FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Details Department: Radiation OncologySchedule: Weekdays 0800-1630. Occasional evening and weekend hours as needed.Hospital: Columbia St. Mary's MilwaukeeLocation: Milwaukee, WIBenefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your communityBenefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance and salary range at the time of the offer.Responsibilities Ensure the quality of care in the use of radiation-producing sources and imaging equipment, while protecting patients and staff from radiation.Perform required calibrations on equipment. Recommends and justifies new equipment and products for the department.Conduct equipment performance reviews as needed and implements quality control procedures for imaging devices.Recommend radiation safety procedures to areas using radiation.Educate staff in radiation safety practices.Support all physics aspects of patient treatment including consultation with radiation oncologists, calculation of radiation doses, design and fabrication of treatment aids and assurance of the accuracy of all treatment parametersRequirements Licensure / Certification / Registration:Medical Physicist credentialed from the American Board of Radiology obtained within 36 Months (3 years) of hire date or job transfer date required.Education:High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required.Additional Preferences No additional preferences.Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve.Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states.Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you.Equal Employment Opportunity Employer Ascension will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, citizenship, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status or status as a covered veteran in accordance with applicable federal, state and local laws.For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish)poster.As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension.Pay Non-Discrimination NoticePlease note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants.This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

WHO YOU WILL WORK WITHYou will work closely with the GM, Product lead, Nike Sports Research Lab lead, Engineering and Design teams, Program Management and Finance, to bring safe and reliable products to market. You will work across the Nike matrix to build support from product testing functions across the company.WHO WE ARE LOOKING FORWe are looking for a Test/Design Verification Engineering Lead to join a newly formed team developing innovative, powered athlete products.WHAT YOU BRINGBachelor’s degree or equivalent combination of education, experience and trainingBachelor’s degree in engineering preferred7+ years of relevant industry experienceDemonstrated ability to effectively work cross-functionally with Product Development, Engineering, QA.Specific experience operating automated test equipment including Instron machines. Electropulse a plus.Experience in validation and experimentation design to prove/disprove system or product functionality, reliability, and specification call-outs.Problem-solving and troubleshooting skills.Interpersonal and written communication skills.Experience with Python and grasshopper a plusResults orientation, team skills, ability to multi-task, ability to learn quickly, ability to respond to urgent needs of the team and deliver expected results within expected deadlines.Ability to serve as a technical resource for assessing validation requirements, solving test related problems, and drawing on resources across the organization to build effective test infrastructure.Proficiency in statistical analysis.Positive energy, curiosity, and a passion for building magical products that users love.Strong technical savvy and understanding/curiosity about emerging innovative technologies.Ability to work in a fast-paced environment where continuous learning is core to our identity.Willingness to roll up your sleeves to win as a team.WHAT YOU WILL WORK ONAs Test / DVE Lead, you will play a critical role in driving the execution of our powered athlete product roadmap. You will be responsible for ensuring that products shipped meet all applicable quality and performance criteria, validating functionality, reliability, and performance of products/prototypes using existing and invented quality metrics.IN THIS ROLE YOU WILL• Validate and test product performance and reliability from creation through production, with specific focus on digital footwear integration.• Participate in definition and execution of consumer product test and validation with specific focus on root-cause analysis of failure modes, and integration of detailed testing as a component in quality product development.• Manage of multiple external vendors/consultants (both domestic and international) in product development and test support, as well as direct interaction with Wear Test Coordinators in the footwear categories supporting management of long term and short-term wear testing.• Develop test procedures and metrics to assess product performance where no best-practice guidelines for testing or qualification exist; develop test and measurement systems as needed.• Drive test/validation methodology improvements, as well as process improvement and feedback to the engineering process. Participate in the early-stage engineering and product development process to provide footwear insight into the design process from the start.• Assist in specification and execution of quality, accuracy, and testing procedures across multiple partners and disciplines including traditional reliability testing, four corner testing, performance validation, and software quality assurance.• Utilize a wide range of appropriate statistical methodologies and techniques to demonstrate quality and efficacy. • Provide input on the equipment/process/software validation requirements and design control activities for new product development projects.We offer a number of accommodations to complete our interview process including screen readers, sign language interpreters, accessible and single location for in-person interviews, closed captioning, and other reasonable modifications as needed. If you discover, as you navigate our application process, that you need assistance or an accommodation due to a disability, please complete the Candidate Accommodation Request Form.

Our client, a broadband telecom service provider, is seeking multipleOSP Designers to join their team. As an OSP Designer, you will be part of the Engineering Team supporting outside plant engineering. The ideal candidate will have strong experience in all areas of engineering, permitting, and quality control for on time delivery of projects. This is a contract status position and will be 100% remotely based work. Candidates must be certified in Aramis/AT&T tools and process.Job Title: OSP DesignerLocation: 100% Remote locationPay: $25-30/hr. plus OT, benefitsKey Responsibilities Engineering implementation on assigned tasks to align with project standardsEnsure the integrity and security of geospatial dataSkilled in handling all aspects of products and servicesProvide insights and recommendations to project documentationEnsure compliance with policy and procedures. Requirements Communicating current project milestone impacts to leads and teamAramis/AT&T certification and accomplished skillsAbility to work independently and report measurable results Conduct regular backups and data auditsEngineer is skilled in handling all aspects of products and services Why should you choose Manpower Engineering Medical, Dental, Vision, 401k with MatchWeekly pay with direct depositHoliday PayReferral RewardsMonthly Recognition ProgramsDedicated Career Partner to help you achieve your career goalsRecognized as World’s Most Ethical Companies in 2023 for 14th year in a row If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of ExperisManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Microgrid Automation Engineer III This position will be the technical lead and programmer for the integration of switchgear automation to G&W Electric's proprietary, grid-scale 2.4 MW microgrid, providing project management and customer support. As an Automation and Microgrid Engineer III you will: Assist with G&W switchgear automation solution proposals that include written functional description and pricing. Apply advanced product knowledge of relays, programming, and communication in switchgear distribution automation applications. Provide pre and post sales technical support to sales/marketing, production engineering, and customers for customized distribution automation solutions.Project Manage Distribution Automation projects from Quoting stage through Customer site acceptance without assistance from supervisor.Design logic, program relays and controllers, and test systems as required for projects.Develop flexible program templates and software solutions that can be combined with hardware for customizable product packages Manage technical relationship with key DA technology vendorsAssist Production Engineering with minor modifications as necessary for specific customer applications.Train and assist customers with installations and commissioning including on-site activities as necessary.Have the ability to function in cross-functional work teams.Make technical presentations to customers, clients, and/or professional peers.Provide technical assistance and training for peers and sales staff.Act as a mentor to new Automation Engineers to ensure they become proficient with LaZer solutions and successfully assimilate into the DA team.Have the ability to perform event analysis for all G&W automation solutions.Work with customers to write and present papers about the G&W automation solution provided to them.Maintain positive client interactions.Keep up to date with industry trends by attending conferences, and training courses. G&W MICROGRID-RELATED RESPONSIBILITIES: Act as in-house expert in all control systems in the Microgrid.Manage vendor relationships, especially with engineering groups.Manage periodic maintenance and testing of all software systems. Perform upgrades as necessary.Monitor microgrid system functionality. Troubleshoot and correct as needed.Support G&W's Microgrid Engineer in day-to-day operations as necessary.Supplement all periodic maintenance performed by Microgrid Engineer and act as a backup.Manage the microgrid operational schedule to maximize the return on investment of use cases while ensuring battery is prepared to support and handle highest priority scenarios.Maintain and be responsible for the G&W Customer Solution Center Microgrid control room.Support all microgrid use cases; especially advanced use cases including islanding, reconnection and DERMS integration We are looking for someone who: Holds a Bachelor's Degree in Electrical Engineering. Has 7+ years of progressive experience in Engineering design and/or development preferred. Preferred technical knowledge: Three Phase power systems including: Symmetrical componentsLoad flowOver current protection functionsRelay integration and logic programming for: SEL, ABB, Hitachi, Siemens and/or GE relaysCommunications including: StandardsFiber Optic Cable Selection and ApplicationRadio Communication and Antenna SelectionCellular Communication and Antenna SelectionTypical primary Voltage and Current test proceduresElectromagnetics and the application of motors, transformers, and generators on the power distribution systemMust have excellent interpersonal skills and ability to communicate with peers and internal and external customers. Has strong industrial / utility programming understanding and skills with a strong preference for relay programming. Has training and/or experience in relays and switchgear and electrical troubleshooting. Possesses knowledge of MS Windows, Word, Spreadsheet and project applications is required.Has the ability to travel overnight 30-40% and on weekends. What we offer you: Typical pay is $83,948 - 109,163 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k) Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

About the RoleAs Data Scientist II, you will work with a data science team and cross-functional partners to solve business challenges, promote data-driven decision-making with advanced data analysis and machine learning and develop products that strongly impact Kohl’s revenue and customers. As a senior member of the Data Science organization, you will be the technical expert for a team that builds models for initiatives such as recommender systems, NLP, image recognition, segmentation and user behaviors. You will take a mentorship role within the DS team and work collaboratively with other business areas.What You’ll DoLead exploratory data analysis to cull actionable insightsCollaborate with stakeholders to understand business requirements and translate them into technical solutionsDevelop and implement statistical and machine learning models Fine-tune, optimize and ensure the scalability of models and algorithmsAid in designing experiments to answer targeted questionsIdentify and drive continuous improvement of key business metrics in an assigned business functional areaDrive adoption and usage of data science products and modelsTranslate data science outputs into business outcomes and value deliveredMentor and guide junior data scientists, providing technical expertise and fostering a culture of continuous learning and developmentStay up to date on the latest trends and developments in data science and technology and identify implementation opportunities to support innovation at Kohl’sAdditional tasks may be assignedWhat Skills You HaveRequiredBachelor’s Degree in Data Science, Computer Science, Statistics, Applied Mathematics or equivalent quantitative field3+ years of progressively complex Data Science in the Recommendation Systems field, solving problems at scaleExtensive experience developing and deploying state-of-the-art algorithms using machine learning, statistical and optimization methods Experience with machine learning frameworks such as TensorFlow, PyTorch, GBQ, Spark MLlib, Keras or scikit-learnExperience in one or more areas of advanced data science (Recommender Systems, NLP, Deep Learning, Computer Vision, Generative AI, etc.)PreferredMaster’s degree and/or Ph.DRetail experienceMarketing models

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Sr. NPD Project Engineer - Mechanical The Sr NPD Project Engineer will support product realization through cross-functional team collaboration. Responsible for managing portions of the new product design process As a Sr. NPD Project Engineer - Mechanical you will: Be responsible for leading portions of the design process, completing assigned tasks, assisting other members of the team, and helping to ensure project completion in accordance with the schedule.Develop schedules, coordinate and manage low complexity projects of with little to no supervision.Prepare budgets and defines resource needs for projects or parts of projects in area of responsibility.Assist with completion of the Product Realization Stage Gate Requirements.Be responsible for ensuring that project meets requirements of specifications and standards, while promoting error-proof assembly.Be responsible for creation of project test plan and completion of inside and outside test programs.Construct and test prototype components or assemblies as required in the development and approval process.Be responsible for reviewing test data and ensuring testing is in line with the test plan and pre-test calculations and meets or exceeds G&W requirements.Perform engineering analysis in design of new products and their subcomponentsPerform formal root cause analysis and troubleshooting on the new and existing products and processesPrepare written documentation of processes, material requirements, test results and project activity as required.Interface with purchasing and vendors in the selection and approval of component parts and assemblies.Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes.Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involvedGive direction to supporting personnel such as Engineers, Designers, and Technicians.Follow established procedures for creation and maintenance of CAD databases and libraries.Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings.Ensure that selected parts and processes meet project and company goals for cost efficiency and reliability.Perform other duties as assigned possibly We are looking for someone with: A Bachelor's Degree in Mechanical Engineering5+ years progressive experience in Engineering design and/or development to include Experience working on highly technical and innovative projects with demonstrated ability to be constantly challenged with new problems3D parametric modelingRunning finite element modeling and check design feasibility within mechanical, thermal and multi-physics environment. Strong technical knowledge required in mechanism design, linkages, springs, statics, dynamics and material propertiesFamiliarity with various manufacturing methods to include casting, machining, molding, stamping and formingFamiliarity with new product development Stage Gate Process.The ability to write technical documents, like test reports, engineering standards and technical papers.The ability to read and interpret technical standards.The ability to effectively communicate (verbal, written, presentations) across all levels of the organization.Proven experience with Microsoft Office SuiteExperience with DFMEA and DOE required.Experience with GD&T and tolerance stack up analysis.The ability to use small hand and power tools. Ideally you will have: ProE/Creo and Finite Element analysis A history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies.Experience in medium/high voltage electrical power systems a plusExperience with trip free, stored energy or actuated mechanism design a plus. The Physical Demands / Working Conditions of the role are: General Office Environment, PC useLight Lifting (occasional 25 lbs or less)StoopingStandingHeavy Lifting (frequent 25 lbs +) What we offer you: Typical pay is $94,200 - 122,500 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k)Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Exelon Corporation, Bank of America, United Airlines, or Northwestern University among many other leading organizations in the Chicago area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Banking - Customer Success - Data Analytics - IT Support - Project Management - Business Operations - Network Security & Support - Application Development Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.