Interior Installerin GAC WestfieldInterior Installation Technician IIUnique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222701Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/15/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Job Description:Position Details:$26.00 per hour up to $35.00 per hour depending upon experience$2500 Sign On Bonus (Terms Apply) and $1000 Annual Tool Allowance4 Day Work Week! (Wed 11:30am – 5:30am / Thurs – Sat 11:30pm – 5:30am)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent • 3 - 5 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Description Auto & Diesel Fleet Mechanic - Hiring Immediately! Servicing Yale University Campus Shuttle Benefits $27-$29/hour is set per the Union contractAn additional $.25/hour for each ASE certification you possess or obtainMonday-Friday- 1st, 2nd, 3rd shifts available We offer competitive compensation and benefits (based on role, location, and business)Physical and mental health initiativesMedical/dental/vision401(k)Paid holiday/vacationCompany-paid ASE testing and training materialsConsistent full-time, year-round workAnnual allowances for boots and prescription safety glassesOngoing company training on a state-of-the-art online systemOpportunities for career advancement nationwideA great work environment! Job Purpose: This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to Transdev standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. At this Transdev location, we service, repair, and operate some really exciting gasoline and diesel-powered vehicles and equipment, serving the Yale University campus shuttle.As a fleet technician, your major job duties will include: Responsibilities: Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components.Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs.Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliersAssist Tech III with preventative maintenance (PM’s), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usageRemove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision.Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision.Notify supervisor of potentially dangerous equipment and corrective action takenEvaluates completed work prior to release and seeks approval where requiredAssist with road calls and emergency services as necessaryAdhere to Transdev standards, policies and proceduresMoves vehicles safely between job and work areaRepair and maintain all shop equipmentCleans vehicles as requested or requiredOther responsibility as requested or required Physical Requirements & Working Conditions: Maintenance Shop environment with dust, dirt and grease conditionsAbility to work under all weather conditionsAbility to lift a minimum of 50 poundsAbility to work in a crouched position or on back, lying on mechanic’s creeper, beneath motor vehicle equipment Qualifications High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred)Class B CDL with passenger endorsement required (or expected within 3 months of hire)State inspection license (if required)ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Experience: Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experienceASE brake certified in heavy duty brakes or better, training availableAdhere to standards set by state DOT for motor vehicle inspections and safety standardsValid driver’s licenseIntermediate problem-solving abilityIntermediate computer skillsComfortable using hand toolsStrong customer service skills and communication skillsAbility to work independently as well as part of a teamMaintain an organized shop and clean work environmentRegular, predictable, full attendance is an essential function of the jobMaking sure vehicles are maintained and safe for our customersPossess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Apply today and get your career on the road with Transdev ! Disclaimer: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management’s assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. This position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to Transdev standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at www.TransdevNA.com or watch an overview video at https://youtu.be/ilO5cv0G4mQ Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status or any other classification protected by federal, state, or local law.

Requistion Number:24673When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

The purpose of this job is to repair musical string instruments in a timely and proficient manner so that the instrument is returned in good playing order. A technician can specialize in one type of instrument, or work on multiple types. Duty or Responsibility:Works on rental returned instruments in an efficient & timely manner.Ensuring each instrument is repaired according to established quality guidelinesMaintain accurate records for production reportingAdditional duties as assigned.About Music & ArtsThe first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 200+ retail stores, 120+ educational representatives, and 300+ affiliate locations.Minimum Requirements: High School Diploma or GED required.Apprenticeship or a diploma for an accredited repair school is requiredMust be able to read, write, speak, and comprehend English.Must be able to use standard repair shop tooling and equipment2 years of relevant work experience, working on musical instruments on a daily basisSkilled understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient mannerPerferred Requirements:4 years of relevant work experience, working on musical instruments on a daily basisAdvanced understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient mannerSpecial Attributes:Goal orientedThe ability to produce quality repairs in an efficient mannerThe ability to take advice and supervision from the shop managerProblem solving and technical skills as related to diagnosing and repairing each instrumentThe ability to self-motivate and work independentlyMust be able to work with others in a close environmentWhy Us Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Pay Rate:$16.00 - $18.00/hr plus commission depending on location, background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locationsMusic & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to.

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Mechanic candidates to join our 3rd Shift team in Meriden CT!At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Providing technical systems assistance for installation, maintenance, troubleshooting, repair, and modification of plant wide equipment including robotics, pneumatic and hydraulic.Troubleshooting and solving complex equipment problems.Developing and implementing maintenance procedures and techniques for a safe, reliable and efficient operation of the plant.Analyzing available data to improve the equipment maintenance plan.Training and development of the maintenance and production work force.Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Possess a High School Diploma / GED or higher (completed prior to start)Ability to work rotating weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:PIV certificationSelf-starter with the ability to work independently.Possess a good understanding for mechanical design & operation, including hydraulics, pneumatics, gear boxes, lubrication, etc.Basic understanding of predictive/preventative maintenance and condition monitoring techniquesWork location: Onsite - 400 Research Pkwy, Meriden, CT 06450Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $31.50, with the potential to reach $31.50 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Shape the Future of Medical Technology with KARL STORZ!Are you an experienced engineer passionate about designing life-changing medical devices KARL STORZ is seeking a Senior Mechanical Engineer – Product Enhancement & Development to lead the development of cutting-edge flexible endoscopes and associated technologies. This is your opportunity to work on impactful projects that enhance patient care worldwide.What you’ll be doing:Lead the design, prototyping, testing, and production of new medical devices, focusing on flexible endoscopes and accessories.Drive product development from concept to production, ensuring on-time delivery with global cross-functional teams.Identify opportunities for product improvements, cost reduction, and production yield enhancements.Develop and refine test protocols, conduct data analysis, and lead root cause investigations.Collaborate with international engineering teams to implement design changes and maintain compliance with global medical device standards (FDA, ISO 13485, ISO 9001).What’s in it for me Innovative Environment: Work on groundbreaking products that improve patient outcomes.Global Impact: Collaborate with a diverse, international team to bring medical technologies to market.Career Growth: Advance your career with a company that values professional development and technical leadership.Global Experience: Opportunities for up to 20% travel (domestic and international) allow you to gain valuable global perspectives and work with diverse teams.Contribution to Health: Play a key role in developing life-saving medical devices, making your work impactful and rewarding.What you will need to be considered:B.S degree in Mechanical Engineering (or equivalent mechanical design-based degree). 9+ years of experience in design/project engineering.5+ years of experience in a medical device development.Strong expertise in SolidWorks, statistical analysis, and MS Project/Server.Proven track record in leading teams and delivering innovative product solutions.Experience in manufacturing transitions, process development, and prototype fabrication.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.Ready to make a difference Apply now and be part of a dynamic team at the forefront of medical innovation.#LI-BL1

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P Global#AC250POSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

$24.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Windsor LocksConnecticutUnited States of America

Maintenance Mechanic 2nd shift 3pm-11pm M-F Starting pay $29.14/hr Hiring Immediately Make Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs a Mechanic, you’ll be part of our team located in New Britain, CT. You’ll get to: Inspect, maintain, and repair industrial equipment and machinery to ensure they are always in proper working order.Conduct routine maintenance and safety checks.Work proactively to mitigate issues before they become problems therefore limiting downtime.Study manufacturer manuals and blueprints and carefully follow directions when operating or setting up newly acquired machinery.Place orders to procure or replace materials and parts needed for maintenance or to replenish low inventories.Record all maintenance and repair services performed and include parts and materials used in the record.Perform all troubleshooting thoroughly seeking to identify the root cause of all failures and address all known issues within each repair.Safely use power and hand tools to drill, cut, grind, and assemble various equipment and fixtures.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have: Successful trade or vocational school completion or 2 years of relevant hands-on experience.Associate's degree in mechanical, electrical or engineering specialties (preferred).Working ability of hand power tools, IE: drill, saws.Demonstrable understanding of diagnostic process and troubleshooting.Valid driver's license.Ability to walk, stand 8-10 hours, and lift up to 32 lbs. independently and up to 70 lbs. with assistance for an extended period of time.What You’ll Receive You’ll receive a competitive wage and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Duties:Fabricate, machine, weld, and document various machine safety guards and componentsWork from complex blueprints, sketches, and verbal instructionsMaintain a leadership role within the Weld Shop. Operate as an individual departmentPerform tasks safely in a wide variety of welding operations, rigging awkward devices and machinery for repair or rebuildRepair/replace worn or damaged safety guardsOther duties as assignedWe Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Maintenance Technician 525 Mt Tom Rd, Northampton, MA 01060, USAReq #20537 Wednesday, November 6, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Maintenance TechnicianPackaging Corporation of America525 Mount Tom RdNorthampton, MA 01060Pay and BenefitsPay Range = $30.23 - $46.89 based on mechanical and electrical skills and experience.Excellent Benefits Package (Health, Dental, Optometry)401K Plan1.5 Pay over 8 hrs. and over 401.5 Pay Saturday and Sunday1.5 Pay Holidays + additional OT over 8 hours on holidaysUniforms providedPCA provides paid training to help technicians advance through the skill levels and achieve higher pay.Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipendsPCA provides Uniforms for Maintenance TechniciansA 2nd Class Fireman Boiler Operator License or a Grade 2 Waste Water License for the state of MA is a plus and will be additionally compensatedResponsibilitiesThis position is based at the PCA Box Plant located in Northampton, MA.This position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are multicraft and training is provided to develop these skills.Basic Qualifications2+ Years’ experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$30.23Max Hiring Rate$46.89

Hey detail-oriented person! We handle product movement at retail. We display it, we move it, we track it; making sure stores and their product suppliers have the best opportunities for optimal sales. When you join the SAS Retail Services’ team as a Reset Merchandiser you’ll be making a difference by ensuring the latest products match the new plan. If you like the flexibility of independent work and love looking at your “job well done” each day, this may be for you. We’ve got a lot to offer with specialized training and growth opportunities galore.What you get:Competitive wage; $16.00 per hourGet paid quicker with early access to earned wagesGrowth opportunities abound – We promote from within. Simple. Excel and advance.We offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discounts.Now, about you:You’re 18 years or olderWith reliable transportation and valid driver’s licenseYou like physical work of moving, bending, standing and can lift up to 25lbsClick here to learn more from our team.Join us and see what’s possible for you! Click here to get started.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

Company DescriptionAbout Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our websitewww.veolianorthamerica.com.Job DescriptionBENEFITSVeolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose: Performs a variety of maintenance functions at water production and related facilities Engages in electrical installation projects and maintenance of existing electrical, electronic, instrumentation and controls, and service equipment. Performs complex circuit diagnosis and troubleshooting. Works with other departments of the Company as assigned.Primary Duties/Responsibilities:Interprets plans and specifications for projects.Performs installation of 480 volt and lower voltage circuits for power and lighting.Works independently or with contractors to maintain high voltage circuits.Installs electrical and electronic equipment according to the plans and specifications.Prepares and updates drawings.Lays out work to be performed after diagnosing and troubleshooting problems.Determines and performs necessary repairs to electric power and lighting circuits and electrical and electronic equipment.Performs tests for temperature vibration, noise, current, voltage, insulation level, and calibration as required.Adjusts, lubricates, and repairs small motors, motor controllers, telemetry equipment, PLC equipment, metering equipment, water treatment equipment, transmission and distribution equipment including pumps, standby engines, heating and ventilation equipment, bleeder valves, motor wells, battery sets and chargers, and generators.Handles materials and equipment such as electric, electronic, and environmental test equipment, portable hand and electric tools, and pumping units, etc.Ensures the documentation of equipment maintenance history through the use of the MMS System.Works independent of or with operation’s division personnel, contractors or engineering as required.Submits requisitions for tools and materials; ensures inventory used is documented in the MMS System.Documents vehicle and equipment use.Develops or modifies Standard Maintenance Procedures (SMP's).Assists in training personnel as assigned.Troubleshoots and repairs Scada system problems at assigned facilities.Performs routine checks on Scada system alarms to ensure function.Work Environment:Occasionally exposed to wet or humid conditions (non-weather), fumes or airborne particles, and toxic or caustic chemicals.Works near moving mechanical parts.Work in high and precarious places.Exposed to extreme outdoor weather conditions such as ice and snow.Risk of electrical shock and vibration.Excessive plant noise.QualificationsEducation/Experience/Background: A high school diploma or general education degree (GED) is required.Completion of one year (24 credit hours) of a technical degree from an accredited program at a recognized school of engineering and technology or technical institute or equivalent in electronics or electricity.Knowledge/Skills/Abilities: Ability to undertake additional education to update skills as needed.Knowledge of the National Electric Code.Knowledge of medium and low voltage power and lighting circuits.Knowledge of programmable logic controllers.Knowledge of Company safety and environmental procedures.Ability to operate a personal computer and appropriate software.Ability to participate in the Company's Respiratory Protection Program.Knowledge of applicable OSHA standards.Ability to maintain responsible use and care of hand tools furnished by the Company.Ability to read and interpret blueprints and wiring schematics.Ability to drive a vehicle.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Knowledge and understanding of Scada system operations.Ability to diagnose control failures related to power or communications.Leadership ability and dependability in performance of duties when working alone.Ability to read and interpret operations and maintenance instructions and procedure manuals.Ability to work with RCM maintenance program.Required Certification/Licenses/Training: Must have a valid driver's license.Must have a Massachusetts'sJourneyman or Master Electrician license (MA).Physical Requirements:Should be available outside of normal working hours for emergency response. Frequently sits, talks or hears.Occasionally stands, walks, uses hands to finger, handle, or feel; reach with hands and arms and climbs or balances, stoops, kneels, crouches, or crawls and tastes or smells.Reading drawings, driving company vehicle, troubleshooting equipment, distinguishing difference of wire colors, using computer, taking notes, and planning work assignments requires close vision, distance, color, peripheral vision, depth perception and the ability to adjust focus.Lifts up to fifty pounds routinely and 100 pounds occasionally with assistance.Additional InformationWe are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Expand your career possibilities.Thank you for dedicating your time and talent to Lowe’s. We want to give you more opportunities to learn and grow, so if you find a position you’re interested in below, we encourage you to apply!Find Your Home to More Possibilities.ScheduleMonday- Friday 7am-4:30pmWhat You Will DoThe focus of the maintenance team is to keep equipment in the FFC fully operational. The Maintenance Mechanic I is a knowledgeable repair person with exposure to and experience with FFC systems andbuilding components. The Maintenance Mechanic I has specialist knowledge and complex repair capability in one of the following areas: conveyors, rolling stock, or building. In addition, the individual in this role has general knowledge and basic repair capability in the other two areas outside his/her specialty. In all instances, the Maintenance Mechanic I has sufficient electrical and mechanical knowledge to safely and independently repair equipment in the FFC. The Maintenance Mechanic I is able to integrate his/her trade skills, classroom knowledge, and systems experience to recognize and diagnose equipment issues, determine the type of repair needed, prioritize and plan the work, obtain or order the appropriate spare parts, and execute the repair. This individual is capable of mentoring a Maintenance Utility, but also seeks assistance from a Maintenance Mechanic II or the Maintenance Supervisor, when needed.What We're Looking For• Required to work a set schedule that may be changed/modified by management based on the needs of the facility.• Requires availability to work morning, afternoon, nights, or weekends depending upon assigned shift and overtime based on the needs of the facility.• Requires on-call support.• Must work in a distribution/warehouse environment with the physical and environmental aspects typically associated with such environment.• Must be able to use tools and complete maintenance related tasks that require fine motor skills and hand-eye coordination.• Must be able to work safely with corrosive materials and at heights of 20+ feet.• Minimally must be able to lift 25 pounds; ability to lift up to 70 pounds.What You Need To SucceedMinimum Qualifications• Possess a valid state driver’s license• 2 years of experience in her/his specialty area• Combination of experience and/or technical training in electrical/electronic theory ranging up to 600 volts systems (or willingness to obtain appropriate training within 1 year of employment)• If required by local regulations, certified to perform work at the Maintenance Mechanic level (such as electrical work in the state of Oregon)• Proven record of complying with safety requirements• Able to see objects and discriminate colorPreferred Qualifications• High school diploma or technical school graduate• Experience and/or certification with welding and fabrication• Certification for electrical work and/or high voltage work• Experience operating various maintenance and operations vehicles and equipment• Experience reading blueprints, schematics, and other technical drawingsLowe’s is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Job Description:Position Details:$30.00 per hour and up depending upon experienceSunday - Wednesday 2nd shift hours$5000 Sign On Bonus (Terms Apply), as well as Quarterly Safety IncentivesWe Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent• 5 - 7 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair• Minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissions.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Aircraft Painterin GAC WestfieldUnique Skills:Prior aircraft or automative painting experience is preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years in related paint processes. Aircraft industry experience preferred.. Valid Drivers License required.. Position Purpose:The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223394Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/08/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking 2nd Shift Plant Electrician/Mechanic candidates to join our team in Meriden CT!At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Plant Electrician/Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Troubleshoot, repair, maintain, and improve electrical/control systems:Drive control components, I/O, PLC devices & logicField control devicesNetwork systems and communicationPerform independent preventive, predictive, and corrective maintenance on web handling production equipment, ultrasonic welders, pleaters, pumps, heat exchangers, building HVAC, and facility utilities.Document work in maintenance tracking systems and develop/refine standard work for maintenance activities.Perform basic welding, machining, and fabrication tasks using shop equipment, power tools, and precision measurement instruments.Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Possess a High School Diploma / GED or higher (completed prior to start) Minimum of three (3) years of mechanical, electrical, or mechatronic work in a private, public, government, or military environmentAbility to work rotating weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:Possess or be in the last 6 months of pursuing a two-year technical degree or certificate program in an engineering or maintenance-related field (Mechanical, Mechatronics, Industrial Electronics, Robotics & Automation, etc.)Possess good documentation skills and can read and understand electrical/mechanical prints.Basic understanding of predictive/preventative maintenance and condition monitoring techniquesWork location: Onsite - 400 Research Pkwy, Meriden, CT 06450Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $38.11, with the potential to reach $38.11 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

$24.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Windsor LocksConnecticutUnited States of America

General Responsibilities:Perform a full range of duties including but not limited to troubleshooting, repairing, and maintaining electrical, electronic, mechanical, and vacuum systems for machinery.Duties:Perform highly diversified mechanical skills to install and maintain production machines and the plant facility’s equipment including mechanical, pneumatic, and hydraulic troubleshooting and repair of production machines. Use a variety of hand and power tools, electric meters, and material handling equipment.Provide emergency/unscheduled repairs of equipment during production and perform scheduled maintenance repairs of production equipment during machine service.Diagnose problems to a component level, replace or repair parts, test and make adjustments.Perform regular preventive maintenance on machines, equipment, and plant facilities. Interpret diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshoot malfunctions.Use advanced trades mathematics along with complicated drawings, specifications, charts, tables, handbook formulas, all varieties of precision measuring instruments, CNC equipment, and personal computers.Proficiently use DMMs, Meggers, Oscilloscopes, data logging instrumentation, and other typical measuring devices.Demonstrate working knowledge of and experience with sensors including temperature, flow, pressure, voltage, current, and others related to industrial manufacturing machineryUse specific software application programs of a technical nature such as PLC programming software, and VFD set up, troubleshooting, and commissioning.Repair instrumentation and controllers.Climate: Demanding, fast-paced position resulting from deadline pressures, simultaneous competing demands, and changing priorities.Requirements:High school diploma or equivalent required; completion of an accredited apprenticeship or education equivalent to a 2-year technical degree the field of both analog and digital electronicsA minimum of 1 to 3 years of relevant experienceExperience using machine shop equipment such as Bridgeports, lathes, surface grinders etc.Trained in electrical safe work practices with emphasis on NFPA 70EWilling to advance with further educationSchedule:Monday-Friday, 5:00 PM-5:00 AMWe Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Aviation Safety Inspectorin GAC WestfieldAirworthiness Inspector A&P.$3,000 Signing Bonus.Unique Skills:2nd shift position (Tuesday - Friday)Gulfstream large cabin experience preferred.Flight Safety Initial course completion preferred.Must be able to occasionally work in confined spaces.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223331Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Mechanic candidates to join our 2nd Shift team in Meriden CT!At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Providing technical systems assistance for installation, maintenance, troubleshooting, repair, and modification of plant wide equipment including robotics, pneumatic and hydraulic.Troubleshooting and solving complex equipment problems. Developing and implementing maintenance procedures and techniques for a safe, reliable and efficient operation of the plant.Analyzing available data to improve the equipment maintenance plan.Training and development of the maintenance and production work force.Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Possess a High School Diploma / GED or higher (completed prior to start) Ability to work rotating weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:PIV certificationSelf-starter with the ability to work independently.Possess a good understanding for mechanical design & operation, including hydraulics, pneumatics, gear boxes, lubrication, etc.Basic understanding of predictive/preventative maintenance and condition monitoring techniquesWork location: Onsite - 400 Research Pkwy, Meriden, CT 06450Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $31.50, with the potential to reach $31.50 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

$18.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are as passionate about cars as we are. Whether you have recently graduated from a tech school or worked in a manufacturing warehouse, auto garage or auto dealership, this job might be a great fit for you! Become a member of our Avis Budget Group enterprise.What You’ll Do:You will perform preventative maintenance functions and light repairs on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs, rotations, and other basic light repairs, all in a safe manner. Depending on your experience, you may be assigned to assist our experienced auto mechanics.Perks You’ll Get:Bi-weekly pay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities, help to obtain ASE CertificatesPaid time offMedical, dental, and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License At least 6 months auto maintenance experience (ability to acquire 1 ASE certificate within first year)Comfortable working in a mechanical shop with moderate or loud noise levelsBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotely6 months auto maintenance or auto tech school degree a bonus!Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.Windsor LocksConnecticutUnited States of America

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Structural Mechanicin GAC WestfieldSheet Metal Mechanic II / Sheet Metal Technician II$4,500 Signing Bonus.Unique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. Able to work with minimal supervision on duties and tasks . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment .Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223065Category: OperationsPercentage of Travel: Up to 50%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Technician candidates to join our 2nd Shift team in Stafford Springs CT!Shift: 2nd Shift (Tuesday - Saturday; 3pm - 11pm)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Providing support for basic maintenance tasks, preventative maintenance, facilities maintenance, audits, demolition, service to production tasks, and assisting skilled maintenance craftsAssisting in the documentation and implementation of maintenance proceduresEntering Work Orders and inventory via SAMS, SAP or other MRP systemSupporting daily wastewater treatment plant operationsAssisting Plant Engineering or performing other assignments as directed by supervision and leadershipYour Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year of manufacturing, construction or military work experienceAbility to work 2nd Shift (Tuesday - Saturday; 3pm - 11pm)Ability to wear a respiratorAdditional qualifications that could help you succeed even further in this role include:Experience in a manufacturing plant environmentPossess or currently pursuing certifications or an AS degree targeting a Plant Maintenance careerPIV certification (will train as needed; must certify within 60 days)High Lift experience (will train as needed; must certify within 90 days)Possess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesWork location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Senior Aircraft Mechanicin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Eligible for Relocation Assistance. Hiring for All Shifts.Unique Skills:See job description for details.Prior corporate aircraft experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222282Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Mechanic candidates to join our team in Stafford Springs CT!Shift: 3rd Shift (Monday - Friday; 11pm – 7am) At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Maintaining all plant systems, which includes processing, packing, warehouse and facility operations.Installing, troubleshooting, and repairing mechanical, pneumatic, and hydraulic systems.Troubleshooting and repairing gear boxes, transmissions, pulley systems, etc.Disassembling and reassembling of machinery and various other mechanical drives.Entering Work Orders and inventory via SAMS, SAP or other MRP system.Assisting with Preventative Maintenance, continuous improvement, Kiazen events, and Lean eventsOperating safely by observing all plant safety rules and regulationsOperating and maintaining all material handling equipment (including PIVs)Performing other assignments as directed by supervision and leadershipPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year experience as a Maintenance Mechanic in a manufacturing environmentAbility to work 3rd Shift (Monday - Friday; 11pm – 7am)Additional qualifications that could help you succeed even further in this role include:Professional certifications, military background or an Associate degreeThree (3) to five (5) years’ experience as a Maintenance Mechanic in a manufacturing environmentPossess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesPIV certification (will train as needed)High Lift experience (will train as needed)Work location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

Avionics Technician IIin GAC WestfieldHiring for All Shifts. $6,500 Signing Bonus.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for detailsEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222280Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Project/Job Responsibilities:· Serves as Lead Technical resource on assigned projects.· Reports on job status and performance.· Controls job costs.· Develops and maintains productive relationships with peers, customers, GCs and subcontractors.· Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees.· Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc.· May oversee 3rd party resources.People Responsibilities:· Directs and oversees the work of other Apprentices and Journeyman assigned to specific projects. Qualifications: Business/Project Management:· High school diploma, GED, or completion of trade program or technical school. College degree is a plus.· 5+ years of experience in commercial building construction or other related industry/trade,· Knowledge of construction principles and practices, including efficient use of labor hours.· Ability to organize tasks.· Ability to use good judgment in making work assignments.· Ability to give clear instructions and guidance, as needed.· Ability to maintain project labor hours within acceptable limits and request change orders as needed.· Ability to ensure safe work practices and ensure compliance with Safety policies.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Ability to work with minimal supervision.· Track record of punctuality and dependability.· Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc.People Responsibilities:· Ability to manage time, delegate assignments and follow through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

Senior Avionics Technicianin GAC Westfield$6,500 Signing Bonus. Eligible for Relocation Assistance.Hiring for All Shifts.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222283Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1