We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Vice President, Enterprise Business Architect At BNY, our culture empowers you to grow and succeed. As a leading global financial services company at the center of the world’s financial system, we touch nearly 20% of the world’s investible assets. Every day around the globe, our 50,000+ employees bring the power of their perspective to the table to create solutions with our clients that benefit businesses, communities, and people everywhere. We continue to be a leader in the industry, awarded as a top home for innovators and for creating an inclusive workplace. Through our unique ideas and talents, together we help make money work for the world. This is what #LifeAtBNY is all about. We’re seeking a future team member in the role of Enterprise Business Architect to join our Enterprise Architecture team. This role is in Pittsburgh, PA - HYBRID. We are seeking a highly skilled Enterprise Business Architect with expertise in business architecture, strategic planning, and enterprise transformation. The ideal candidate will have a strong background in business process modeling, enterprise architecture frameworks, and stakeholder management. The primary focus of this role is to align business strategies with IT capabilities, ensuring that the organization’s goals are effectively supported by its technology landscape. In this role, you’ll make an impact in the following ways: Develop and maintain business architecture models that reflect the organization’s strategies and goals.Collaborate with business and IT stakeholders to ensure alignment between business objectives and technology solutions.Conduct assessments of current business processes and identify opportunities for improvement and innovation.Provide guidance and support for enterprise transformation initiatives, ensuring that changes are aligned with the overall business architecture.Utilize enterprise architecture frameworks such as TOGAF, Zachman, or similar to guide the development and implementation of business architecture.Communicate effectively with cross-functional teams, including business leaders, IT professionals, and other stakeholders, to ensure a shared understanding of business architecture principles and practices.Stay updated on emerging trends and best practices in enterprise business architecture, bringing new ideas and innovative approaches to the organization.Ability to perform data analytics. To be successful in this role, we’re seeking the following: Bachelor's degree in Business Administration, Information Systems, or a related field.7-10 years of experience in business architecture or a related field.Proven experience in developing and implementing business architecture models and frameworks.Strong analytical and problem-solving skills.Excellent communication and collaboration skills.Familiarity with enterprise architecture tools and methodologies.Knowledge of financial services industry is a plus.Knowledge of Microsoft PowerBI development is a plus.Knowledge of Python, Alteryx or similar data analytics development environments. At BNY, our culture speaks for itself. Here’s a few of our awards: America’s Most Innovative Companies, Fortune, 2024World’s Most Admired Companies, Fortune 2024Human Rights Campaign Foundation, Corporate Equality Index, 100% score, 2023-2024 Best Places to Work for Disability Inclusion, Disability: IN – 100% score, 2023-2024“Most Just Companies”, Just Capital and CNBC, 2024Dow Jones Sustainability Indices, Top performing company for Sustainability, 2024Bloomberg’s Gender Equality Index (GEI), 2023 Our Benefits and Rewards: BNY offers highly competitive compensation, benefits, and wellbeing programs rooted in a strong culture of excellence and our pay-for-performance philosophy. We provide access to flexible global resources and tools for your life’s journey. Focus on your health, foster your personal resilience, and reach your financial goals as a valued member of our team, along with generous paid leaves, including paid volunteer time, that can support you and your family through moments that matter.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We are seeking experienced welders to join our fabrication facility. This position requires working the afternoon shift with the flexibility to work overtime as needed.
We welcome all qualified candidates, including those with a criminal record, to apply.
Competitive Pay Based on Shift & Experience with Heavy Plate Fabricating Receive a $2.50 per hour bonus for working 50 hours per week. $3.00/hour shift differential for working the afternoon shift.
Afternoon Shift: 3:00 PM - 11:00 PM $21 - $25/hr
Day Shift: 7:00 AM - 3:00 PM $18 - $22/hr
Qualifications: Minimum of 3 years of experience in heavy fabrication. Successful completion of a hands-on weld test. Ability to read, interpret and understand blueprints. Proficiency in welding in all positions using 1/16” and 3/32” diameter wire, air arc and hand burning. Must provide your own hand tools and toolbox. Strong understanding of industry standards for welding and fabrication, including weld symbols. Mechanical aptitude with experience using a variety of hand tools and shop equipment.
Benefits: Health insurance Dental insurance Vision insurance 401(k) Life insurance Paid time off