Claremont, NH 03743 • (39.6 miles) • Full Time • 10/20/2026

Requirements: High School Diploma or equivalent. Industrial manufacturing experience is preferred. Basic math skills, ability to follow directions, and adhere to all safety and environmental rules and regulations. Ability to work independently and as part of a team, possess a strong work ethic, good attendance history, and ability to adjust to varying temperature changes. Capacity and stamina to work in a physically demanding environment: bend, stand for long periods, stoop, lift/push up to 50 lbs, and go up and down stairs. ProAmpac, located in Claremont, NH, is a 24/7 manufacturing facility that produces rolls of specialty Kraft Paper from 100% recycled material. The rotating swing shift is a uniquely designed schedule where employees work (on average) fifteen, twelve-hour shifts per mon

Bennington, VT 05201 • (15.3 miles) • Full Time • $18.00 to $26.00 / hr • 10/29/2026

Build precision. Protect traceability. Power production. Picture this: a new job order drops. You review the traveler, reserve floor space for deliveries, confirm freezer status in Epicor, and cue the CNC to cut a flawless kit. Where time is tight, you hand-cut, label, and record every detailthen notify the lay-up cell about approaching cure dates. TATS dashboards show every lot accounted for. By shift end, preventive maintenance is complete and the cell is spotless. That’s the impact you’ll makenight after night. Team and Shift Reports to the Production Cell Leader – Lay-up/Kitting. This is a third-shift position with occasional overtime, including potential coverage on other shifts and weekends. Your Core Mission Operate the CNC cutting machine to produce composite material kits for acti

Keene, NH • (28 miles) • Full Time • $40.00 to $65.00 / hr • 10/29/2026

Onsite in Connecticut. Open to candidates willing to relocate or take on a 6+ month assignment. CSS can provide support for housing, meal stipends, and travel to ease your transition. A day in the life You start your shift on the press line, checking a progressive die slated for a high-priority run. You perform pre-run maintenance, confirm the tool is production-ready, and document Tool History and setup notes. Mid-morning, you fabricate a custom fixture and a gauge requested by the area supervisor. After lunch, you partner with a Senior Tool & Diemaker to introduce a new tool into the press area, collaborating on first-piece validation. A setup associate flags a forming issue, and you jump in to troubleshootthen alert your supervisor about machine and tool maintenance needs. Before you cl

Jacksonville, VT 05342 • (11.7 miles) • Full Time • 10/28/2026

Job Title: Scheduler Administrator Location: Wilmington, Delaware, USA Years of Experience: 10 15 Years Job Summary: We are seeking an experienced Scheduler Administrator to manage and maintain our IBM Workload Scheduler (IWS) environments across development, test, and production systems. The ideal candidate will have a strong background in scheduling administration, incident management, and change support, with a proven track record of ensuring successful job execution and adherence to service level agreements (SLAs). Responsibilities: Administer and maintain IBM Workload Scheduler (IWS) environments across development, test, and production systems. Create, modify, and manage job streams, jobs, calendars, schedules, and dependencies. Monitor daily batch operations to ensure successful job

Brattleboro, VT 05301 • (11.8 miles) • Full Time • $70,000 to $110,000 / yr • 10/28/2026

Description: G.S. Precision manufactures critical components for the Aerospace and Defense industries. With 700 employees across four integrated locations totaling 230,000 sq. ft., we draw on 60+ years of experience and cutting-edge technology to deliver consistent, high-quality results. Our Mission & Values : To provide a proud, caring, and safe environment that allows our team to thrive in delivering value to our customers. We encourage creative thinking and problem solving. We grow our company through open communication, strong leadership, and continuous improvement that benefits our customers, employees, their families, and our communities. Our Vision: To be the most trusted global partner in precision manufacturing and assembly of highly engineered mission critical products, recognize

Greenfield, MA • (25.9 miles) • Full Time • $19.00 to $22.00 / hr • 10/28/2026

Position: Wax Injection Press Operator, 1st shift Position Summary Report directly to the wax room department lead person or designated back up. Follow the direction and supervision set forth by the lead person to achieve and accomplish daily goals and expectations. Primary Responsibilities: ·Maintain a clean and safe work environment. ·Wax room employees must be able to produce acceptable PAR performance at all wax room stations. ·All wax room employees will rotate workstations on a mandatory and regular basis to operate all wax injection machines and workstations in the department including assembly. This will ensure adequate cross training is required to cover changing workloads and absenteeism. ·Consistently complete first piece checks and sign off and electronic completion of first pi

Charlestown, NH • (31.4 miles) • Full Time • 10/28/2026

Description Job Title: Production Control Expeditor Department: Production Control | Operations Work Schedule: 9:00am 5:30pm Location: Charlestown, New Hampshire As a Production Control Expeditor at GreenSource Fabrication, you are responsible for ensuring the smooth and timely flow of materials and work-in-progress (WIP) through all stages of production. This hands-on role focuses on identifying and resolving bottlenecks, expediting late or at-risk jobs, and ensuring orders meet both production and delivery targets. The PC Expeditor plays a key role in job preparation and release, material coordination, and workflow monitoring to support continuous operations. Working cross-functionally with production, maintenance, engineering, quality, and logistics teams, the PC Expeditor actively adju

Springfield, VT 05156 • (32 miles) • Full Time • $23.56 to $27.89 / hr • 10/28/2026

Responsibilities: Set-up, operate and maintain a variety of hand and power equipment to produce the company’s products. May also fabricate and modify parts to support product manufacturing. Additional responsibilities may include, but are not limited to sanding, polishing, assembly and shipment packaging. Apply knowledge of mechanics, shop mathematics, material properties and layout to the tool making process. The person is also responsible for inspection and handling of products, equipment and materials. The person is also responsible for working within ISO 9001, AS9100 certified quality management system parameters & procedures. Position requirements: · Two or more year’s wood working experience with exposure to various power tools is preferred. · Strong attention to detail. · Moderate t

Bellows Falls, VT 05101 • (24.9 miles) • Full Time • $80,500 to $106,000 / yr • 10/28/2026

Work Setting: Onsite manufacturing environment in Bellows Falls, VT Compensation: $80,500 – $106,000 base salary Bonus: Annual discretionary bonus plus additional discretionary company 401(k) contribution based on company performance Benefits: Medical, dental, and vision effective Day 1, company-paid life insurance, short- and long-term disability, Employee Assistance Program, 401(k) with company match, optional Aflac benefits Position Summary A leading manufacturer of precision automotive drivetrain components is seeking a Quality Engineer to become the primary engineering resource within its Quality department. Reporting directly to the Quality Manager, this role will support manufacturing quality, supplier quality, new product development, and continuous improvement initiatives while se

North Clarendon, VT 05759 • (41.8 miles) • Full Time • $21.00 to $27.00 / hr • 10/27/2026

Production Support Technician North Clarendon, VT, 05759 Bodycote offers: $1,500 Sign-on Retention Bonus. Paid holidays and paid time off. 401k match, Medical, Dental, and Vision Plans for employees and families. Ability to work full-time, 40 hours per week. Training Hours: 2:15 pm-10:15 pm Monday – Friday for up to two months. Must pass a pre-employment drug screen and basic physical. Our people are the heart of our business. As the world’s largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, including some of the best engineers, scientists, and technicians in the industry. Come join our team! Due to the nature of our business and heavy industrial market, Bodycote deems this position to be safety sensitive. Position Summary:

Arlington, VT 05250 • (21.3 miles) • Full Time • 10/26/2026

Ensures that parts are in compliance with customer specifications and ISO requirements and/or customer component quality requirements; Utilizes measuring devices and applies basic mathematical equations; Performs minor product repairs; Ensures consistency of product quality and identification information prior to shipment to internal or external customer; Properly labels, identifies inspection status, and stores in accepted product per applicable ISO procedures; Processes part requisitions and accurately enters inventory transactions on computer system; May disposition rejected parts as directed by materials group or MRB; Performs cycle counting as required to maintain 98% inventory accuracy; See, reads, and follows work instructions, safety procedures, and completes various reports and fo

Orange, MA 01364 • (36.6 miles) • Part Time • $20.00 to $32.00 / hr • 10/24/2026

At Rodney Hunt, we are problem-solvers, focused on a common purpose: solving flow control challenges of the water & wastewater industry. As a global technology and engineering leader, we provide solutions for customers in industrial and municipal markets. Job Overview: The Quality Inspector will ensure all products and processes meet company standards and customer specifications. The ideal candidate will have Certified Welding Inspector (CWI) credentials (preferred) and proficiency in Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT). The Quality Inspector must have a strong understanding of Non-Destructive Testing methods, and proven expertise in inspection techniques for manufacturing

Bellows Falls, VT • (24.2 miles) • Full Time • 10/24/2026

Work Setting: Bellows Falls, VT Compensation: $80,500 – $106,000 base salary Bonus: Annual discretionary bonus plus additional discretionary company 401(k) contribution based on company performance Benefits: Medical, dental, and vision effective Day 1, company-paid life insurance, short- and long-term disability, Employee Assistance Program, 401(k) with company match, optional Aflac benefits Position Summary A leading manufacturer of precision automotive drivetrain components is seeking a Quality Engineer to become the primary engineering resource within its Quality department. Reporting directly to the Quality Manager, this role will support manufacturing quality, supplier quality, new product development, and continuous improvement initiatives while serving as the technical backup to the

Swanzey, NH 03446 • (28.7 miles) • Full Time • $20.00 to $24.00 / hr • 10/24/2026

Learn the skills of becoming an Apprentice or Master Precaster and join a trade and career you can be proud of. EZ-CRETE is currently looking to add several solid and reliable team members to our amazing precast concrete production crew. Three shifts available Late night shift gets shift differential of +$2.25/hr 40+ Hours a week OT available on an as needed basis Job Description Summary The ideal candidate in this role will perform a wide range of duties in an industrial concrete products manufacturing environment. This individual will be part of a team responsible for safely and efficiently producing premium quality precast concrete products of the highest quality & standards. Responsibilities Strip and clean concrete forms and products Prepare forms for casting Mix, test and pour concre

Charlestown, NH 03603 • (32.2 miles) • Full Time • $55,000 to $65,000 / yr • 10/24/2026

Manufacturing Engineer The Manufacturing Engineer is responsible for continuous improvement and support of the production of current and future product lines. Focus is on improving manufacturing processes, enhancing product quality, and increasing efficiencies. Collaboration with cross-functional teams to design and implement innovative solutions. Key responsibilities include: Process Development & Optimization – Design, implement, and refine manufacturing processes and tooling to enhance production operations. Standardization – Develop flexible work instructions to standardize fabrication and assembly procedures, especially for semi-custom product lines. Testing & Quality Assurance – Design and implement testing equipment and procedures to ensure design validation, maintain quality contro

Claremont, NH 03743 • (39.4 miles) • Full Time • 10/24/2026

Company Description Canam Bridges designs, manufactures and installs steel bridges for major infrastructure contractors across North America. Canam Bridges is a member of Canam Group, which has over 5,100 employees and operates 22 plants in North America, as well as engineering offices in Canada, Romania, India and the Philippines. Job Description MUST BE AUTHORIZED TO WORK IN THE USA SECOND SHIFT Competitive Shift Differential Ensurethat all products receive a uniform and complete finish as specified by the customer’s contract specifications; performsuch work consistent with corporate mission and values and department financial objectives. Essential Functions: Read finishing requirements from blueprints Apply various types of coatings (paint, zinc, etc.) in accordance with customer specif

Orange, MA 01364 • (36.6 miles) • Full Time • $75,000 to $105,000 / yr • 10/23/2026

At Rodney Hunt, we are problem-solvers, focused on a common purpose: solving flow control challenges of the water & wastewater industry. As a global technology and engineering leader, we provide solutions for customers in industrial and municipal markets. Job Overview: We are seeking a hands-on Manufacturing & Process Engineer with deep expertise in sheet metal fabrication and welding . This role combines process optimization with manufacturing documentation, focusing on improving production methods, developing SOPs, and supporting the fabrication of custom-engineered gates and water control systems. Key Responsibilities: Develop, implement, and maintain Standard Operating Procedures (SOPs) for sheet metal and welding processes. Analyze current manufacturing workflows and identify opportun

Orange, MA • (36.5 miles) • Full Time • $42,000 to $55,000 / yr • 10/23/2026

Role: Quality Inspector Location:Orange, MA (locals and relocation is also fine) Visa-USC/GC/GC EAD only.No visa sponsorship is available. Salary range: $42,000-$55,000/year Job Overview: The Quality Inspector will ensure all products and processes meet company standards and customer specifications. The ideal candidate will have Certified Welding Inspector (CWI) credentials (preferred) and proficiency in Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT). The Quality Inspector must have a strong understanding of Non-Destructive Testing methods, and proven expertise in inspection techniques for manufacturing processes. This role will work directly with the QA Manager and Production Manager

Brattleboro, VT • (13.2 miles) • Full Time • 10/22/2026

Who Is Prince? Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make partswe solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. Job Summary The Production Planner / Buyer is responsible for planning, scheduling, and coordinating manufacturing activities to ensure on-time delive

South Deerfield, MA • (34.4 miles) • Full Time • 10/22/2026

Job Title: Assembler Job Description As an Assembler, you work from material lists and assembly drawings to accurately gather components, assemble products, and prepare them for shipment in a fast-paced production environment. You will be cross-trained across multiple sections of the assembly line, performing tasks such as inserting linings, assembling handles and pins, adding foam, packaging, and supporting repair operations. This role involves frequent use of hand and power tools, as well as performing basic tests and inspections to ensure product quality. Responsibilities Work from material lists to gather the correct parts, components, and supplies needed for each product. Read and interpret blueprints and assembly drawings to assemble products accurately and consistently. Retrieve pro

North Walpole, NH 03609 • (25 miles) • Full Time • $19.00 / hr • 10/19/2026

LEN-TEX WALLCOVERINGS 40 YEARS OF CREATING STUNNING COLOR AND DESIGN Summary: Len-Tex Wallcoverings is seeking a skilled Gravure Operator to join our Print Department. The successful candidate will be responsible for press operation and directing Press Tenders in the production of high-quality wallcovering. Key Responsibilities: Confirm that all correct film color, gauge, and quantity will be run in conformance with the production order. Run order sequence in accordance with printing. Confirm print quality at the beginning of each press run with color masters and stop the run when necessary to correct process problems. Confirm quality at the end of the run layout before wash-up. Accurately fill out roll tickets and daily production reports. Review Tenders' work for accuracy and completenes

Brattleboro, VT 05301 • (11.8 miles) • Full Time • 10/17/2026

Title: Mechanical Designer Location: Remote, New England Company: Multi-discipline engineering firm Salary: Up to $125,000, depending on experience, plus a discretionary annual bonus + up to $10,000 sign on, if required The Opportunity Our client is a multi-discipline engineering firm where design coordination happens directly between colleagues rather than across a chain of outside consultants. They are hiring a Mechanical Designer to take HVAC and plumbing design on whole buildings, from concept through to construction administration. This is not a seat where you pick up one package of a scheme that someone else is running. The seat is worked remotely from anywhere in New England. Several of their designers already work this way, so it is an established arrangement rather than an excepti

Bellows Falls, VT 05101 • (24.9 miles) • Full Time • $60,000 to $85,000 / yr • 10/17/2026

Process Engineer – Glass Machining Center Onsite or Hybrid – Bellows Falls, VT Chroma Technology Corp., a world leader in the advanced manufacturing of thin-film optical coatings, has an exciting opening. Are you passionate about precision manufacturing? We're looking for a Process Engineer to join our growing team, where you'll develop and optimize glass machining processes including blocking, coring, milling, dicing, chamfering, and pick-and-place. Experience with diamond turning or semiconductor wafer singulation is a strong plus! JOIN OUR AWARD-WINNING TEAM! Recognized as a Best Places to Work in Vermont. Chroma Technology Corp. is a certified B corporation. We are able to offer an extremely generous package of benefits, rewards, and a value-driven work environment. Join our collaborat

Keene, NH 03431 • (28.1 miles) • Full Time • $65,000 to $75,000 / yr • 10/16/2026

Description: ABOUT US G&H is a world leader in optical designing, testing and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster Somerset, UK with primary operations in the USA and Europe, G&H is recognized for the breadth of their acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic products. G&H is recognized as the preferred source for OEMs in the life sciences, industrial, and aerospace and defense industries, with a history of quality and excellence that dates back over seventy-five years. ROLE The Production Planner is responsible for determining “the what and the when,” coordinating materials, labor and equipment, and prod

Charlestown, NH 03603 • (32.2 miles) • Full Time • $20.00 / hr • 10/16/2026

Join our dynamic team in Charlestown, NH, as a Polisher! We are seeking a detail-oriented and motivated individual to help us maintain the high standards of our products. In this role, you will play a crucial part in ensuring that our items shine and meet our quality expectations. If you have a passion for craftsmanship and a keen eye for detail, we want to hear from you! Location: North Charlestown, NH 03603 Hire type: Full-Time Shift: Multiple Shifts Pay Rate: $20.00 per hour Responsibilities Able to create an outside radius with airtools. Also able to improve micro finish in fillet radius with deburring and finish wheel. Able to improve micro finish in fillet radius area and/or airfoil by removing cutter marks with deburring and finishing wheel. Able to remove machine tool marks, belt s

Winchester, NH 03470 • (28.1 miles) • Full Time • $25.00 to $32.00 / hr • 10/15/2026

Benefits: Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Paid time off About the Role: Innovative Machine in Winchester, NH is looking for a skilled G- code/Conversational CNC Machinist to join their team. If you're passionate about precision machining and thrive in a hands-on manufacturing environment, this is your opportunity to bring your expertise to a company that values craftsmanship and quality. Come be part of a team that takes pride in every part they produce. Responsibilities: Set up, operate, and monitor CNC machines using G-code and conversational programming Write, edit, and optimize CNC programs for mills and/or lathes Interpret blueprints, technical drawings, and engineering specifications Perform in-process inspection using precision me

Jaffrey, NH 03452 • (40.9 miles) • Full Time • $19.00 to $20.00 / hr • 10/15/2026

Salary: $19 - 20 per hour + none Reference: 1178715-4 Job Description: Position Overview: We are seeking a reliable and detail-oriented Assembler to join our production team. In this role, you will build and assemble components through various stages of production according to precise technical specifications and safety guidelines. You will take ownership of your work area, ensure tools and machinery remain in top condition, and uphold consistent quality standards throughout the assembly process. Key Responsibilities Product Assembly: Precision-assemble products across various manufacturing stages using technical guidelines, schematics, and standard operating procedures. Equipment Care & Maintenance: Perform routine preventive maintenance on machinery, troubleshoot minor equipment malfunct

Bennington, VT 05201 • (15.3 miles) • Full Time • 10/14/2026

Position: Production Team Member Employment Type: Part-Time or Full-Time Location: Maine & Vermont $14.42 per hour - $15.10 per hour Are you ready to be a key part of the kitchen team, crafting delicious pizzas and ensuring top-quality food for our customers? American Dream Restaurants, a proud Pizza Hut franchisee, is seeking dedicated Production Team Members to join our team. Whether you’re looking for your first job or a new opportunity, we provide training, growth, and a supportive work environment. What You’ll Do : • Prepare and assemble menu items according to Pizza Hut’s standards and recipes. • Maintain food safety standards, ensuring proper storage, temperature control, and sanitation procedures. • Operate kitchen equipment safely while following all company and OSHA regulations.

North Clarendon, VT • (44.1 miles) • Full Time • $30.00 to $35.00 / hr • 10/14/2026

Description Job Summary: Alliance Group is seeking full-time, experienced Controls Technicians in North Clarendon, VT to join our growing Building Automation/Controls team. This is a field-based position that is responsible for the installation, maintenance, and troubleshooting of various building automation systems. This person will demonstrate in-depth knowledge of HVAC systems, building automation systems, energy management, network communications, and build and maintain strong customer relationships. We are willing to train the right person!! Pay Range: Pay range starts at $30/hour, however , compensation is negotiable and we welcome transparent conversations with qualified candidates. Key Responsibilities Role-Specific Duties: Safely perform scheduled preventive maintenance routines w

Alstead, NH 03602 • (29.8 miles) • Full Time • 10/12/2026

Come join our maple syrup production team! You'll work first shift (6am-2:30pm) Monday-Friday with occasional opportunities for voluntary Saturday overtime when available. Major Responsibilities/Activities Assist Line Leaders in setup for production runs and changeovers. Load containers onto conveyors for filling. Package containers into case boxes. Palletize completed cases according to established pallet patterns. Production area and equipment cleaning as directed. Rework projects including labeling, case boxing, and repalletizing product. Assist in performing periodic inventory counts of products. Report any quality or safety concerns to the Production Manager immediately. Other tasks as requested. Minimum Requirements Basic math-counting, addition, subtraction Reading ability High leve

North Walpole, NH 03609 • (25 miles) • Full Time • $20.00 to $25.00 / hr • 10/9/2026

Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Overview As the front-line representative of the SERVPRO® brand, the Restoration Supervisor demonstrates the company’s Here to Help® commitment to customers and clients. This is done by coordinating, monitoring, and performing work activities on projects to successfully fulfill service needs and facilitate a positive customer experience. Key Responsibilities · Oversee and perform restoration processes as scheduled and ensure quality control · Manage the customer and client experience and overall project satisfaction. Communicate clear expectations to restoration technicians and supervise their activities · Thoroughly document restoration projects s

Walpole, NH 03608 • (24.4 miles) • Full Time • $26.00 to $32.00 / hr • 10/7/2026

Chamberlain Machine is seeking a detail-oriented Senior Quality Control Technician responsible for inspecting precision machined parts, conducting quality assessments, and maintaining documentation of inspection results to ensure that our CNC machined parts maintain the highest level of quality. The successful candidate will have the experience necessary to select and set up appropriate measurement equipment to verify manufactured products against drawing requirements. Position Responsibilities Conduct quality inspections on incoming materials, in-process production, and finished products to determine conformance to defined specifications Read and interpret technical drawings, symbols, and job documentation to ensure all customer requirements and quality standards are met Utilize precision

Fitzwilliam, NH 03447-3227 • (37.8 miles) • Full Time • 10/7/2026

As an Electrical Controls Engineer, you play a vital role in the development of application specific products through electrical design, process development, and production readiness for new and existing OEM programs. ABTech creates, builds and supports industry leading precision motion systems. With growth in our OEM programs, we are currently looking to strengthen our engineering team’s ability to support on-site production. Do you take pride in your work? Do you enjoy working in a team atmosphere? Do you want to work for a company with a supportive culture that values your contribution? Are you looking for an opportunity with potential growth? If this describes you, then let’s talk! Specific duties and responsibilities: Create electrical schematics, panel design, bills of materials, wor

Springfield, VT 05156 • (32 miles) • Full Time • $35.84 to $52.21 / hr • 10/1/2026

Description: The Quality and Risk Management Clinical Specialist will: Act as the lead clinical staff member in Quality, Risk and Compliance department, carrying out a variety of quality and patient safety functions to support the hospitals quality and safety plan and programs. Use clinical nursing knowledge and abilities in data review, to help ensure the continuous evolution of quality and safe care. Requirements: Associate Degree in Nursing (ADN) or certificate from an accredited school of nursing Bachelor of Science in Nursing (BSN) from an accredited school of nursing (preferred) 2 years of clinical experience Demonstrated skills in participating in and/or leading quality initiatives in a hospital setting (preferred) Active Vermont Registered Nurse (RN) license in good standing or com

Greenfield, MA 01301 • (26.4 miles) • Full Time • $190,000 to $210,000 / yr • 10/27/2026

Strategic Finance Position Reporting to CFO! This Jobot Job is hosted by: John Armel Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $190,000 - $210,000 per year A bit about us: Are you a seasoned finance professional with experience in finance transformation within the manufacturing industry? Do you thrive in dynamic, fast-paced environments and possess a knack for strategic planning supporting the CFO? This is an exceptional opportunity to join a highly collaborative team, where you will play a critical role in driving our financial strategy, planning, and forecasting. Why join us? Strategic Finance Position Reporting to CFO! Job Details Responsibilities: As a Finance Manager, you will be at the heart of our operations, leading the financi

Troy, NY 12180 • (40 miles) • Full Time • $30.00 / hr • 10/24/2026

Your dependability, organization, and people skills will shine in this role as you become an integral part of our customer-focused team. We offer competitive wages alongside a rewarding commission plan, and a comprehensive benefits package. Salary Details: $25-30.00/hour depending on experience Schedule: Monday-Friday 7am-4pm and on call rotation every 6 weeks Exceptional Benefits: Competitive benefits package with exclusive privileges Medical, Dental, and Vision insurance Paid Parental leave 401K with a rewarding company match Exclusive Company purchase discounts Comprehensive company-provided training Key Duties and Responsibilities: Safe operation of a Company vehicle in accordance with state and federal DOT laws. Adherence to established safety procedures. Completion of daily service o

Pittsfield, MA 01201 • (39.8 miles) • Full Time • $100,219 to $108,440 / yr • 10/23/2026

Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opp

Cheshire, MA • (30 miles) • Full Time • 10/22/2026

Job Summary Bedard Bros Auto Sales is seeking a reliable, self-motivated, detail-oriented Service Technician to join our team of professionals. The primary responsibilities of the Service Technician are to perform repairs, maintenance, inspections, and diagnostics on automobiles in accordance with the company’s quality standards. The Technician will be expected to work both independently and under the guidance of the Bedard Bros Auto Sales Manager. Compensation & Benefits Compensation: $17 to $39 per hour, paid weekly. Bedard Bros Auto Sales provides our Service Technicians with a comprehensive benefits package including: Health and dental insurance Disability insurance Paid vacation and holiday time 401k Referral Bonus Responsibilities - Diagnose, repair and maintain vehicle components, s

Schuylerville, NY 12871 • (39.8 miles) • Full Time • $18.00 to $20.00 / hr • 10/17/2026

Description: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician for an Internship/Co-Op to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materia

Troy, NY 12180 • (40 miles) • Full Time • $22.00 to $28.00 / hr • 10/17/2026

Petroleum Service Technician Join OWL Services and Build Your Career in Petroleum Equipment Service OWL Services is a leading provider of sales, installation, service, maintenance, compliance, and modernization solutions for fueling and energy infrastructure across the United States. With more than 1,400 field service professionals and 33 offices and distribution centers nationwide, we keep critical businesses operating 24/7/365. We’re growing and looking for experienced Petroleum Service Technicians who enjoy hands-on troubleshooting, working with sophisticated equipment, and solving problems in the field. If you have experience with fuel dispensers, point-of-sale systems, electrical or mechanical equipment, or petroleum service , we want to hear from you. The Opportunity As a Petroleum S

Troy, NY 12183 • (44.6 miles) • Full Time • $23.00 to $28.00 / hr • 10/17/2026

Fire Service Technician DiVal Safety Equipment – Albany, NY Full-time, 7am – 3:30pm Pay Range: $23 - $28 Join DiVal Safety Equipment and be part of a team that values hard work, commitment, positivity, accountability, and prioritizes safety on the job. As a Fire Service Technician, you’ll travel to customer locations and help maintain essential safety equipment. You do not need previous fire-service experience to get started. We provide training. What You’ll Do – Inspect and service fire extinguishers, emergency lighting, eyewash stations, and AEDs Replenish first-aid kits and PPE vending machines Provide professional, high-quality service at customer locations Manage your daily schedule in coordination with supervisors and teammates Arrive at customer locations on time and ready to provid