Mt. Laurel, NJ 08054 • (28.4 miles) • Part Time • 10/20/2026

Your Impact The Warehouse Specialty Associate is primarily responsible for executing customized services offered by the warehouse. Warehouse Specialty associates work in the areas of Fabrication and/or Paint and are responsible for handling product safely to ensure we provide white glove customer service through accurate fulfillment of orders. What You Will Do Maintain the highest safety standards while operating specialized equipment, including proper use of PPE and adherence to OSHA requirements. Create custom products that meet our premium quality standards through expert fabrication and assembly. Operate precision equipment skillfully – from industrial saws in fabrication to paint mixing systems and tinters. Ensure accurate order fulfillment by properly labeling, tagging, and preparing

South Brunswick Township, NJ 08810 • (29.1 miles) • Full Time • $23.53 / hr • 10/18/2026

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Converting Utility Dayton NJ 3rd Shift (10pm-6am) Pay: $23.53 an hour Overtime: frequent overtime up to 4 hours daily The opportunity Primary job duties will include but not limited to safely perform a wide range of tasks supporting the manufacturing areas, production, conducting quality checks, material set-up, and maintaining a clean and organized workspace. The ideal candidate will ha

BRISTOL, PA 19007 • (27.4 miles) • Full Time • 10/18/2026

Staff Engineer, Manufacturing Work Mode: Onsite Location: Onsite – Bristol, PA Opportunity SPECIFIC RESPONSIBILITIES Functions as the Operations lead on all New Product Introductions and any new manufacturing capabilities needed to support new products strategies, working cross functionally with New Product Development, Marketing, and Supply Chain to introduce new products on-time and within the scope of business objectives. Suggest improvements to the NPI process as needed. Provides input to the NPD team on design for manufacture and process capabilities with Safety / Ergonomic and Quality considerations. Supports make vs. buy decisions with supporting analysis. Leads the Process Failure Mode and Effect Analysis for the plant during product launch phases as well as implementation of

South Plainfield, NJ 07080 • (42.6 miles) • Full Time • $17.00 / hr • 10/18/2026

Summary: The Production Worker is under the direction of the shift supervisor and will primarily be responsible for assembly of reconditioned products using established production procedures, following safety protocol and adhering to company’s quality standards. Responsibilities: Demonstrates ability to meet production standards on specific assignments within required time Maintains good housekeeping and clean work areas in assigned space Performs all assignments in accordance with safety specifications, instructions, and requirements Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Reports all production waste/issues to Production Lead o

Whiting, NJ 08759 • (1.5 miles) • Contractor • 10/18/2026

Taskrabbit is looking for capable, self-motivated individuals to join our global network of independent service providers, who we call Taskers. In this role, you'll help clients assemble a wide range of furniture items, from simple chairs to bed frames or larger modular systems. Whether you have prior assembly experience or are just confident with your IKEA assembly experience, joining our platform allows you to flexibly run your own business by setting your own rates and accepting assembly tasks that match your level of experience. As a Tasker, you have the freedom to choose where and when you work so you can build a career that fits your lifestyle. The Taskrabbit Platform offers you an opportunity to grow your skills and develop a network of loyal clients. Please Note: This is not an emp

Levittown, PA • (28.5 miles) • Full Time • 10/26/2026

American Conveyor Systems Job Description Levittown, PA Mechanical Assembler We have an immediate opportunity available for a Mechanical Assembler to join our growing team (6:30am - 3:00pm). This position assembles powered conveyor units and specialty equipment for material handling systems. Requirements Prepare and assemble conveyor parts and components to produce finished conveyors/systems. Assemble units with motors and reducers. Fit, align and adjust components and sub-assemblies. Ability to read and comprehend Engineering drawings and Bills of Material. Flexibility & willingness to adapt to frequently changing priority/tasks as assigned by Shop Foreman. Willing to work overtime as required. Proven reliability, attendance & punctuality. Must have own non-powered hand tools and the abil

Fairless Hills, PA • (29.3 miles) • Full Time • 10/26/2026

Main functions: The Maintenance Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. Reports to: Maintenance Manager Essential Functions: Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service Perform simple machinist duties and responsibilities Perform mechanic skills including, but not limited to, mechanical, ele

Moorestown, NJ 08057 • (30.1 miles) • Full Time • $16.50 / hr • 10/26/2026

Team Members At CAVA, we love what we do, and we try and make every day as fulfilling as the last.Our restaurants need team members to make the magic happen every day.Everyone matters and we’re here to celebrate your growth. We foster a culture built on five core values: Positivity –Every one of us can change someone’s day for the better. Transparency –We use transparency to help us make decisions through open dialogue Humility – We can always find ways to improve. Fanaticism – We are passionate about the opportunity to turn every guest into a fanatic. Thoughtfulness –We go above and beyond for our guests, our teams and communities. The Role: Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting gues

Philadelphia, PA 19019 • (35.5 miles) • Full Time • 10/26/2026

Hours: 8:30-5:00 Local Time Location: Remote or hybrid, depending on your area Compensation: $65,000 - $150,000 Who We Are: Welcome to USG, a distinguished national wholesale broker and managing general agent (MGA) with a prominent presence across the nation. Our extensive network spans over 400 different markets and we proudly write business in all 50 states. USG has consistently earned recognition for our excellence, being ranked as a 5-star MGA by Insurance Business of America for four consecutive years. Moreover, we take pride in our continuous acknowledgment as a Top Insurance Workplace over the past five years, as voted on by our current team members. We at USG prioritize fostering a collaborative and mentoring-focused environment. We recognize the pivotal role each team member plays

Philadelphia, PA 19124 • (38.3 miles) • Full Time • $20.00 to $28.00 / hr • 10/26/2026

Benefits: Competitive salary Free uniforms Opportunity for advancement Paid time off Training & development We’re a fast-growing, full-service signage and branding company seeking a skilled CNC Router Operator to join our fabrication team. This role is essential to the production of custom signs, architectural elements, and branded displays for major national accounts. Responsibilities: Operate CNC router machines to cut and shape sign materials (acrylic, aluminum, wood, etc.) Interpret shop drawings, blueprints, and material layouts Load and unload materials on the CNC table with care and accuracy Perform routine maintenance and troubleshooting on equipment Work closely with fabrication and design teams to ensure precision and efficiency Maintain clean and organized work area and follow a

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Our client, a highly respected U.S.-based specialty chemical manufacturer with more than 60 years of industry leadership, has created a new Sr Process Technology Development Engineer - EVA High Pressure Processing position at their Pennsylvania headquarters. In this highly visible position, you will serve as the company's primary technical resource for EVA high-pressure processing and reactor technologies, partnering with Operations, R&D, Maintenance, Quality, and Engineering teams to improve manufacturing performance and support long-term growth initiatives. This role ensures safe, reliable, and efficient high-pressure processing operations, including equipment improvements, scale-up, troubleshooting, capital projects, and technology transfer. This role represents a significant investment

Monroeville, NJ 08831 • (25.3 miles) • Full Time • $18.00 to $24.00 / hr • 10/26/2026

Job Title: Manufacturing Operator Job Description Join a thriving company as a Manufacturing Operator where you will play a crucial role in producing pharmaceutical products in a regulated environment. Contribute to our growing manufacturing department while enjoying a supportive, family-like atmosphere. Responsibilities Follow all procedures and policies in the manufacturing facility. Read and update training records with the latest versions of SOPs. Clean, set up, and operate all related equipment in the manufacturing facility. Produce pharmaceutical products according to cGMP standards. Follow Good Documentation Practices. Coordinate with the Quality Assurance Department for line clearance after cleaning. Collaborate with the Engineering Department or Production Supervisor for equipment

Cranbury, NJ 08512 • (25.9 miles) • Full Time • $18.00 to $20.00 / hr • 10/26/2026

Join the CRP Team! We are currently searching a technician to be responsible for inspection and testing of a variety of manufactured products as well as be a support role for several areas of manufacturing, including but not limited to; shipping, quality and assembly. The salary range begins at $18-$20/hr. depending on experience. This is a direct hire position in a family-owned company that has been in New Jersey for over 70 years. CRP follows best practices and protocols for COVID that has resulted in a staff that feels safe each day in our environment. We are proud to be an essential employer that remained safely open during the pandemic and continues to operate. We provide our employees with meaningful work and relationships that support a healthy employee experience. CRP offers a comp

Bristol, PA 19007 • (27.5 miles) • Full Time • $45,000 to $55,000 / yr • 10/26/2026

Job description: The role will work closely with the Warehouse, Logistics, Purchasing, Sales, and Quality/QA teams to ensure that products received and distributed in the U.S. meet established company quality and food safety standards. Key Responsibilities 1. FDA/FSMA/GMP/ FSVP · Document FDA and USDA regulations utilizing self-generated quality assurance and quality control guidelines. · Conduct preliminary testing (in-house or outside lab) and evaluation of products in support of FDA regulations. · Participate in preparation of submission to FDA/FSMA / FSVP and other regulatory agencies. · Participate in regular internal and FDA/GMP regulatory inspections and audits. · Verify all FDA documentation on all products imported. · Maintain extensive documentation adhering to FDA guidelines. ·

Monmouth Junction, NJ 08852 • (30.7 miles) • Full Time • $1 / yr • 10/26/2026

Princeton NuEnergy (PNE) is an advanced materials manufacturing and technology company with the most cost-effective and capital-efficient process for the production of battery-grade cathode active material (CAM) for lithium-ion batteries. Built on a proprietary, closed-loop platform, PNE's high-performing technologies span multiple high-growth materials businesses, including Rejuvenation (Cathode-to-Cathode® direct recycling), Advanced Black Mass, Upcycled® CAM, and morestrengthening the domestic battery supply chain while supporting U.S. energy independence and national security priorities. Overview We are seeking a highly motivated Research Fellow to join our R&D team through the New Jersey Innovation and Research Fellowship Program (IRFP) for an anticipated two-year fellowship . Working

Somerset, NJ 08873 • (37.8 miles) • Full Time • $25.00 to $30.00 / hr • 10/26/2026

Description: Falcon Manufacturing is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economical manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add Industrial Maintenance Mechanic to our Team. Job Description: Maintain production and quality for precision sheet metal fabricator facility by ensuring operation of machinery and mechanical equipment. This requires working with others in the company including department supervisors and purchasing. Requirements: Responsibilities: Preventive maintenance of machinery and mechanical equipment: press brakes, spot welders, lasers, NC turret presses, and production machines following dia

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Centri Business Consulting provides the highest qualityadvisory consulting servicesto its clients by being reliable and responsive to their needs. Centri provides companies with the expertise they need to meet their reporting demands. Centri specializes infinancial reporting,internal controls,technical accounting research,valuation,mergers & acquisitions, andtax,CFOandHR advisoryservices for companies of various sizes andindustries. Fromcomplex technical accounting transactionsto monthlyfinancial reporting, ourprofessionalscan offer any organization the specialized expertise and multilayered skillsets to ensure the project is completed timely and accurately. We are One Firm, One Team, and One Culture. It's how we do things at Centri. And a large part of our focus is on becoming the best, m

Maple Shade, NJ • (32.9 miles) • Full Time • 10/26/2026

Reefer Mechanic: Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we have grown to 10 locations expanding to 4 states on the east coast, offering commercial truck sales, commercial truck rentals, full-service leasing, contract maintenance, parts, and service. We continue to work every day towards our philosophy of being Committed to Excellence. If you have passion and are committed to success, we want you on our Team! Benefits: Sick/PTO Paid Holidays Competitive Wage Generous 401k match. Medical, Dental, Vision Employee Referral Bonus Quarterly Tool Allowance Company Paid Life Insurance Supplemental Life, LTD, STD, etc The Refrigeration Mechanic is responsible for advanced diagnostics, major component rebuilds, and

Cherry Hill, NJ 08034 • (33.4 miles) • Full Time • 10/26/2026

Description: Responsibilities: We are looking for a talented engineer with the ability to develop electrical drawings and specifications. The successful candidate will work with a team of designers and engineers to develop electrical design concepts; review drawings and documents to assure compliance with company design and production standards and ensure the highest level of quality to assure documents reflect design intent of project scope. Must have experience with solar energy, power distribution systems, electrical schematics and controls, lighting, grounding, communication, fire and security systems, NEC and building codes, cost estimating and construction administration tasks. Qualifications: · Bachelor Degree (BS) in Electrical Engineering · PE license or EIT, with a minimum of 5 y

Princeton, NJ • (31.2 miles) • Full Time • 10/26/2026

The Senior Validation Manager is leading the site validation program and all qualification and validation activities at the Erytech, Princeton site, NJ. Validation activities include Facility/Clean rooms, manufacturing equipment, laboratory instrument, computer system, cleaning, and manufacturing processes in an aseptic environment. In this role, you will define, implement and maintain the validation program for the site, ensuring compliance to the company quality guideline, FDA regulatory requirements, and cGMP regulations. RESPONSIBILITIES The ideal candidate will have strong understanding of risk-based approach to validation, related to aseptic process and environmental control and extended experience with risk assessment including FMEA and AMDEC. Lead all validation activities in a han

Riverton, NJ 08077 • (33 miles) • Full Time • 10/26/2026

Description: Job Purpose: Performs work in the painting, finishing, and maintaining of a wide variety of interior and exterior surfaces and structures; may direct the work of other staff in the area; and perform related work as required. The Painter prepares surfaces for painting and finishing; applies undercoats and finish coats using the full range of application methods and materials; mixes and matches paints and finishes; advises in the selection and storage of painting materials. Job Summary This position reports to the Paint Department Supervisor. The ideal candidate should have knowledge of paint equipment and different paint systems. Must be able to work with paint suit and mask. Duties : Accident prevention – actively identify, correct and/or report safety hazards to prevent accid

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Proconex is the exclusiveEmerson Impact Partnerfor Emerson Automation Solutions in the Mid-Atlantic region. Weprovide a full portfolio of Process Automation Control Systems, Valves and Control Devices, and related technologies and services to a range of customersin the Life Sciences, Chemical, Power, Refining, Oil & Gas, Food & Beverage, Paper, Metals, and other industries, as well as commercial enterprises and campus facilities.With three strategically located offices, Proconex maintains a deep dedication to its 200+ employees, a sharp focus on safety and quality, and the drive to deliver. Systems Engineer – Emerson DeltaV Proconex is seeking a Systems Engineer with Emerson DeltaV experience to provide day-to-day support for automation systems within a pharmaceutical manufacturing environ

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Printfresh is looking for a highly skilled illustrator and textile designer to create original prints and embroideries for our Sleepwear and Apparel collections. Our print artwork is at the heart of our brand, rich in detail, full of personality, and often a little unexpected. In this hands-on creative role, you’ll develop artwork from initial concepts and sketches through finished, production-ready designs. You’ll bring imaginative storytelling, a strong sense of color, and thoughtful attention to detail to seasonal collections and collaborations. Working closely with our Creative Leadership, Design, Merchandising and Product Development teams, you’ll balance artistic exploration with commercial needs and production deadlines. This is a full-time position, working in our Philadelphia offi

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Bentley Truck Services, Inc. has been family owned and operated since 1991. Starting as a small 2 bay shop in Philadelphia, we now span the entire eastern seaboard with 11 state of the art locations offering commercial truck sales, commercial truck rentals, full-service leasing, contract maintenance, parts, and service. We strive to create an uplifting and welcoming environment for our 200+ employees and customers. We continue to work every day towards our philosophy of being Committed to Excellence. If you have passion and are committed to success, we want you on our Team! Benefits: Competitive pay Paid Time Off (PTO)/Sick Time Paid Holidays Generous 401k match. Medical, Dental, Vision Employee Referral Bonus Company Paid Life Insurance Supplemental Life, LTD, STD, Critical Illness, and A

Philadelphia, PA • (40.3 miles) • Full Time • 10/26/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority inte

Piscataway, NJ • (40.5 miles) • Full Time • 10/26/2026

About GenScript Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop groundbreaking treatments and products. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions. The position reports to the Director of US Molecular Biology R&D at the Piscataway site of the GenScript Gene R&D department. Responsibilities: Develop new automation workflows to meet the high throughput biomanufacturing needs. Maintain and upgrade existing automation methods.

Philadelphia, PA 19122 • (40.9 miles) • Full Time • 10/26/2026

Description: Starting Salary: $56,650.00 Job Status: Full Time, Exempt Work Schedule: Monday through Friday from 8:30 am to 5 pm Department: Quality Assurance Location: 1900 N 9th Street, Philadelphia, PA 19122 ABOUT APM Asociacin Puertorriqueos en Marcha (APM) is a nonprofit organization in Philadelphia, PA providing human services to the community including early childhood education, foster care & adoption, child welfare, mental & behavioral health, community and economic development, housing, violence intervention, and services to community schools. APM has been servicing the North Philadelphia community since 1970. JOB SUMMARY The Compliance Specialist is responsible for ensuring that the Child, Youth and Family Service program is adhering to established performance and quality standar

Monroeville, NJ 08831 • (25.3 miles) • Full Time • 10/25/2026

Architectural millwork and casework manufacturer in Central New Jersey is looking for dedicated energetic people for Entry Level Drafts person to: Create cabinet and millwork shop drawings from architectural plans Prepare sink and color schedules Revise shop drawings Prepare documents for production, and Produce estimates for clients from Architectural plans. Must be proficient with AutoCAD and familiar with MS Word, Excel, and Outlook.

Tinton Falls, NJ • (25.8 miles) • Full Time • $24.00 to $26.00 / hr • 10/25/2026

When childhood friends Holly and Shawn stepped away from their corporate careers and started Rook Coffee in 2010, they wanted to make people feel special. Since the beginning, in a 300-square-foot shack, Rook has focused on offering specialty coffees that inspire genuine, human connections. Rook Coffee is currently seeking energetic and hard-working individuals to continue to make those connections. If you’re nice, likable, approachable, a team player, proactive, patient, sociable, positive, reliable, and honest, we’d love to hear from you. Overview Our Cold Brew Team Lead works directly with the Production Manager to help manage the cold brew production floor and keep this growing business organized and operating efficiently. This entry-level position is a great opportunity to learn the i

Grenloch, NJ • (38.3 miles) • Part Time • $17.00 to $25.00 / hr • 10/25/2026

Our company is growing and we pride ourselves on working with quality painting teams! If you are looking for a painting or power washer job, and interested in working with us, please complete the application. Pay based on years of painting experience. Spackle and paint experience a plus, but entry level applicants will be considered. Own transportation is ideal, but we will consider applicants who are able to meet at the workshop and ride together This position is part time to start, leading to full time The candidate must be physically capable of performing the duties of the job, which includes performing repetitive movements, standing for long periods, lifting heavy objects, climbing stairs and stairs, etc. RESPONSIBILITIES • Arrive on time for all scheduled work days Understands and exe

Philadelphia, PA 19112 • (42.5 miles) • Full Time • 10/25/2026

The QCM/SSHO shall be responsible for field execution of assigned projects in the Philadelphia Navy Yard ( NAVFAC ), including site management, onsite construction operations and oversight of all work being installed for the duration of the Contract. Must have in-depth knowledge and experience as a general contractor for construction including pre-construction planning, scheduling, safety, quality control, equipment and workforce supervision. Must have the ability to lead and problem solve while working with all CSI trade divisions. Responsibilities: Coordinate daily with Construction Project Manager Maintain and assist with updating project schedule and three week lookahead Coordinate subcontractors and support staff to accomplish onsite tasks Complete daily reporting requirements and cat

Cranbury, NJ • (25.1 miles) • Full Time • $200000.00 to $275000.00 / hr • 10/25/2026

Job Title: Principal Engineer, Electrical Engineering Location : Cranbury, NJ Division: Photonics Department : Optogration, Inc. About Us: Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company’s portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications. Position Description: QCi is seeking a seasoned Electrical Engineer to join a team that develops and produces world class semiconductor-based detector products for a range of applications, incl

Monroe Township, NJ • (25.3 miles) • Full Time • 10/25/2026

Description The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM KEY RESPONSIBILITIES Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carrie

Bristol, PA 19007 • (27.5 miles) • Full Time • $23.00 / hr • 10/25/2026

Benefits: Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance NOW HIRING: INDUSTRIAL PAINTER Global Affinity Inc., a leading OEM manufacturer of waste and recycling equipment, is currently seeking a skilled Industrial Painter to join our growing team in Bristol, PA . Position Overview As an Industrial Painter, you will be responsible for applying industrial coatings to large equipment inside our 25-foot and 40-foot paint booths . This role is crucial in ensuring our products meet high standards of durability and finish quality. Key Responsibilities: Apply industrial coatings to large-scale metal equipment. Operate spray guns and other painting tools in enclosed paint booth environments. Perform surface preparation, including sanding, masking, and cl

Edison, NJ 08837 • (38 miles) • Full Time • $100,000 / yr • 10/25/2026

Controls Engineer Reports To The controls engineer reports to the chief engineer. Job Overview The controls engineer supports the maintenance department by leading preventative maintenance, improvements, and repairs in automation systems and electrical controls while also assisting with department management. Responsibilities and Duties Maintain automation systems including PLC’s, HMI’s, inverters, servos, robotics, network components, and computers. Troubleshooting of all controls issues as well as assisting maintenance in troubleshooting other issues using PLC’s. Make changes to controls programs as needed to improve the system or to fix issues. Assist in the startup of new equipment, including IP addressing, acquiring all programs, and verifying the ability to connect and manage the new

Somerset, NJ • (38.1 miles) • Full Time • $70,000 to $104,000 / yr • 10/25/2026

INJECTION MOLDING TECHNICIAN We are seeking an experienced Injection Molding Technician with a strong background in plastic injection molds, machining, mold repair, and modification . This is an excellent opportunity with an established company offering excellent benefits, long-term stability, and an opportunity for a career through retirement . Key Responsibilities & Qualifications Hands-on experience with plastic injection molding machines Experience repairing, adjusting, modifying, and designing injection molds Strong background in injection mold making and maintenance Ability to troubleshoot and repair plastic injection molds General machine shop experience , including milling and related machining equipment CNC machining experience strongly preferred Manual machining experience desire

Edison, NJ • (39.4 miles) • Full Time • $120,000 to $158,000 / yr • 10/25/2026

Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear w

Mays Landing, NJ 08330 • (40.1 miles) • Full Time • $34.00 to $38.00 / hr • 10/25/2026

Job Overview We are seeking a skilled and detail-oriented CAD Designer to join our dynamic team. The ideal candidate will have a passion for creating precise and innovative designs. As a CAD Designer, you will be responsible for developing detailed schematics and system designs using various CAD software tools. Your expertise will contribute to the successful execution of projects in the marine industry design. Duties Create detailed 2D and 3D models using RHINO 3D & SOLID WORKS to include surface modeling and Mesh modeling Develop and maintain accurate drafting documentation, including assembly drawings and schematics. Collaborate with engineers to ensure proper design. Apply Geometric Dimensioning & Tolerancing (GD&T) principles Engage in technical writing to produce clear documentation

Philadelphia, PA • (40.3 miles) • Full Time • 10/25/2026

Join very busy Central City Toyota Collision Center as an Auto Body Assembler/Disassembler in Philadelphia, PA, where you'll play a crucial role in assembling and disassembling vehicle body components to ensure top-quality repairs. Responsibilities Assemble and disassemble vehicle body parts, including frames, doors, fenders, bumpers, and other components. Follow detailed instructions and safety protocols to maintain quality standards. Inspect parts for damage or defects and report any issues to the supervisor. Operate hand and power tools safely and efficiently. Collaborate with the team to meet production deadlines and maintain shop organization. Requirements Previous experience in auto body assembly or disassembly is preferred. Ability to use hand and power tools safely. Strong attentio

Philadelphia, PA • (40.3 miles) • Full Time • $60,000 to $63,000 / yr • 10/25/2026

Job Description: The Special Programs/Test Site QA Support provides support to the installation, construction and operation at NSWCPD facilities, laboratories, and test sites. Quality Support is provided via: Surveillances, Critiques and Audits. New and/or modified constructions associated with Test Sites and Laboratories coordinates with Code 00Q's Test Site QA group for quality oversight. Test Site QA works in conjunction with proper NSWCPD personnel to apply welding and NDT reviews and enforce standardized welding and NDT requirements for NSWCPD Test Sites. QA Support includes providing the following: Support QA oversight of new and/or modified test sites, facilities, and/or laboratories. Assist with the development and recommendation of procedures and work instructions. Perform inspect

Philadelphia, PA • (40.3 miles) • Full Time • 10/25/2026

About Burns: Burns Engineering provides professional engineering design and project management services for transportation, facilities, and infrastructure projects. We help our clients attain their strategic goals and initiatives through successful large-scale infrastructure projects. Burns' full-service capabilities include mechanical, electrical, civil, structural, transportation, and energy consulting engineering. Recently voted a Top Workplace by Philly.com, we credit our strength as an organization to our talented, driven, vibrant team. Burns is an ENR Top 500 Firm, and has been named an MEP Giant by Consulting-Specifying Engineer Magazine, as well as a Hot Firm by Zweig. We are industry experts, proven leaders, innovative thinkers, and team players. We put our clients' successes and