Asheboro, NC • (15.6 miles) • Full Time • 10/16/2026

We are looking for a thorough Maintenance Technician to undertake the responsibility to preserve the good condition and functionality of premises. You will perform maintenance tasks of great variety such as painting, HVAC installations, landscaping etc. A Maintenance Technician is a thorough professional with a practical mind and attention to detail. The ideal candidate will be able to work autonomously and responsibly by observing all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition.The ideal candidate for this position:Proven experience as maintenance technicianBasic understanding of electrical, hydraulic and other systemsKnowledge of general maintenance processes and methodsWorking knowledge of tools, common appliances a

Winston-Salem, NC 27105 • (23.5 miles) • Full Time • 10/16/2026

Summary/ObjectiveThe role of the Maintenance Technician II is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain complex production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the production goals and corporate values of Corsicana Mattress Company. Must adhere to established safety and efficiency standards.Essential Functions:Schedules, completes, and documents Preventative Maintenance on select equipment and machinery on a regular basis.Perform complex machinist duties to diagnose problematic situations.Read and interpret equipment manuals, schematics, technical drawings, and work orders to perform required maintenance and service.Troubleshoots and diagnoses complex repai

Burlington, NC 27217 • (41.2 miles) • Full Time • 10/16/2026

Description: Perform preventive maintenance on knitting machines, repair machine stops and breakdowns flagged by Operators, and make style changes. Check runners, tighten warp collars, and keep bad end motors clean, replace worn machine parts, repair machine oil leaks, replace bad or broken needles, sinkers, guides, sliders, cover rollers, set guide bars, repair signal rollers, bad push rods/studs, selvage spreaders, and transmissions, replace bad guide bar slides/brackets, worn/frayed belts, bad boots/parts around boots. Change and time pattern wheels or chains, level guides, sinkers, needles and closing wires, set runners and take-ups, change ratios, check course counts, obtain samples, tighten warps, inspect machines for fabric defects, excessive noise levels, etc.Requirements: High sch

Thomasville, NC • (4 miles) • Full Time • 10/16/2026

OneSparQ is looking for a Senior Planning Analyst in Thomasville, NCRequired Skills:4+ years of experience in production planning, supply planning, demand planning, scheduling, inventory planning, or a related supply chain function.Experience working with production schedules, inventory requirements, demand forecasts, purchasing, and/or material planning.Strong understanding of supply chain planning concepts including demand, supply, inventory, capacity, lead times, and production scheduling.Additional Skills: (not required)Bachelor's degree very strongly preferred - Must have much more experience without oneStrong Microsoft Office/Excel skillsExperience planning at the SKU/product levelResponsibilities:Monitor and manage inventory levels to meet customer demand and budget goalsDevelop and

Randleman, NC 27317 • (11.8 miles) • Full Time • 10/16/2026

Do you have extensive experience and technical expertise in the automotive industry? Are you looking for a company that invests in its employees, technology, and equipment? If so, Thomas Tire & Automotive is the place for you! We are seeking a Master Level Automotive Technician to join our exceptional team.BenefitsUp to 4 weeks of vacation/paid time offPaid holidays (8 days)Performance based bonuses75% Employer paid medical, dental, & vision insurance$25,000 of life insurance per employeeSupplemental benefits (long-term, short-term, accident, etc.)401(k) retirement plan with company matchMonday-Friday, 8am-5pmCareer path & advancement opportunitiesIn-house training programDiscounts on tires & automotive servicesCompany supplied toolsPaid weeklyBasic ResponsibilitiesReview work orders and d

Greensboro, NC 27407 • (12 miles) • Full Time • 10/16/2026

Job Title:Boiler Service and Start-up Technician – Commercial/IndustrialReports to:Area Manager or Director of Technical OperationFLSA Status:Full Time, Non-Exempt (Eligible forovertime)Position Purpose:The primary purpose of the Boiler Service and Start-up Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial hydronic equipment. Strong emphasis on customer service. Our technicians will work with extremely specialized equipment, that are responsible for hydronic heating and potentially domestic water systems in schools, hospitals, office buildings, industrial buildings, universities, manufacturing facilities or other large institutions. The Boiler Service and Start-up Technician may occasionally involve after hour call

Randleman, NC • (12.1 miles) • Full Time • 10/16/2026

Our client, a leading manufacturer of disposable food packaging products, in seeking multiple Controls Electricians to join their night shift team in Randleman, NC where your electrical expertise will keep high-speed manufacturing lines running at full power. You'll work with PLCs, industrial controls, microprocessor systems, and complex circuits to troubleshoot, repair, and upgrade plant equipment and facility systems.Shift Availability:8pm-8amResponsibilities:Maintain, install, and repair equipment, electrical systems and facility electrical systems.Utilize electrical, pneumatics, hydraulics, and temperature and pressure gaugesMaintain and utilize maintenance systems for work orders, breakdown reporting and track machine modifications.Diagnose malfunctioning apparatus such as transformer

Asheboro, NC • (15.6 miles) • Full Time • 10/16/2026

Facilities Electrician | $25–$27 per hour DOE | Monday–Thursday, 6:00 AM–4:30 PMWhat Matters MostCompetitive Pay of $25–$27 per hour, depending on experienceSchedule: Monday through Thursday, 6:00 AM to 4:30 PM, with overtime and on-call work as necessaryLocation: Asheboro, NCProject-based opportunity supporting the upfit of a new facility locationWeekly Pay with direct deposit or pay cardWhen you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401(k), direct deposit and the referral bonus programJob Description An established employer is seeking a skilled Facilities Electrician to support the electrical upfit of a new location in Asheboro, NC. This position will install, maintain, troubleshoot, and repair electrical systems

Asheboro, NC • (15.6 miles) • Full Time • 10/16/2026

The Facilities Electrician installs, maintains, troubleshoots, and repairs electrical systems serving buildings, grounds, and production support equipment. This position works across multiple facilities and is expected to complete electrical work safely, accurately, and in accordance with applicable codes, company standards, and individual qualifications. Schedule: Monday through Thursday 6:00 am to 4:30 pm with overtime, travel between locations, and on-call work as necessary. Responsibilities: · Install, maintain, troubleshoot, and repair facility lighting, receptacles, branch circuits, panels, disconnects, transformers, motors, controls, and related electrical systems. · Bend and install Rigid, IMC, and EMT conduit with minimal supervision. · Pull, label, terminate, test, and document

Greensboro, NC 27406 • (16 miles) • Full Time • 10/16/2026

Maintenance Technician Greensboro, NC Full-TimeShift: Various shifts availablePosition Summary We are seeking a skilled and dependable Maintenance Technician to support the operation, maintenance, and repair of manufacturing equipment within a high-speed packaging production environment. The Maintenance Technician will be responsible for troubleshooting mechanical, electrical, pneumatic, and hydraulic systems to ensure maximum equipment uptime, production efficiency, and workplace safety.The ideal candidate will have strong industrial maintenance experience, a proactive approach to problem-solving, and the ability to work independently and as part of a team in a fast-paced manufacturing setting.Essential Duties & Responsibilities Perform preventive, predictive, and corrective maintenance o

Greensboro, NC 27410 • (18 miles) • Full Time • 10/16/2026

Role Snapshot Based in Greensboro, NC, you’ll be the go-to expert keeping our production lines, utilities, and facility assets running flawlessly. From mechanical tear-downs to PLC diagnostics, you’ll blend hands-on skill with smart troubleshooting to maximize uptime. A Day in the Life Start your 7am–7pm shift by reviewing work orders and PMs in Maintenance Connection, prioritizing what keeps the floor moving.Walk the line: inspect automation cells, listen for anomalies, and tackle preventive maintenance to head off unplanned stops.When a process hiccups, you dive inmechanical, electrical, pneumatic, or hydraulicisolating faults with PLCs, VFDs, and servo diagnostics.Use our computer-based parts system to identify, request, and document the right spareskeeping inventory accurate and downti

Greensboro, NC • (18.3 miles) • Full Time • 10/16/2026

We are actively seeking qualified career candidates for a Graphics/ Paint Protection Installer position. Primary responsibilities include the installation of vehicle and architectural graphics, vinyl lettering, wraps, and paint protection films. This is not a remote position; full-time in-shop presence is necessary. Experience is appreciated but not necessary. There will be on-the-job training. The position begins with a 90 day trial period. Essential Duties and Responsibilities include:- Applying vinyl and digitally printed graphics, decals, and lettering to cars, trucks, vans, fleets, boats, buses, walls, windows, signs, etc.- Architectural graphics - including but not limited to textured decals, window decals, and banners.- Vinyl removal- Assist in maintaining neat and orderly work site

Greensboro, NC • (18.3 miles) • Full Time • 10/16/2026

Description: ARE YOU LOOKING FOR:*A COMPANY WHERE YOU ARE TREATED LIKE FAMILY AND NOT AN EMPLOYEE?*A CONSISTENT YEAR-ROUND WORK SCHEDULE?*WORK/LIFE BALANCE COMPLIMENTED BY A FLEXIBLE SCHEDULE?*LOCAL TRAVEL WITHIN A 2.5-HOUR RADIUS OF YOUR RESIDENCE?Join us today at DOC Services Inc.!For over 35+ years, DOC has provided our trusted partners with innovative, custom, total facility solutions for their commercial equipment needs. As part of our continued growth, we are hiring skilled Commercial HVAC/ Refrigeration Technicians. As an integral part of our team, you will be responsible for performing preventative maintenance and repairs on Commercial HVAC Units and light commercial refrigeration equipment.Essential Functions:Performing preventative maintenance and repairs on Commercial HVAC Units

Winston-Salem, NC 27103 • (21.5 miles) • Full Time • 10/16/2026

Maintenance TechnicianRelocation assistance is available to the right candidate.Golding is growing! As we continue to expand to meet increasing demand, we’re looking to add talented MaintenanceTechnicians to our team. This is an exciting time to join us, with new opportunities emerging across our operations. Currently, we operate on a 2-2-3, 12-hour schedule that will support 24/7 coverage. If you're looking for a stable, forward-moving company where your skills are valued, we’d love to hear from you.Job DescriptionSummary:The Maintenance Technician is responsible for repairing and adjusting equipment as needed to ensure it operates according to manufacturer’s specifications and production requirements.Primary Tasks/Responsibilities:Services, repairs, adjusts and test various machinery, de

Advance, NC • (22.7 miles) • Full Time • 10/16/2026

Join the Team at Oak Valley Golf Club as a Golf Course Maintenance Crew Member!Are you someone who enjoys working outdoors and takes pride in creating beautiful spaces? Oak Valley Golf Club, nestled in the scenic town of Advance, NC, is looking for dedicated individuals to join our Golf Course Maintenance team. Whether you’re experienced or just starting out, this is a fantastic opportunity to be part of a team that ensures our course remains a top-notch destination for golfers.What You'll Be DoingAs a member of our Golf Course Maintenance team, your role will be vital in keeping our course in pristine condition. Your daily responsibilities will include:Maintaining the greens, fairways, and bunkers to ensure optimal playing conditions.Operating and maintaining landscaping equipment such as

Whitsett, NC 27377 • (25.4 miles) • Full Time • 10/16/2026

Required Experience3+ years of industrial maintenance, manufacturing engineering, controls, automation, or related technical experience preferred.Hands-on experience troubleshooting mechanical and electrical manufacturing equipment.Experience performing and/or developing preventive maintenance activities.Experience troubleshooting production downtime in a manufacturing environment.Working knowledge of PLC-controlled equipment.Experience reading electrical schematics and technical drawings.Strong mechanical troubleshooting and repair skills.Experience working with industrial automation equipment.

New London, NC 28127 • (30.7 miles) • Full Time • 10/16/2026

Extrusion Mechanic - First ShiftNew London, NCPay: $25.00-$30.00/hour, with potential up to $35.00-$38.00/hour for highly experienced extrusion maintenance professionals.A growing manufacturing company is seeking a hands-on Extrusion Mechanic / Maintenance Technician to support the maintenance, troubleshooting, and repair of extrusion production equipment. This role is critical to maintaining equipment reliability, minimizing downtime, and supporting safe, efficient manufacturing operations.ResponsibilitiesTroubleshoot and repair extrusion lines and production equipmentPerform preventive and corrective maintenanceDiagnose mechanical, electrical, hydraulic, and pneumatic issuesRepair motors, gearboxes, pumps, conveyors, drives, and industrial equipmentRespond to equipment breakdowns and pro

Kernersville, NC • (16.5 miles) • Full Time • 10/15/2026

We are looking for excavator operators and or pipe layers with experience to join our team! Experience is preferred, but willing to train. You must be dependable, hard working, and ready to work. Pay rate based on experience for type of work. We look forward for you to join OUR Team!

High Point, NC 27263 • (4.6 miles) • Full Time • 10/15/2026

Job Summary:The Maintenance Technician supports IMMI/APLP operations company-wide by performing machine maintenance, repairs, and continuous improvement initiatives. This role is responsible for inspecting, maintaining, and repairing machinery, equipment, and facility systems to ensure optimal performance, safety, and minimal downtime. The technician is expected to efficiently manage time and resources while upholding a high standard of professionalism. Responsibilities include both preventive and corrective maintenance to support production and operational schedules across all locations.Primary Duties and Responsibilities:Evaluate and prioritize maintenance tasks to ensure timely and effective completion, while proactively implementing preventive measures to reduce equipment downtime.Comm

High Point, NC 27263 • (4.6 miles) • Full Time • 10/15/2026

Aerial Foreman We are a Growing Utility Contracting Company seeks the following:· Experienced Lineman to lead an Aerial crewRequirements:• High school diploma or General Education Diploma (GED) preferred• Previous experience in standard and high-risk areas a preferred• Experienced in Aerial fiber and coax construction• Previous experience in operating a T-40 or equivalent preferred• Knowledge of Aerial telecommunications strand, cable and fiber placement• General knowledge of Aerial strand, cable and fiber construction practices• Must be able to read and understand HFC design prints• Must possess a valid Driver’s License (CDL) is a plus but is not required• Ability to work in various environments/settings with moderate to loud noise levels• Capable of working at heights up to 60ft above th

Thomasville, NC 27360 • (5.2 miles) • Full Time • 10/15/2026

Pennybyrn has an opportunity for a Maintenance Technicianto join our innovative, inclusive, and compassionate life-enriching community!This full-time position performs a variety ofroutine, non-routine, and skilled maintenance and repair of the facility's buildings and equipment. Maintenance also handles work orders for electrical, plumbing, heating, and air conditioning, as well as daily maintenance, safety checks, cosmetic changes, and miscellaneous needs. This position shares in on-call rotation once every 8 weeks.Ideal candidates for this position will have at least two year's maintenance experiencewith large volumes of residential and/or commercial clients. Candidates must also be dependable, have exemplary customer service, and committed to getting the job done right!Why work with Pen

High Point, NC 27262 • (6.2 miles) • Full Time • 10/15/2026

Function The Maintenance Technician I is responsible for maintaining all Hanes Dye and Finishing, Geo Components, and facility equipment. Maintenance Tech I oversee performing routine preventative facility and machine maintenance and are to maintain a high-quality standard through good preventative maintenance practices. DutiesClean and inspect machines for worn, damaged, or mis-aligned parts.Perform preventive maintenance, repairs, and replacements as needed.Working knowledge of pneumatic systems, fluid handling, and electrical systems.Respond to calls in a timely manner and quickly troubleshoot manufacturing breakdowns to prevent unnecessary downtime.Replace or rebuild worn guides, belts, bearings, gearboxes, and pumps.Perform Boiler startup, blowdown procedure, and facility water treatm

Sophia, NC 27350 • (8.3 miles) • Full Time • 10/15/2026

Engineered Steel Products (ESP) is a North Carolina based steel fabrication company providing structural steel for the construction industry. ESP’s vision is to provide world-class structural steel to customers across its product range that incorporates:This position involves the precise fitting, aligning, and welding of structural steel components. The role requires heavy experience reading and interpreting blueprints.Responsibilities:Interpret and analyze blueprints, drawings, and specifications to determine welding and fitting requirements.Fit and assemble structural steel components using measuring tools, clamps, and welding equipment.Perform FCAW and MIG welding to join steel parts according to industry standards.Inspect welded joints and structural assemblies for quality, accuracy, a

Randleman, NC 27317 • (11.8 miles) • Full Time • 10/15/2026

Responsibilities:Supervise and direct rigging crews during setup, execution, and dismantling of rigging operations.Develop lift plans and coordinate with engineers and project managers to ensure safe and efficient rigging procedures.Inspect rigging equipment regularly to ensure compliance with safety standards and operational readiness.Train and mentor rigging personnel on proper techniques, safety protocols, and equipment handling.Monitor job site conditions and enforce adherence to OSHA and company safety regulations.Maintain accurate records of rigging activities, equipment inspections, and incident reports.Collaborate with other trades and departments to synchronize project timelines and resource allocation.Minimum Qualifications:Experience in the rigging field, including machinery ins

Greensboro, NC 27409 • (15.4 miles) • Full Time • 10/15/2026

Shop Diesel Technician Location:Greensboro, NCBuild Your Career in a Shop That Keeps You Busy. At National Fleet Management, our technicians don't spend their day waiting for work, they spend it doing what they do best.We're looking for experienced Diesel Technicians who take pride in their craftsmanship, enjoy solving mechanical problems, and want to work in a professional shop environment with consistent work, modern equipment, and opportunities to grow.Whether you're looking to advance your career or simply want a shop that values your experience, we'd love to meet you.Why Join National Fleet Management? National Fleet Management is one of the fastest-growing heavy-duty truck service companies in the Southeast.Multiple full-service repair facilitiesServing commercial fleets across 9 st

Greensboro, NC 27406 • (16 miles) • Full Time • 10/15/2026

SUMMARY:The HVAC Service Technician serves customers by installing and servicing systems and products. This position fosters positive customer interactions by identifying system issues and completing repairs to the satisfaction of the customer and the company.ESSENTIAL DUTIES AND RESPONSIBILITIES:The requirements listed below are representative of the knowledge, skill, and/or ability, and physical demands required. Serves existing accounts by analyzing service orders, planning daily travel schedules, investigating complaints, conducting tests and resolvingproblems.Establishes service by studying system requirements, ordering and gathering components and parts, completing installation and performing acceptancetests.Maintains rapport with customers by examining complaints, identifying soluti

Lexington, NC 27295 • (17.2 miles) • Full Time • 10/15/2026

Company Description Remember the last time you opened a bottle of champagne, a cold beer after a hard day’s work or a bottle of sparkling mineral water to quench the thirst, well it was probably made by us, we are O-I and we love that we make more glass containers than anyone in the world.O-I has more than a century of experience crafting pure, sustainable, brand-building glass packaging for many of the world’s best-known food and beverage brands. We are proud to provide high quality glass packaging for beer, wine, spirits, food, non-alcoholic beverages, cosmetics and pharmaceuticals.Job Description As the Machine Repair Supervisor, you'll lead a skilled team responsible for the repair, maintenance, installation, and rebuild of critical glass manufacturing equipment. In this highly visible

Asheboro, NC 27205 • (18.5 miles) • Full Time • 10/15/2026

Do you have extensive experience and technical expertise in the commercial vehicle repair? Are you looking for a company that invests in its employees, technology, and equipment? If so, Thomas Tire Commercial & Off-road is the place for you! We are seeking a heavy-duty technician to join our exceptional team.BenefitsUp to 4 weeks of vacation/paid time offPaid holidays (8 days)Performance based bonuses75% Employer paid medical, dental, & vision insurance$25,000 of life insurance per employeeSupplemental benefits (long-term, short-term, accident, etc.)401(k) retirement plan with company matchMonday-Friday, 8am-5pmCareer path & advancement opportunitiesIn-house training programDiscounts on tires & automotive servicesCompany supplied toolsPaid weeklyBasic ResponsibilitiesReview work orders and

Winston-Salem, NC • (21.1 miles) • Full Time • 10/15/2026

Maintenance Tech We are seeking a skilled and reliable Maintenance Tech to support the overall upkeep and functionality of our property. This role includes performing routine maintenance, addressing guest requests, and ensuring all systems operate safely and efficiently. The ideal candidate has a strong work ethic, basic knowledge of building systems, and a commitment to providing a safe and well-maintained environment. FT $17/hourESSENTIAL FUNCTIONS: (include the following. Other duties may be assigned.) Visually inspects and tests machinery and equipment. Listens for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine. Dismantles defective machines an

Greensboro, NC 27405 • (22.5 miles) • Full Time • 10/15/2026

Maintenance Technician - Revolution Mill in Greensboro, NCWho We Are:At Kane Realty Corporation, we pride ourselves in taking an innovative approach to creating a sense of home and community for our residents, thus enhancing value for our investors. We are committed to providing an unrivaled customer experience by practicing excellence in all we do, driving us to not only exceed the industry standards of sophisticated management, but to set them. The key to our success starts with our people. We hire first for character, second for ability, and third for experience, thus building a passionate and dedicated team.Kane is focused on creating places with large-scale, mixed-use development, multi-family, office, hotel and retail projects. We own and/or manage residential communities in North Ca

Liberty, NC 27298 • (24.7 miles) • Full Time • 10/15/2026

About This RoleA leading automotive and EV-battery manufacturer is hiring a Battery Manufacturing Engineer in Liberty, NC (100% onsite) to support EV battery equipment and assembly operations. The role focuses on calendaring processes (foil, paper, steel), laser cutting and laser welding of foil and metal sheets, hands-on assembly operations, and battery electrode processes.

Elon, NC 27244 • (37.4 miles) • Full Time • 10/15/2026

Job Summary:Driver is responsible for transporting material, packages, equipment and other items from the Pre-Fab facility to project sites. Their primary duties include loading vehicles, securing loads for transport, using navigation systems and delivering to the correct addresses in a timely mannerResponsibilities:Maintains loading, unloading and distribution of materials using forklift or other equipment.Reviews weekly delivery schedule and plans loads accordingly.Verifies all loads for accuracy and safety.Ensure all required documents are handed over to job team upon delivery of materials.Openly communicates with management and job teams.Maintain cleanliness and physical condition of shipping and receiving departments, inside and out.Prepare fleet vehicles to be sold by removing tags a

Archdale, NC • (3.4 miles) • Full Time • 10/15/2026

Company Description At Techo-Bloc, we aren’t just paving patios – we’re paving the way for great careers! Founded on a culture of innovation, we manufacture landscaping products focused on design, durability and flair. Our growing team is seeking passionate people, ready to make an impact.Job Description Salary: $60k - $65k per yearLocation:Archdale, NCSchedule: Monday - Friday 7am - 4pmThe Yard Coordinator will be responsible for the continued growth and development of the operation, including the hands-on management of incoming and outgoing product movement. The Yard Coordinator will perform all daily functions, including forklift operation, computer transactions, and clerical duties required to develop and maintain the operation in all weather conditions.PRINCIPAL DUTIES AND RESPONSIBIL

High Point, NC 27260 • (5.6 miles) • Full Time • 10/15/2026

Why Build your career at Ari Apartment Management?Ari Apartment Management is a recognized leader in the multi-family housing industry. Owner-operated for over 20 years, our goal has been to provide a superior lifestyle to our residents. The company currently manages over 15,000 apartment homes at 40 properties in the Carolinas, Tennessee, and Texas. RE Carroll Management is committed to presenting the best apartment homes possible for our residents through innovative programs, preferred amenities, sustainable practices, and a unique sense of community.Why Work for us?Thriving culture that promotes safety first for all our employees.Uniform PackageQuarterly BonusPaid Training & CertificationsComprehensive medical, dental and vision benefits in addition to 401K, 401K match, Short Term Disab

Greensboro, NC • (18.3 miles) • Full Time • 10/15/2026

MBA Consulting Services, Inc. is seeking an experienced Public Sector/Commercial Construction Project Manager also experienced in repairs and alterationsto support the US Postal Service’s Repair & Alterations (R&A) team. As a Construction Project Manager, you will manage nationwide repair and alteration projects. The ideal candidate will have experience in facility build-outs, minor construction projects, and public-sector regulations, making informed decisions to drive compliance and efficiency. This position requires the individual tobe fully onsite for a six-month probationary period during which performance will be evaluated. Upon successful completion of this period, the option to work remotely one day per week may be offered. Join our team and contribute to improving accessibility ac

Pine Hall, NC 27042 • (32.3 miles) • Full Time • 10/15/2026

OverviewWieland - Creating Value for Generations!Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material.Wieland's Cultural ValuesWieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities.With our cultural vision, we place our core values at the heart of everything we do:safety,ambition,optimism,reliability,ownership,diversity, &respect.Wieland is hiring a Senior Electrician. The Senior Electrician will be responsible for daily installation, maintenance

Harmony, NC • (43.2 miles) • Full Time • 10/15/2026

Job Opportunity: Project Manager with Lamboo Medical in Harmony, North CarolinaOnsite | 6-Month Contract AssignmentDo you have experience managing projects in manufacturing, construction, commercial construction, engineering, or industrial environments? Have you successfully coordinated multiple stakeholders, managed timelines and budgets, and driven projects from concept through completion? If you answered yes, we want to speak with you!Lamboo Medical is seeking an experienced Project Manager to support key operational and business initiatives. This role will be responsible for planning, coordinating, and overseeing projects from initiation through completion while ensuring they are delivered on time, within scope, and within budget. The ideal candidate will thrive in a fast-paced environ

Thomasville, NC 27360 • (5.2 miles) • Full Time • 10/15/2026

Piedmont Crossing, a vibrant continuing care retirement community dedicated to enriching the lives of our residents, is seeking a dynamic and passionate and knowledgeable Maintenance Technician to join our team. Piedmont Crossing is a premier retirement community located in the picturesque Davidson County, North Carolina. We offer a blend of small-town charm and access to the amenities of nearby cities like Greensboro, High Point, and Winston-Salem.Maintenance Tech IIThe Maintenance Technician II provides assistance in maintaining the property, plant and equipment of the facility.Maintains mechanical and electrical equipment in operable conditions.Performs maintenance tasks in accordance with procedures and preventative maintenance schedule.Responds to maintenance requests by Residents and

High Point, NC 27262 • (6.2 miles) • Full Time • 10/15/2026

Maintenance Technician – Join a Team That Keeps Things Running Smoothly!Are you a hands-on problem solver who takes pride in fixing, building, and maintaining? Do you enjoy making a real difference in a healthcare setting? We’re looking for a skilled Maintenance Technician to help keep our facility safe, comfortable, and running at its best for both residents and staff. One year of long-term care experience required What You’ll DoAs our Maintenance Technician, you’ll be the go-to expert for keeping everything in top shape. No two days are the same!Maintain and repair mechanical and electrical equipment to ensure smooth operationsRespond quickly to maintenance requests from residents and staffPerform a variety of repairs including HVAC, plumbing, electrical, carpentry, painting, and plaster

Sophia, NC 27350 • (8.3 miles) • Full Time • 10/15/2026

ProTrade is looking for experienced Structural Steel Fitters for a shop-based project in Sophia, NC.ScheduleMonday – Friday: 6:00 AM – 3:30 PMApproximately 45 hours per weekUp to 3 Saturdays per month (half or full days)Total hours typically range from 49–54 hours per weekWhat You'll Be DoingReading and interpreting blueprints, drawings, and specifications to determine fitting and welding requirementsLaying out and fitting structural steel components using measuring tools, clamps, and welding equipmentTacking assemblies in place and performing mockups for welders to complete FCAW and MIG weldingFitting and assembling structural steel components to precise specificationsInspecting welded joints and structural assemblies for quality, accuracy, and compliance with safety regulationsMaintainin

Greensboro, NC 27407 • (12 miles) • Full Time • 10/15/2026

K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources.We pride ourselves on attracting and developing top talent, building a culture of excellence, and forging meaningful, long-term relationships with our clients and communities, wherever they are in the world.Powered By Innovation, Passion, And Purpose.Start your K&A Career: We are seeking a highly motivated and skilled Consultant Project Manager to