FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Bus Mechanic Full-time Location: Janesville, WI 4 day work week! Compensation: $26.00 - $32.00 per hour Coach USA has new and exciting career opportunities for Diesel Mechanics at our Janesville, WI location. We are looking for an individual interested in repairing and inspecting company equipment in a cost effective, safe and timely manner.What We Offer: Competitive wage based on skill and experience. Four-day work week after training is completed.Excellent Benefits (medical, dental, vision, short term disability, Life insurance, 401K).Paid Holidays, Vacation, and PTOUniform provided.Tool and boot allowance Responsibilities: Perform basic, routine, and preventative maintenance bus repairs.Diagnose mechanical, electrical, and other breakdowns or failures.Repair or replace malfunctioning components, parts, and other mechanical or electrical equipment.Collaborate with other diesel mechanics on operational repairs, when needed.Demonstrate skills in advanced testing of all vehicle systems.Participate in maintenance training programs required for the job and career development.Complete test drives to make sure all repaired vehicles run correctly and safely.Follow all safety rules and regulations in the performance of work assignments. Qualifications: Must have a valid Class B Commercial Driver’s License (CDL), or ability to obtain within six months of employment.Minimum of 2-5 years of experience as an automotive or diesel technician.Computer diagnostic skills. Possess your own set of tools to perform maintenance tasks.Be able to work in all types of weather conditions, including outdoors.Ability to work weekends and holidays.Pass pre-employment drug screen and background check. To learn more about your next big career change APPLY NOW!Coach USA would love to discuss your qualifications for this position.Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"©

Clean Harbors in Germantown, WI is seeking a Class A CDL Driver (Equipment Operator) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Up to 10% overnight travel, hotel and per diem providedHazmat and Tanker endorsements required, no auto restrictionMonday through Friday schedule, average start time 6 amTypically, a 40–60-hour work week, overtime after 40 hrs.On call as needed Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthPay range $26-28 per hourComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerOperate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)Operate a variety of Class A trucksLoading and unloading of trucksManual labor on site to ensure fulfillment of customer needsProper placarding of vehicles to meet Company and DOT requirements/regulationsMaintain daily logs, time sheets, and various reportsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsValid Class A CDLHazmat and Tanker endorsement required, no auto restrictionAbility to use various mobile devicesPerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experiencePrevious Hazmat experienceAbility to operate a manual transmissionPrevious manual labor experienceClean Harbors is an equal opportunity employer.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH

$18.00 - $24.00/hourSalary is determined by the applicant’s experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. West AllisWisconsinUnited States of America

Become a Service Tech – $1500.00 Sign-On Bonus Included! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $20.00 - $24.00Up to 50% Rent Discount Property Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4548Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining SAS Retail Services, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $15.00 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Essential Duties and Responsibilities: Respond to emergency situations in a professional and efficient manner with a teamwork approach.Solve and handle Guest concerns with a positive attitude and efficient customer service.Interact with Guests on a one-on-one basis or in large groups and maintain professionalism.Communicate and enforce all rider requirements and restrictions. (i.e. height and/or weight restrictions, proper swimwear, proper riding position, etc.)Responsible for the proper and safe operation of rides/attractions in the water park.Deliver friendly and informative announcements to Guests in small and large groups.Maintain a clean work area to promote a safe working environment and help eliminate hazards.Assist with maintaining park cleanliness throughout the day and end-of-day cleaning tasks.Complete attraction certification tests, corrected to 100% proficiency.Complete Witness Statements and/or other required documentation accurately and legibly as needed.Maintain proper grooming and uniform guidelines at all times.Follow and enforce all park policies and procedures in a fair and consistent manner at all times.Maintain all job duties in all weather conditions including, but not limited to heat, cold, sun, rain, and wind.Perform Water Attendant duties and responsibilities as needed. Skills and Qualifications: Minimum Age: 15Must be able to achieve, and maintain, certification as a Shallow Water Lifeguard.Responsible for maintaining all rescue skills at a “test-ready” level.Must be able to swim a minimum of 50 yards non-stop.Must be able to retrieve a 10lb. brick from a minimum of 5 feet of waterMust be able to swim across 10 feet under water.Must be able to exit out of a pool without using a ladder.Must complete a minimum of 4 hours of in-service training per month.Must be able to work varied shifts including days, nights, weekends, and holidays.Must be able to communicate effectively in the English language, including the ability to read, speak, and understand.Must be able to stand in and move through water for periods of time at water depths from 0 to 6 feet.Must be able to stand and walk a minimum of 7 to 10 hours a day over various surfaces.Must be able to continuously kneel, use hand-eye coordination, maintain a minimum of 20/25 vision or have 20/25 corrected vision.Must be able to continuously pull, push, and hold tubes, rafts, and mats.Must be able to lift and carry a minimum of 50lbs. for a minimum of 25 feet over various surfaces.Must have excellent communication skills to interact effectively with guests, co-workers, and leadership.Must be able to work efficiently in a fast-paced environment.Must be willing to work outdoors in various weather conditionsMust be professional, self-motivated, the ability to multi-task and have an enthusiastic attitudeMust have strong teamwork skills and the ability to work with others Other Functions: All other duties assigned or necessary to support the park as a whole. Perks: FREE admission to our park and other Six Flags Parks!FREE tickets for family and friends!Discounted Season PassesDiscounts on Food and MerchandiseEnjoy Team Member Exclusive Events

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Maintenance TechnicianPackaging Corporation of America1600 South Pine StreetBurlington, WI 53105Pay and BenefitsPay Range = $26.08 to 36.96 based on mechanical and electrical skills and experience.Excellent Benefits Package (Health, Dental, Optometry)401K Plan1.5 Pay over 8 hrs. and over 401.5 Pay Saturday and Sunday1.5 Pay Holidays + additional OT over 8 hours on holidaysUniforms ProvidedPCA provides paid training to help technicians advance through the skill levels and achieve higher pay.Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipendsPCA provides Uniforms for Maintenance TechniciansResponsibilitiesThis position is based at the PCA Box Plant located in Burlington, Wisconsin.This position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are multicraft and training is provided to develop these skills.Basic Qualifications2+ Years’ experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus.All applicants must apply at Careers.packagingcorp.com to be considered. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories.

JOB DESCRIPTIONPersons employed as a Facilities Maintenance Technician is expected to:Perform cleaning activities such as dusting, mopping, collecting trash, etc.Perform minor fixes such as repairing broken locks, filling gaps on walls etc.Maintain and inspect electrical circuitryInstall appliances and equipmentConduct maintenance tasks such as replacing light bulbsInspect and troubleshoot equipment and systems (e.g. ventilation)Check functionality of safety systems (e.g. fire alarm)Collaborate with workers and other professionals during renovationsReport to a facilities or maintenance manager for issuesInstall and/or repair heating and refrigeration units.Paint interior and exterior surfaces.Perform custodial duties as necessary.Assist in preparing job estimates as required.Follow safety policies and procedures.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Read and comprehend instructions, short correspondence and memos.Write routine correspondence.Effectively present information on a one-on-one and small group situations to customers, clients and employees.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Deal with problems involving a few concrete variables in standardized situations.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Basic knowledge of HVAC, plumbing and electrical systemsExperience using hand and electrical toolsAbility to read technical manuals and drawingsVery good communication and interpersonal skillsPhysical stamina and dexterityQUALIFICATIONSTo qualify for this position, applicants and those in the roles must have:High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience.Minimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior facility maintenance experience preferred.Must possess a valid state driver’s license.Successful completion of an apprenticeship is preferred.Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $18.00 to $21.67 / hour.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family!***$5000 Hiring Bonus***At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents.POSITION PURPOSE/MISSION:In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups.PHYSICAL REQUIREMENTS:Constant standing.Frequent lifting up to 10 lbs.Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking.Minimal climbing, foot use, and lifting up to 120 lbs.Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis DatabaseMINIMUM QUALIFICATIONS:High School Diploma or GED.Accredited maintenance apprenticeship or two years technical training with two plus years’ industrial electrician experience.Five plus years’ industrial electrician experience or equivalent combination of education and experienceDemonstrated ability toread and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications.Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems.Knowledge of medium voltage power distribution systems.Knowledge of drives, controls, motion controllers, PLCs, and/or motors.Understanding of national electric code (NEC) and NFPA-70E.Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner.Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical proceduresGood verbal and written communication skills.Ability to follow and give instructions.Ability to work well with other employees.Proficient in basic computer skills.Knowledge of lockout/tagout procedures.PREFERRED QUALIFICATIONS:Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors.Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.)Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors.Advanced knowledge of Proportional Integral Derivative (PID) troubleshooting experience.Machine tool, forklift truck, and crane experience.Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems.Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment)Work experience in a foundry environment.MAJOR ACCOUNTABILITIES:Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues.Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition.Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair.May perform ARC flash program.Layout control panels using schematics and I/O mapping.Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions.Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit.Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment.Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment.Maintain and replace starter, contactors, relays, timers, limit switches, and counters.Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire.Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions.Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books.Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others.Follow Environmental, Quality and Safety Management System procedures and requirements.Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description.#LI-Onsite#LI-ME1The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

About the RoleAs Field Facilities Specialist, you will perform maintenance and handyman services in Kohl's stores, ensuring company brand standards are maintained. You will meet budgets, communicate effectively with both internal and external customers and perform all work in a quality manner, following all safety rules and regulations.What You’ll DoComplete work orders as assigned by supervisor timely and accurateEnsure all necessary materials and tools to perform daily work are available and kept in good condition (Kohl’s will provide all needed tools)Perform interior store repairs and maintenance with a focus on door (interior and exterior) and plumbing (faucet, toilet, water heater, etc.) repairPerform interior lighting and electrical repairs, including lamp/ballast replacement and minor outlet repairsPerform ooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, xture and equipment repairsPerform exterior maintenance of the building, including low elevation, building painting, curb/ramp painting, power-washing, and minor common area maintenance repairs Assist stores with housekeeping problem-solving and suggested solutions for store associate teams and contract cleaning providers to increase CLEAN presence in storesCommunicate safety and cleanliness issues and action plans to resolveIdentify interior and exterior maintenance issues that need resolution by exterior vendors and enter issues into Web Based Facilities Management program for assignment and completionCommunicate recaps regularly to the Territory Facilities Manager and/or Store and District Managers of stores visited, wins and opportunities found and issues resolved on store visitsAdditional tasks may be assignedWhat Skills You HaveRequiredAbility to work independently Effective verbal and written communication skills Pro ciency in Microsoft Word and Excel, navigation of websites and ability to utilize new computer systems, including smartphones2-4 years of prior maintenance work with a strong focus on door, plumbing, electrical/lighting and handyman ServicesPrior retail or o ce building maintenance experienceFamiliarity with general maintenance tools and tasksPreferredAbility to repair a variety of other interior/exterior issues as assigned by Supervisor, including equipment and CAM itemsSpecial RequirementsModerate lifting – 25 to 50lbs on a regular basisAbility to travel up to 100% of the time with some overnight stays based on store schedule/locationAbility to climb/work on ladders up to 12ft in height to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehiclePay Range: $22.85 - $36.55Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Automotive Technician -CDLUPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will?maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations).?Automotive Technicians?must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you! Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided.?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required,?throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Meets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A or B Commercial Driver's License (CDL) - REQUIREDWorks?full time shifts: 8-10 hours per day, 4-5 days per 7-day week Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is$36.52 per hour.For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase programEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Essential Duties and Responsibilities: Respond to emergency situations in a professional and efficient manner with a teamwork approach.Solve and handle Guest concerns with a positive attitude and efficient customer service.Interact with Guests on a one-on-one basis or in large groups and maintain professionalism.Communicate and enforce all rider requirements and restrictions. (i.e. height and/or weight restrictions, proper swimwear, proper riding position, etc.)Responsible for the proper and safe operation of rides/attractions in the water park.Deliver friendly and informative announcements to Guests in small and large groups.Maintain a clean work area to promote a safe working environment and help eliminate hazards.Assist with maintaining park cleanliness throughout the day and end-of-day cleaning tasks.Complete attraction certification tests, corrected to 100% proficiency.Complete Witness Statements and/or other required documentation accurately and legibly as needed.Maintain proper grooming and uniform guidelines at all times.Follow and enforce all park policies and procedures in a fair and consistent manner at all times.Maintain all job duties in all weather conditions including, but not limited to heat, cold, sun, rain, and wind.Perform Water Attendant duties and responsibilities as needed. Skills and Qualifications: Minimum Age: 15Must be able to achieve, and maintain, certification as a Shallow Water Lifeguard.Responsible for maintaining all rescue skills at a “test-ready” level.Must be able to swim a minimum of 50 yards non-stop.Must be able to retrieve a 10lb. brick from a minimum of 5 feet of waterMust be able to swim across 10 feet under water.Must be able to exit out of a pool without using a ladder.Must complete a minimum of 4 hours of in-service training per month.Must be able to work varied shifts including days, nights, weekends, and holidays.Must be able to communicate effectively in the English language, including the ability to read, speak, and understand.Must be able to stand in and move through water for periods of time at water depths from 0 to 6 feet.Must be able to stand and walk a minimum of 7 to 10 hours a day over various surfaces.Must be able to continuously kneel, use hand-eye coordination, maintain a minimum of 20/25 vision or have 20/25 corrected vision.Must be able to continuously pull, push, and hold tubes, rafts, and mats.Must be able to lift and carry a minimum of 50lbs. for a minimum of 25 feet over various surfaces.Must have excellent communication skills to interact effectively with guests, co-workers, and leadership.Must be able to work efficiently in a fast-paced environment.Must be willing to work outdoors in various weather conditionsMust be professional, self-motivated, the ability to multi-task and have an enthusiastic attitudeMust have strong teamwork skills and the ability to work with others Other Functions: All other duties assigned or necessary to support the park as a whole. Perks: FREE admission to our park and other Six Flags Parks!FREE tickets for family and friends!Discounted Season PassesDiscounts on Food and MerchandiseEnjoy Team Member Exclusive Events

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations). Automotive Technicians must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided. AutomotiveTechnicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements and CDL qualifications required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsMeets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass B Commercial Driver's License (CDL) with air brake and fifth wheel - REQUIREDClass A Commerical Driver's License (CDL) preferred.Works full time shifts: 8-10 hours per day, 4-5 days per 7-day weekDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsCompensation and BenefitsOur compensation reflects the cost of labor across several US geographic markets. The starting hourly pay for this position is $36.52 with a top rate of $45.65. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment