We are looking for experienced Traffic Control Technicians to join our team! This is a year-round, full-time permanent position with full benefits after 60 days.
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

About the Role: The Fleet Equipment Supervisor is responsible for operating an efficient and effective operation through knowledge of equipment, cost controls, achievement of objectives, and maintenance of all relevant equipment records.IBEW Local 57Company OverviewWith roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally.Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record.Essential FunctionsSupervise work of designated in-house mechanics, field mechanics, fuel & lube technicians, and vendorsKeep current on new technologies as they relate to the management of equipment and apply accordinglySchedule and perform preventative maintenance for designated Company equipmentProvide emergency/unscheduled repairs of equipment as neededSupervise the inspection and repair of designated Company vehicles and equipment and provide recommendations on course of action accordinglyUnderstand and ensure compliance with manufacturer warranty and policy proceduresRead and interpret equipment manuals and work orders to perform required maintenance and serviceOversee mechanics in the performance of all repairs on both light and heavy equipmentDocument work performed by utilizing system software programsEnsure OSHA standards and company safety policies are always complied withUnderstand and follow federal, state and local regulationsCoordinate with safety department to ensure a safe work environment is maintainedSecure and analyze vendor quotes and estimates for services, tools, parts, and suppliesMonitor and control inventory levels of parts, tools and suppliesDevelop and maintain vendor list and continuously monitor overall quality of service providedRegular and predictable attendanceOther duties as assignedEssential functions of this position are to be performed at a Company-designated office or field locationUnderstand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: QualificationsMinimum 5 years of experience in fleet equipment maintenanceHigh school diploma or GEDKnowledge/Skills/AbilitiesProficient with computer systems as related to utilization of scheduling of manpower/resources, implementation of preventative maintenance programs and inventory management systemsGeneral knowledge of MS Office SuiteStrong commitment to safetyExcellent communication skillsExcellent interpersonal skills and the ability to build and maintain rapportExcellent organizational and time management skillsStrong leadership and team building skills What We Offer: Compensation & BenefitsThis will be a union position. Wage depends on experience and certifications, and benefits are detailed within the applicable collective bargaining agreement.Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-.MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Onsite

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Req ID:451149Address: 8513 N Commerce Dr Lake Point, UT, 84074Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Apprentices work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Are you mechanically inclined with no professional experience No problem! We will teach you! In the apprentice program, you can expect to learn:Electrical diagnostics and repairsAir conditioning & heating diagnostics and repairsWheel end assembly diagnostics and repairsAir system diagnostics and repairsAir brakes diagnostics and repairsCharging system diagnostics and repairsBasic computer diagnostics and auxiliary component replacementParts lookup and acquisition Job Functions: Assist customers with roadside servicesLearn preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Description About the RoleThe Heavy Duty Technician is responsible for ensuring our Hydrovac fleet is in safe working condition by diagnosing, repairing, and maintaining our line of trucks. What You'll Be Doing Inspects heavy equipment and performs quality repairs and preventative maintenance services of assigned branch or branches’ Hydrovac fleet.Performs scheduled maintenance, such as cleaning and lubricating parts and perform other routine maintenance work.Diagnoses and identifies malfunctions, using computerized tools and equipment .Tests equipment that has been repaired and makes adjustments.Qualifications What You'll Need for Success Licensed Heavy Duty Technician or equivalent; 310T License Minimum 3 years’ experience with heavy equipment (Hydrovac or Vacuum Truck experience preferred).Must be able to operate a motor vehicle, G license requiredAbility to interpret work orders and technical manuals on paper and PC based formats.Strong written and verbal communication skills.Ability to mentor an apprentice. What You'll Get in Return Badger Offers a comprehensive benefits package for full-time employees which includes: Generous Salary and Bonus Program(s)Low cost Medical, Dental, and Vision InsuranceRRSP with Employer MatchingEmployee assistance program (EAP) that allows for covered behavioral health visitsGenerous Vacation ProgramsEmployee Referral ProgramEmployee Training Program(s) If you feel you don’t have the experience listed above, but still think you are qualified for the job, we encourage you to apply for consideration. The salary for this position will be commensurate with education or work experience. Candidates will be required to successfully complete pre-employment screening, which may include criminal background check, driver’s abstract review and drug and alcohol test. Affirmative Action Responsibility As a proud equal opportunity employer, reasonable accommodations may be available to individuals with disabilities to interview and to perform the essential functions of a role. It is Badger's policy to afford equal employment and advancement opportunity for all qualified individuals without distinction or discrimination because of race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We hire great people from a wide array of backgrounds, not because it is the right thing to do, but because it makes Badger stronger. About Us Badger is the largest provider of non-destructive excavating and related services in North America. For over 30 years, we have been innovating cutting-edge technology – like the Badger Hydrovac – and serving a diverse customer base across a broad range of infrastructure industry segments including energy, industrial, construction, telecommunications, transportation and more. We areefficient,safe, andreliable, and we work hard to enable our customers – across a wide range of industries – as they build and maintain the critical infrastructure needs of our communities. We’re committed to not just doing the work - but doing good along the way! There has never been a better time to join the Badger team. #BDGRJobsHP

Clean Harbors in Salt Lake City, UT is seeking a Class A CDL Equipment Operator to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Monday through Friday schedule, some evening and weekend work due to emergency response call outs. Overtime after 40 hrs. Hazmat and Tanker endorsements preferred. The ability to obtain within 90 days of employment required. Up to 20% overnight travel. Hotel and per diem provided. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthPay range $25-27+ per hourComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerOperate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)Operate a variety of Class A trucksLoading and unloading of trucksManual labor on site to ensure fulfillment of customer needsProper placarding of vehicles to meet Company and DOT requirements/regulationsMaintain daily logs, time sheets, and various reportsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsValid Class A CDLAbility to obtain Hazmat and Tanker endorsement within 90 days of employmentAbility to use various mobile devicesPerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experienceHazmat and Tanker endorsementPrevious Hazmat experienceAbility to operate a manual transmissionPrevious manual labor experienceClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH#LI-AK1

Maintenance Technician Salt Lake City, UT, USAReq #21036 Tuesday, October 29, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Maintenance TechnicianPackaging Corporation of AmericaPay and BenefitsPay Range = $34.19 - $43.29 based on mechanical and electrical skills and experience.Excellent Benefits Package (Health, Dental, Optometry)401K Plan1.5 Pay over 8 hrs. and over 401.5 Pay Holidays + additional OT over 8 hours on holidaysUniforms ProvidedPCA provides paid training to help technicians advance through the skill levels and achieve higher pay.Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipendsPCA provides Uniforms for Maintenance TechniciansResponsibilitiesThis position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are multicraft and training is provided to develop these skills.Basic Qualifications2+ Years’ experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus.All applicants must apply at Careers.packagingcorp.com to be considered. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourly

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredTRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

Our Team is Kind of a Big Deal!UniFirst is seeking areliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime!We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment.Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Knowledgeable in industrial maintenance of facilities and equipment.Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Valid driver’s license and a safe driving record are required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Trailer Technician will perform preventative maintenance on UPS transportation trailers and tractors.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? Ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsResponsibilities & Duties:Meet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksOperate standard/manual transmissionOperate power, pneumatic toolsRequired to wear personal protective equipmentWork in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay rate is $25.73 and top rate is $39.59per hour.For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

About the Role: The Sr. Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You’ll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers.This position requires significant travel, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided.IBEW Local 57Company OverviewWith roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally.Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record.Essential FunctionsThis is considered an advance-level skilled or career level positionPerform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situationsPerform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedulesFrequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional mannerMay provide oversight for less experienced mechanicsPerform routine and preventive maintenance, inspections, and repairsIdentify mechanical problems either visually or with computer diagnostic equipmentMaintain records of time and materials used on each job, the condition of the equipment, and the repairs performedTrack information in computer software; ensure repair orders and weekly timesheets are complete and accurateConduct safety inspections of equipment and prepare safety documentationWork in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as requiredParticipate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirementsOther duties as assignedRegular and predictable attendanceEssential functions of this position are to be performed at a Company-designated office or field locationUnderstand and comply with the Company’s Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: QualificationsMust have five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience.Must have DOT medical card.Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing.Must be at least 18 years of age.High School Diploma or equivalent preferred but not required.Knowledge/Skills/AbilitiesMust be reliable and have a strong work ethicProven ability to work independently and without direct supervisionGood teamwork skills to work effectively with coworkersAbility to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily logBasic computer or data entry skillsSolid experience using mechanical tools, materials, and testing equipmentSolid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipmentAbility to follow posted safety rules and safe operating proceduresGood understanding of applicable regulatory guidelines and rulesPhysical Requirements/Working ConditionsMust be reliable and have a strong work ethicProven ability to work independently and without direct supervisionGood teamwork skills to work effectively with coworkersAbility to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily logBasic computer or data entry skillsSolid experience using mechanical tools, materials, and testing equipmentSolid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipmentAbility to follow posted safety rules and safe operating proceduresGood understanding of applicable regulatory guidelines and rules What We Offer: Compensation & BenefitsThis will be a union position. Wage depends on experience and certifications, and benefits are detailed within the applicable collective bargaining agreement.Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-.MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Req ID:449337Address: 358 South 2200 West Springville, UT, 84663Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Our Facility Maintenance Repairs are located at our Aragonite facility in Dugway, UT are responsible for conducting maintenance on a variety of equipment. This position offers guaranteed 40 hours a week as well as the opportunity for overtime. Company provided shuttle from surrounding areas: Magna, Salt Lake City, Tooele, and Grantsville.Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times.Perform maintenance activities including, but not limited to, Pump rebuilds, Preventative Maintenance, Basic installations of pipe, and electric work.Perform basic repairs and up-keep in the Welding, Electrical, Pipe fitting, and Mechanical disciplines.Operates a forklift if required and trained.Mobile MechanicEnsures that work meets all applicable Health and Safety Standard Operating Procedures.Ensures that work meets compliance standards within facility operation.Maintaining a clean work environment.Performs other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business.High School diploma or equivalent required.5+ years’ experience in preventative maintenance or basic installations of one or more of the following: Welding, Electrical, Pipe fitting, Mechanic.Demonstrates basic proficiency in welding, electrical, pipe fitting, mechanical knowledge. Clean Harborsis the leading provider of environmental, energy and industrial services throughout United States and Canada, as well as Mexico and Puerto Rico. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. At Clean Harbors you are offered unique opportunities for all stages of your career. Clean Harborsoffers all eligible employees a comprehensive benefits package including:• Opportunities for growth, development and internal promotion• Health, Dental and Life Insurance• 401K, tuition reimbursement, and generous paid time off• Company paid certifications, licenses and training To learn more about our company visit us atwww.cleanharbors.comWe thank all those interested in joining the Clean Harbors team; however only those that complete the online application and meet the minimum job qualifications will be considered for this role.Clean Harbors is a Military & Veteran friendly company-CM *CH #LI-AN1

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team.?Automotive Technician will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from various manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations).?Automotive Technicians?must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control.?If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided.?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsKnowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsWorks?full time shifts: 8 hours per day, 5 days per 7-day weekDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The base pay for this position is $38.37 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

***************$5,000 SIGN ON BONUS!!***************** Clean HarborsWoods Cross, UTis looking for aMobile Vehicle Mechanicto join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesPay is based on experience $30-31 an hour.Opportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management. What does it take to work for Clean Harbors High School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and equipment.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company for Women to Work for in Transportation”

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform.HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs.Our goal is to make technology accessible to everyone andit all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobsthey accept based on their skill sets and other personal factors. Why Become a Technician Set Your Own Schedule-Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-setGet Paid Weekly -Techs average $100+ per job. Add skills to your profile to increase your weekly earningsJoin the Community -Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of helpwith their various technology devices and systems. You will be able to select from a range of jobs such as: TV MountingComputer/Printer/Networking SupportHome Theater InstallationSmart Home InstallationIn-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and securityGreat attitude and enjoy helping people!Car/transportation requiredMust be at least 18 years of age In a HelloTech Home,Technology Just Works

****************$5,000 SIGN ON BONUS!!****************** Clean HarborsWoods Cross, UTis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesPay is based on experience $25-29 an hourOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH