyecare-partners.com.Job Title: Quality Assurance Supervisor- ClaimsMUST LIVE IN ONE OF OUR 18 States: Missouri, Florida, Kansas, Kentucky, Pennsylvania, Virginia, New Jersey, Texas, Minnesota, Michigan, Oklahoma, Alabama, North Carolina, Georgia, Illinois, Ohio, Indiana, ArizonaJob SummaryThe Supervisor for RCM QA Charge Posting

Terrell, TX 75160 • (43.3 miles) • Full Time • 10/13/2026

Build With Precision at Helion Step onto a fast-paced manufacturing floor where your welds become the backbone of structural steel assemblies. At Helion, you join a crew that counts on one another to hit production goals without compromising quality. Your day blends craftsmanship with consistency as you transform prepared components into finished assemblies using MIG (GMAW) processes. A day in the life You review blueprints and weld symbols, plan your sequence, and dial in your machine for production work using .052 wire. You maintain 27–30 amps with wire speeds around 400–500, laying down clean, consistent beads on parts that have already been fit-up and prepared. From joists and I-beams to webbing, connection plates, stiffeners, and supporting brackets, you move methodically through eac

Mount Pleasant, TX 75455 • (40.1 miles) • Full Time • 10/12/2026

Job description At Mid America Pet Food, our vision is to enrich the lives of pet families, and we believe that starts with our own team. We foster a positive and inviting atmosphere where employees feel valued and appreciated, making MAPF a great place to build your career.As a full-time team member, you'll enjoy a generous benefits package, includingemployer-paid health insurance,100% coverage of qualifying dependents,paid time off (PTO), aFlexible Spending Account (FSA),401k matching, and opportunities forovertime.We are currently seeking a dedicated Production Tech to contribute to maintaining a clean, professional, and safe working environment. In this multi-faceted role, you will perform routine and non-routine work as directed, always adhering to company policy, procedures, and valu

Tyler, TX • (44.5 miles) • Full Time • 10/11/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Check out our many videos to learn more!http://

Tyler, TX 75702 • (41.4 miles) • Full Time • 10/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Tyler, TX • (44.5 miles) • Full Time • 10/10/2026

Company Description Location:Tyler, TXPay:Pay Rate $30.71/hourShift:5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship.Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment to produ

Winnsboro, TX • (16.7 miles) • Full Time • 10/8/2026

HiFyve is hiring a Plant Manager in Winnsboro, TX!Salary: $130,000 - $170,000 annually, depending on experienceShift: DaysLocation: Winnsboro, TXBenefits: Full benefits packageJob DescriptionHiFyve is seeking an experienced Plant Manager to oversee the overall performance of a food or beverage manufacturing facility. This role will lead plant operations, develop department leaders, manage financial performance, and drive improvements in safety, quality, productivity, and cost.Job ResponsibilitiesLead overall plant operations, including production, maintenance, quality, warehouse, shipping, and safetyDrive plant KPIs related to safety, quality, productivity, service, and costManage plant budgets, expenses, P&L performance, and capital projectsIdentify and implement continuous improvement op

Greenville, TX 75402 • (31.2 miles) • Full Time • 10/6/2026

POSITION SUMMARY | In-Person Position | Greenville, TexasWe are seeking a hands-on, high-energy Mechanical Engineering Manager to lead our mechanical design and product development team for the VEX Robotics division. In this role, you will bridge technical design expertise with functional team leadership. You will manage a team of mechanical engineers and designers developing injection-molded plastics, metal structures, gears, structural motion components, and consumer/educational robotics hardware.The ideal candidate brings strong fundamentals in high-volume product manufacturing (DFM/DFA), 3D CAD modeling, structural analysis, and a passion for mentoring engineers while keeping complex multi-project lifecycles on schedule.VEX Robotics is a global leader in STEM education and competitive

Tyler, TX 75706-6031 • (44.5 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Mount Pleasant, TX 75455 • (40.1 miles) • Full Time • 10/3/2026

Job Title: Powder Coater/Part timePay: $15–$18/hr (varies by experience)Job Summary:Responsible for applying powder coating to metal parts/products to create a durable, high-quality finish. You make things look good and last long kind of like a solid resume.Duties & Responsibilities:Prep metal surfaces (cleaning, sanding, masking, blasting if needed)Apply powder using spray gun and coating equipmentCure parts in oven to proper temp and timeInspect finished product for thickness, coverage, defectsHang/remove parts from racks and maintain workflowMaintain equipment and keep work area clean and safeFollow all PPE and safety protocols (yes, you have to actually wear the gear)Requirements:1+ year powder coating experience preferredKnowledge of metal prep, coating, and curing processAbility to l

Tyler, TX 75706 • (35.1 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Pittsburg, TX 75686 • (36.6 miles) • Full Time • 9/30/2026

Title: Quality Assurance Lead Location: Pittsburgh, PA Team Dynamic: working within a larger team of data analysts, business analysts, developers, management team. Roles and Responsibilities: • Lead quality engineering and testing for data?driven regulatory reporting applications. • Validate data accuracy and completeness across source?to?target data flows and reports. • Design and execute test strategies covering functional, regression, and data reconciliation testing. • Partner with technology and business stakeholders to ensure regulatory requirements are met. • Oversee test execution, defect analysis, and root?cause identification. • Own testing documentation including scope, strategy, execution results, and delivery artifacts. Must Have Technical Skills: • 5–8 years of experience in d

Hawkins, TX 75765 • (27.7 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Greenville, TX 75402 • (31.2 miles) • Full Time • 9/29/2026

Position SummaryEXOS Aerospace is seeking a Guidance, Navigation, and Control (GNC) & Flight Controls Engineer to support the development, analysis, simulation, testing, and validation of flight systems for reusable suborbital vehicles and flight test infrastructure.This role is primarily focused on GNC, including vehicle dynamics, trajectory design, guidance logic, navigation performance, control system development, simulation, and post-flight data analysis. The ideal candidate will also be comfortable working beyond traditional GNC boundaries to support instrumentation, sensors, controls hardware, data acquisition, integrated testing, and troubleshooting as needed.In addition to the engineering scope, this position carries technical program management responsibilities in direct support o

Terrell, TX • (43.6 miles) • Full Time • 9/29/2026

Position Summary We are seeking a Controls Engineer to support and improve automated systems within a fast-paced manufacturing and material handling environment. This role focuses on troubleshooting, system optimization, and continuous improvement to ensure equipment reliability and minimize downtime. Responsibilities Troubleshoot and resolve issues with automation and control systems Support conveyors, sortation systems, scanners, and related equipment Work with PLCs, VFDs, servo drives, and motor control systems Perform root cause analysis and implement corrective actions Partner with operations and maintenance to improve system performance Monitor system metrics and recommend efficiency improvements Support installation, upgrades, and maintenance of automation equipment Provide technic

Tyler, TX 75701 • (44.4 miles) • Full Time • 9/27/2026

Benefits:Voluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative

Quitman, TX • (11.6 miles) • Full Time • 9/26/2026

Join Our Team as a Manufacturing Production Employee!Are you ready to bring your skills to a dynamic and growing company? Amphora Nutritional Manufacturing, located in Quitman, TX, is looking for a dedicated and detail-oriented Manufacturing Production Employee to join our team. If you have at least one year of experience and are eager to contribute to a company that values quality and teamwork, we’d love to hear from you!About Amphora Nutritional ManufacturingAt Amphora Nutritional Manufacturing, we pride ourselves on producing high-quality nutritional products that make a difference in people’s lives. Our team is passionate about excellence, and we work together in a supportive and collaborative environment to ensure every product meets our high standards.What You’ll DoAs a Manufacturing

Sulphur Springs, TX 75482 • (17.3 miles) • Full Time • 9/25/2026

Now Hiring: Cabinet & Hardware Assemblers (Bilingual Preferred)Estamos Contratando! Ensambladores de Gabinetes y Hardware (Se Prefiere Bilinge)Are you experienced in construction or assembly? Can you work with your hands, follow blueprints, and use power tools confidently?Rodgers Wade is looking for Cabinet/Hardware Assemblers to join our team in Paris, Texas!Tienes experiencia en construccin o montaje? Sabes usar herramientas y trabajar bien en equipo?Rodgers Wade quiere que formes parte de nuestro equipo como Ensamblador de Gabinetes/Hardware!Location / Ubicacin: Paris, TXPay Rate / Salario Inicial: $15–$17 per hour (based on experience)Schedule / Horario: Monday–Friday | 5:00 AM – 1:30 PM Some Saturdays & Overtime as needed / Algunos sbados y horas extras, segn sea necesarioWhat You’ll

Tyler, TX 75702 • (41.4 miles) • Full Time • 9/23/2026

Who You Are:You’re energetic and enjoy working outdoors. You understand that this space can be demanding, and you are equipped with the skills necessary to get the job done. You have at least seven years of combined experience. Bachelor’s degree with 3 years of field experience. Associate degree with 5 years’ experience. 7 years of utility vegetation management experience.We’re dedicated to the growth of our employees. We truly believe in your development. For those who show initiative, we will do what it takes to get you where you want to go.We’re growing but still maintain an entrepreneurial spirit. We give you room to be accountable and responsible in your role. We believe progress is bred through innovation and we encourage our employees to bring their ideas forward.We’re safety focuse

Terrell, TX 75160 • (43.3 miles) • Full Time • 9/23/2026

Summary/ObjectiveThe Production Supervisor is responsible for overseeing daily manufacturing operations and leading front-line production employees to ensure safe, efficient, and high-quality output. This role reports directly to the Production Superintendent and is accountable for executing production plans, maintaining workflow efficiency, and supporting continuous improvement initiatives.The Supervisor provides hands-on leadership on the production floor and ensures adherence to company policies, safety standards, and quality expectations. This role is accountable for safety, quality, delivery, cost, and team development within a high-volume, high-mix metal fabrication environment.Essential FunctionsSupervise daily production activities to ensure achievement of safety, quality, delivery

Greenville, TX • (33.6 miles) • Full Time • 9/22/2026

At PEARCE, we've got a career for you!Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://ww

Canton, TX 75103 • (33.4 miles) • Full Time • 9/21/2026

Road Ranger is looking for Subway Team Members to join the team at our under construction Canton, TX location! Competitive wages based upon experience. The store is schedule to open late January 2025.Road Ranger is GROWING and Hiring Immediately!!Are you looking for Part Time work? We have positions available!We offer benefits for our FULL and PART-TIME employees.Join the Road Ranger family and see how far your drive can take you!At Road Ranger, we aim to provide drivers with the warm hospitality, top tier fuel, quality food, and essential products they need along their journey. We owe our success to our friendly, driven employees who thrive in our fast-paced environment. To reward their hard work, we offer our employees a wide variety of competitive benefits to support their health and we

Sulphur Springs, TX 75482 • (17.3 miles) • Full Time • 9/21/2026

Description: Position Summary We are seeking a dependable and safety-focused Manufacturing Associate to join our trailer manufacturing team. This position is responsible for hanging and securing goosenecks, dump trailers, and car haulers onto an overhead assembly line system and operating an overhead crane to properly position units for processing through a shot blast machine. This role requires attention to detail, safe equipment operation, and the ability to work in a fast-paced industrial environment.Key Responsibilities Hang goosenecks, dump trailers, and car haulers onto the overhead assembly line systemOperate an overhead crane to lift, maneuver, and position trailers safelyEnsure trailers are properly secured, balanced, and aligned before entering the shot blast machineMonitor units

Tyler, TX 75708 • (41.1 miles) • Full Time • 9/21/2026

Join us at Cascade Manufacturing Company as a full-timeTRUSS ASSEMBLER at our manufacturing plant in Tyler, TX, and take your career to new heights! With competitive pay starting at $19.00 per hour, this on-site position offers the chance to learn or enhance your construction skills. You can enjoy great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Flexible Spending Accounts, and Paid Time Off.Who we are:Cascade Mfg Co, established in 1953, is a leading manufacturer of wood and cold-formed steel trusses serving various markets in the Midwest, South, Southeastern US, and beyond. With manufacturing facilities strategically located in Cascade, IA, Tyler, TX, and East Dublin GA for steel trusses, and Cascade, IA and Pleasantville, IA for wood trusses, we ensure efficient se

Greenville, TX 75402-4941 • (33.6 miles) • Full Time • 9/19/2026

Description:DescriptionAs an Electronics Manufacturing Test Engineer, you will play a pivotal role in the development, implementation, and ongoing support of test solutions across our electronic manufacturing processes. Leveraging your expertise in electronics engineering and product development, you will lead the design and build of test fixtures, drive comprehensive test development for electronic circuit board production, and ensure all test solutions remain operational and effective throughout their lifecycle all while adhering to Lean methodologies and ISO 9001:2015 standards.Essential Job Functions:Develop and implement comprehensive test strategies, procedures, and test programs for electronic assemblies, ensuring robust coverage across all stages of the production lifecycle.Design,

Tyler, TX 75701 • (44.4 miles) • Full Time • 9/19/2026

Job Title: Sr. Electrical Engineer Job Location: Tyler, TX What You'll DoDevelop electrical engineering deliverables including SLDs, load lists, calculations, cable sizing and routing, lighting layouts, and grounding/lightning protection systems.Perform short-circuit, coordination, voltage-drop, motor-starting, arc-flash, and lighting calculations using ETAP and SKM.Prepare and review specifications, data sheets, and material requisitions for MV/LV switchgear, transformers, motors, UPS, VFDs, and lighting systems.Ensure designs comply with NEC, UL, IEC, IEEE, API standards and coordinate with multidisciplinary engineering teams.Support vendor clarifications, review vendor drawings, and assist with construction, testing, and commissioning activities.Estimate man-hours for project proposals

Mabank, TX 75147 • (44.7 miles) • Full Time • 9/18/2026

Move Forward with Volt!Volt is immediately hiring multiple2nd shift Manufacturing Test Technicians in Mabank, Texas.As a Manufacturing Test Technician, you will:Perform routine Quality Testing of Gas Producers, Power Turbines, and Reduction Gearboxes to ensure conformance to customer specifications.Assist with the installation and removal of gas turbines and accessories.Assist with green run and final performance acceptance test of gas turbines.Observe, record, and review test data.This is a full-time, temp to hire opportunity.Schedule: Monday – Friday from 1pm – 9:45pm plus overtime and weekends as needed. The ideal candidate will have:Minimum two (2) years of demonstrated experience in a manufacturing or shop environment.Knowledgeable in the use and application of simple electrical and m

Mineola, TX • (19.8 miles) • Full Time • 10/14/2026

DescriptionThere’s a reason Trinidad Benham is recognized as a leader in our industry. Trinidad Benham Corp has been in business for over 100 years, and we know a thing or two about providing stable employment and growth.WHAT YOU'LL BE DOINGThe Machine Operator is primarily responsible for efficiently operating packaging machinery to produce various products according to customer specifications.Essential functionsReasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.Read and understand daily production schedule and material requirements.Transport needed packaging materials to production area.Set-up and operate packaging equipment with correct materials and product based on order specifications. Safely and efficiently stack finish

Gilmer, TX • (38.9 miles) • Full Time • 10/13/2026

**Job Title:** Production Operator**Location:** Gilmer, TX**Company:** Duoline Technologies**Job Type:** Full-Time**About Us:** Duoline Technologies, a Maxtube Group company since 2017, developed the DUOLINE lining process as a means to solve own downhole steel tubular corrosion problems. We have installed more than 100 million feet of DUOLINE tubing worldwide.**Job Summary:** We are seeking a dedicated and detail-oriented Production Operator to join our manufacturing team. The ideal candidate will be responsible for operating production equipment, monitoring processes, and ensuring that products meet quality standards. This role requires a commitment to safety and efficiency in a fast-paced environment.**Key Responsibilities:** - Operate and monitor production machinery and equipment acco

Gilmer, TX 75645-7877 • (38.9 miles) • Full Time • 10/10/2026

About Company: Integrity Services TX LLC is a trusted, Texas-based oilfield service company built on hard work, reliability, and doing the job right the first time. We provide a full range of field services to the upstream and midstream energy sectors across Texas and the surrounding region.Our core services include: General oilfield construction and supportRoustabout crews and facility maintenanceRight-of-way (ROW) clearing and reclamationPipeline installation, maintenance, and integrity workDirt construction – lease roads, location pads, reserve pits, containment ponds, and commercial site prepExcavation, grading, and heavy equipment operationsFounded and still operated with a strong emphasis on safety, quality, and customer relationships, Integrity Services TX has earned a reputation fo

Tyler, TX • (44.5 miles) • Full Time • 10/5/2026

Role OverviewCandidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards.Key ResponsibilitiesThe SMT operator will run and maintain the SMT equipment (paste printer, pick and place,reflow). Operator will also be expected to program jobs.Job Description:Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be ableto operate and maintain equipment other than SMT equipment.This person must be capable

Greenville, TX 75402 • (31.2 miles) • Full Time • 10/5/2026

Shift: 1st ShiftSchedule: Monday-Friday / 7:00 AM to 5:00 PMPay Range: $18.00 to $20.00 per hour (based on experience)Make Your Mark in Advanced Manufacturing!Are you ready to take your manufacturing career to the next level? We're seeking a skilled Production Systems Operator to join our dynamic team and operate state-of-the-art machinery systems in our modern manufacturing facility.Key Responsibilities:Lead the operation of sophisticated production machinery systems.Perform quality control testing using industry-standard methods.Troubleshoot and maintain high-tech equipment.Operate modern material handling equipment.Contribute to continuous improvement initiatives.Qualifications:High School Diploma or GED.Manufacturing experience.Forklift/powered industrial truck experience.Safety-consci

Mabank, TX 75147 • (44.7 miles) • Full Time • 9/20/2026

Description: Eagle Metal manufactures structural connector plates, as well as provides truss and panel design software to our customers nationwide! We are a group of professionals who share two core values: A warrior’s spirit to work hard, innovate and persevere; a servant’s heart to treat others with respect and always give that something extra in helping every customer succeed.With our continued growth, we are looking for someone to join our production team in Mabank, Texas.Requirements: The candidate should be reliable and able to work in an environment that requires being on your feet and some lifting. Must be a dependable part of the team, as teamwork is vital to our continued growth and success!Position Responsibilities:· Operate, or assist with, a stamping press and related equipmen