Waterloo, IA 50703 • (41.8 miles) • Full Time • 10/18/2026

Reporting to the Operations Manager, you will lead plant production operations by directing production leadership teams and coordinating manufacturing activities to achieve safety, quality, service, and performance objectives. You will ensure the effective alignment of people, materials, and equipment to support efficient production flow while fostering a culture of continuous improvement, operational excellence, and regulatory compliance within a manufacturing environment. Schedule: 7:00pm-7:00am 2/2/3 schedule pattern A Taste of Your Responsibilities Ensure food safety, product quality, and regulatory compliance standards are consistently achieved. Lead production supervisors and frontline leaders to deliver operational performance targets and drive accountability. Allocate labor, materi

Anamosa, IA • (41.6 miles) • Full Time • 10/13/2026

Job Title: Assembler Job Description This role involves assembling aluminum composite panels used on the exterior of commercial buildings. You will start by working closely with an assembly lead who will lay out your daily work until you can independently set up and complete jobs. You will use basic hand and power tools, follow measurements, and assist in routing large panel sheets to precise specifications. This is a hands-on, physical position in a clean, climate-controlled production environment. Responsibilities Work with an assembly lead to learn daily tasks, job layout, and production processes until able to perform independently. Assemble aluminum composite panels using basic hand tools such as pop rivet tools and hand drills. Use a tape measure and, as needed, micrometers to verify

Waterloo, IA 50704 • (38.9 miles) • Full Time • $30.00 to $35.00 / hr • 10/23/2026

Job Title : Materials Engineer I - Materials Engineering/ Materials Engineering Technician Contract length : Long Term (24+ months) Position Type : W2 Contract Description : Maintenance Technician background would also be a good fit. MAJOR PURPOSE : This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in scope and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. MAJOR DUTIES : Description of the major duties performed in this job. • Completes tasks involving preparation or analysis of material samples/components/processes with minor

Waterloo, IA • (43.6 miles) • Full Time • $35.00 to $38.00 / hr • 10/20/2026

Job Title: Tactical Supplier Quality Engineer Location: Waterloo Works – Tractor Operations Shift: 1st shift (7 am to 3:30 pm) – Overtime may be scheduled at end of shift As a Tactical Supplier Quality Engineer for John Deere Tractor Cab Operations located in Waterloo, Iowa, you will.... • Work with suppliers to contain quality issues in support of 24-hour containment of supplier quality issues with the business unit. • Coordinate significant containment activities for both quality and design related issues with the business unit to ensure containment is complete. • Initiate corrective action and closure for recurrences significantly affecting FPY, resulting in line down time or significant repair. • Responsible for managing proper disposition and action of data related to supplier quality

Monticello, IA 52310 • (36.2 miles) • Full Time • $24.00 to $30.00 / hr • 10/17/2026

We are currently seeking an experienced and passionate CNC machinist to work in our team oriented environment. The ideal candidate would have manufacturing experience in a machine shop setting with a working knowledge of G&M code programs and a background in lathe machine work. We primarily operate Fanuc control equipped Mori Seiki CNC lathes. Responsibilities Identifying raw material blanks Operating a forklift to safely transfer raw and finished materials Loading and unloading programs to and from CNC consoles Inspecting and understanding customer supplied blueprints Operating and reading precision measuring equipment to maintain blueprint sourced dimensional tolerances Inspecting, installing and adjusting fixtures or lathe jaws Installing tooling into machine centers and setting geometr

Waterloo, IA • (43.6 miles) • Full Time • 10/16/2026

Job Title: Manufacturing Engineer II Client: Heavy Machine Manufacturing Company Duration: 24 months (possibility extension) Location: Waterloo, IA 50704 Shift: 1st Shift: 7:00 AM – 3:30 PM Description: The Manufacturing Engineer II – Assembly will plan, coordinate, and perform manufacturing engineering activities supporting assembly operations at John Deere's Waterloo Works – Tractor Operations facility. This role focuses on improving manufacturing processes, developing engineering solutions, supporting product development, and ensuring production processes meet established cost, quality, safety, and regulatory requirements. The engineer will work collaboratively with manufacturing, engineering, quality, maintenance, suppliers, and other cross-functional teams to troubleshoot issues, impl

Marion, IA 52302 • (42.5 miles) • Part Time • $40.00 to $58.00 / hr • 10/15/2026

Job Title: Mechanical Designer Job Description The Mechanical Designer develops innovative mechanical concepts for new products with a strong focus on packaging and enclosures. This role combines hands-on 3D modeling, detailed documentation, and cross-functional collaboration to convert customer requirements into practical, manufacturable solutions. The position offers a flexible schedule, opportunities to work on cutting-edge prototype designs, and involvement from concept through production. Responsibilities Design conceptual mechanical solutions for new products, with emphasis on packaging and enclosures for electronic systems. Develop detailed 3D models and 2D drawings using SolidWorks or similar CAD tools to support product development. Collaborate closely with electrical, software, a

Waterloo, IA • (43.6 miles) • Full Time • $65,000 to $75,000 / yr • 10/1/2026

Looking for a change? You want to work with a company with great benefits and a flexible schedule? Be a part of a solution to help companies be more successful and keep more jobs in the US? We are looking for strong candidates that are problem solvers and have a great attitude. Work with large manufacturers to make a difference in the output and performance of their company. You can help them identify and help fix the issues they are having. Work with the tooling companies to help find solutions and then run the tests to prove them out. Get to be in the know of the new tools coming out and also be able to try them. This is a rewarding position that will have you wanting to go to work every day. The ideal candidate loves talking to people and proactively solving issues. You will be responsi

Manchester, IA 52057 • (13.7 miles) • Full Time • 10/9/2026

XL Specialized Trailers is a top tier manufacturer of custom Heavy Haul Trailers engineered and designed to meet the hauling needs of its customers. Founded on innovation and commitment to quality, the XL brand has earned a reputation as a premium heavy haul trailer. Position Description: Job Overview: Generally expected to work as a valued member of the XL Specialized Trailers team. Prepares and processes parts prior to assembly. Essential Duties and Responsibilities: Determines sequence of operations by studying blueprints, specifications and work orders Prepares machine for production by positioning and securing dies, stops, guides and turntables. Regulates machining by setting and adjusting controls. Produces parts by locating and marking reference points on workpiece with rule, compas

Patch Grove, WI 53817 • (33.7 miles) • Full Time • 10/15/2026

BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Industrial Painter will be responsible for all aspects of painting Industrial Equipment. This includes preparing surfaces, mixing paint, utilizing spraying equipment, operating paint booths, rolling and touching up, applying decals, etc. Key Deliverables · Operate paint sprayer or other equipment industrial paint on metals or products. · Monitor work to ensure desired results. · Ensure that all materials are labeled accurately. · Clean, sa

Oelwein, IA 50662 • (20.3 miles) • Full Time • $28.00 to $40.00 / hr • 9/26/2026

Purpose Support focus on commercial sprayer application customers. Independently perform in-field equipment diagnostics and repairs by operating a mobile service vehicle and traveling to customer locations. Candidates require a strong work ethic to complete a task efficiently with minimal supervision. Individual will serve as an in-field representative for the dealership to provide service solutions. Responsibilities include managing a mobile service schedule to meet customer expectations, while meeting field revenue expectations. Must maintain a mobile parts stock, including tracking and billing coordination. Communication skills required to clearly articulate aspects of work being performed to a customer in a courteous and effective manner. Responsibilities: Perform diagnostics and repai

Dubuque, IA 52001 • (43.8 miles) • Full Time • 10/15/2026

At Cross Company, we don’t just show up for workwe show up for a company we actually own. As a 100% employee-owned industrial technology leader, we provide specialized expertise in automation, hydraulics, precision measurement, and more that keeps the world’s manufacturers moving. We operate on the principle of Servant Leadership: we hire smart, driven people and then get out of their way so they can do what they do best. When you join the Cross team, you aren't just an employee; you’re an owner-associate in a stable, transparent, and high-performance environment where your voice truly matters. Job Summary: The goal of the Power Tool Repair Technician is to provide the repair of all fastening tooling in the Plant; assembly process to include but not limited to DC Electric, pulse, air and b

Marion, IA 52302 • (42.5 miles) • Full Time • $28.03 / hr • 10/10/2026

EQUIPMENT OPERATOR - PARKS Open until filled. First review of Candidates is October 19, 2026. Job Title: Equipment Operator Civil Service: No Department: Parks and Recreation Bargaining Unit: AFSCME Reports to Position: Parks Maintenance Manager Location: Thomas Park Overtime Status: Hourly FLSA Status: Non-Exempt JOB SUMMARY Under limited supervision, performs a variety of skilled and advanced skilled duties including the safe and efficient operation of assigned equipment in the construction and maintenance of park grounds and facilities. Direction and review is received by Parks Maintenance Manager. May lead, direct, and review work of assigned seasonal and full-time staff during supervisors’ absence. Overtime hours may be required by weather or workload. ESSENTIAL JOB DUTIES/WORK PERFOR

Farley, IA 52046 • (31.4 miles) • Full Time • $25.00 to $30.00 / hr • 10/6/2026

Maintenance Technician Dubuque County | On-Site Full-Time | Monday-Friday | 1st Shift A locally owned manufacturing company in Eastern Iowa is seeking a Maintenance Technician to support first-shift operations. This role is responsible for keeping production equipment running safely and efficiently through troubleshooting, repair, and preventative maintenance. They are open to developing someone with a strong mechanical aptitude just out of school or interested an opportunity at a lower starting pay, with less industrial experience that they can develop into the position. What You'll Do Troubleshoot and repair electrical, hydraulic, pneumatic, and mechanical systems Perform preventative maintenance on production equipment and facility systems Read and interpret schematics, diagrams, and te

Independence, IA 50644 • (23.2 miles) • Full Time • 10/17/2026

Position Summary: The basic function of the Drill Press Department Supervisor is to supervise and coordinate the activities of workers engaged in operating a variety of industrial machines so that GMM may produce under the optimum conditions of productivity, efficiency, cost effectiveness and ease of operations. Essential Duties and Responsibilities include the following: Other duties may be assigned. Understand and promote "lean principles" throughout the company. Work with the team leaders/working supervisors to coordinate dispatch lists and routing of work assignments within the department. Schedule employee hours in relation to the amount of work in the facility. Optimize the resources (machines & employees) within his/her department. Meet the goals set by management on quality, effici

Waterloo, IA 50703 • (39.1 miles) • Part Time • $15.00 / hr • 10/16/2026

Everyone knows what ion nitriding, gas nitriding, carbonitriding, and induction hardening are... right? Nope... nope they sure don't! THAT'S OK! Join our team... we would love to teach you!!! AHT has been in the Industry for 40+ years! Our team has touched products that make the world stronger and safer. Our processes improve upon parts manufactured by other industries, including aerospace, defense, firearms, automotive, construction, agriculture, energy and medical... just to name a few. Are you familiar with the jaws of life, how about airplane landing gear, or perhaps the Mars Rover? Our employees processed parts that went to MARS! As part of our team, you will learn about metals, effects of our process on metal, and why quality is so important. You will become an expert in an industry

Peosta, IA 52068 • (40.9 miles) • Full Time • 10/16/2026

Accelerate the possible by joining a winning Amcor team that’s transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It’s our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win – adapting quickly in an everchanging w

Manchester, IA 52057 • (13.7 miles) • Full Time • 10/15/2026

Production Supervisor, Manufacturing (Day, Evening and Overnight Shifts Available Currently) (Excellent Full Benefits Package, Competitive Compensation/Bonus Package and more!) The Production Supervisor, Manufacturing will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. Position Responsibilities: · Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries. · Accomplish ma

Dubuque, IA • (43.9 miles) • Full Time • $70,000 to $75,000 / yr • 10/11/2026

Job Title - Production & Packaging Supervisor Location - Dubuque, IA Shift -2nd Shift (2:45 PM– 10:45 PM) Compensation - $75K Annually + 4.5% bonus Essential Duties & Responsibilities : Monitors inventory levels at the outside warehouses to ensure adequate inventory levels are maintained. Ensures blends are prepared on timely basis to meet customer needs Assists in establishing operational procedures for warehouse and inventory activities such as verification of incoming and outgoing product, handling and disposition of materials, and keeping warehouse inventory current. Assists in the responsibility for the physical condition and sanitation of a food warehouse and warehouse equipment. Ability to use JDE system effectively to control, adjust, consume, and move inventory. Consistent with co

Manchester, IA • (14.1 miles) • Full Time • $70,000 to $88,000 / yr • 10/8/2026

Production Supervisor - 1st, 2nd & 3rd shifts Company: Confidential - manufacturer Location: Manchester, IA Compensation: $70,000 - $88,000 Employment Type: Full-time; openings on all three shifts About the Company Our client is a manufacturer in Manchester, Iowa with multiple Production Supervisor openings across 1st, 2nd and 3rd shifts. Local or Iowa-based candidates only; relocation is not offered. The Role The Production Supervisor is part of the manufacturing team, supporting the Director of Operations and the Production Manager. You will supervise staff, organize and monitor workflow, and act as quality inspector, safety coordinator, material handler and trainer for your area. About half of your time is spent in direct labor in the area you run. What You Will Do Complete the producti

Dubuque, IA 52002 • (40.3 miles) • Full Time • 10/8/2026

Shift Information: (C Shift) Wednesday 12a-6am, Thursday -Saturday 6p-6a PURPOSE OF THE POSITION Leads an assigned production team to achieve goals and problem solve while demonstrating a commitment to employees safety, teamwork, and product quality. Responsible for product processing, packaging, and storage in compliance with FDA, USDA, and Simmons rules and regulations. ESSENTIAL POSITION RESPONSIBILITIES Leads a team of front-line employees. Effectively communicates with and motivates employees in order to drive productivity and achieve company goals. Supervises employees to maintain discipline, teamwork, and safety so that daily production requirements are met. Responsible for scheduling, tracking attendance, and reviewing and approving time off for their direct reports. Responsible fo

Waterloo, IA • (43.6 miles) • Full Time • $75,000 to $88,000 / yr • 10/8/2026

The Production Supervisor will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. DUTIES / RESPONISIBILITIES Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries. Accomplish manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enfor

Peosta, IA 52068 • (40.9 miles) • Full Time • 10/22/2026

Hours: 5:00am – 3:30pm, Monday through Thursday (overtime hours as needed) Job Summary: The Fabrication Utility is responsible for working across multiple areas in our Fabrication Department. The ideal candidate will have a versatile skill set, a strong work ethic, and the ability to adapt to various roles as needed. The role involves supporting various teams in ensuring smooth operations and assisting with tasks as required across different areas of Fabrication such as Laser area, Deburring area, and Machining Center. Responsibilities: Assist in a variety of tasks across different areas Interpret assembly instructions to assemble products Safely operate hand and power tools Inspect finished product for quality in adherence to specifications Provide backup support for team members when nec

Dubuque, IA 52002 • (40.3 miles) • Part Time • $17.00 to $18.00 / hr • 10/23/2026

Join TRIGO Global Quality Solutions as a Traveling Quality Inspector and work at a variety of manufacturing facilities throughout Eastern Iowa and the surrounding region! This part-time, as-needed role offers flexible scheduling, regional travel opportunities, and hands-on experience helping customers maintain high quality standards. Whether you're looking to supplement your income, gain manufacturing experience, or enjoy a position that offers variety and independence, this role provides an excellent opportunity to build valuable skills and make an immediate impact. Typical hours occur between 5:30 AM and 2:00 PM on an as-needed basis. The estimated pay range for this position is $17.00 to $18.00 per hour. Overall Purpose The Traveling Quality Inspector is a vital part of the first line o

Monticello, IA 52310 • (36.2 miles) • Full Time • 10/23/2026

Company Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We

Dubuque, IA 52001 • (43.8 miles) • Full Time • 10/22/2026

Your future starts here. Job opening. Land Surveying Intern DUBUQUE, IOWA The Land Surveying Intern position is designed to provide hands-on technical surveying experience through meaningful project work that supports the intern’s professional growth and career development. The internship offers exposure to variety of projects, including boundary surveys, ALTA surveys, land subdivisions, legal descriptions, and construction layout projects. Interns will work alongside experienced professionals to gain practical knowledge in project administration, survey documentation, and design support. Future internships and opportunities upon graduation may also be available. Position Responsibilities. Assist in performing boundary and topographical surveys and related engineering and land surveying wo

New Vienna, IA 52065 • (23 miles) • Full Time • $25.00 to $35.00 / hr • 10/22/2026

A well-established and growing manufacturing company is seeking an experienced CNC Operator to join their team. This organization is recognized as a leader in producing high-performance components for a variety of small engine and recreational equipment applications. Their focus is on delivering reliable replacement parts within specialized markets, and they continue to expand their operations. Position Overview: This role will primarily focus on operating CNC Horizontal and Vertical Mills, with opportunities to learn and support additional CNC equipment as needed. Under minimal supervision, this individual will also program and operate machinery to fabricate molds and tooling. Key Responsibilities: Set up and operate CNC machinery, including horizontal and vertical mills Program and opera

Dubuque, IA 52002 • (40.3 miles) • Full Time • $24.34 / hr • 10/22/2026

A.Y. McDonald Mfg. Co. is a leading manufacturer of water works brass, plumbing valves, water systems, natural gas valves and meter bars. The company was founded in 1856 and is committed to taking care of the customer – our boss, through our growing investments of education, automation, and innovation. A career at A.Y. McDonald Mfg. Co. comes with a family friendly culture, on-the-job training, advancement opportunities, and the chance to make a difference every single day. This position will be responsible for setting up and operating both CNC and manual machine tools. Qualified applicants must have the ability to load and unload production equipment in a fast-paced work environment, read and understand blueprint drawings of parts and have the skills to utilize calipers, gauges and other

Independence, IA 50644 • (23.2 miles) • Full Time • 10/20/2026

P Extrusion Team Lead Pries is looking to add an Extrusion Team Lead to our Production Team! If you're a motivated leader who enjoys coaching employees, driving production results, and creating a safe, productive work environment, we'd like to hear from you. Schedule & Pay 1st Shift: Swing 2-2-3, 6:00 AM - 6:00 PM Training schedule may vary based on production needs Starting pay: $23.00+ per hour, More based on experience $2.00/hour attendance bonus eligibility each pay period Position Summary The Extrusion Team Lead is responsible for overseeing daily extrusion production activities, leading a team of operators, and ensuring production, quality, and safety goals are achieved. This role coordinates manpower, materials, and equipment to meet customer demands while maintaining a positive and

Dubuque, IA 52001 • (43.8 miles) • Full Time • 10/20/2026

Company Description Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Maintain the facility through preventative and corrective maintenance on electrical, mechanical, plumbing, and other related systems. Job Functions Troubleshoot problems with systems and take appropriate corrective action. Respond to emergency situ

Dyersville, IA 52040 • (23.3 miles) • Full Time • $21.00 to $23.00 / hr • 10/19/2026

Machine Operators – 2nd Shift Location: Dyersville, Iowa Position: Full-Time | Manufacturing | Direct Hire | JEDA Polymers is seeking team-oriented individuals who are eager to learn and grow within a hands-on, fast-paced production environment. JEDA Polymers , a growing manufacturer of engineered plastic resin, is hiring Machine Operators to join its 2nd shift production team in Dyersville, Iowa . As the only plastic resin compounder in Iowa specializing in engineered thermoplastics, JEDA continues to thrive by focusing on innovation, customer partnerships, and Midwest valueshonesty, hard work, and teamwork. About the Role Machine Operators play an essential role in the continuous production of high-quality resin. Through JEDA’s structured training program, new team members will gain the

Vinton, IA 52349 • (42.5 miles) • Full Time • $18.00 to $20.00 / hr • 10/17/2026

We're Hiring! Millwork Production Specialist Custom Millwork & Finishing – Vinton, IA Full-Time · $18–$20/hr Build Quality. Build Craft. Build Your Future. Join a team where craftsmanship matters and every project reflects pride, precision, and teamwork. If you enjoy hands-on work and want a career with growth, stability, and great benefits this is your opportunity. What You'll Do: Prepare products for staining & painting. Apply stain by hand-wipe. Wrap, label & load finished products. Receive, record & rip lumber. Mold, sand & shape millwork components. What You Bring: Accurate tape measure skills. Ability to work with fractions. Strong communication & problem-solving. Commitment to safety & quality. Bonus: Experience in carpentry, construction, millwork, finishing, or woodworking tools.

Waterloo, IA • (43.6 miles) • Full Time • 10/15/2026

Company Description manufacturing company Job Description Job opportunity at a Northern Iowa manufacturing company. I am looking for a Manufacturing Engineer with a background in equipment manufacturability, automation, 5S, and process improvement. This company offers an excellent starting salary and benefits. Relocation assistance is available to qualified candidates. You should have an engineering degree and at least three years’ experience with a manufacturing company that uses complex production machinery to make durable metal products. Using your background in manufacturing engineering, determine machinery and power requirements that will meet production volumes. Work on capital equipment projects Develop PLC control systems, including some programming. Analyze production metrics to i

Marion, IA 52302-9677 • (44 miles) • Full Time • 10/15/2026

Description: SUMMARY: The Production Team Lead supports and guides production staff collectively with the production team to effectively manufacture quality products within the specified time limits while maintaining a safe and complaint work environment. This role ensures daily operations follow all required standard. ESSENTIAL DUTIES AND RESPONSIBILITIES Schedule: Saturday 12 hour shifts 7 am – 7 pm or 7 pm to 7 am, two 8-hour shifts to be scheduled Monday – Friday 2nd or 3rd shift Oversees/executes shared responsibility for equipment operation set up, start, monitor, and shut down on production line in collaboration with the Production Trainer Verify correct material preparation, resin selection, and proper line configuration prior to production runs, in collaboration with the Productio

Sumner, IA 50674 • (31.6 miles) • Full Time • 10/15/2026

Join the Team That Builds Life-Saving Vehicles Why Life Line? At Life Line, you won’t just build parts you’ll help build ambulances that save lives every day. When you join our team, you become part of something bigger. We foster a supportive, team-oriented environment where your skills grow, your hard work is valued, and your contributions truly make a difference. Position Summary Support the design, build, testing, and continuous improvement of the electrical systems in our ambulances. You'll work closely with electrical engineers, production teams, and quality staff to make sure every vehicle we build has reliable, safe, standards-compliant electrical systems. EMS crews depend on these systems in life-or-death situations. This is a hands-on role that splits time between the engineering

Farley, IA 52046 • (31.4 miles) • Full Time • 10/13/2026

DUTIES AND RESPONSIBILITIES: Set-up and operation of Hob(s). Production on Hob(s). Accept responsibility for the quality of products/services provided and performs all required checks. Maintain required documentation. Perform required preventive maintenance checks on equipment, watch and listen for abnormal conditions, and report concerns immediately. Maintain assigned work area in a clean and orderly manner. Perform other duties as assigned. KNOWLEDGE, SKILLS AND ABILITIES: Mechanical background and machine operating experience are helpful A willingness to learn and be trained on the EIMCo manufacturing process General skills with hand and power tools Experience working in a fast-paced environment Problem-solving and attention to detail The ability to multitask on a wide variety of projec

Waterloo, IA 50703 • (39.1 miles) • Full Time • 10/12/2026

Now Hiring - QualitySpecialist Ranew's Companies is seeking a QualitySpecialist to join our team in Waterloo, IA. We are only accepting applicants with Quality Assurance inspection experience. If you don't meet the below requirements, please do not apply. We are not training unqualified people at this time. Location: Waterloo, IA Salary: $18 - $25 / hour (starting pay is based on experience and shift) Job Type: Full-Time | 1st Shift Benefits: Performance Bonus, Paid Holidays, Medical, Dental, Vision, Life, 401K QA Specialist Responsibilities & Qualifications: Inspecting parts and equipment using different types of measuring equipment. Ability to inspect with skill, knowledge and assurance. Knowledge of measuring equipment: Calipers, Rulers, etc. Experience in a manufacturing environment. M

Dubuque, IA 52001 • (43.8 miles) • Full Time • 10/12/2026

Are you looking to jump start your professionalcareer growth with excellent advancement potential where you get to work outdoors and utilize leadership abilities? Join the Osmose team today as a Foreman! FACT: 90% of our Senior Management started with Osmose in the Foreman position! See the average income per Foreman Level here: www.osmosehiring.com/become -a-foreman Osmose Utilities Services, Inc. is an 80-year strong company that provides a variety of services to the electric and telecommunications industries. Learn more about us at www.osmose.com Transitioning Military Members and Veterans encouraged to apply! Why You'll Love to Work With Us (Our Benefits): Initially $20 per hour then increased after successful training and passing exams Opportunity for weekly production bonuses based o

Waterloo, IA 50703 • (39.1 miles) • Full Time • 10/11/2026

RFA Engineering (www.rfamec.com) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking an entry-level to experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includesopportunitiesfor professional growth, direct hire by our customers, and additional opportunities within our own organization. Entry Level Manufacturing Engineer As a Manufacturing Engineer you will apply Lean Manufacturing methodo

Marion, IA • (44 miles) • Full Time • 10/11/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior Controls Engineer who will be part of a growing business to support the design, deployment, testing, and maintenance of control system projects. Responsibilities

Waterloo, IA • (43.6 miles) • Full Time • 10/9/2026

WHO WE ARE We are a company where people matter . We are family driven . We are financially strong . And we are looking for problem-solvers to join our growing team. BENEFITS Up to 10% Retirement Contribution $600 per Year Wellness Incentive Front-loaded Paid Time Off Medical, Dental, and Vision - Eligible f irst day of the month following hire date. JOIN A TOP WORKPLACE - https://www.youtube.com/watch?v=7nlFHnnfvhk CONTROLS ENGINEER The Controls Engineer is an individual contributor responsible for evaluating, designing, programming, commissioning, and sustaining Hydrite's control systems (PLC/DCS/HMI) and related instrumentation. This role executes standards, implements changes through the MOC process, maintains Maximo PM/calibration plans, and ensures reliable data collection and histor