Brenham, TX 77833 • (31.5 miles) • Full Time • 10/8/2026

Position Overview:The Process Engineer applies industrial and manufacturing engineering principles to improve throughput, capacity, reliability, labor utilization, and overall operating performance across QuestSpecialty’s aerosol manufacturing operations. The position analyzes production data, equipment performance, workflows, layouts, labor, and operating methods to identify constraints and implement practical improvements.Essential Duties and Responsibilities:Analyze production performance, OEE, downtime, cycle times, changeovers, labor utilization, and production attainment to identify opportunities for improvemenEvaluate line balance, bottlenecks, equipment utilization, capacity, material flow, and plant layouts to increase productive output.Develop and improve standard work, productio

Spring, TX 77380 • (39.4 miles) • Full Time • 10/8/2026

HYBRID ONSITE TUESDAY, WED, THURSDAY!JOB DESCRIPTIONAn O&G client in The Woodlands, TX is looking for an Automation & Controls Engineer to join their Operations team. This role will be an ongoing contract role extended on an annual basis. This role will work a hybrid (Tues-Thurs in office, Mon & Fri remote) 9/80 schedule (every other Friday off). This role is seeking an experienced Automation and Controls Engineer to support the installation, configuration, maintenance, and troubleshooting of automation, control, and OT network systems supporting offshore oil and gas operations. They will provide expertise in troubleshooting, and lifecycle support for PLCs, HMIs, instrumentation, networks, virtualized servers, and Windows systems. They will use engineering documents to validate control log

Magnolia, TX • (24.1 miles) • Full Time • 10/7/2026

Job Description:CAD drafters are responsible for transforming construction document designs using cad programs to develop accurate models and working drawings for design approval, shop fabrication, and field erection.Duties:· review and analyze project drawings and specifications· develop 3d cad models based on project data· generate accurate working drawings for design approval, shop fabrication, and field erection· provide timely technichal assistance to the project team· excercise good judgment in interpreting construction documents based on design intent· understand and implement best practice procedures into plans· communicate design conflicts in written form· know and implement local and international safety codes (ada, ibc, tas, aisc, osha)· visit construction sites to pull field di

Bryan, TX • (25.6 miles) • Full Time • 10/7/2026

Last Energy is seeking a hands-on Instrumentation & Controls Engineer to support the integration, deployment, and lifecycle management of industrial instrumentation, electrical, and control systems. In this role, you will serve as a technical integrator and field-oriented engineer, ensuring automation and control systems are correctly specified, installed, commissioned, and operated within a safety-critical nuclear environment. This position is ideal for an engineer who thrives at the boundary between design intent and real-world execution working closely with vendors, fabricators, technicians, and operations to translate requirements into reliable, field-ready systems. Key Duties & Responsibilities Control System Specification: Define functional requirements and performance expectations

Conroe, TX 77385 • (39.6 miles) • Full Time • 10/7/2026

Hospitality Task Force EngineerIntroductionWelcome to Thind Management, a family-owned management company where we strive to provide exceptional service and unforgettable experiences to our guests at our properties. With a passion for hospitality and a commitment to teach, we at Thind Management strive to share our knowledge with team members to reach new heights. We live and breathe the Thind motto “We’ll Take It from Here”. Our team of experienced leaders are dedicated to delivering the highest standards of training, providing tools, and ensuring professional growth of our team members.Job SummaryWe are seeking a highly skilled and hands-on Hospitality Task Force Engineer with a strong leadership presence and the ability to stabilize operations quickly. One who is responsible for deployi

Houston, TX 77070 • (43.1 miles) • Full Time • 10/7/2026

Senior Controls System EngineerJob Type: Full Time, On-SiteWho We Are:Southern Integrated Solutions and Consulting is a forward-thinking systems integration company offering an extensive range of services, products, and customized systems in sectors such as oil & gas, utilities, manufacturing, and mining. Our team composed of seasoned Electrical and Control Systems Engineers, Consultants, Project Managers, System Integrators, and I&E Technicians excel in Automation, SCADA, I&E Construction, Process Control, Safety Instrumented System Design, Safety Integrity Level Selection & Verification, Safety Lifecycle Modeling, Real-Time Data Collection, MCC & Switchgear Design, and Fabrication.Job Description:Southern Integrated Solutions and Consulting (SISC) is searching for an experienced automati

Houston, TX 77070 • (43.1 miles) • Full Time • 10/7/2026

Description: About us:ARCXIS, headquartered in Houston, Texas, is the nation's number one engineering and inspections firm, touching 1 in every 7 new homes, and operating in over 28 states. Committed to innovation and excellence, our services help to build better quality homes, more quickly, at lower cost, and with less risk. Formerly known as DPIS Builder Services, Ei Companies, Post-Tension Solutions, Ensign Building Solutions Home Energy Division, and Building Energy, ARCXIS unites extensive expertise into a single brand, offering nationwide coverage with a local touch. Our portfolio includes ABCO Construction Services, LLC, United Structural Consultants, and iPermit, amplifying our reach into the multi-family, multi-use, commercial, and pre-existing residential sectors. ARCXIS is major

Conroe, TX • (32.3 miles) • Full Time • 10/6/2026

Location: Conroe, TXSchedule: Monday - Friday, 7:00 a.m. - 4:00 p.m. (minimal overtime)Employment Type: TTHJob Summary:Agency 8 is partnering with a well-established control panel design and fabrication company to hire an Electrical Designer (AutoCAD Electrical). This role will support the design and documentation of control panels, ensuring accuracy, efficiency, and compliance with both customer specifications and industry standards.The ideal candidate brings hands-on experience with AutoCAD Electrical and a strong understanding of electrical controls and panel design. This is a great opportunity to join a collaborative team with exposure to diverse projects and long-term growth potential.Key ResponsibilitiesCreate detailed electrical schematics, wiring diagrams, and panel layouts using A

Spring, TX 77379 • (41.2 miles) • Full Time • 10/6/2026

This position is central to how our projects get built right the first time. While the majority of our jobs already have an Architect developing the plans, there is often a gap between what is drawn and the level of detail our team requires for accurate estimating and construction. In this position, you’ll take finalized architectural plans and fill in pages and details with what’s missing so no assumptions have to be made by our Estimating or Construction crews. Since you’ll also sit in on design meetings with clients, you will need to be comfortable engaging clients and behind a computer. Additionally, the person filling this position will need to be a utility player, willing to do lots of different tasks outside of what's described above. You'll support our selections department to help

Houston, TX 77070 • (43.1 miles) • Full Time • 10/6/2026

Company Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 24locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to

The Woodlands, TX • (35.7 miles) • Full Time • 10/5/2026

Description: Mentor small team of engineers and CAD designers in General/Physical Layout as well as Protection & Control packages of substation design projects. Candidate will be the sealing engineer for the majority of work produced by the team and will also act to manage customer relations and well as business development with select clients. This position reports to the Divisional Manager.This position will be at the Texas Office, which will be located at the Woodlands area.Requirements: Mentor and schedule work of junior engineers, designers, CAD operators on candidate’s assigned team.Capability to be Customer’s Point of Contact to manage existing projects and customer satisfaction, as well as future business and upcoming project plansProficient in multiple areas of substation engineer

College Station, TX 77843 • (22.7 miles) • Full Time • 10/5/2026

Ghosted After Applying: Candidates Tired of SilenceGhosting Is Now the Default. It Does Not Have to Be Your Default. You apply, sometimes complete a HackerRank, and then nothing. No rejection, no recruiter, no feedback. Data engineer roles are competitive, and companies ghost candidates who look generic: some SQL, some Python, no pipeline narrative, no cloud, no Spark. Silence is a market signal that your profile is not being championed. Make Your Profile Impossible to Ignore JOPP covers the pieces interviews actually poke: SQL performance, Python, Spark, Databricks/Snowflake, streaming concepts, and cloud ETL patterns. You complete pipeline projects with clear architecture. Resume work makes those projects scannable. Interview prep stops you from blanking on "walk me through a pipeline yo

Bryan, TX 77807 • (32 miles) • Full Time • 10/5/2026

Licensed Professional Engineer – Utility InfrastructureLocation: Austin, TX/Central Texas Area (Hybrid)Job Type: Full-Time, ExemptReports To: Chief Operations OfficerOverviewLegion Engineering, LLC. is seeking a Licensed Professional Engineer (PE) to help lead the delivery of utility infrastructure projects while playing a strategic role in the company’s continued growth. This position blends core engineering responsibilitiessuch as technical review, permitting, and compliancewith cross-functional leadership, jurisdictional coordination, and involvement in federally funded programs. The ideal candidate brings a combination of engineering depth, systems-level thinking, and the ability to work fluidly across teams, agencies, and client needs. As Legion scales, this role offers the opportunit

Spring, TX 77380 • (39.4 miles) • Full Time • 10/5/2026

M&S Engineering is seeking an experienced, licensed Civil Project Engineer (P.E.) to lead and stamp engineering deliverables for horizontal directional drilling (HDD) and directional boring projects. Our current project portfolio includes crossings beneath USACE-regulated levees and flood risk management (FRM) structures, freshwater delivery canals, TxDOT highways, waterways, and railroad corridors. This role demands hands-on expertise in USACE Section 408 permitting, hydraulic fracture analysis, and HDD bore path design and general civil or utility infrastructure experience. The PE of Record will also carry a formal mentorship responsibility for junior engineering staff working toward their own PE licensure.ResponsibilitiesDesign & Technical LeadershipServe as PE of Record lead design, st

Spring, TX 77380 • (39.4 miles) • Full Time • 10/5/2026

QualificationsExperience:Civil engineering / land development, 3 years (required)Passed P.E. ExamCompany Bio:MHESis a well-established engineering firm founded in 2002in Boerne, Texas. MHESprovides civil engineering design, land surveying anddevelopmentservices for commercial, residential,andgovernmentaldevelopments.From its conception, Matkin Hoover’s entrepreneurial vision has been to provide quality engineering and surveying services to clients with the personal involvement of a small business. Today, MHES has developed and grown into a full service, professional civil engineering & surveying firmsupported by a strong force of experienced and dedicated licensed professional engineers, engineers-in-training, surveyors, CAD technicians, and administrative staffserving clients globally.Typ

Spring, TX 77381 • (36.1 miles) • Full Time • 10/3/2026

Do you want the opportunity to build innovative software, solve real-world challenges, and make a visible impact on products used by thousands of businesses every day? If you're a talented developer who enjoys collaborating with a close-knit team and creating technology that matters, Alliance HCM wants to meet you. Join us as a full-time Full Stack Software Engineer in The Woodlands, TX, and take your career to the next level. Apply today!As our Full Stack Software Engineer, you'll earn a competitive annual salary. We also offer a comprehensive benefits package, including:100% paid health, vision, dental, life, and LTD insurance401k with employer matchPersonal and professional developmentHelp build and shape a great tax teamEntrepreneurial cultureDirect exposure to leadership and high-impa

Conroe, TX 77303 • (37.2 miles) • Full Time • 10/3/2026

Position SummaryThe Welding Engineer is the technical authority for all welding operations at Ameritex. This position is responsible for developing world-class welding processes, ensuring compliance with applicable codes, improving productivity, reducing rework, qualifying personnel, and driving continuous improvement across all fabrication operations.This role works closely with Engineering, Production, Quality, Manufacturing Engineering, and Maintenance to ensure weldments consistently meet customer requirements while maximizing throughput, repeatability, and profitability.The successful candidate will combine strong technical expertise with hands-on manufacturing experience and a passion for improving welding performance throughout the organization.Minimum QualificationsCurrent AWS Cert

Spring, TX 77380 • (39.4 miles) • Full Time • 10/3/2026

Individual must be able to perform the following duties.Use of CAD software and ability to draft and post process survey data. AutoCAD & Trimble TBC preferred,ESRI ArcMap preferable.Produce finished survey deliverables including but not limited to base mapping, topographic.Develop construction stakeout upload files and hard sheets for survey crews.Process and produce post-construction and AsBuilt data and drawings.Provide and follow quality processes and procedures.Effectively communicate and provide support to internal & external stakeholders and team members.Assist with general office tasks, inventories, equipment shipping and other general support and administrative tasks.QualificationsPreferred Minimum of 3 years of Survey Drafter / Data Technician / CAD experience.Requires knowledge o

The Woodlands, TX • (35.7 miles) • Full Time • 10/3/2026

Mechanical Design Engineer – Drill Bit TechnologyLocation: The Woodlands, TXDuration: Long-Term Contract (12+ Month Project)Schedule: Approximately 40 hours/week (30+ hours considered)Work Arrangement: Onsite during onboarding/training, hybrid flexibility available afterwardAbout the OpportunityWe are seeking an experienced Mechanical Design Engineer to support the design, analysis, and development of advanced drill bit technologies for a high-profile engineering project. This role offers the opportunity to work alongside a collaborative and experienced team focused on improving product performance, implementing material design changes, and developing next-generation drilling solutions.The ideal candidate will have strong mechanical design expertise, hands-on 3D CAD modeling experience, an

Houston, TX 77095 • (44.7 miles) • Full Time • 10/3/2026

Controls EngineerHouston, TXAre you looking for a career where you will receive immediate on the job training working side by side with automation experts on a variety projects? Are you motivated to help local manufacturing industries achieve their energy efficiency and sustainable business practice objectives?Applied Control Engineering, Inc. (ACE) provides automation solutions to a diverse set of industries, including chemicals, pharmaceuticals, industrial gases, discrete manufactured products, and more. Engineers at ACE have become industry leading technical experts, project managers, sales engineers, or engineering managers.ACE is seeking entry level, passionate engineers to join our team.JOB OVERVIEWAs a new engineer at ACE, you will join a project team that is delivering a customer p

Houston, TX 77070 • (43.1 miles) • Full Time • 10/2/2026

Civil CAD Drafter / TechnicianWe are seeking an experienced Civil CAD Drafter/Technician with a minimum of five (5) years of professional experience supporting civil engineering, land development, and infrastructure projects. The ideal candidate will have strong proficiency in AutoCAD Civil 3D and the ability to efficiently produce accurate, detailed, construction-ready drawings while working closely with engineers, project managers, surveyors, and other members of the design team.This position will support a wide variety of residential, commercial, municipal, industrial, and infrastructure projects throughout Midland, West Texas, and other Texas markets.Responsibilities:The Civil CAD Drafter/Technician will assist engineers and project managers with the preparation, development, and coord

Houston, TX 77069 • (44.4 miles) • Full Time • 10/2/2026

Requirements: Experience in an electronic manufacturing environment specifically wire and cable manufacturing. Experience with IPC620, ISO9000, AS9100 and applicable quality standards. Experience with complex harness test processes including automated testers such as CAMI Eagle Eye equipment with up to 1024 test points. Must be able to program machinery, verify test processes/capabilities including diode and power resistor testing.Experience in quality management including quality system compliance is required. Process quality check definition and implementation on an as needed basis required in a high mix, low volume cable and harness shop.This position can be hourly or salaried depending on candidate preference and experience. Some employee management is required in the position to ensur

Magnolia, TX 77354 • (27.8 miles) • Full Time • 10/2/2026

EHC is seeking anElectrical Engineer for a Client in the Magnolia AreaLocation: Magnolia, TX (Hybrid)Position Overview An established architecture, engineering, and construction organization is seeking a motivated, self-driven Electrical Engineer to join its growing team. This role offers the opportunity to contribute to projects from initial design through construction completion, providing exposure to both engineering design and construction operations. The position offers long-term career growth and professional development opportunities.Key Responsibilities Produce construction documents and electrical design deliverables for infrastructure and building projects.Manage design projects, ensuring quality control and adherence to project schedules.Participate in construction administratio

Conroe, TX • (32.3 miles) • Full Time • 10/2/2026

About Us:Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, data center, environmental, food & beverage, pulp & paper, material handling, oil & gas, pharmaceutical, renewables, metals, and utility markets. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery.Since 1957, we have been know

Waller, TX • (29.6 miles) • Full Time • 10/1/2026

Manufacturing Engineer | Cypress, TXJOB SUMMARYWe are seeking a motivated and hardworking individual to join our team in Cypress, TX as a Manufacturing Engineer - Electromechanical Assembly. You will be part of a group of engineers dedicated to high-quality work, value-add solutions, skill development, and career growth. We welcome candidates from the Houston, TX area and beyond to apply.Employees working in Cypress, TX have a short commute from Houston, Katy, Tomball, Spring, The Woodlands, Jersey Village, Hockley, Waller, and Magnolia. Our physical offices are located in Minnesota, Wisconsin, North Dakota and South Dakota.As aManufacturing Engineerin Cypress, TX, you will:Support the transition of electromechanical product lines from another facility into the Houston siteAssist with equi

Brenham, TX 77833 • (31.5 miles) • Full Time • 10/1/2026

Description: The Senior Electrical Engineer will oversee the design, development, and support of complex electronic power systems for the defense/aerospace industry. Candidates must have thorough, hands-on experience with power supplies, analog electronics, and product packaging for harsh environments.Work with cross-functional teams on new product development and R&D activities.Review applicable military and industry requirements, specifications, and standards as design inputs to prepare electrical circuit schematics for power converters, filters, and logic circuits.Design transformers and inductors.Complete printed wiring board placements and routing.Select parts per requirements, working from a wide variety of electro-mechanical component experience.Prepare engineering analyses like ele

College Station, TX 77845 • (17.8 miles) • Full Time • 9/30/2026

Ardurra is seeking a Public Works Engineering Intern to join our team in College Station, TX.Primary Function:Ardurra is seeking a Public Works Engineering Intern to join our team for the summer 2027. As a Public Works Engineering Intern, you will support engineering assignments that contribute to the planning, design, and construction of public works. This internship is designed to give you exposure to real world engineering work, build your technical skills, and help you explore a future career in the public works engineering industry.Primary Duties:Assists with preparing basic plan details, drawings, and calculations under the guidance of project engineers.Supports the development of technical specifications and project documentation.Drafts sections of technical reports or memorandums w

Willis, TX 77378-3418 • (30.4 miles) • Full Time • 9/30/2026

Description: Job DescriptionMechanical Engineer – Hydronic SystemsFair Labor Standards Act (FLSA): (Exempt/Non-Exempt): ExemptAbout Us: PurgeRite, the leader in high-quality mechanical flushing services, is seeking highly motivated and experienced engineers. We serve all sizes of commercial mechanical companies across the U.S. with end user clients that include many top Fortune 100 companies. Projects include data centers, semiconductor and EV battery manufacturers, universities, health care facilities, and district energy systems.We are a first-mover company seeking an individual that works with a sense of urgency, provides excellent customer service, and can independently drive multiple projects. This position will design engineered solutions for commissioning or remediating customer pro

Conroe, TX • (32.3 miles) • Full Time • 9/30/2026

We are seeking a highly skilled and detail-oriented Commissioning Engineer to join our team. As a Commissioning Engineer, you will play a crucial role in ensuring the successful installation, startup, and testing of mechanical, electrical, plumbing, and control systems for complex projects. This is an exciting opportunity to be involved in all stages of capital construction project delivery and ensure that all systems meet the required specifications, quality standards, and safety regulations. Key Responsibilities: Oversee and execute the commissioning process of MEP and control systems for projects.Conduct thorough inspections, testing, and troubleshooting of equipment and systems to ensure they meet design specifications.Develop and implement detailed commissioning plans, including test

Spring, TX 77380 • (39.4 miles) • Full Time • 9/29/2026

Project Engineer - Gulf CoastThe Woodlands, TX Description Bauer Foundation Corp. (BFC) is a Florida corporation and the U.S. subsidiary of the world-wide operating Bauer Group based in Schrobenhausen, Germany. The Bauer Group is a world-renowned foundation contractor, designer, and builder of the world’s finest foundation equipment.BFC, as part of the Bauer construction division, is a leader in the execution of complex excavation pits, ground improvement, deep foundations, and vertical seals, utilizing the most up to date equipment and installation techniques. Bauer Foundation Corp. provides all types of foundation solutions and services for industrial, commercial, residential, and governmental construction projects. Bauer Foundation Corp. promotes Bauer services and technology throughou

Hockley, TX 77447 • (31.6 miles) • Full Time • 9/28/2026

Benefits:Competitive salaryPosition Overview We are seeking an experienced Senior Electrical & Systems Integration Engineer to lead the design, integration, and commissioning of complex control and electrical systems. This role is critical in delivering reliable, secure, and high-performance solutions across mission-critical environments, including data centers and industrial facilities. The ideal candidate brings strong technical expertise, hands-on field experience, and the ability to lead projects from concept through execution Key ResponsibilitiesCore Technical ResponsibilitiesDesign, install, and commission low-voltage control systemsIntegrate multi-vendor hardware and software platformsDevelop control logic, automation sequences, and system workflowsTroubleshoot and resolve complex e

Madisonville, TX 77864 • (33.2 miles) • Full Time • 9/27/2026

Title: Production and Facilities EngineerLocation: Texas (with occasional travel to ND, East Texas, and West Texas)Employment Type: Full-timeSummary:We seek a Production and Facilities Engineer to support our field operations in Texas, with potential travel to North Dakota, East Texas, and West Texas after the 90-day probation period. This role is critical in ensuring our oil and gas production facilities' efficiency, safety, and compliance. The ideal candidate will spend 50-75% of their time in the field, depending on asset needs, and will be responsible for operating, maintaining, and optimizing production equipment and facilities.Field Operations:Monitor and optimize daily oil and gas production.Operate, troubleshoot, and maintain production equipment, including separators, compressors,

Spring, TX 77380 • (39.4 miles) • Full Time • 9/27/2026

Description: About Arena OffshoreArena Offshore is a leader in offshore energy production, dedicated to operational excellence, safety, and environmental responsibility. Our collaborative and innovative team drives impactful projects that power the future. Join us to advance your career in a dynamic, safety-first environment with opportunities for growth and professional development.Position OverviewThe Facilities Engineer provides engineering and technical expertise to support Arena Offshore’s assets, including maintenance, optimization, and capital projects for offshore production facilities. This role ensures compliance with industry regulations, Arena Offshore’s safety and quality standards, and project management objectives while driving operational efficiency.Key Responsibilities:· A

Conroe, TX 77301 • (35.4 miles) • Full Time • 9/26/2026

JOB SUMMARYThe Engineering Technician is responsible for performing para-professional technical engineering-related work to assist engineering staff with reviewing and preparing plans, investigations, and data collection for engineering projects. Prepares computer aided drafting (CAD) drawings. Helps ensure compliance in accordance with plans and specifications including City Subdivisions Ordinance and the legally established construction standards, enforcement codes and requirements for civil engineering projects.QUALIFICATIONSEducation and Experience:Associate's degree in engineering, drafting, construction management or related field, and four years of related experience with a municipality, public entity, or a consulting civil engineering firm; or equivalent combination of education an

Bryan, TX 77803 • (27.1 miles) • Full Time • 9/26/2026

The design lead oversees the design team in successfully planning, executing, and delivering primarily large-scale projects.Responsibilities include:• Act as the primary design engineer of record and project lead for projects congruent with experience.• Provide regularly scheduled project reviews to review design progress, schedule, outstanding issues, etc. toprovide guidance and support to design staff.• Sign and seal plan sets as appropriate for level of involvement in the project.• Create or direct schematic design layouts and establish initial design direction.• Plan out project tasks, priorities, timelines, and delegate tasks to project engineers and designers.• Perform QA/QC of delegated tasks.• Provide technical support and develop expertise of project engineers as necessary.• Commu

Spring, TX 77380 • (39.4 miles) • Full Time • 9/25/2026

Description: C&I Engineering is looking for a talented and driven individual to join our team!About the opportunity: Senior Electrical Power EngineerWe are currently seeking a full-time SeniorElectrical Power Engineer in our office to help us achieve our company mission. C&I is a full-service engineering design firm providing engineering/design/project management and procurement services to various clients in oil & gas, food & beverage, and distilled spirits.Responsibilities include:Prepares complete design packages, including construction scope of work, for complex projects that meet design intents and customer expectations. Designs are well coordinated with other departments.Creates lists of engineering deliverables and tasks, and estimates effort hours for same, based on limited scopes

Houston, TX 77070 • (43.1 miles) • Full Time • 9/24/2026

DESCRIPTION: (Including but not limited to)The Entry-Level Repair Engineer is an early-career engineering position designed to develop technical expertise within APG's gas turbine repair operations. Engineers will be assigned to a specific product or repair area based on business needs. Working alongside experienced Repair Engineers, Technical Representatives, Operations, and Quality personnel, the engineer will build a practical understanding of gas turbine component repair processes. In this role, the engineer will also contribute to engineering support, process improvement initiatives, and technical projects.KEY FUNCTIONSDevelop technical knowledge of assigned gas turbine components, repair processes, and applicable engineering requirements.Support experienced engineers with day-to-day

Bryan, TX 77808-8658 • (25.6 miles) • Full Time • 9/24/2026

Second Generation Arc N Spark Welding is looking for a highly talented mechanical design drafter with high experience in Autodesk Inventor to join our dynamic team! We're seeking a hardworking professional who likes meeting challenges and surpassing client expectations.To excel in this role, you should have high personal and professional ethics, and have a professional demeanor at work. A team player, who is able and willing to follow instructions. Follow through on accomplishing assigned responsibilities on schedule with minimum supervision. The successful candidate will also have a steady hand and outstanding attention to detail. A self-starter with the ability to think through and solve complex problems using their own initiative, but not afraid to seek help when required.Duties of the

Bryan, TX • (25.6 miles) • Full Time • 9/24/2026

DescriptionBe apart of an Industry leader in the design and manufacturing of engineered polymer and elastomer solution. Utilizing the most advanced material compounds, manufacturing processes, and engineering expertise to develop shapes, sealing systems, and components to satisfy even the most complex applications. Focusing on several service markets, such as the Space Industry, Oil & Gas, Nuclear, Chemical Processing, Power Generation, and Semiconductor.We are seeking a highly motivated and skilled CNC Programmer Machinist to join our team. This individual will be responsible for programing and operating CNC machines, improving processes, inspecting parts, and contributing to a lean and collaborative manufacturing environment. If you are passionate about machining, eager to grow, and thri

Conroe, TX 77385 • (39.6 miles) • Full Time • 9/24/2026

Prefab Engineering InternSummer Internship ProgramDepartment: 5K Power / 5K Specialty Systems (Prefabrication)Reports To: Prefab Operations ManagerLocation: Houston, TX, with potential travel to project sites across TexasEmployment Type: Paid Summer Intern (10–12 Weeks) With over 18 years of experience, Hays Electrical Services is a nationally recognized electrical contractor delivering high-quality, safe, and reliable electrical solutions across commercial, industrial, and specialty markets. Licensed in multiple states and trusted by leading general contractors, Hays is built on a foundation of safety, excellence, drive, communication, and client focus. Our Summer Internship Program gives students hands-on exposure to real projects, a dedicated mentor and supervisor, and the chance to bui

Cypress, TX 77429 • (39.6 miles) • Full Time • 9/24/2026

Job Title:Senior Electrical EngineerJob Description: Trystar is a leader in power distribution, conditioning equipment, and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar’s team members are our most important asset. We are seeking a Senior Electrical Engineer who will play an instrumental role in contributing to our Electrical Engineering design team. We aim to exceed customer expectations, achieve strategic and aspirational growth, while following our values and guiding principles.This position is located at Trystar