We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Fabricators are responsible for fabricating and assembling polyethylene pipe to create a variety of customized structures such as: fittings, valves, T's, Y's, elbows, aqua shields, geothermal vaults, manholes, dual containment units, pumps, gas aeration lines and similar structures that meet customer specifications by performing the following duties: Read and interpret blueprints, product drawings and pic ticket orders to determine materials, tools and equipment needed to complete work Follows quality control procedures to ensure that the assembled, fabricated product meets customer specifications Upholds accurate records of materials used on "ticket"; locates and pulls required materials from inventory Maintains clean work area and equipment; following safety procedures concerning use of equipment and materials to maintain safe working conditions Operates ISCO's fusion and fast fusion equipment, cranes and forklifts
Schedule: Four day work week, Monday - Thursday
Benefits: Medical Dental Vision 401k
Qualifications: Must be able to read and interpret blueprints, product drawings and pic ticket orders to determine materials, tools and equipment needed to complete work. Be able to utilize a variety of hand tools, saws and cutting equipment and performs other related duties as assigned Basic computer skills Must be able to lift up to 40lbs on a regular basis and stand for long periods of time
At ISCO, we put high value on appreciation and respect, and provide you with an opportunity to really make a difference. ISCO is a family owned and operated company born and raised in Louisville, KY that is focused on our team members’ growth.  ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: This position welds parts and components for equipment, products, and installations by means of MIG, MAG, TIG, electrode welds or any other welding application. As part of a customer-focused team, you will be working with tight deadlines, challenging mechanical problems, and discussing the work with the manager before, during, and after work completion. Shift Hours: Mon-Thur / 3:30pm - 2am (Training on 1st shift will be required for up to 6 months) Responsibilities: Select the appropriate welding method, such as TIG, MIG, or stick.Proper Identification of materials and component preparation.Welding repairs on raw and finished parts.Complete all welding work assigned according to operation instruction.Verify the quality of finished work, demonstrating an in-depth understanding of specifications and workmanshipMeet production goals relating to efficiency, schedules, and scrap.Record accurate, timely data on computer-based systems or in manual logs.Maintain a safe workplace by wearing relevant protective equipment according to safety protection requirements, following procedures and rules, and completing training.Clean and maintain equipment and tools and keep an organized workspace.Able to define, evaluate, and discuss quality workmanship related to welding.Must show a customer-service mindset for on-time delivery and quality work.Demonstrated track record of reliable, dependable attendance; able to work overtime.Other duties as assigned. Requirements: 3-5 years of welding experience in a manufacturing environmentAbility to obtain ASME welder certifications within 6 months of employment (Horizontal stick/TIG and flat MIG)Standing for long times required, frequent lifting with occasional lifting up to 50 pounds. The pay range for this position is $19.34 - 28.98 USD Hourly Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options)Life Insurance + Supplemental Life, Child, Spousal, and AD&D InsuranceShort and Long Term DisabilityRetirement Planning, 401(k) plan, & Financial Wellness ResourcesEducational Assistance ProgramTime off Policies (including sick leave, parental leave, and paid vacation)Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Req ID : R-13415 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job Description:Position Details:Monday - Friday 1st Shift hours, flexible start time between 4am and 6amPay starting at $35.00 per hour or more depending on experience$10,000 Sign On Bonus (Terms Apply), Safety Boot Allowance and Benefits on Day 1 of EmploymentWe Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:Under general supervision, performs the troubleshooting, repair and maintenance of material handling equipment (forklifts, palletjacks, scrubber, etc.). Maintains the facilities material handling equipment according to an established preventative maintenance schedule and on 'as needed" basis. Observes all safety and regulatorystandards. Ensures quality of work product while working in a efficient and timely manner. This position functions as a team memberwithin the department and organization as required, and performs any duties assigned to best serve the Company.Responsibilities may include, but not limited to:Obtains daily work orders for material handling equipment maintenance and/or repair. Minimize down time for equipment.Orders necessary parts required to maintain equipment.Performs preventative maintenance according to equipment standards, guidelines and timeframes.Ensures batteries and battery charging equipment are properly maintained and functional according to standards.Maintaining maintenance shop in a clean and orderly manner. Keeps accurate maintenance records and is financially prudent withall expenses incurred.Follows all safety standards and policies.Performs all needed general maintenance and repairs for grounds, warehouse, shop and office facilities.Performs other related duties as assigned.Qualification:Required Education: High School Diploma/GED or Equivalent ExperienceRequired Experience: 4 - 6 years in material handling equipment maintenance and general maintenance and repairs for large warehouse, fleet shop and office facilities.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

ManTech seeks a Program Security Officer, Journeyman, in support of our government customer. The Program Security Officer provides special access security oversight for the Missile Defense Agency supporting 10,0000+ personnel at numerous geographically separated locations.Responsibilities include but are not limited to:Interface with senior agency leadership and government officials to develop, document and publish MDA Special Access Program (SAP) Security Policy to protect sensitive special programs.Provide all facets of program security management in support of SAP initiatives, to include personnel, physical, information, industrial, and SCI security.Present indoctrination, debrief, and refresher training for program briefed personnel regarding obligations to protest classified informationEnsure adequate secure storage and workspaces for customers, conduct annual inventory of accountable classified material and provide guidance and oversight to defense contractors.Prepare CUAs, MOUs, and MOAs for resident non-MDA SAPs for review and approval, develop and maintain SAP documentationPrepare and submit SOP, monitor security incidents. Maintain SOP facility and personnel folders.Maintain TSCO log book. Implement all applicable requirements to maintain Facility IDSMinimum Qualifications:Has 3+ years of experience as a Program Security Officer (PSO) with at least 3 cumulative years in acquisition SAPs. The last SAP-related position must be within the last nine months.The PSO-Journeyman is capable of developing and implementing a multi-disciplined security program for complex, major acquisition Special Access Programs (SAPs). Knowledgeable of personnel, industrial, physical, IT/IA, and information security disciplines.BS/BA in related field or a combination of lower-level education, formal training and experience beyond the basic Journeyman baseline.Periodic travel is required for both CONUS and OCONUS locations.Must be able to travel at times that exceed two weeks per occurrence.Security Requirements:TS/SCIPhysical requirements:Must be able to be in a stationary position more than 50% of the timeMust be able to communicate, converse, and exchange information with peers and senior personnelConstantly operates a computer and other office productivity machinery, such as a computer...Less

Want to build a stronger, more sustainable future and cultivate your career Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters.Job Purpose and ImpactJob Location: Dayton, VAJob Type: Full TimeShift Available: 3rdCompensation: $29.67/hrBenefits InformationMedical, Dental, Vision, and Prescription Drug InsuranceHealth and Wellness IncentivesMarathon Health Clinic (Employer sponsored health center)Paid Vacation and Holidays401(k) with Cargill matching contributionsFlexible Spending Accounts (FSAs)Short-Term Disability and Life InsuranceEmployee Assistance Program (EAP)Tuition Reimbursement/Opportunities to growEmployee DiscountsPrincipal AccountabilitiesMaintain production and quality by ensuring operation of electrical systems, apparatus, electrical and electronic components of machinery and equipmentTroubleshoot, ensuring proper maintenance and operational status of equipment using a variety of hand tools and utilizing computer systems/programsPerform other duties pertaining to hydraulics and pneumaticsRequired QualificationsAbility to communicate efficiently in English (read, write, and speak English)Experience or equivalent completed schooling in diagnosing, replacing, and repairing 110/220/480vindustrial electrical circuits, components, and electric motors, and programmable logic controllersExperience or equivalent completed schooling in pneumatic and hydraulic systemsStrong knowledge of Mechanical Systems, Plumbing, Equip./Troubleshooting, Electronics, ElectricalSystem, Process Flow/Maintenance Systems, Pneumatic, Hydraulic, Scale, Printer Repair, and/orprogrammable logic controllersMath skills including but not limited to fractions/decimals, addition, subtraction, multiplication and divisionAbility to work on weekends and holidaysPreferred QualificationsSAP ExperienceConsidered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement.Equal Opportunity Employer, including Disability/Vet

Overview: SimVentions is a 100% employee-owned business and has consistently been voted one of Virginia's Best Places to Work. We are looking for an experienced Journeyman Model Based Systems Engineer to provide engineering support for the Tomahawk Weapons System program. You will serve as part of a team that creates Cameo models of the system, its software, and its components. The team consists of Government and contractor personnel. Meetings will periodically take place on Dahlgren Naval base and our Dahlgren office, but technical work will primarily occur in either our Fredericksburg or Dahlgren office (not on base). 1-2 days of telework per week is possible. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: Ability to obtain Secret Clearance (United States Citizenship)Modeling experience (e.g., Cameo, MagicDraw, CORE, or GENESYS)5 years of technical experienceWorking group or IPT experience Responsibilities: Learn the systemUtilize MBSE tools (primarily Cameo) to develop modelsPerform scripting to export model information into other formats (e.g., Word)Provide inputs at technical meetingsReview co-workers work and provide constructive feedbackLearn and provide suggestions on processes Preferred Skills and Experience: Familiarity with white box and black box conceptsExperience routing an Information Support Plan (ISP)Scripting proficiencyExperience working with Navy weapons system requirementsFamiliarity with Agile development methods such as Kanban Education: A Bachelor of Science (BS) degree from an accredited college or university in an engineering, scientific, or technical discipline OR 4 years of experience in lieu of a degree Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements.The projected annual compensation range for this position is $85,000 - $130,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs.We offer:Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Why Work for SimVentions : SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together.Support Our WarfightersSimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world.Drive Customer SuccessWe deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving BackWe believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year.Build Innovative TechnologySimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success.Work with Brilliant PeopleWe don’t just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture.Create Meaningful SolutionsWe are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve.Employees who join SimVentions will enjoy additional perks like:Employee Ownership:Work with the best and help build YOUR company!Family focus:Work for a team that recognizes the importance of family time.Culture:Add to our culture of technical excellence and collaboration.Dress code:Business casual, we like to be comfortable while we work.Resources: Excellent facilities, tools, and training opportunities to grow in your field.Open communication:Work in an environment where your voice matters.Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development.Employee Appreciation:Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more.Founding Partner of the FredNats Baseball team:Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite.Food:We have a lot of food around here!FTAC

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation starting from$24 - $33 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Read plans to perform necessary workPerform layoutsPerform take-offsDraw and measure tie-insMaintains a complete set of tools Qualifications: ADDITIONAL RESPONSIBILITIESResponsible for assets used on job siteHolds a valid driver’s licenseMake purchases at local supply houses according to Company procedureOther duties as assignedEDUCATION AND EXPERIENCECompleted a four-year apprenticeship in specified field.Journeyman’s licenseCFC UniversalsExperience with rectangular, spiral, and oval duct assembly and installation.Minimum two+ years commercial HVAC sheet metal experience as a mechanic.KNOWLEDGE, SKILLS, AND ABILITIESAbility to understand written sentences and paragraphs in work-related documentsAble to use logic and reasoning to identify the strengths and weaknesses of solutions and approaches to problemsAble to perform mathematical calculationsKnowledge of tools and equipment needed to complete a jobPHYSICAL AND MENTAL JOB REQUIREMENTSAble to lift up to 60 pounds.Spend long periods of time standingAbility to climb ladders to perform workWork in high elevationsWORKING CONDITIONSPeriodic travel to multiple job locationsMay be subjected to inclement weather and hazardous working conditionsWork weekend or night-time duty, as needed Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

ABM is looking for an HVAC Project Manager who is goal oriented, self-motivated and has demonstrated leadership skills. As the Project Manager, you will manage the skilled trade personnel (HVAC Installation Technicians and Subcontractors) who perform retrofit or replacement of our customer's mechanical systems and equipment on projects under $3.0M. Responsible for the day-to-day operation and administrative of project activities at multiple buildings within a regional territory. Develops and implements cost control measures and schedules to ensure project compliance with customer specifications / contract requirements for all regional projects. Oversees scheduling, execution, personnel needs, subcontractors, equipment and supplies for each project, forecasting and quality control within the assigned regional territory. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visitABM Employee Benefits| (Programa de Beneficios de ABM) Essential Functions Coordinate retrofit and replacement projects for assigned regional territory.Ensure that projects are performed as contracted and at the intended profit margins.Control supplies, equipment, and personnel necessary to meet project and customer specifications.Interact with customers as require for each project to obtain feedback on the projects and special needs.Troubleshoot potential problems and concerns.Manage the company’s quality control monitoring and safety programs at the assigned buildings.Conduct quality of installation inspections for projects within assigned regional territory.Attend ABM training workshops when scheduled.Develop operational improvement plans and implements process changes for projects and project team within assigned regional territory.Ensure compliance with company policies and procedures and all federal, state and local government regulations.Ensure that all paperwork, including terminations, labor variance action plans, and operational models is complete and accurate and is submitted to the district/hub in a timely manner.Analyze and manage, in a proactive manner, both the financial and the operational performance of projects within assigned regional territory.Ensure that payroll is accurate and submitted to the appropriate payroll personnel in a timely manner and, whenapplicable, correct any payroll discrepancies.Work with General Manager to develop an action plan for all invoices that are outside of the contractual parameters.Ensure that vehicle inspections are performed monthly.Ensure that vehicle maintenance is scheduled and performed on all area vehicles.Manage and provide leadership to Supervisors, and Lead personnel assigned to projects within the regional territory.Responsible for directing work; appraising performance; rewarding and disciplining subordinates; addressing complaints, resolving problems, and terminating employees.Perform other duties as assigned *Job duties may be modified at any time. Qualifications 10+ years in HVAC Service operations requiredMust have a minimum of 5 years of supervisory experience in a service and projects oriented environment.Education and/or training in any or all of the following: electronic/mechanical systems, HVAC, chillers, boilers, building controls systems requiredHigh School Diploma / GED requiredBachelor's Degree preferredAdditional certifications are strongly preferred: EPA Certification, OSHA certified, Master HVAC License, and other technical trainingsExperience in cost estimating/pricing work required.Must have working knowledge of OSHA safety regulations and chemical handling/storage procedures.Must be able to write reports and business correspondence and effectively present information and respond to questions from managers and customers.Valid driver’s license.PMP Certification (preferred)Intermediate skills with Microsoft Office applications (Word, Excel, Outlook, MS Projects)Basic skills in CMMS software preferredStrong verbal and written communication skills and strong interpersonal skills are required. #200About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call . We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Clean HarborsPrince George, VAis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet.Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesPay is based on experience $28-$35 an hour! Overtime paid after 40 hours at $42-$52.50 hourly!Opportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingSpeak with a recruiter today to learn more!!Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business.What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today!To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.“2022 Top Company For Women To Work For in Transportation”*CH#LI-KB1

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's What We HaveToOfferWhat we offerCompetitive pay Paid vacation/holidays/sick time 10 days of vacation firstyear!Comprehensive benefits package including 401K, medical, dental, and vision careAvailable day one!Extensive product and on-the-job/cross-training opportunitiesWithoutstanding internal resources!Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, tools, and equipmentprovidedto complete all jobs.JCI Employee discount programs (The Loop by Perk Spot)Check us Out:A Day in the Life of the Building of the FutureHow you will do it:Creation Contract Specific Bills of Material and Part Requisitions.Completion and release of Food and beverage Quantum Panel Sales Order engineering.Completion and release of YPS Quantum Retrofit Panel Sales Order engineering.Load order specific information into Access Data base related to Panel Sales Orders.Creation Contract Specific electrical schematics and panel assembly drawings.Check and Approve drawings and bills generated by engineering co-workers consisting with ISO requirements.What we look for:Associate Degree or 3 years’ experience in Electrical Controls or Industrial Refrigeration.Microsoft Office 365Proficient in Excel and AccessPreferredAutocad / Autocad Electrical ExperienceRead and understand technical drawings of components such as instruments, control panels, starters, etc.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.

Overview: GovCIO is currently hiring for a Senior Network Architect/SME in Enterprise Level Facilities Security and Industrial Control Systems and Networks for our NIH-CIT proposal. This position is located in Bethesda, MD and is a remote/hybrid position. Responsibilities: The SME role’s responsibilities include:Coordinate with the Section Manager to evaluate, design, and test architecture designs and services from the roadmap backlogLead the transition of user accepted designs and services to the Operations and Security TeamsProvide subject matter expertise in Enterprise-level facilities securityProvide subject matter expertise in Enterprise-level industrial control systems networks (i.e., Supervisory control and data acquisition (SCADA) networks)The Network Architecture role's responsibilities include:Strategically plan, architect, design, engineer, develop, test, implement, modernize, and enhance the functional capabilities, capacity, and performance of the NIH Network and TIC Services in alignment with NIH future state architecture objectivesSoftware and hardware installation, configuration, upgrades, and maintenanceTeam with the Security Section to achieve security architecture requirementsMaintain technical architecture documentationTroubleshooting and problem resolutionChange managementSupport resources responsible for security implementation, monitoring, maintenance, and vulnerability remediationStrategic Transformative planning for network architecture services Qualifications: Bachelor's with 12+ years (or commensurate experience)Required Skills and ExperienceCCIE Certification: Written and practicalWithin each of the Cisco Certifications, the following specializations are needed and listed in order of importance: Routing and Switching, Service Provider, Data Center and WirelessClearance Required: Must be able to obtain and maintain a Public Trust clearance.Preferred Skills and Experience: Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $108,310.00 - USD $149,027.00 /Yr.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.Come join us to create what’s next. Let’s define tomorrow, together.DescriptionFind your future at United! We’re reinventing what our industry looks like, and what an airline can be – from the planes we fly to the people who fly them. When you join us, you’re joining a global team of 100,000+ connected by a shared passion with a wide spectrum of experience and skills to lead the way forward. Achieving our ambitions starts with supporting yours. Evolve your career and find your next opportunity. Get the care you need with industry-leading health plans and best-in-class programs to support your emotional, physical, and financial wellness. Expand your horizons with travel across the world’s biggest route network. Connect outside your team through employee-led Business Resource Groups. Create what’s next with us. Let’s define tomorrow together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeQualificationsUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What’s needed to succeed: Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contactto request accommodation.The starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Overview: Pine Dental and Braces Orthodontic Assistant Full Time Monday, Tuesday, Wednesday and Friday 8:45am-5:30pm Thursday 8:45pm-2pmMaryland x-rays and Ortho License requiredBilingual preferred not requiredOrtho experienced required Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Get out into your community -- participate in local events including school screenings, presentations and any opportunity to promote a positive image of us Participate in morning huddles (hey, even ask to run one!), let your peers know how much you appreciate them, highlight great examples of customer focus, collaboration etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) Preferred at least 1 year of experience in Orthodontic Assisting CPR/BLS Certification Required Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Monthly bonuses based on Office performance Comprehensive Benefits Package: Medical, Dental, Vision, 401K with match, flexible spending accounts, paid time off, company holidays and much more! We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: Hogan & Sons Tire and Auto- We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The Senior Automotive Technician / Mechanicis responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s and company standards.COMPENSATION: Up to $45 Flat Rate + $1,500 Sign-On BonusAutomotive Technician / Mechanic Benefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceHealth/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:High School Diploma or equivalentPrefer a minimum of one active ASE or equivalent experience or trainingPossess valid driver’s license, or obtain a valid Virginia driver’s license within 30 days of hire dateAbility to work a minimum of five days, including SaturdaysSun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

As an Amazon Critical Infrastructure Engineer, you will provide full life-cycle support to AWS Data Centers from design inception through site improvement and maintenance. You will be the ‘go to’ engineering resource for your region when technical advice is needed, and will use your subject matter expertise and engage with diverse teams to:* Troubleshoot, conduct Root Cause Analysis (RCA) and create Corrective Action (CA) documentation for site/equipment failures.* Directly support operational issues with ad-hoc training, complex operating procedure reviews, including critical equipment, and event support.* Own the conceptual design for existing data center upgrades and design-solutions, which add capacity, improve availability, increase efficiency and sustainability.* Interface with internal data center operations team, data center design engineering team, server hardware team, environmental health and safety team to promote standards that maintain consistency and reliability in services delivered.* Develop innovative solutions for AWS’s data centers.* Work on concurrent projects, sometimes in multiple geographical regions.* Initiate and lead engineering audits including on-site visits within Amazon’s data centers. Produce reports outlining risks with recommended mitigations and remediations.* Act as resident engineer during new construction projects. Support construction, commissioning, and turnover.AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help.You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.Key job responsibilitiesAmazon's vision is to be the world's most customer-centric company, and this role is key to that vision. As an Amazon Critical Infrastructure Engineer, you will be leading projects to fit out our data centers tomeet ever-evolving customer needs as we continue expanding our fleet to hyper-scale. As an ideal candidate you:• Possess Strong Engineering Judgement and are able to provide recommendations despite uncertainty/ambiguity.• Are detail and data oriented.• Have experience solving problems with engineered solutions.• Have experience managing engineering projects and consultants.• Build trust and relationships with different stakeholders (e.g., Operations, Controls, Construction, Design, Commissioning, Product Managers, Technical Program Managers, ).• Are adaptable and inclined to get into the field to see things up close.• Excited about a mix of office and field work.A day in the lifeEach day you will interact with different teams responsible for all aspects of the data centers. You will prioritize your activities to support data center capacity availability and safety focusing on the actions that are most impactful. You will have the opportunity to work on projects locally and globally.If you meet these qualifications, exude passion, and enjoy the challenge of innovative projects at hyper-scale, this job is for you! About the teamWhy AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Diverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS• Bachelor’s Degree in Mechanical Engineering or equivalent experience.• 3+ cumulative years of experience with industrial, municipal, or commercial engineering including but not limited to the following sectors: data centers, power generation, oil/gas facilities. (Experienced Engineer)• Must have a valid US driver's license and reliable personal transportation by start datePREFERRED QUALIFICATIONS1. Direct experience with the design, construction, operation, or maintenance of mission critical facilities, especially data centers.2. Experience as resident engineer or hands-on (in the field) design consultant or owner’s engineer.3. Experience reading and interpreting, construction drawings, specifications, submittal documents, and applicable building codes.4. Ability to carry design concepts through exploration, development, and into deployment/mass production5. Basic understanding of both mechanical and/or electrical equipment/design related to data centers (Including but not limited to: uninterruptable power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers [air-cooled and water-cooled], pumps, cooling towers, heat exchangers, CRAHs, fans, air economizers, water treatment, etc...)6. EPMS/SCADA/BMS Controls system experience (software and/or hardware)Amazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Securitas Technology and Solutions groups are experiencing tremendous success, and we currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on Securitas Technology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.Securitas Technology is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. Securitas Technology security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities.Position Description:Installs intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Electronic Security policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested.Job Requirements:MUST HOLD 3 or more years' experienceinstalling and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systemspreferred.NICET Certificationpreferred.Lenel, Pro-Watch, Software House, Picture Perfect certificationspreferred.Bosch, Honeywell, Radionics, or DMP system knowledgepreferred.Edwards/EST, Simplex, or GE/Mirtone system knowledgepreferred.IP Video and IT experiencepreferred.Climb ladders that extend up to 24 ft. inheight.Carry items up to 75pounds.Ability to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.The following states require specific statesecuritylicensing requirements:Washington, Oregon,and Oklahoma. Check with local branch for licensing requirements.Benefits:Highly competitive salaryCompany VehicleCompany Cell PhoneMedical, Dental, Vision,and Life InsuranceCompany Paid Short TermDisability401K with 60% MatchPaid vacation, holiday, sick,and personal daysEducational AssistanceExceptional growth opportunitiesWe are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will?maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations).?Automotive Technicians?must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you! Automotive Technicians must be willing to work 2ndor 3rdshifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided.?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required,?throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Meets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A Commercial Driver's License (CDL) - PreferredWorks?full time shifts: 8-10 hours per day, 4-5 days per 7-day week Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Must be currently located in the same geographic location as the job or willing to relocate yourself - RequiredJOB LOCATION: WINCHESTER (VAWCH)Starting Hourly Rate: $38.52Note: For union-represented postings, wage rates and ranges are governed by applicable collective bargaining agreement provisions.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTechseeks a motivated, career and customer-orientedEnterprise IT Support Officer (EITSO) - Installer (Switch Technician / VIST) to join our team inHerndon, VA. In this role, you will support a Dedicated Support Team supporting the Voice Program Recap Office (VPRO) installing network equipment, telephones (VoIP, analog, ISDN), voice media gateways and associated service modules.Responsibilities include, but are not limited to:Offer continued support to customers for troubleshooting and assisting with advanced features or issues related to the voice communication system to include but not limited to, assigning phone numbers, phone templates, voicemail, line appearances, call forwarding and other issues they may have.Provide technical support to end-users in the field and other IT staff in troubleshooting voice-related issues. Escalate complex problems to higher-level engineers or vendors when necessary.Performing high quality installations and troubleshooting a variety of telephones, running and terminating cables to voice switch equipment.Dressing cabling appropriately according to industry and Sponsor standards.Mounting voice and network equipment in racks, running and connecting both power and service cabling as appropriate.Local travel may be required between customer buildings or temporary assignment to an alternate location in support of special projects.Member of a team comprised of a variety of skills that provide coverage from 6:00 a.m. – 6:00 p.m.Minimum Qualifications: Bachelor’s Degree and 4+ years of experience, or a combination of education and work experience equivalent to 8+ years.Experience installing and troubleshooting telephone instruments and media gateways on the Sponsors classified and unclassified networks.Experience with configuring and troubleshooting telephony hardware, including IP phones, voice gateways, PBX systems, and voice servers.Understanding of call routing, dial plans, call forwarding, and voicemail systems configuration.Experience in a variety of cabling areas including 110 type cross connections, RJ45 patch panels, wire wrap terminals, copper cable terminations, DSX Panel T-1 cabling, fiber terminations.Excellent knowledge of various cabling methodologies, industry standards, troubleshooting techniques, and reading/understanding cable run lists.Preferred Qualifications:Experience with implementation on the Sponsor's new unclassified network LAN infrastructure.Related work experience in IT hardware and cabling installation.Experience in managing multiple installations or upgrades simultaneously, meeting deadlines, and coordinating resources effectively.Strong communication skills due to variety of groups to be working with, such as co-workers, management, and customers; must be able to exchange accurate information. Ability to adapt to quickly changing tasks and requirements and the ability to quickly learn new skills while on the job.Clearance Requirements:Must have a current/active TS/SCI with Polygraph.Physical Requirements:Must be able to remain in a stationary position at least 50% of the time. Constantly operate a computer, phone, and other office equipment for extended periods of time.Must be able to move/traverse within and between buildings and offices, position self to maintain equipment and cabling, including under the desks, while moving floor tiles, and in server closets, some of which may be confined spaces.Must be able to move Audio/Visual or Computer equipment weighing 50+ pounds, some equipment may require team-lift or the use of carts. Ascends/descends a ladder, 10+ feet high while pulling cables and adjusting equipment.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time -Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]Check us Out: A Day in a Life at Johnson ControlsPlant Operations https://youtu.be/cjZpE51xySYWhat you will doSuccessful applicants will have a good understanding of standard technical principles, theories, concepts, techniques, and processes. Has a working knowledge of AutoCAD and Drafting standards and applies them towards the execution of Sales Orders or ECNs. Capable of creating and modifying diagrams, piece part drawings and simple assemblies. Has a basic understanding of electrical symbology, geometric dimensioning, and tolerance principles.How you will do itRead and understand technical drawings of components such as instruments, control panels, starters, etc.Work with Engineers, other design personnel and shop personnel to insure proper design.Develop wiring diagrams using AutoCAD Electrical 2024 (Bentley, Plant 3D or Inventor experience a plus).Develop 2D plan, elevation and section drawings of control panels using AutoCAD Electrical. Includes mounting components, terminal blocks, associative dimensioning and avoiding interference between equipment.Develop and implement designs for conduit and/or cable tray installations.Develop bills of material using MS Access database and web-based configuration tools.Check other drawings (peer checking).Work with Operations group personnel to answer questions, make corrections, etc.The ability to multitask and an attention to detail are a must.RequiredRequires an AS degree or equivalent from college or technical school or two (2) years related experience in electrical machinery design. Requires CAD education or equivalent experience. Personal computer working capabilities include email, browser, MS Word, MS Excel, etc.About Us: Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou

Overview: Hogan & Sons Tire and Auto- We provide a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The SeniorAutomotive Technician/Mechanic is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers and company standards.COMPENSATION: Up to $50 Flat Rate + $2,000 Sign-On Bonus!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:High School Diploma or equivalentPrefer a minimum of one unexpired ASE or equivalent experience or trainingPossess valid driver’s licenseMust be at least 18 years of ageAbility to work a minimum of five days, including SaturdaysAutomotive Technician / Mechanic Benefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help.You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.Do you dream of working in a role where your talent with building HVAC and plumbing design and next-generation data center design can be merged Do you want to expand your current knowledge of building systems while providing input from your previous experience Have you ever wondered what it is like to be able to influence construction on a global scale YES! Then keep reading.In this role you will influence all aspects of Mechanical design, construction, operations, and maintenance for our global fleet of data centers. This includes fire suppression, fire detection, fire alarm, and mass notification systems, as well as fire-resistant construction and life safety. You will work with internal and external teams to define, design, detail, and document the various Mechanical features that our facilities require, using both prescriptive and performance-based design approaches. As an Owner, you will strive to ensure the Mechanical features of our buildings protect our people and keep our customer’s data safe and uninterrupted over the life of the building. We expect you to contribute your expertise to the continual improvement of our Mechanical design standards.Primary responsibilities will be to perform and oversee project-related work, such as water supply analysis and design for fire water service to buildings, including coordination with utilities and fire officials to establish basic site infrastructure requirements. The ability to coordinate Mechanical system space requirements, supporting utilities, and equipment locations, and to provide detailed construction specifications for all Mechanical-related trades will be expected. You will typically be responsible for the preparation of detailed designs for HVAC, plumbing, and hydronic systems. You will review all design disciplines to ensure they meet the code requirements described in our design standards. In some cases, you will oversee and review this work and in other cases you will perform the work yourself. As the team’s subject matter expert, you will ensure that contractors have the information they need to build our data centers the way we expect them to, and that our operations teams are well equipped to operate and maintain them as needed to meet our goals. As part of this role you will work with internal and external stakeholders, including design, construction, commissioning, operations, vendors, and other service providers, as well as local building and fire officials. You will be part of a global team, and you will be an integral part of our work to change the world through technology.Key job responsibilities• Driving improvement of design standards and project approaches across the organization.• Work with internal and external design teams to review designs in progress to ensure they meet established design standards, local code requirements, and any other requirements of the Authorities Having Jurisdiction (AHJs).• Be responsible for providing high quality Mechanical engineering advice on a wide variety of projects globally while working with local engineering teams to achieve alignment of designs and design objectives.• Coordinating with construction, commissioning, and risk management teams to answer requests for information and value engineering queries.• Be responsible for construction documents, code compliance, design and installation standards, water supply evaluation and assessment, testing, inspections, and submittal review. • This position will require up to 25% travel.About the teamWhy AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Diverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS• Bachelor’s degree in a field related to Mechanical or an equivalent engineering degree in a related field with at least 5 years additional qualifying experience.• Cumulative 10+ years of experience in design engineering or the construction industry, related to all aspects of Mechanical, including hydronics, air side duct design, and plumbing design• Experience applying local codes, International Code Council (ICC) requirements, and other Mechanical industry standards, procedures, and methodologies. • Experience with processes of design review, specification, development of design standards, and submittal review.• Ability to read and understand construction documents for all trades (design drawings, control diagrams, specifications, etc.). PREFERRED QUALIFICATIONS• Experience authoring white papers, technical documentation, and training materials• Experience directly related to construction of data centers, critical medical, industrial, construction, oil and gas, or large-scale mechanical and power systems.• Strong knowledge of ICC Codes, and other Mechanical industry standards, procedures, and methodologies. • Experience in the development processes for codes and standards• Experience with performance-based alternatives to prescriptive Mechanical design.• Professional Engineering license, NCEES RecordAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTechseeks a motivated, career and customer-orientedEnterprise IT Support Officer (EITSO) – Equipment & Video Installation Technician to join our team inHerndon, VA. In this role, you serve on a Dedicated Support Team of Network Video Installers supporting the StreamIT project. You will install network equipment, video media gateways and associates service modules.Responsibilities include, but are not limited to:Interface with end customers, providing expert support for classified and unclassified LAN infrastructure, including scripting, configuration, and troubleshooting.Manage IP network architecture, ensuring compliance with current and future standards for efficient integration and performance.Perform precise installations, cable terminations, and equipment mounting (e.g., video switch, network, and set-top boxes) to ensure seamless operation.Diagnose and resolve technical issues related to video services, leveraging advanced troubleshooting techniques.Conduct site surveys, ensuring accurate data collection and validation for engineering and VSIT teams, with adherence to sponsor and industry standards.Local travel will be required between customer buildings.May have supervisory responsibilities.Minimum Qualifications:BA/BS and 9 years of experiences, or a combination of education and work experience equivalent to 13 years. 9 years of direct experience installing and troubleshooting video equipment and media gateways on the Sponsors classified and unclassified networks.Expertise in implementing infrastructure networks, including classified and unclassified LAN environments for the sponsor, with proficiency in scripting, configuration, cutover, and troubleshooting.Skilled in installing and troubleshooting video and media gateways on both classified and unclassified sponsor networks.Extensive experience with diverse cabling systems, including 110-type cross connections, RJ45 patch panels, wire wrap terminals, copper cable terminations, DSX Panel T-1 cabling, and fiber terminations.In-depth knowledge of various cabling methodologies, industry standards, and troubleshooting techniques.Proficient in interpreting and utilizing cable run lists for efficient network setup and maintenance.Preferred Qualifications:Experience with implementation on the Sponsor's new unclassified network LAN infrastructure.Video installation experience.Related work experience in IT hardware and cabling installation.Clearance Requirements:Must have a current/active TS/SCI with Polygraph.Physical Requirements:Must be able to remain in a stationary position at least 50% of the time. Constantly operate a computer, phone, and other office equipment for extended periods of time.Must be able to move/traverse within and between buildings and offices, position self to maintain equipment and cabling, including under the desks, while moving floor tiles, and in server closets, some of which may be confined spaces.Must be able to move Audio/Visual or Computer equipment weighing 50 pounds or more, some equipment may require team-lift or the use of carts. Ascends/descends a ladder, 10+ feet high while pulling cables and adjusting equipment.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Hogan & Sons Tire and Auto- We provide a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The State Inspector will perform state inspections. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career.** REQUIRED: Must have a current/valid Virginia State Inspection Certification and Emissions**Up to $28/hr- Inspector Only (MUST HAVE- VA state safety AND VA Emissions inspector)TECHNICIAN W/ C.R.T (VA state safety AND VA Emissions inspector- Where applicable) up to $45 Flat Rate hourSign on Bonus: $1,000.Set Schedule: Tuesday- SaturdayBenefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceHealth/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Successfully complete inspections on customer's vehicles.Safely transports customers to and from their place of residence or business using the company vehicle.Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle.Operates company vehicle in a safe and courteous manner obeying all traffic laws.Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines.Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager.While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition.Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Qualifications:High School Diploma or equivalentPossess valid driver’s license and pass MVR Screeening.Must be at least 18 years of ageCurrent Virginia state inspector's license + Emissions.Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there isALWAYS something to do. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTechseeks a motivated, career and customer-orientedEnterprise IT Support Officer (EITSO) - Installer (Switch Technician / VIST) to join our team inHerndon, VA. In this role, you will support a Dedicated Support Team supporting the Voice Program Recap Office (VPRO) installing network equipment, telephones (VoIP, analog, ISDN), voice media gateways and associated service modules.Responsibilities include, but are not limited to:Offer continued support to customers for troubleshooting and assisting with advanced features or issues related to the voice communication system to include but not limited to, assigning phone numbers, phone templates, voicemail, line appearances, call forwarding and other issues they may have.Provide technical support to end-users in the field and other IT staff in troubleshooting voice-related issues. Escalate complex problems to higher-level engineers or vendors when necessary.Performing high quality installations and troubleshooting a variety of telephones, running and terminating cables to voice switch equipment.Dressing cabling appropriately according to industry and Sponsor standards.Mounting voice and network equipment in racks, running and connecting both power and service cabling as appropriate.Local travel may be required between customer buildings or temporary assignment to an alternate location in support of special projects.Member of a team comprised of a variety of skills that provide coverage from 6:00 a.m. – 6:00 p.m.Minimum Qualifications: Bachelor’s Degree and 4+ years of experience, or a combination of education and work experience equivalent to 8+ years.Experience installing and troubleshooting telephone instruments and media gateways on the Sponsors classified and unclassified networks.Experience with configuring and troubleshooting telephony hardware, including IP phones, voice gateways, PBX systems, and voice servers.Understanding of call routing, dial plans, call forwarding, and voicemail systems configuration.Experience in a variety of cabling areas including 110 type cross connections, RJ45 patch panels, wire wrap terminals, copper cable terminations, DSX Panel T-1 cabling, fiber terminations.Excellent knowledge of various cabling methodologies, industry standards, troubleshooting techniques, and reading/understanding cable run lists.Preferred Qualifications:Experience with implementation on the Sponsor's new unclassified network LAN infrastructure.Related work experience in IT hardware and cabling installation.Experience in managing multiple installations or upgrades simultaneously, meeting deadlines, and coordinating resources effectively.Strong communication skills due to variety of groups to be working with, such as co-workers, management, and customers; must be able to exchange accurate information. Ability to adapt to quickly changing tasks and requirements and the ability to quickly learn new skills while on the job.Clearance Requirements:Must have a current/active TS/SCI with Polygraph.Physical Requirements:Must be able to remain in a stationary position at least 50% of the time. Constantly operate a computer, phone, and other office equipment for extended periods of time.Must be able to move/traverse within and between buildings and offices, position self to maintain equipment and cabling, including under the desks, while moving floor tiles, and in server closets, some of which may be confined spaces.Must be able to move Audio/Visual or Computer equipment weighing 50+ pounds, some equipment may require team-lift or the use of carts. Ascends/descends a ladder, 10+ feet high while pulling cables and adjusting equipment.

Additional Job Info: This position offers a base hourly range of $19.73 - $34.62 per hour, depending on experience and qualifications, plus bonus based on company performance.One of the MANY work perkz at Sheetz is quarterly employee bonuses based on company performance! And there’s more – A LOT more like competitive salaries, PTO and parental leave, 401k match and employee stock ownership, limitless professional development and growth opportunities, tuition reimbursement, full medical, vision and dental coverage, and snack discounts! Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTechseeks a motivated, career and customer-orientedEnterprise IT Support Officer (EITSO) – Equipment and Telephony Installer to join our team inHerndon, VA. In this role, you support a Dedicated Support Team supporting the Voice Program Recap Office (VPRO) installing network equipment, telephones (VoIP, analog, ISDN), voice media gateways and associated service modules.Responsibilities include, but are not limited to:Performing high quality installations and troubleshooting a variety of telephones, running and terminating cables to voice switch equipment.Dressing cabling appropriately according to industry and Sponsor standards.Mounting voice and network equipment in racks, running and connecting both power and service cabling as appropriate.Performing surveys as necessary to collect or validate information for the engineering or VSIT personnel.Local travel will be required between customer buildings.Minimum Qualifications:BA/BS and 7+ years of experiences, or a combination of education and work experience equivalent to 11+ years.Minimum 10 years of experience with implementation of the following infrastructure networks:Sponsor's classified LAN infrastructure (including scripting, configuration, cutover and troubleshooting)Sponsor's unclassified LAN infrastructure (including scripting, configuration, cutover and troubleshooting).Minimum 10 years of experience installing and troubleshooting telephone instruments and media gateways on the Sponsors classified and unclassified networks.Experience in a variety of cabling areas including 110 type cross connections, RJ45 patch panels, wire wrap terminals, copper cable terminations, DSX Panel T-1 cabling, fiber terminations.Excellent knowledge of various cabling methodologies, industry standards, troubleshooting techniques, and reading/understanding cable run lists.Preferred Qualifications:Experience with implementation on the Sponsor's new unclassified network LAN infrastructure.Special non-commercial systems administrator experience (access management/file transfer)VoIP Telephone Installation experience.Related work experience in IT hardware and cabling installation.Clearance Requirements:Must have a current/active TS/SCI with PolygraphPhysical Requirements:Must be able to remain in a stationary position at least 50% of the time. Constantly operate a computer, phone, and other office equipment for extended periods of time.Must be able to move/traverse within and between buildings and offices, position self to maintain equipment and cabling, including under the desks, while moving floor tiles, and in server closets, some of which may be confined spaces.Must be able to move Audio/Visual or Computer equipment weighing 50 pounds or more, some equipment may require team-lift or the use of carts. Ascends/descends a ladder, 10+ feet high while pulling cables and adjusting equipment.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.